Structured Light System for Underwater Inspection Operations

In this work we propose the development of a stereo SLS system for underwater inspection operations. We demonstrate how to perform a SLS calibration both in dry and underwater environments using two different methods. The proposed methodology is able to achieve quite accurate results, lower than 1 mm in dry environments. We also display a 3D underwater scan of a known object size, a sea scallop, where the system is able to perform a scan with a global error lower than 2% of the object size.

Energy Harvesting for Autonomous Underwater Vehicles

In this study, energy production for autonomous underwater vehicles is investigated. This project is part of a bigger project called TURTLE. The autonomous vehicles perform oceanic researches at seabed for which they are intended to be kept operational underwater for several months. In order to ful l a long-term underwater condition, powerful batteries are combined with \micro- scale" energy production on the spot. This work tends to develop a system that generates power up to a maximum of 30 W. Latter energy harvesting structure consists basically of a turbine combined with a generator and low-power electronics to adjust the achieved voltage to a required battery charger voltage. Every component is examined separately hence an optimum can be de ned for all, and subsequently also an overall optimum. Di erent design parameters as e.g. number of blades, solidity ratio and cross-section area are compared for di erent turbines, in order to see what is the most feasible type. Further, a generator is chosen by studying how ux distributions might be adjusted to low velocities, and how cogging torque can be excluded by adapted designs. Low-power electronics are con gured in order to convert and stabilize heavily varying three-phase voltages to a constant, recti ed voltage which is usable for battery storage. Clearly, di erent component parameters as maximum power and torque are matched here to increase the overall power generation. Furthermore an overall maximum power is set up for achieving a maximum power ow at load side. Due to among others typical low velocities of about 0.1 to 0.5 m/s, and constructing limits of the prototype, the vast range of components is restricted to only a few that could be used. Hence, a helical turbine is combined in a direct drive mode to a coreless-stator axial- ux permanent-magnet generator, from which the output voltage is adjusted subsequently by a recti er, impedance matching unit, upconverter circuit and an overall control unit to regulate di erent component parameters. All these electronics are combined in a closed-loop design to involve positive feedback signals. Furthermore a theoretical con guration for the TURTLE vehicle is described in this work and a solution is proposed that might be implemented, for which several design tests are performable in a future study.

Financial reporting by European foundations

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Finance from the NOVA – School of Business and Economics

Transparency in financial reporting by European Foundations

The increasing role of the European Foundations, urges for more transparency. The prevalent accounting frameworks in which they operate and report their activities are mostly based on national laws. This lack of harmonization, limits comparison between European foundations. Thus, this Work Project analyzes the current financial reporting by European foundations, and evaluates the similarities, differences and data availability between countries. The research provides evidence about little information available, deficiency in the financial reporting, within and between countries. The research recommends the need to ensure uniformity by providing a clear definition for public-benefit purpose, harmonization of laws and financial reporting.

Masonry infill walls under blast loading using confined underwater blast wave generators (WBWG)

The vulnerability of the masonry envelop under blast loading is considered critical due to the risk of loss of lives. The behaviour of masonry infill walls subjected to dynamic out-of-plane loading was experimentally investigated in this work. Using confined underwater blast wave generators (WBWG), applying the extremely high rate conversion of the explosive detonation energy into the kinetic energy of a thick water confinement, allowed a surface area distribution avoiding also the generation of high velocity fragments and reducing atmospheric sound wave. In the present study, water plastic containers, having in its centre a detonator inside a cylindrical explosive charge, were used in unreinforced masonry infills panels with 1.7m by 3.5m. Besides the usage of pressure and displacement transducers, pictures with high-speed video cameras were recorded to enable processing of the deflections and identification of failure modes. Additional numerical studies were performed in both unreinforced and reinforced walls. Bed joint reinforcement and grid reinforcement were used to strengthen the infill walls, and the results are presented and compared, allowing to obtain pressure-impulse diagrams for design of masonry infill walls.

Underwater acoustic modem with streaming video capabilities

Oceans have shown tremendous importance and impact on our lives. Thus the need for monitoring and protecting the oceans has grown exponentially in recent years. On the other hand, oceans have economical and industrial potential in areas such as pharmaceutical, oil, minerals and biodiversity. This demand is increasing and the need for high data rate and near real-time communications between submerged agents became of paramount importance. Among the needs for underwater communications, streaming video (e.g. for inspecting risers or hydrothermal vents) can be seen as the top challenge, which when solved will make all the other applications possible. Presently, the only reliable approach for underwater video streaming relies on wired connections or tethers (e.g. from ROVs to the surface) which presents severe operational constraints that makes acoustic links together with AUVs and sensor networks strongly appealing. Using new polymer-based acoustic transducers, which in very recent works have shown to have bandwidth and power efficiency much higher than the usual ceramics, this article proposes the development of a reprogrammable acoustic modem for operating in underwater communications with video streaming capabilities. The results have shown a maximum data-rate of 1Mbps with a simple modulation scheme such as OOK, at a distance of 20 m.

Companies' OHS internal structures: Types and theoretical foundations

An organization manages to regulate, standardize and optimize its operations in a way that places health and safety first by considering Health, Safety, Environment and Ergonomics (HSEE). In order to provide a theoretical foundation for Companies’ Occupational Health and Safety Internal Structures (COHSIS) allowing the focus on safety, COHSIS and its fundamentals were reviewed and described based on a brief literature review, which have included both papers published in journals, as well as works made available by selected organizations with mature safety culture. Three COHSIS were defined for description of its fundamentals, enabling improve the usability of its terminologies and provide the mentioned theoretical foundation.

The foundations of zoology / by William Keith Brooks.

1899-1907

The foundations of zoology / by William Keith Brooks.

1899-1907

Conceptual Foundations of Modelling of Innovative Production Projects

At the moment there is a lack of methodological approaches to formalization of management of innovative projects relating to production systems, as well as to adaptation and practical use of the existing approaches. This article is about one potential approach to the management of innovative projects, which makes the building of innovative process models possible based on objective approach. It outlines the frameworks for the building of innovative project models, and describes the method of transition from conceptual modelling to innovative project management. In this case, the model alone and together with parameters used for evaluation of the project may be unique and depends on the special features of the project, preferences of decision-making person, and production and economic system in which it is to be implemented. Unlike existing approaches, this concept does not place any restrictions on types of models and makes it possible to take into account the specificities of economic and production systems. Principles embodied in the model allow its usage as a basis for simulation model to be used in one of specialized simulation systems, as well as for information system providing information support of decision-making process in production and economic systems both newly developed by the company (enterprise) and designed on the basis of available information systems that interact through the exchange of data. In addition, this article shows that the development of conceptual foundations of innovative project management in the economic and production systems is inseparable from the development of the theory of industrial control systems, and their comprehensive study may be reduced to a set of elements represented as certain algorithms, models and evaluations. Thus, the study of innovative process may be conducted in both directions: from general to particular, and vice versa.

Foundations for contest success functions

In the literature the outcome of contests is either interpreted as win probabilities or as shares of the prize. With this in mind, we examine two approaches to contest success functions. In the first we analyze the implications of contestants' incomplete information concerning the "type" of the contest administrator. While in the case of two contestants this approach can rationalize prominent contest success functions, we show that it runs into difficulties when there are more agents. Our second approach interprets contest success functions as sharing rules and establishes a connection to bargaining and claims problems which is independent of the number of contestants. Both approaches provide foundations for popular contest success functions and guidelines for the definition of new ones. Keywords: Endogenous Contests, Contest Success Function. JEL Classification: C72 (Noncooperative Games), D72 (Economic Models of Political Processes: Rent-Seeking, Elections), D74 (Conflict; Conflict Resolution; Alliances).

Expressive Political Behaviour: Foundations, Scope and Implications

A growing literature has focussed attention on ‘expressive’ rather than ‘instrumental’ behaviour in political settings - particularly voting A common criticism of the expressive idea is that its myriad possibilities make it rather ad hoc and lacking in both predictive and normative bite. We agree that no single clear definition of expressive behaviour has emerged to date, and no detailed foundations of specific expressive motivations have been provided, so that there are rather few specific implications drawn from the analysis of expressive behaviour. In response, we provide a foundational discussion and definition of expressive behaviour that accounts for a range of factors. We also discuss the content of expressive choice distinguishing between moral, social and emotional cases, and relate this more general account to the specific theories of expressive choice in the literature. Finally, we discuss the normative and institutional implications of expressive behaviour.

Longitudinal analysis of income-related health inequality: welfare foundations and alternative measures

This paper elaborates the approach to the longitudinal analysis of income-related health inequalities first proposed in Allanson, Gerdtham and Petrie (2010). In particular, the paper establishes the normative basis of their mobility indices by embedding their decomposition of the change in the health concentration index within a broader analysis of the change in “health achievement” or wellbeing. The paper further shows that their decomposition procedure can also be used to analyse the change in a range of other commonly-used incomerelated health inequality measures, including the generalised concentration index and the relative inequality index. We illustrate our work by extending their investigation of mobility in the General Health Questionnaire measure of psychological well-being over the first nine waves of the British Household Panel Survey from 1991 to 1999.