958 resultados para Universal Design (UD)
Resumo:
Surface modification by means of nanostructures is of interest to enhance boiling heat transfer in various applications including the organic Rankine cycle (ORC). With the goal of obtaining rough and dense aluminum oxide (Al2O3) nanofilms, the optimal combination of process parameters for electrophoretic deposition (EPD) based on the uniform design (UD) method is explored in this paper. The detailed procedures for the EPD process and UD method are presented. Four main influencing conditions controlling the EPD process were identified as nanofluid concentration, deposition time, applied voltage and suspension pH. A series of tests were carried out based on the UD experimental design. A regression model and statistical analysis were applied to the results. Sensitivity analyses of the effect of the four main parameters on the roughness and deposited mass of Al2O3 films were also carried out. The results showed that Al2O3 nanofilms were deposited compactly and uniformly on the substrate. Within the range of the experiments, the preferred combination of process parameters was determined to be nanofluid concentration of 2 wt.%, deposition time of 15 min, applied voltage of 23 V and suspension pH of 3, yielding roughness and deposited mass of 520.9 nm and 161.6 × 10− 4 g/cm2, respectively. A verification experiment was carried out at these conditions and gave values of roughness and deposited mass within 8% error of the expected ones as determined from the UD approach. It is concluded that uniform design is useful for the optimization of electrophoretic deposition requiring only 7 tests compared to 49 using the orthogonal design method.
Resumo:
In Australia as far back as 1993, researchers such as Baladin and Chapmen reported that "18% of the total Australian population and 51% of the population over 60 years of age were identified as having a disability" (2001; p38.2). Statistics such as these are not by any means astonishing, even to members of the general public, and it is widely understood that these are only to increase significantly in our near future. What is particularly surprising however is, in the face of such statistics, the lack of new and creative responses to this demographic shift, particularly by the architecture and construction industries. The common response from a range of sectors seems to be the repetition of a series of models which offer limited, and often undesirable, housing options. It is this against this backdrop, characterized by a lack of original options from mainstream practitioners and relevant government bodies, that the need has arisen to develop alternative models at grass-roots level. This paper reports primarily on the work of one group comprising a not-for-profit organization, a pro-bono design practice group and a local university working together to design a more holistic, emotionally sustainable independent living model of housing for families where a member of the family has a disability. This approach recognizes the limitations of universal design in that it often does not " ... meet all the housing needs that arise for people with moderate to severe disabilities" (Scotts, Margie et al, 2007; p.17). It is hoped that by examining the work of such a collective which is not driven by profit or policy, but rather born with the aim to address first and foremost individual and community need, that better insight can be gained into the real requirements of individuals and families as well as open up a view to new ways of fulfilling them.
Resumo:
The lack of inclusive housing in Australia contributes to the marginalization and exclusion of people with disability and older people from family and community life. The Australian government has handed over the responsibility of increasing the supply of inclusive housing to the housing industry through an agreed national access standard and a voluntary strategy. Voluntary strategies have not been successful in other constituencies and little is known about what would work in Australia today. Findings from a research project into the voluntariness of the housing industry indicate that a reliable and consistent supply is unlikely without an equivalent increase in demand. The strategy has, however, an important role to play in the task of changing housing industry practices towards building more inclusive communities.
Resumo:
This paper documents a preliminary investigation into the relationship between neurodiversity and the built environment using a pilot project developed with Logan City Council and engaging candidates within the Master of Urban Design at the Queensland University of Technology. The research begins to examine the way many places are designed and built can be alienating and inhibit accessibility to people with movement and sensory differences. Logan Central has been used as a case study area to map the physical attributes, and identify barriers and challenges in the built environment – specifically for people with disabilities but also taking in consideration the wider population. The integration of all individuals – mainstream, those with disability, differences and multigenerational populations – strengthens the social and economic fabric of Australia, enabling its citizens to live healthy, productive, and fulfilling lives.
Resumo:
A key challenge for the 21st Century is to make our cities more liveable and foster economically sustainable, environmentally responsible, and socially inclusive communities. Design thinking, particularly a human-centred approach, offers a way to tackle this challenge. Findings from two recent Australian research projects highlight how facilitating sustainable, liveable communities in a humid sub-tropical environment requires an in-depth understanding of people’s perspectives, experiences and practices. Project 1 (‘Research House’) documents the reflections of a family who lived in a ‘test’ sustainable house for two years, outlining their experience and evaluations of universal design and sustainable technologies. The study family was very impressed with the natural lighting, natural ventilation, spaciousness and ease of access, which contributed significantly to their comfort and the liveability of their home. Project 2 (‘Inner-Urban High Density Living’) explored Brisbane residents’ opinions about high-density living, through a survey (n=636), interviews (n=24), site observations (over 300 hours) and environmental monitoring, assessing opinions on the liveability of their individual dwelling, the multi-unit host building and the surrounding neighbourhood. Nine areas, categorised into three general domains, were identified as essential for enhancing high density liveability. In terms of the dwelling, thermal comfort/ventilation, natural light, noise mitigation were important; shared space, good neighbour protocols, and support for environmentally sustainable behaviour were desired in the building/complex; and accessible/sustainable transport, amenities and services, sense of community were considered important in the surrounding neighbourhood. Combined, these findings emphasise the importance and complexity associated with designing liveable building, cities and communities, illustrating how adopting a design thinking, human-centred approach will help create sustainable communities that will meet the needs of current and future generations.
Resumo:
Millions of people with print disabilities are denied the right to read. While some important efforts have been made to convert standard books to accessible formats and create accessible repositories, these have so far only addressed this crisis in an ad hoc way. This article argues that universally designed ebook libraries have the potential of substantially enabling persons with print disabilities. As a case study of what is possible, we analyse 12 academic ebook libraries to map their levels of accessibility. The positive results from this study indicate that universally designed ebooks are more than possible; they exist. While results are positive, however, we also found that most ebook libraries have some features that frustrate full accessibility, and some ebook libraries present critical barriers for people with disabilities. Based on these findings, we consider that some combination of private pressure and public law is both possible and necessary to advance the right-to-read cause. With access improving and recent advances in international law, now is the time to push for universal design and equality.
Resumo:
Rove n Rave ™ is a website designed and created for, and with, people with an intellectual disability. Its aim is to provide them with a user-friendly online platform where they can share opinions and experiences, and where they can find reviews which will help them to choose a place to visit themselves. During the development process, input on design requirements was gathered from a group of people with an intellectual disability and the disability service provider. This group then tested the product and provided further feedback on improving the website. It was found that the choice of wording, icons, pictures, colours and some functions significantly affected the users' ability to understand the content of the website. This demonstrated that a partnership between the developer and the user is essential when designing and delivering products or services for people with an intellectual disability.
Resumo:
Older adults report a desire to remain within the preferred environment for as long as possible. This desire is referred to as aging-in-place. Aging-in-place integrates housing and care options. Factors affecting the ability to remain within the preferred environment include current home designs, access to housing choices, social support networks, and community services, to name a few. Research supports physical and psychosocial benefits of aging-in-place for the individual. Home modifications have the potential to influence the quality of life in a number of positive directions that range from personal mobility to community engagement. Modifications range from minor to significant. Financial resources, contractor interest and expertise, consumer awareness and consumer opportunity affect the degree of change. Increasingly, construction professionals express an interest in learning more about aging-in place. Queries ranged from obtaining a greater understanding of the meaning of the concept, impact of demographic change on housing stock, and increased awareness of universal design features. This paper presents findings from a survey administered to current members of the Canadian Home Builders’ Association – Calgary Regional Office. Within this presentation, we report findings on members understanding of demographic change and the effect of this change on the current and future housing stock. We discuss perceived barriers and benefits of the development of business models to support aging-in-place. Finally, we conclude with discussion of educational support to enhance the understanding of aging-in-place.
Resumo:
Taking a more integrated approach to planning our neighbourhoods for the continuum of inhabitants’ ages and abilities makes sense given our current and future population composition. Seldom are the built environment requirements of diverse groups (e.g. children, seniors, and people with disability) synthesised, resulting in often unfriendly and exclusionary neighbourhoods. This often means people experience barriers or restriction on their freedom to move about and interact within their neighbourhood. Applying universal design to neighbourhoods may provide a bridging link. By presenting two cases from South-East Queensland (SEQ), Australia, through the lenses of different ages and abilities - older children with physical disabilities and their families (Stafford 2013, 2014) and seniors (Baldwin et al. 2012), we intend to increase recognition of users' needs and stimulate the translation of knowledge to the practice of planning inclusive neighbourhoods.
Resumo:
Esta tese apresenta uma proposta teórico-metodológica baseada no conceito de cultura profissional, visando à análise da dimensão cultural do trabalho técnico em gestão em saúde, que tem na categoria cultura profissional e nas suas subcategorias constitutivas trajetória, identidade social e reflexividade interativa as bases desta investigação. Neste sentido, busca compreender a dimensão cultural deste trabalho ao problematizar as questões que atravessam a vida laboral dos trabalhadores técnicos de saúde, ou seja, como eles compreendem a realidade em que vivem, quais trajetórias formativas e profissionais os levam a este lugar, quais os laços identitários os unem enquanto grupo, e também quais são seus espaços de decisão e de elaboração crítica das questões que atravessam seu cotidiano de trabalho. Num mesmo movimento, esta proposição reafirma o materialismo histórico dialético como o método de análise deste estudo, apresentando os pares dialéticos utilizados na interpretação dos dados coletados no trabalho empírico. A hipótese deste estudo é que a análise da dimensão cultural deste trabalho técnico, a partir do referencial marxista, permite captar a dinâmica interacional deste grupo e relacioná-la com as questões econômicas e políticas que afetam o trabalho na sociedade contemporânea. Os resultados encontrados indicam a pertinência desta proposta para compreensão dos conflitos e contradições que perpassam a dimensão cultural do referido trabalho, assim como o aprofundamento deste debate permite avançar num projeto de qualificação para estes trabalhadores, em torno do desenvolvimento de uma proposta de formação humana que permita criticar e transformar este trabalho, ao mesmo tempo em que reafirma o projeto de saúde pública universal
Resumo:
As infraestruturas de televisão interativa atualmente existentes possibilitam a integração de uma grande variedade de recursos e serviços, possibilitando aos utilizadores novas experiências de interação e participação. Para a maioria dos telespetadores, o uso de serviços interativos não acarreta grandes dificuldades; no entanto, para públicos com necessidades especiais, por exemplo para pessoas com défice visual, essa tarefa torna-se complexa, dificultando, ou mesmo impedindo, que estes utilizadores possam beneficiar deste tipo de serviços. Portugal não é uma exceção neste contexto, existindo um número significativo de utilizadores com défice visual (UDV) que não beneficiam totalmente das potencialidades do paradigma televisivo atual. Neste âmbito, o projeto de investigação que suporta esta tese explora a problemática do Design Universal aplicado à Televisão Interativa (iTV) e tem como objetivos a conceptualização, prototipagem e validação de um serviço de iTV adaptado especificamente a UDV, visando promover a sua inclusão digital. Para cumprir estes objetivos, a investigação dividiu-se em três etapas distintas. Na primeira etapa, a partir da Teoria Fundamentada nos Dados, foram identificadas as dificuldades e necessidades dos UDV enquanto consumidores de conteúdos televisivos e serviços de audiodescrição; foi selecionada a plataforma tecnológica mais adequada para o suporte do serviço prototipado; e foi definido um conjunto de princípios orientadores de design (POD’s) de interfaces de televisão interativa específico para este público-alvo. Inicialmente foram efetuadas duas entrevistas a 20 participantes com défice visual, para determinar as suas dificuldades e necessidades enquanto consumidores de conteúdos televisivos e serviços de audiodescrição. De seguida, foi realizada uma entrevista a um perito responsável pelo processo de transição para a TDT em Portugal (inicialmente considerou-se que a TDT seria uma plataforma promissora e poderia suportar o protótipo) e efetuada a revisão da literatura sobre POD’s para o desenvolvimento de interfaces para serviços iTV dirigidos a pessoas com défice visual. A partir dos resultados obtidos nesta etapa foi possível definir os requisitos funcionais e técnicos do sistema, bem como os seus PODs, tanto ao nível da componente gráfica, como de interação. Na segunda etapa foi concetualizado e desenvolvido o protótipo iTV adaptado a UDV ‘meo ad+’, com recurso à plataforma tecnológica IPTV da Portugal Telecom, seguindo os requisitos e os princípios de design definidos. Relativamente à terceira etapa, esta contemplou a avaliação do serviço prototipado, por parte de um grupo de participantes com défice visual. Esta fase do trabalho foi conduzida através do método de Estudo Avaliativo, possibilitando, através de testes de usabilidade e acessibilidade, complementados com entrevistas, compreender se o serviço prototipado ia efetivamente ao encontro das necessidades deste tipo de utilizadores, tendo-se observado que os participantes que estiveram envolvidos nos testes ao protótipo mostraram-se satisfeitos com as funcionalidades oferecidas pelo sistema, bem como com o design da sua interface.
Resumo:
Our perceptions of knowledge attainment have changed (Bezemer & Kress, 2010). The type of students our teachers once were is vastly different from the students they currently teach. We need our next generation to thrive in a dynamically, interactive world saturated with opportunities for meaning making (Kress & Selander, 2012). Our current students are responsible for continuing our society, but that does not mean we need them to become us (Gee, 2009). Rather desperately, we need them to be thinkers and expressive in a variety of modes. The world will be different when they take their rightful place as the next generation of leaders, and so too must their thinking be different (Cope & Kalantzis, 2000). This explanatory mixed-method study (Creswell, 2013; Mertens, 2014) involved an investigation into perceptions of new teachers regarding inclusive pedagogies like Universal Design for Learning (CAST, 2011). It specifically discusses the contemporary thinking of 44 new Ontario teachers regarding inclusive pedagogies in their teacher education as well as their relative intent to utilize them in their practice. This study reveals a distinct tone of skepticism and provides suggestions for the continued improvement of teacher education programs in this province.
Resumo:
Design para a deficiência, Design de reabilitação, Accessible Design, human-centred Design, usar-centred Design, Design Universal, Design para todos, Design Inclusivo – estes termos têm, ao longo dos últimos trinta anos, vindo a caracterizar uma tendência na abordagem do Design que passou de tentar compreender os problemas de acessibilidade em design a pessoas com deficiência e definir estratégias para aumentar a sua usabilidade (Vanderheiden & Vanderheiden, 1992) para a necessidade de compreender a forma como os produtos excluem utilizadores e procurar formas de eliminar essa exclusão e assim produzir produtos e serviços mais acessíveis. É um movimento que busca centrar o Design na pessoa humana, procurando incluir todos.