Identification of critical input variables for risk-based cost estimates for road maintenance and rehabilitation

An estimation of costs for maintenance and rehabilitation is subject to variation due to the uncertainties of input parameters. This paper presents the results of an analysis to identify input parameters that affect the prediction of variation in road deterioration. Road data obtained from 1688 km of a national highway located in the tropical northeast of Queensland in Australia were used in the analysis. Data were analysed using a probability-based method, the Monte Carlo simulation technique and HDM-4’s roughness prediction model. The results of the analysis indicated that among the input parameters the variability of pavement strength, rut depth, annual equivalent axle load and initial roughness affected the variability of the predicted roughness. The second part of the paper presents an analysis to assess the variation in cost estimates due to the variability of the overall identified critical input parameters.

Decision support in using fibre reinforced polymer (FRP) composites in rehabilitation of concrete bridge structures

This paper compares and reviews the recommendations and contents of the guide for the design and construction of externally bonded FRP systems for strengthening concrete structures reported by ACI committee 440 and technical report of Externally bonded FRP reinforcement for RC structures (FIB 14) in application of carbon fiber reinforced polymer (CFRP) composites in strengthening of an aging reinforced concrete headstock. The paper also discusses the background, limitations, strengthening for flexure and shear, and other related issues in use of FRP for strengthening of a typical reinforced concrete headstock structure such as durability, de-bonding, strengthening limits, fire and environmental conditions. A case study of strengthening of a bridge headstock using FRP composites is presented as a worked example in order to illustrate and compare the differences between these two design guidelines when used in conjunction with the philosophy of the Austroads (1992) bridge design code.

'Work it out': Evaluation of a chronic condition self-management program for urban Aboriginal and Torres Strait Islander people with or at risk of cardiovascular disease

This thesis evaluates a chronic condition self-management program for Aboriginal and Torres Strait Islander people in urban south-east Queensland who have or are at risk of cardiovascular disease. Outcomes showed short-term improvements for some anthropometry measures which could be a trend for improvement in other anthropometry indicators over the longer term. The program was of particular benefit for participants who had several social and emotional wellbeing conditions. The use of an Aboriginal and Torres Strait Islander conceptual framework was critical in undertaking culturally competent quantitative research in this project.

A survey of sewer rehabilitation in Malaysia: application of trenchless technologies

This work presents a review of applicable sewer rehabilitation options using trenchless technology in Malaysia. The typical problems faced in wastewater collection systems are analysed and factors that determine the selection method are outlined. This study also highlights the necessary steps to be taken prior to the rehabilitation work. The trenchless technology reviewed here comprises repair, renovation and replacement options. The cost-effectiveness of different rehabilitation methods was identified to assess the economic viability of various options in the Malaysian context. This study reveals that not all the trenchless technologies available in the market are suitable for use in Malaysia, mainly due to incompatibility of the rehabilitation materials used. Furthermore, as trenchless rehabilitation generally involves higher capital outlay than open-cut methods, the choice of rehabilitation method has to be made on a case-to-case basis.

An outpatient respiratory rehabilitation program:Findings from a community hospital

Objectives: To determine patient satisfaction with a community hospital's respiratory rehabilitation program and to assess changes in patient physical and emotional function and quality of life. Design: Pre- and post-program measures were made on a variety of physiological and psychosocial factors. A modified version of the Chronic Respiratory Disease Questionnaire was administered before and after the 8-week multidisciplinary and comprehensive respiratory rehabilitation program. The post-program questionnaire also included a number of service delivery and patient satisfaction and quality-of-life questions. Setting: Respiratory Rehabilitation Program at St. Joseph's Hospital, a community hospital in Brantford, Ont., in active partnership with the Brant County Lung Association. Brant County is located in Central West Ontario, and has both urban and rural areas and a population of approximately 125 000 people. Participants: Twenty-nine patients, with a diagnosis of moderate to severe chronic obstructive pulmonary disease (COPD) who were referred to the Fall 1997 and Spring 1998 programs, were enrolled in the study. Outcome measures: Changes in physical and emotional function, health knowledge, skills mastery, quality of life and satisfaction with the program. Results: Twenty-one of 29 patients completed the program. Statistically significant and clinically important improvements were found between all pre- and post-program evaluation scores (distance walked, fatigue, dyspnea, emotional function, skills mastery and health knowledge). Participants were very satisfied with the program and felt it improved their quality of life. Conclusion: The positive outcomes reported rom randomized controlled trials of respiratory rehabilitation programs can be achieved in a community hospital setting.

Sustainable urban criteria in the urban periphery of Guadalajara

The study of the growth of large cities, in the urban periphery or the peri-urban areas specifically, it relates to environmental degradation due to urbanization, if it is estimated that since 2008 more than half of the world population living in urban areas, this sector is affected as it presents overcrowding, segregation and deterioration of physical conditions, which will impact on the social aspects within localities. This great urban growth has usually developed with the lack of environmental planning.So it is necessary to include urban development, guidelines towards environmental conservation and rehabilitation of the territory. The future of cities will depend largely on the actions taken now. As urban development inevitably requires planning urban settlements through sustainable development so as to provide alternative technologies, based on the reality of Latin American countries.In the peripheral area of the Metropolitan Zone of Guadalajara, is taken as a case study of the town of La Venta del Astillero, which by its nature allows access and functionality to develop a set of criteria and indicators to urban sustainability, which can take as a model for other communities in the urban periphery.

Trends in referral to outpatient cardiac rehabilitation in the Hunter Region of Australia, 2002-2007

BACKGROUND: Cardiac rehabilitation (CR) is an underutilized evidence-based treatment. We described trends in referral to outpatient CR (OCR) and the factors associated with referral. DESIGN: Cross-sectional survey data provided by Hunter residents aged 20 years or older discharged from public hospitals in the region between 2002 and 2007 with an OCR eligible diagnosis were extracted from the Hunter New England Heart and Stroke Register database. METHODS: Trends in referral were determined using the chi test for trend. Factors associated with referral were examined using multiple logistic regression. RESULTS: Sixty-five percent (4971 of 7678) of patients provided sufficient data for inclusion in the analysis. Approximately half of the patients reported being referred to OCR. No increase over time was observed. Factors associated with referral were age less than 70 years, male sex, being married, urban residence, at least one admission to the tertiary referral hospital for cardiology, at least one admission for acute myocardial infarction, revascularization, no admissions for congestive heart failure, a self-reported history of high cholesterol, and no history of stroke or atrial fibrillation. CONCLUSION: Access to this treatment of proven benefit remained suboptimal despite the provision of new programs and expansion of existing programs. Automatic referral, which is recommended in Australia, should be standard practice.

The flower workshop in psychosocial rehabilitation: A pilot study

We report a pilot study with the Flower Workshop, a new modality of psychosocial rehabilitation group activity. Cognitive performance in schizophrenia and other mental conditions can be impaired depending on the tasks to be executed and their respective social context. The vulnerability of these individuals can be reduced by means of cognitive and socio-affective facilitation. We conducted a pilot study to introduce the Flower Workshop in a public Mental Health Service in the city of Ribeirao Preto (Sao Paulo-Brasil) with 12 participants during 18 months (2002-2003). With cognitive and socio-affective facilitation, participants were able to construct vases and make flower arrangements successfully.

The participation of the nutritionist in Primary Health Care in a large urban center

Nutritionists are important professionals for ensuring the implementation of health promotion, treatment and rehabilitation. However, their participation in primary healthcare from a quantitative standpoint is limited. The city of Sao Paulo has experienced an uneven urbanization process triggering new problems of insecurity in terms of food and nutrition. This article analyzes the performance of the primary healthcare nutritionist in a large urban center. It is a quantitative study that used data from the Municipal Health Department, population data of Sao Paulo and a semi-structured questionnaire applied in individual interviews. All regions of the city are found to have fewer nutritionists than the recommendation of the Federal Council of Nutritionists. There are 123 nutritionists in the basic healthcare network and 51 in the Family Health Support Nuclei (FHSN) (57.3%). Each nutritionist from the FHSN accompanies 7.1 family health strategy teams on average. The age groups corresponding to children are less frequently seen by nutritionists. Comparing the activities, the transition from a model of primary health care focused on individual care to a model that prioritizes group care was observed.

Mejora del comportamiento térmico de los morteros de cal aditivados y su empleo en la rehabilitación de inmuebles = Improvement of thermal behaviour of additived lime mortars and their use in rehabilitation of buildings

La envolvente de la edificación es la responsable de equilibrar el intercambio energético entre el interior y el exterior, por lo tanto cualquier actuación encaminada a la reducción del consumo energético ha de establecer, como uno de sus objetivos prioritarios, la mejora del comportamiento de la misma. Las edificaciones anteriores a 1940 constituyen la mayor parte de las existentes en áreas rurales y centros urbanos. En ellas, la repercusión de la fachada sobre las transmitancias globales pone de manifiesto la necesidad de intervención. Sin embargo, su elevada inercia térmica y los importantes saltos térmicos característicos de gran parte de España plantean la importancia de que aquélla se efectúe por el exterior. A tal respecto, la falta de disponibilidad de espesor suficiente para implantar sistemas tipo SATE deriva en que, frecuentemente, la única solución viable sea la de aislar por el interior perdiendo con ello la capacidad de acumulación térmica del muro y con el asociado riesgo de condensaciones. La amplia tradición en el empleo de revestimientos, especialmente en base de cal, permiten que éstos sean utilizados no sólo como elemento estético o de protección de la obra de fábrica antigua sino también para la mejora del comportamiento térmico del soporte, si se aprovecha el mecanismo de transmisión térmica por radiación. Éste es el objetivo de la presente Tesis Doctoral en la que se estudia la modificación de las propiedades radiantes de los morteros de revestimiento para la mejora de la eficiencia energética de las construcciones históricas, principalmente las constituidas por muros monolíticos, aunque podría ser de aplicación a otro tipo de construcciones compuestas por diversas capas. Como punto de partida, se estudió y revisó la documentación disponible sobre las investigaciones de las tres áreas científico-tecnológicas que convergen en la Tesis Doctoral: rehabilitación, material y comportamiento térmico, a partir de lo cual se comprobó la inexistencia de estudios similares al objeto de la presente Tesis Doctoral. Complementariamente, se analizaron los revestimientos en lo concerniente a los materiales que los constituyen, la composición de las mezclas y características de cada una de las capas así como al enfoque que, desde el punto de vista térmico, se estimaba más adecuado para la obtención de los objetivos propuestos. Basándonos en dichos análisis, se preseleccionaron ochenta materiales que fueron ensayados en términos de reflectancia y emisividad para elegir cuatro con los que se continuó la investigación. Éstos, junto con la cal elegida para la investigación y el árido marmóreo característico de la última capa de revestimiento, fueron caracterizados térmicamente, de forma pormenorizada, así como química y físicamente. Los fundamentos teóricos y los estudios preliminares desarrollados con distintos materiales, en estado fresco y endurecido, fueron empleados en la dosificación de componentes de las mezclas, en dos proporciones distintas, para el estudio del efecto del agregado. Éstas se ensayaron en estado fresco, para comprobar su adecuación de puesta en obra y prever su VI adherencia al soporte, así como en estado endurecido a 28 y 90 días de curado, para conocer las propiedades que permitieran prever su compatibilidad con aquél y estimar el alcance de la reducción de transferencias térmicas lograda. Además, se estudiaron las características generales de las mezclas que sirvieron para establecer correlaciones entre distintas propiedades y entender los resultados mecánicos, físicos (comportamiento frente al agua) y energéticos. Del estudio conjunto de las distintas propiedades analizadas se propusieron dos mezclas, una blanca y otra coloreada, cuyas características permiten garantizar la compatibilidad con la obra de fábrica antigua, desde el punto de vista físico y mecánico, y preservar la autenticidad de los revestimientos, en cuanto a la técnica de aplicación tradicional en sistemas multicapa. El comportamiento térmico de las mismas, sobre una obra de fábrica de 40 cm de espesor, se estimó, en estado estacionario y pseudo-transitorio, demostrándose reducciones del flujo térmico entre 16-48%, en condiciones de verano, y entre el 6-11%, en invierno, en función de la coloración y de la rugosidad de la superficie, en comparación con el empleo de la mezcla tradicional. Por lo que, se constata la viabilidad de los materiales compuestos propuestos y su adecuación al objetivo de la investigación. VII ABSTRACT The envelope is responsible for balancing the energy exchange between the inside and outside in buildings. For this reason, any action aimed at reducing energy consumption must establish, as one of its key priorities, its improvement. In rural areas and urban centers, most of the constructions were built before 1940. In them, the impact of the façade on the global transmittance highlights the need for intervention. However, its high thermal inertia and fluctuation of temperatures in the majority of Spain bring up that it should be placed outside the insulation. In this regard, the lack of availability of enough thickness to implement systems such as ETICS results in that often the only viable solution is to isolate the interior, losing thereby the wall’s heat storage capacity with the associated risk of condensation. The tradition in the use of renders, especially lime-based, allows us to use them not only as an aesthetic element or to protect the ancient masonry, but also for improved thermal performance of the support by taking advantage of the heat transfer mechanism by radiation. This is the aim of this Doctoral Thesis in which the modification of the radiative properties of lime mortars for renders to improve the energy efficiency of historic buildings, mainly composed of monolithic walls, is studied, although it could be applied to other structures composed of several layers. As a starting point, the available literature in the three scientific-technological areas that converge at the Doctoral Thesis: rehabilitation, material and thermal behaviour, was reviewed, and confirmed the absence of researches similar to this Doctoral Thesis. Additionally, the renders were studied with regard to the materials that constitute them, the composition of the mixtures and the characteristics of each layer, as well as to the approach which, from a thermal point of view, was deemed the most suitable for achieving the objectives sets. Based on thre aforementioned analysis, eighty materials tested in terms of reflectance and emissivity were pre-selected, to choose four with which the research was continued. Common marble sand, used in the last layer of the renders, together with the appointed materials and hydrated lime were characterized thermally, in detail, as well as chemically and physically. The theoretical bases and preliminary studies with different materials, in fresh and hardened state, were used in the dosage of the composition of the mixtures. In order to study their effect they were used in two different proportions, that is, ten mixtures in total. These were tested in their fresh state to evaluate their setting-up suitability and foresee their adhesion to the support, as well as in their hardened state, at 28 and 90 days of curing, to establish the properties which enabled us to anticipate their compatibility with the old masonry walls and estimate the scope of the reduction of heat transfers achieved. In addition, the general characteristics of the mixtures used to establish correlations and to understand the mechanical, physical and energy results were studied. Two mixtures, one white and one colored, were proposed as the result of the different properties analysed, whose characteristics allow the guarantee of mechanical and physical compatibility VIII with the old masonry and preserve the authenticity of the renders. The thermal behavior of both, applied on a masonry wall 40 cm thick, was estimated at a steady and pseudo-transient state, with heat flow reductions between 16-48% during summertime and 6-11% during wintertime, depending on the color and surface roughness, compared to the use of the traditional mixture. So, the viability of the proposed composite materials and their fitness to the aim of the research are established.

Thermal characterization of urban heat island (UHI) according to urban morphology of Madrid

Present research is framed within the project MODIFICA (MODelo predictivo - edIFIcios - Isla de Calor Urbana) aimed at developing a predictive model for dwelling energy performance under the urban heat island effect in order to implement it in the evaluation of real energy demand and consumption of dwellings as well as in the selection of energy retrofitting strategies. It is funded by Programa de I+D+i orientada a los retos de la sociedad 'Retos Investigación' 2013. The scope of our predictive model is defined by the heat island effect (UHI) of urban structures that compose the city of Madrid. In particular, we focus on the homogeneous areas for urban structures with the same urban and building characteristics. Data sources for the definition of such homogeneous areas were provided by previous research on the UHI of Madrid. The objective is to establish a critical analysis of climate records used for energy simulation tools, which data come from weather stations placed in decontextualized areas from the usual urban reality, where the thermal conditions differs by up to 6ºC. In this way, we intend to develop a new predictive model for the consumption and demand in buildings depending on their location, the urban structure and the associated UHI, improving the future energy rehabilitation interventions

Rehabilitation financing, RAA programs handbook. October 1968.

"This reprint includes TN no. 1 through 22. TN no. 20; transmitted a new chapter, chapter 23."

2008 application guidelines : Community Development Assistance Program : competitive housing rehabilitation.

The following activities are specifically identified as ineligible. 1. Construction of buildings, or portions thereof, used predominantly for the general conduct of government (e.g., city halls, courthouses, jails, police stations). 2. General government expenses. 3. Costs of operating and maintaining public facilities and services (e.g., mowing parks, replacing street light bulbs). 4. Servicing or refinancing of existing debt.