610 resultados para Venturi
Resumo:
An exploratory investigation was conducted on the effects of application of ozone on the removal of organic and inorganic contaminants and the reduction of settleable solids in urban lake sediments. Homogenized sediment samples were treated in a batch reactor with an external recirculation loop and ozone feed from a Venturi injector. The ozone generating system was fed with ambient air with small footprint and operational simplicity. Ozone mass application (g/h) and contact time (min) were varied over wide ranges during testing. The effects of the ozone mass applied per unit time and the contact time on contaminant removal efficiencies were analyzed and a trade-off between the costs of ozonation and of solids treatment and disposal was proposed. The minimum ozone mass application required for total contaminant removal apparently depended on the type of organic contaminant present. An apparent influence of inorganic contaminant speciation on the removal efficiency was found and discussed.
Resumo:
Dissertação apresentada ao PPGA USCS, como requisito parcial para obtenção do título de Mestra em Administração. Área de Concentração: Gestão e Regionalidade.
Resumo:
Este trabalho teve como objetivo o desenvolvimento de uma nova técnica para determinação do tamanho médio e da distribuição de tamanho de bolhas de ar em meio aquoso. A nova técnica, denominada de LTM-BSizer, uma vez otimizada, foi aplicada na caracterização das bolhas geradas por diversos métodos utilizados tanto na flotação para tratamento de efluentes líquidos quanto na flotação de partículas minerais e, principalmente, na investigação de parâmetros operacionais e do efeito do tamanho de bolhas na flotação de partículas minerais (quartzo como modelo) finas (40-10 µm) e ultrafinas (<10 µm). A técnica LTM-BSizer é baseada no conceito da captura, ou seja, ao contrário das técnicas fotográficas até agora propostas, onde as imagens (fotos ou vídeos) das bolhas em movimento foram obtidas com visores verticais, este método obteve as imagens das bolhas estabilizadas em um visor disposto na horizontal. Entre as vantagens em relação aos métodos fotográficos existentes destacam-se a melhor qualidade das imagens e a capacidade de medir distribuições de tamanho de bolha com grande amplitude, desde microbolhas (<100 µm) até bolhas maiores (~ 1 a 3 mm). Os métodos de geração de bolhas pesquisados foram: microbolhas geradas por despressurização de água saturada com ar em um vaso saturador (processo de flotação por ar dissolvido-FAD) ou por uma bomba centrífuga multifase (novo equipamento para geração de microbolhas), injeção de mistura ar-líquido através de um constritor tipo venturi (destaque na flotação não convencional), injeção de ar em cilindro inox poroso (comumente aplicado para dispersão de gás) e bolhas geradas em uma célula de flotação por ar induzido (FAI), convencional de bancada Para todos os métodos citados, exceto o último, a distribuição de tamanho de bolha foi avaliada numa coluna em acrílico com 200 cm de altura e 72 mm de diâmetro, onde através de um ponto de amostragem parte do fluxo foi conduzida até o visor. Os resultados obtidos com esta técnica foram, para os diâmetros médios de bolha: 30 a 70 µm para FAD, 65 a 130 µm para bomba multifase, 200 a 1400 µm para venturi, 500 a 1300 µm para FAI e 500 a 1000 µm para o cilindro poroso. A influência de alguns parâmetros operacionais na formação das bolhas foi estudada em detalhe e os resultados obtidos mostraram uma boa correspondência com os valores encontrados na literatura e em outros casos, elucidaram efeitos considerados contraditórios na literatura técnica. Este trabalho demonstrou que, o tamanho médio e a distribuição de tamanho das microbolhas, não são influenciados pela pressão de saturação no intervalo de 294 a 588 kPa, mas sim pela quantidade de bolhas e pelo tempo de retenção Também foi constatado que a diminuição da tensão superficial da água (adição de 30 mg/L de oleato de sódio) aumenta consideravelmente (3 a 8 vezes) o número de microbolhas na FAD a baixas pressões de saturação (196 e 294 kPa). O tamanho e a distribuição de tamanho de bolhas geradas em constrições de fluxo tipo venturi variam em função dos parâmetros concentração de tensoativo, velocidade superficial de líquido (UL) e razão gás/líquido (Qr). Uma pequena diminuição da tensão superficial, de 73 para 68 mN/m, provocada pela adição de 20 mg/L do tensoativo DF 250, foi suficiente para diminuir consideravelmente o tamanho das bolhas geradas, permanecendo constante para concentrações maiores, sugerindo que esta seja a concentração crítica de coalescência (CCC) para este sistema. Um aumento de UL (mantendo Qr constante) e diminuição de Qr (com UL constante) levaram a distribuições com menor amplitude e diâmetro médio. No caso das microbolhas geradas através da bomba multifase, o tamanho de bolhas diminuiu com a pressão até atingir o limite de solubilidade teórico ar/líquido. O tamanho das bolhas gerados através de placa porosa e FAI apresentaram boa correspondência com os reportados na literatura e em ambas as técnicas foi, de novo, encontrada, para DF 250, a mesma CCC igual a 20 mg/L. O sistema de flotação de partículas finas e ultrafinas, foi estudado via recuperação de finos de quartzo (50% < 10µm) em coluna de laboratório. As variáveis estudadas foram; a distribuição de tamanho de bolhas e a concentração de coletor (amina). Os resultados obtidos mostraram que a recuperação das frações mais finas aumenta com a diminuição do tamanho de bolhas de acordo com os modelos existentes de flotação. Entretanto, foi encontrado, na captura de partículas ultrafinas pelas bolhas, um valor ótimo de tamanho de partícula. Assim, a captura diminui com o tamanho de partícula até 5-7 µm e aumenta, de novo, nas frações menores. Esses resultados são discutidos em termos de um mecanismo de difusão como fenômeno predominante nos mecanismos de adesão bolha-partícula.
Resumo:
Esta dissertação analisa os principais fatores, atores e contexto político que levaram o tema das políticas públicas de juventude adentrar na agenda governamental, culminando na criação da política nacional da juventude em 2005. Entende-se como política nacional de juventude os seguintes elementos: Secretaria Nacional de Juventude, Conselho Nacional de Juventude e Programa Nacional de Inclusão de Jovens (ProJovem). Analisou-se o período de 2002 a 2005, quatro anos determinantes para os diferentes atores promoverem o tema da política de juventude, bem como elaborarem alternativas de políticas e promoverem o processo de definição do problema, na perspectiva de J. Kingdon. O postulado deste autor quanto a três fluxos à tomada de decisão de políticas públicas – problema, políticas públicas e política – foi usado ao longo da dissertação, servindo de referencial teórico para compreender o movimento e entrada do tema juventude na agenda. Em termos metodológicos, sistematizou-se a literatura a respeito da juventude em dimensões diversas. Foram realizados questionários e entrevistas qualitativas com atores responsáveis e participantes dos diferentes processos e fluxos envolvidos na discussão da política nacional de juventude. As entrevistas evidenciaram que as diferentes dinâmicas analisadas – Projeto Juventude, Comissão de Juventude da Câmara, grupo interministerial de juventude – aglutinaram diferentes atores conferindo legitimidade e peso político à pauta. Embora houvesse disputas de fundo ideológico entre eles sobre a concepção das políticas públicas de juventude, houve relativa unidade e consenso a respeito da necessidade da institucionalização do tema. As políticas públicas são um campo multidisciplinar que possibilita a análise de um problema por diferentes enfoques. O campo das políticas de juventude congrega diferentes atores com lógicas de atuação diferentes; portanto, para analisar as políticas de juventude foi necessário compreender tais lógicas à luz de um referencial da agenda governamental.
Resumo:
This study focuses on the building ensemble of Avenida Roberto Freire, a main road in Natal, Brazil, as a material expression of the confluence of various factors among which the following may be emphasized: high level of accessibility due to urban spatial re-structuring and the growth of the real estate market, in view of the increasing number of consumers, who arrived in Natal within the last decades. The intense urban modification process that has been going on in Natal since at least the 1980s, has engendered the formation of long axial lines which express the expansion dynamics and some of the forces subjacent to it. Avenida Roberto Freire has been an iconic example of an urban thoroughfare where architecture becomes primarily a communication support that can be perceived by fast moving passers-by, what brings it close to the venturian concept of strip (Venturi at al, 1972). The building types that line the road not only respond to the dynamics in process but also contribute to intensify it, as they house a variety of uses which attract people and generate more movement. The dynamics is further strengthened by the action of the real estate business which benefits from the increase of highly accessible locations, and from the private and public investments and incentives to tourism that aim to insert this city into the globalized world. Although the intention of reconstituting part of the history of density increase on this avenue in a diachronical perspective was attempted within the limits of the available references and documentation, the central contribution of this study is to understand the relations between topological accessibility and the typological nature of the building ensemble. By observing the synchronic morphological frame resulting from the spatial configuration analysis pertinent to this avenue (cf. Hillier and Hanson,1984) and the inventory and classification of the building ensemble there existing, this study aims to understand how architecture responds to accessibility in view of the real estate pressure, boosted by a cosmopolitanizing process brought about by the continuous flow of foreign and Brazilian arrivals as visitors, temporary or permanent residents
Resumo:
The nanometric powders have special features that usually result in new properties, originating applications or expanding them in various fields of knowledge. Because having a high area/volume ratio, phenomena such as superficial strength of adsorption becomes greater than the weight of the powder which makes more difficult its handling. The high power of agglomeration of these powders requires study and development of equipments to enable its management into the plasma torch. The objective of this work is to develop a powder feeder which can solve the mainly problems about insertion of powder into the thermal spray developed in the laboratory of plasmas, which are carried out with plasma torch arc not transferred (plasma spray). Therefore, it was made a aluminum s powder feeder and tests were performed to verify their operation and determine its rate of deposition by spraying powders of niobium pentoxide (Nb2O5) and titanium dioxide (TiO2) with particle sizes less than 250 mesh (<0.063 mm). We used masses of 0.5 g - 1.0 g and 1.5 g of each powder in tests lasting 15 seconds - 20 to 25 seconds for each mass. The tests were performed in two ways: at atmospheric pressure using argon gas with a flow of 9 l / min as carrier gas and through a Venturi pipe also using argon gas with a flow of 9 l / min as carrier gas and with a flow of 20 l/min as the feed gas passing through the Venturi pipe. The powder feeder developed in this paper is very easy to be handling and building, resulting in feeding rate of 0.25 cm3/min - 1.37 cm3/min. The TiO2 showed higher feeding rates than the Nb2O5 in all tests, and the best rates were obtained with tests using mass 1.5 g and time of 15 seconds, reaching feeding rate of 1.37 cm3/min. The flow of feed had low interference in feeding rate during the tests
Resumo:
CMS is a general purpose experiment, designed to study the physics of pp collisions at 14 TeV at the Large Hadron Collider ( LHC). It currently involves more than 2000 physicists from more than 150 institutes and 37 countries. The LHC will provide extraordinary opportunities for particle physics based on its unprecedented collision energy and luminosity when it begins operation in 2007. The principal aim of this report is to present the strategy of CMS to explore the rich physics programme offered by the LHC. This volume demonstrates the physics capability of the CMS experiment. The prime goals of CMS are to explore physics at the TeV scale and to study the mechanism of electroweak symmetry breaking - through the discovery of the Higgs particle or otherwise. To carry out this task, CMS must be prepared to search for new particles, such as the Higgs boson or supersymmetric partners of the Standard Model particles, from the start- up of the LHC since new physics at the TeV scale may manifest itself with modest data samples of the order of a few fb(-1) or less. The analysis tools that have been developed are applied to study in great detail and with all the methodology of performing an analysis on CMS data specific benchmark processes upon which to gauge the performance of CMS. These processes cover several Higgs boson decay channels, the production and decay of new particles such as Z' and supersymmetric particles, B-s production and processes in heavy ion collisions. The simulation of these benchmark processes includes subtle effects such as possible detector miscalibration and misalignment. Besides these benchmark processes, the physics reach of CMS is studied for a large number of signatures arising in the Standard Model and also in theories beyond the Standard Model for integrated luminosities ranging from 1 fb(-1) to 30 fb(-1). The Standard Model processes include QCD, B-physics, diffraction, detailed studies of the top quark properties, and electroweak physics topics such as the W and Z(0) boson properties. The production and decay of the Higgs particle is studied for many observable decays, and the precision with which the Higgs boson properties can be derived is determined. About ten different supersymmetry benchmark points are analysed using full simulation. The CMS discovery reach is evaluated in the SUSY parameter space covering a large variety of decay signatures. Furthermore, the discovery reach for a plethora of alternative models for new physics is explored, notably extra dimensions, new vector boson high mass states, little Higgs models, technicolour and others. Methods to discriminate between models have been investigated. This report is organized as follows. Chapter 1, the Introduction, describes the context of this document. Chapters 2-6 describe examples of full analyses, with photons, electrons, muons, jets, missing E-T, B-mesons and tau's, and for quarkonia in heavy ion collisions. Chapters 7-15 describe the physics reach for Standard Model processes, Higgs discovery and searches for new physics beyond the Standard Model.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Search for the standard model Higgs boson decaying to bottom quarks in pp collisions at root s=7 TeV
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)