Journal of the American Society of Naval Engineers, inc

Mode of access: Internet.

Naval engineers journal.

Chemical abstracts

Les navires vikings : conception géométrique et architecture traditionnelle au Moyen Âge scandinave.

Selon l’image reçue des Vikings, ce peuple incarne l'esprit d’une immense solidarité primitive ayant su résister rudement au joug du christianisme et à la domination du Latin en Europe occidentale. Cette image n’est pas sans ses contradictions et, s’il est vrai que l’écriture était encore inconnue en Scandinavie durant les premiers siècles de l’expansion viking, on sait maintenant que le commerce et la colonisation, autant que les célèbres raids, motivèrent l’irruption des peuples scandinaves sur la scène médiévale. Quant aux navires de ces marchands, colonisateurs, pêcheurs et guerriers, ils apparaissent, un peu à l’image des Vikings eux-mêmes, sur le grand tableau de l’histoire nautique sous l’enseigne d’une originalité et d’une technicité sans parallèle. Comment les Vikings construisaient-ils leurs navires, en leur donnant une symétrie, un équilibre et une finesse si achevés? Les premiers ethnologues qui se sont intéressés à cette question ont privilégié les idées issues d'une tradition acquise par des générations de constructeurs, et d'astuces simples pour équilibrer tribord et bâbord. Puis, ils se sont rapidement tournés vers les techniques inhérentes à la construction à clin : utilisation de planches fendues et non sciées et de rivets abondants témoignant d’une sidérurgie acquise depuis peu. Le problème que présentent ces navires, est que leur construction artisanale demeure conforme à l’image reçue des Vikings, mais que leur conception architecturale, réalisée selon des connaissances théoriques très exactes, brise la notion d’une Scandinavie médiévale illettrée et coupée des grands centres du savoir. Ce travail s’intéresse précisément à la conception architecturale des navires scandinaves du VIIIe au XIe siècle pour montrer comment ils s’insèrent dans un haut savoir européen dès leur apparition. Il explore ensuite les liens qui unissent ce savoir théorique aux aspects véritablement originaux des navires vikings, en l’occurrence leur construction à clin et leur homogénéité sur une grande région à travers plus de cinq siècles. Au terme de cette recherche, l'analyse réalisée sur le maître-couple de trois épaves vikings, une épave antique et une épave scandinave pré-viking, a permis de mettre en évidence plusieurs indices de l'utilisation du système de conception géométrique apparaissant pour la première fois dans les traités d'architecture navale de la Renaissance, et ce, sur chacune de ces épaves. Les résultats obtenus démontrent qu'il est possible d'employer un système transversal de conception pour des navires vraisemblablement construits bordé premier et assemblés à clin.

Integrated learning of computer applications for production engineering

A high productivity rate in Engineering is related to an efficient management of the flow of the large quantities of information and associated decision making activities that are consubstantial to the Engineering processes both in design and production contexts. Dealing with such problems from an integrated point of view and mimicking real scenarios is not given much attention in Engineering degrees. In the context of Engineering Education, there are a number of courses designed for developing specific competencies, as required by the academic curricula, but not that many in which integration competencies are the main target. In this paper, a course devoted to that aim is discussed. The course is taught in a Marine Engineering degree but the philosophy could be used in any Engineering field. All the lessons are given in a computer room in which every student can use each all the treated software applications. The first part of the course is dedicated to Project Management: the students acquire skills in defining, using Ms-PROJECT, the work breakdown structure (WBS), and the organization breakdown structure (OBS) in Engineering projects, through a series of examples of increasing complexity, ending up with the case of vessel construction. The second part of the course is dedicated to the use of a database manager, Ms-ACCESS, for managing production related information. A series of increasing complexity examples is treated ending up with the management of the pipe database of a real vessel. This database consists of a few thousand of pipes, for which a production timing frame is defined, which connects this part of the course with the first one. Finally, the third part of the course is devoted to the work with FORAN, an Engineering Production package of widespread use in the shipbuilding industry. With this package, the frames and plates where all the outfitting will be carried out are defined through cooperative work by the studens, working simultaneously in the same 3D model. In the paper, specific details about the learning process are given. Surveys have been posed to the students in order to get feed-back from their experience as well as to assess their satisfaction with the learning process. Results from these surveys are discussed in the paper

Ships of minimum wave resistance / by John V. Wehausen, G. Reichert, J.R. Gauthey.

Mode of access: Internet.

Marine review.

Includes section "Book Reviews".

Engineering mechanics : a revision of "Notes on machine design,"

Interleaved.

Yearbook.

At head of title: The Society of Naval Architects and Marine Engineers.

Naval reciprocating engines and auxiliary machinery.

Mode of access: Internet.

Transactions /

Mode of access: Internet.

Handbook for the care and operation of naval machinery,

Mode of access: Internet.

Manual, valve repair and maintenance for naval service. Boston Naval Shipyards. Navships 250-648.

Mode of access: Internet.

Applications de géométrie et de méchanique : à la marine aux ponts et chaussées, etc., pour faire suite aux Développements de géométrie /

I. De la stabilité des corps flottants -- II. Du tracé des routes Isolées -- III. Sur le tracé des routes, dans les débiais et les rembials -- IV. Sur les routes sulvies par la lumiére et par les corps élastiques, en général, dans les phénoménes de la réflexion et de la réfraction -- V. Examen théorique de la structure des vaisseaux angials.

VEGETABLE OIL STRUCTURE AND ANTIOXIDANTS

Five vegetable oils: canola, soybean, corn, cottonseed and sunflower oils were characterized with respect to their composition by gas chromatography and viscosity. The compositions of the vegetable oils suggest that they exhibit substantially different propensity for oxidation following the order of: canola < corn < cottonseed < sunflower approximate to soybean. Viscosities at 40 degrees C and 100 degrees C and the viscosity index (VI) values were determined for the vegetable oils and two petroleum oil quenchants: Microtemp 157 (a conventional slow oil) and Microtemp 153B (an accelerated or fast oil). The kinematic viscosities of the different vegetable and petroleum oils at 40 degrees C were similar. The VI values for the different vegetable oils were very close and varied between 209-220 and were all much higher than the VI values obtained for Microtemp 157 (96) and Microtemp 153B (121). These data indicate that the viscosity variations of these vegetable oils are substantially less sensitive to temperature variation than are the parafinic oil based Microtemp 157 and Microtemp 153B. Although these data suggest that any of the vegetable oils evaluated could be blended with minimal impact on viscosity, the oxidative stability would surely be substantially impacted. Cooling curve analysis was performed on these vegetable oils at 60 degrees C under non-agitated conditions. These results were compared with cooling curves obtained for Microtemp 157, a conventional, unaccelerated petroleum oil, and Microtemp 153B, an accelerated petroleum oil under the same conditions. The results showed that cooling profiles of the different vegetable oils were similar as expected from the VI values. However, no boiling was observed wit any of the vegetable oils and heat transfer occurs only by convection since there is no full-film boiling and nucleate boiling process as typically observed for petroleum oil quenchants, including those of this study. Therefore, high-temperature cooling is considerable faster for vegetable oils as a class. The cooling properties obtained suggest that vegetable oils would be especially suitable fur quenching low-hardenability steels such as carbon steels.

Influence of the slice position on chloride migration tests for concrete in marine conditions

Chloride migration tests are used to measure the concrete capacity to inhibit chloride attack. Many researchers carry out this test in a slice of concrete extracted from the central part of cylindrical specimens, discarding about 75% of the concrete used to mold the specimens. This fact generated the question: would it be possible to extract more slices from a same specimen without losing the confidence in the results? The main purpose of this work is to answer this question. Moreover, another aim of this study was to show the difference of chloride penetration between finished faces and the formwork surfaces of concrete beams and slabs. The results indicated that it is possible to use more slices of a single specimen for a chloride migration test. Moreover, it was demonstrated that there is a significant difference of chloride penetration between the finished surface and the formwork surface of the specimens. (C) 2008 Elsevier Ltd. All rights reserved.