National apprenticeship and training standards for truck mechanics /

Mode of access: Internet.

Analysis of rules and regulations for steel coil truck transport /

Cover title.

Motor freight planning for the Chicago region /

Project numbers 10.100 and 83/3003.

Rules of the road for second division vehicles.

Mode of access: Internet.

Rules of the road for second division vehicles.

Title from cover.

Analysis of cargo tank integrity in rollovers : final report /

"FHWA contract: DOT-FH-9193."

Truck transport of hazardous chemicals : phosphorus pentasulfide.

Shipping list no.: 97-0029-P.

Analysis of an Intervention to Reduce Truck Drivers' Exposure to Whole-Body Vibration

Thesis (Master's)--University of Washington, 2016-06

Organisational learning, climate change and the tragedy of the commons in China

This paper ends with a brief discussion of climate change and suggests that a practical solution would be to transfer much of the current air, sea and long-haul trucking of intercontinental freight between China and Europe (and the USA) to maglev systems. First we review the potential of Asian knowledge management and organisational learning and contrast this against Western precepts finding that there seems to be little incentive to 'look after one's fellows' in China (and perhaps across Asia) outside of tight personal guanxi networks. This is likely to be the case in the intense production regions of China where little time is allowed for 'organisational learning' by the staff and there is little incentive to initiate 'knowledge management' by senior managers. Thus the 'tragedy of the commons' will be enacted by individuals, township, and provincial leaders upwards to top ministers - no one will care for the climate or pollution, only for their own group and their wealth creation prospects. Copyright © 2011 Inderscience Enterprises Ltd.

Juror need for cognition and sensitivity to methodological flaws in expert evidence

Two studies investigated the influence of juror need for cognition on the systematic and heuristic processing of expert evidence. U.S. citizens reporting for jury duty in South Florida read a 15-page summary of a hostile work environment case containing expert testimony. The expert described a study she had conducted on the effects of viewing sexualized materials on men's behavior toward women. Certain methodological features of the expert's research varied across experimental conditions. In Study 1 (N = 252), the expert's study was valid, contained a confound, or included the potential for experimenter bias (internal validity) and relied on a small or large sample (sample size) of college undergraduates or trucking employees (ecological validity). When the expert's study included trucking employees, high need for cognition jurors in Study 1 rated the expert more credible and trustworthy than did low need for cognition jurors. Jurors were insensitive to variations in the study's internal validity or sample size. Juror ratings of plaintiff credibility, plaintiff trustworthiness, and study quality were positively correlated with verdict. In Study 2 (N = 162), the expert's published or unpublished study (general acceptance) was either valid or lacked an appropriate control group (internal validity) and included a sample of college undergraduates or trucking employees (ecological validity). High need for cognition jurors in Study 2 found the defendant liable more often and evaluated the expert evidence more favorably when the expert's study was internally valid than when an appropriate control group was missing. Low need for cognition jurors did not differentiate between the internally valid and invalid study. Variations in the study's general acceptance and ecological validity did not affect juror judgments. Juror ratings of expert and plaintiff credibility, plaintiff trustworthiness, and study quality were positively correlated with verdict. The present research demonstrated that the need for cognition moderates juror sensitivity to expert evidence quality and that certain message-related heuristics influence juror judgments when ability or motivation to process systematically is low. ^

Investigation of the Impact of Dual-Lane Axle Spacing on Lateral Load Distribution, 2016

The spacing of adjacent wheel lines of dual-lane loads induces different lateral live load distributions on bridges, which cannot be determined using the current American Association of State Highway and Transportation Officials (AASHTO) Load and Resistance Factor Design (LRFD) or Load Factor Design (LFD) equations for vehicles with standard axle configurations. Current Iowa law requires dual-lane loads to meet a five-foot requirement, the adequacy of which needs to be verified. To improve the state policy and AASHTO code specifications, it is necessary to understand the actual effects of wheel-line spacing on lateral load distribution. The main objective of this research was to investigate the impact of the wheel-line spacing of dual-lane loads on the lateral load distribution on bridges. To achieve this objective, a numerical evaluation using two-dimensional linear elastic finite element (FE) models was performed. For simulation purposes, 20 prestressed-concrete bridges, 20 steel bridges, and 20 slab bridges were randomly sampled from the Iowa bridge database. Based on the FE results, the load distribution factors (LDFs) of the concrete and steel bridges and the equivalent lengths of the slab bridges were derived. To investigate the variations of LDFs, a total of 22 types of single-axle four-wheel-line dual-lane loads were taken into account with configurations consisting of combinations of various interior and exterior wheel-line spacing. The corresponding moment and shear LDFs and equivalent widths were also derived using the AASHTO equations and the adequacy of the Iowa DOT five-foot requirement was evaluated. Finally, the axle weight limits per lane for different dual-lane load types were further calculated and recommended to complement the current Iowa Department of Transportation (DOT) policy and AASHTO code specifications.

Highway Performance and Time-Sensitive Industries, 1998

This report addresses delays to freight shippers. Although the focus is on just-in-time (JIT) businesses, the authors also note that non JIT businesses also suffer delays that impact their productivity. The table of contents lists the following headings: chapter 1 - introduction - a trial application: the Des Moines metropolitan area; structure of the report; chapter 2 - reliability at the forefront of freight transport demand - manufacturing and inventory; just-in-time operations in the U.S.; transportation consequences; summary; chapter 3 - JIT operations in Iowa - survey and sample; trucking activity and service; just-in-time truck transportation in Iowa; assessment of factors affecting truck transportation service; summary and conclusions; chapter 4 - travel time uncertainty induced by incidents - a probabilistic model for incident occurrences and durations; calculation of delay; trial application; conclusions; and chapter 5 - conclusions and recommendations - conclusions; recommendations.

Estimates of Total Fuel Consumption in Transporting Grain from Iowa to Major Grain-Importing Countries by Alternative Modes and Routes, 1985

This study measured fuel consumption in transporting grain from Iowa origins to Japan and Amsterdam by alternative routes and modes of transport and applied these data to construct equations for fuel consumption from Iowa origins to alternative final destinations. Some of the results are as follows: (1) The metered tractor-trailer truck averaged 186.6 gross ton-miles per gallon and 90.5 net ton-miles per gallon when loaded 50% of total miles. (2) The 1983 fuel consumption of seven trucks taken from company records was 82.4 net ton-miles per gallon at 67.5% loaded miles and 68.6 net ton-miles per gallon at 50% loaded miles. (3) Unit grain trains from Iowa to West Coast ports averaged 437.0 net ton-miles per gallon whereas unit grain trains from Iowa to New Orleans averaged 640.1 net ton-miles per gallon--a 46% advantage for the New Orleans trips. (4) Average barge fuel consumption on the Mississippi River from Iowa to New Orleans export grain elevators was 544.5 net ton-miles per gallon, with a 35% backhaul rate. (5) Ocean vessel net ton-miles per gallon varies widely by size of ship and backhaul percentage. With no backhaul, the average net ton-miles per gallon were as follows: for 30,000 dwt ship, 574.8 net ton-miles per gallon; for 50,000 dwt ship, 701.9; for 70,000 dwt ship, 835.1; and for 100,000 dwt ship, 1,043.4. (6) The most fuel efficient route and modal combination to transport grain from Iowa to Japan depends on the size of ocean vessel, the percentage of backhaul, and the origin of the grain. Alternative routes and modal combinations in shipping grain to Japan are ranked in descending order of fuel efficiencies.

The Iowa Grain Flow Survey: Where and How Iowa Grain Producers and Country Elevators Shipped Corn and Soybeans During September 1, 1999 - August 31, 2000, 2001

In September 1996, a grain flow survey consisting of two parts was completed and published. One part was a farm-to-market survey from a sample of Iowa grain producers, and the second was a survey of all Iowa country elevators. An updated survey for the crop year September 1, 1999 -August 31, 2000, was initiated in September 2000. The results of the two updated surveys are presented in this report. The purpose of the surveys is to estimate the amount of Iowa corn and soybeans that are shipped from each crop reporting district to each major market. Copies of the two questionnaires are presented in the appendices.

EVALUATION OF POTENTIAL TRANSLOAD FACILITY LOCATIONS IN THE UPPER PENINSULA (UP) OF MICHIGAN

Shippers want to improve their transportation efficiency and rail transportation has the potential to provide an economical alternative to trucking, but it also has potential drawbacks. The pressure to optimize transportation supply chain logistics has resulted in growing interest in multimodal alternatives, such as a combination of truck and rail transportation, but the comparison of multimodal and modal alternatives can be complicated. Shippers in Michigan’s Upper Peninsula (UP) face similar challenges. Adding to the challenge is the distance from major markets and the absence of available facilities for transloading activities. This study reviewed three potential locations for a transload facility (Nestoria, Ishpeming, and Amasa) where truck shipments could be transferred to rail and vice versa. These locations were evaluated on the basis of transportation costs for shippers when compared to the use of single mode transportation by truck to Wisconsin, Chicago, Minneapolis, and Sault Ste. Marie. In addition to shipping costs, the study also evaluated the potential impact of future carbon emission penalties on the shipping cost and the effects of changing fuel prices on shipping cost. The study used data obtained from TRANSEARCH database (2009) and found that although there were slight differences between percent savings for the three locations, any of them could provide potential benefits for movements to Chicago and Minneapolis, as long as final destination could be accessed by rail for delivery. Short haul movements of less than 200 miles (Wisconsin and Sault Ste. Marie) were not cost effective for multimodal transport. The study also found that for every dollar increase in fuel price, cost savings from multimodal option increased by three to five percent, but the inclusion of emission costs would only add one to two percent additional savings. Under a specific case study that addressed shipments by Northern Hardwoods, the most distant locations in Wisconsin would also provide cost savings, partially due to the possibility of using Michigan trucks with higher carrying capacity for the initial movement from the facility to transload location. In addition, Minneapolis movements were found to provide savings for Northern Hardwoods, even without final rail access.