Dessimetrização e enriquecimento enantiomérico de derivados do triciclo[5.2.1.0 2,6] decano através de enzimas e de indutores quirais. Preparação dos respectivos pseudopeptídeos restritos

Uma série de derivados quirais (e.e. > 99%) foram sintetizados a partir do meso- exo-(3R,5S)-3,5-dihidróximetilenotriciclo[5,2.1.02,6]decano com altos rendimentos, usando catálise enzimática (lipases) em reações de transesterificação. A resolução do respectivo diéster racêmico através da hidrólise catalisada com esterase (PLE) não forneceu o monoéster opticamente enriquecido; enquanto que a dessimetrização do anidrido usando indutores quirais (quinina e quinidina) resultou no monoéster opticamente enriquecido (e.e.≅ 60%). O respectivo amino-álcool protegido foi preparado. Alguns análogos inéditos de peptídeos restritos incorporados do triciclodecano foram sintetizados.

Síntese e enriquecimento enantiomérico via catálise enzimática do sistema 5-bromo-12-oxa-pentaciclo[6.2.16,9.12,7.12,10]dodeca-4-eno-3-endo-ol e derivados. RMN de 1H e 13C: correlação de parâmetros teóricos e experimentais

Partindo de ciclopentadieno, ciclohexadieno, p-benzoquinona e 2,5-dibromo-pbenzoquinona, os adutos 1, 5, 30 e 31 foram sintetizados. Os adutos 1, 5 e 30 foram utilizados como produtos de partida para a síntese de 13 (treze) novos compostos, em sua maioria com potenciais características para apresentarem atividade biológica inibidora de glicosidases e reguladora da liberação de Insulina no sangue. O aduto 31 é inédito na literatura até o momento. Cinco novas propostas de mecanismos são apresentadas. Os álcoois racêmicos 6 e 29 foram submetidos a reações de transesterificação catalisadas por lipase de Pseudomonas cepacia em diferentes preparações e seus enantiômeros separados com enantiosseletividade (E) maior que 100 em todos os casos. Este processo resultou, também, na obtenção dos respectivos acetatos 43 e 44 enantiomericamente puros e com excelentes rendimentos químicos. Os compostos 6, 29 e 34 depois de terem suas estruturas moleculares resolvidas através dos métodos espectroscópicos de rotina, tiveram suas estruturas moleculares calculadas pelo método ab initio e por Funcionais de Densidade. As geometrias otimizadas foram submetidas ao método GIAO para o cálculo dos tensores de blindagem magnética isotrópica. Estes cálculos mostraram-se eficazes na descrição dos deslocamentos químicos da maioria dos átomos, incluindo os dos anéis ciclopropanos presentes nas estruturas moleculares de cada composto. Algumas dificuldades foram encontradas para a descrição do sistema vinílico halogenado dos álcoois 6 e 29. Foram utilizadas moléculas modelo para verificar a extensão de tais dificuldades.

Estudo de reatividade e resolução enantiomérica do (+-)-10-exo-hidróxipentaciclo[6.2.1.1 3,6.0 2,7. 0 5.9] dodecan-4-ona

Neste trabalho, realizou-se a síntese do ceto-álcool pentaciclíco (±)-5, assim como o estudo de reatividade do grupo carbonila do mesmo frente a reações de oximação e redução. Realizou-se também a resolução enantiomérica do composto (±)-5 através de reação de transesterificação com acetato de vinila catalisada pela lipase da Candida rugosa. Altos excessos enantioméricos foram obtidos (>95%, RMN) tanto para o álcool (+)-5 quanto para o éster formado (-)-8. Sugere-se a existência de uma interconversão enantiomérica no composto (+)-5, devido a observação de mistura racêmica, quando o mesmo foi analisado por cromatografia gasosa em coluna quiral. Um mecanismo para tal interconversão, o qual envolve um rearranjo intramolecular, é proposto.

Alternativas de constituição da cadeia produtiva do biodisel na perspectiva dos centros de P&D

O modelo atual de desenvolvimento que está baseado na capacidade inesgotável do ambiente em fornecer energia e matéria, passa a ser cada dia menos viável quando se avalia a situação a ser deixada para as futuras gerações. A utilização de fontes não-renováveis de energia, como o petróleo e seus derivados, tem proporcionado elevados índices de desenvolvimento em algumas nações, mas também tem causado sérios impactos ao meio ambiente. Já na década de 70, as crises relacionadas à volatilidade nos preços do petróleo e a força dos movimentos ambientalistas trouxeram a necessidade de uma nova orientação para as questões energéticas em geral, estimulando a busca por fontes renováveis de energia e, entre elas, alternativas no setor agrícola para produção de biocombustíveis. Sendo assim, diversos biocombustíveis vêm sendo testados em todo o país, sendo que um deles, o biodiesel, vem tendo seu interesse retomado nos últimos anos. O biodiesel é um produto obtido da transesterificação de óleos e gorduras de origem vegetal, animal ou residual, que possui características muito semelhantes ao diesel do petróleo. O biodiesel pode ser utilizado puro ou misturado ao óleo diesel em diferentes proporções, sendo que seu maior atrativo é o fato de ser um combustível renovável e menos poluente. Entretanto, o fato de uma tecnologia ser científica e tecnicamente viável não garante que ela seja socialmente aceita pelo mercado e que se torne um produto comercial de sucesso, já que fatores sociais, políticos, econômicos e psicológicos interferem na capacidade dos agentes de avaliar as alternativas disponíveis e tomar decisões. Diante disso, este trabalho visa analisar as alternativas de constituição da cadeia produtiva do biodiesel no Brasil na perspectiva dos centros de P&D e, dessa forma, constatar junto a especialistas as questões fundamentais que têm sido consideradas na análise de viabilidade técnica, econômica e socioambiental da produção e comercialização deste produto. Para tanto, procurou-se identificar os principais elementos de viabilidade a serem abordados junto aos centros de P&D e, por meio de entrevistas em profundidade, delinear alternativas de configuração da cadeia produtiva do biodiesel no Brasil.

7,7-dimetoxi-1,4,5,6-tetraclorobiciclo[2.2.1]heptan-5-en-2-endo-ol : um versátil reagente na síntese de 1,3-aminoálcoois e de ciclopentanóides quirais altamente funcionalizados

Este trabalho relata a síntese de uma série de novos ligantes quirais (+) e (-)-syn-1,3-aminoálcoois derivados do norbornano. Através da reação de transesterificação enzimática com a lípase da Candida rugosa em acetato de vinila do álcool racêmico 7,7-dimetoxi-1,4,5,6-tetraclorobiciclo[2.2.1]heptan-5-en-2-ol, (±)-3, foram obtidos os álcoois quirais (+)-3 e (-)-3 (Esquema 1). Através da reação de redução e descloração destes álcoois com Na0/NH3/etanol foram obtidos os respectivos álcoois (+)-4 e (-)-4 (Esquema 2). Os álcoois quirais (+)-4 e (-)-4 foram utilizados como produtos de partida para a síntese dos 1,3-aminoálcoois quirais (+)-9 e (-)-9 em 5 etapas. Deste modo, a partir destes aminoálcoois (9), foi possível sintetizar 12 novos compostos (Esquema 2), todos inétidos na literatura. Os 1,3-aminoálcoois 10, 11, 13, 14 e 15 foram empregados como catalisadores quirais na adição enantiosseletiva de ZnEt2 ao benzaldeído. Excelentes rendimentos e excessos enantioméricos (até 91%) foram obtidos. A relação entre a configuração absoluta do 1-fenilpropanol com a configuração do carbono ligado ao grupo hidroxila dos ligantes foi estudada e, de acordo, com a enantiosseletividade observada foi sugerido um mecanismo para a reação Os produtos com esqueleto ciclopentila são importantes compostos com potencial atividade biológica, fazendo parte da estrutura de prostaglandinas, agentes antitumorais e inibidores da glicosidase. Portanto, nós decidimos usar o acetato clorado quiral 2 para preparar ciclopentanóides quirais altamente funcionalizados. Para isso, o acetato clorado quiral 2 foi submetido à oxidação usando uma quantidade catalítica de RuCl3 anidro na presença de NaIO4 obtendo-se a dicetona 16 (Esquema 3). A dicetona 16 foi clivada com H2O2 em meio alcalino fornecendo os diácidos 17a e 17b, que foram esterificados in situ com excesso de CH2N2 para fornecer uma mistura do hidroxi e acetoxi diéster 18 e 19, respectivamente. A redução da mistura 18 e 19 ou da mistura 17a e 17b com BH3.THF fornece a lactona 20 com excelentes rendimentos.

Síntese de ligantes quirais pentacíclicos 1,5 e bicíclicos 1,3 di substituídos e suas aplicações como indutores quirais na reação de adição de dietilzinco ao bensaldeído

Neste trabalho foi observado um rearranjodiotrópico do composto quiral (+)-1 o que levou na sua racemização. Verificou-se que esse processoé termicamente permitido pela simetria dos orbitais de fronteira HOMO-LUMO. Posteriormente, constatou-se que o rearranjo não era somente governado pela temperatura, mas também pelas condições reacionais, respeitada a simetria de orbitais. A partir da obtenção dos precursores quirais (−)-40 e (−)-41 através de reação de transesterificação de (±)-40 com acetato de vinila catalisada pela lípase da Cândida rugosa, realizou-se a síntese de uma série de compostos quirais bicíclicos 1,3 di-substituídos, dióis e aminoálcoois. Estes bicíclicos quirais foram testados como indutores quirais na reação de adição enantioseletiva de dietilzinco ao benzaldeído. Observou-se, no caso dos aminoálcoois, que a posição do estereocentro C-O tem uma importância fundamental no processo, determinando o grau de enantioseletividade da reação. Sintetizou-se o aminoálcool (+)-63 o qual foi utilizado na redução enantioseletiva de cetonas pró-quirais através da síntese, in situ, de sua oxazaborolidina.

Síntese enzimática de ésteres de açúcar: surfactantes e polímeros como novos materiais ambientalmente seguros

Sugar esters are substances which possess surfactant, antifungical and bactericidal actions and can be obtained through two renewable sources of raw materials: sugars and vegetable oils. Their excellent biodegradability, allied to lhe fact that they are non toxic, insipid, inodorous, biocompatible, no-ionic, digestible and because they can resist to adverse conditions of temperature, pH and salinity, explain lhe crescent use of these substances in several sections of lhe industry. The objective of this thesis was to synthesize and characterize surfactants and polymers containing sugar branched in their structures, through enzymatic transesterification of vinyl esters and sugars, using alkaline protease from Bacillus subtilis as catalyst, in organic medium (DMF).Three types of sugars were used: L-arabinose, D-glucose and sucrose and two types of vinyl esters: vinyl laurate and vinyl adipate. Aiming to reach high conversions from substrates to products for a possible future large scale industrial production, a serie of variables was optimized, through Design of Experiments (DOE), using Response Surface Methodology (RSM).The investigated variables were: (1) enzyme concentration; (2) molar reason of substrates; (3) water/solvent rale; (4) temperature and (5) time. We obtained six distinct sugar esters: 5-0-lauroyl L-arabinose, 6-0-lauroyl D-glucose, 1'-O-lauroyl sucrose, 5-0-vinyladipoyl L-arabinose, 6-0-vinyladipoyl D-glucose and 1 '-O-vinyladipoyl sucrose, being lhe last three polymerizable. The progress of lhe reaction was monitored by HPLC analysis, through lhe decrease of sugar concentration in comparison to lhe blank. Qualitative analysis by TLC confirmed lhe formation of lhe products. In lhe purification step, two methodologies were adopted: (1) chromatographic column and (2) extraction with hot acetone. The acylation position and lhe chemical structure were determined by 13C-RMN. The polymerization of lhe three vinyl sugar esters was possible, through chemical catalysis, using H2O2 and K2S2O8 as initiators, at 60°C, for 24 hours. IR spectra of lhe monomers and respective polymers were compared revealing lhe disappearance of lhe vinyl group in lhe polymer spectra. The molar weights of lhe polymers were determined by GPC and presented lhe following results: poly (5-0-vinyladipoyl L-arabinose): Mw = 7.2 X 104; PD = 2.48; poly (6-0-vinyladipoyl D-glucose): Mw = 2.7 X 103; PD = 1.75 and poly (1'-O-vinyladipoyl sucrose): Mw = 4.2 X 104; PD = 6.57. The six sugar esters were submitted to superficial tension tests for determination of the critical micelle concentrations (CMC), which varied from 122 to 167 ppm. Finally, a study of applicability of these sugar esters, as lubricants for completion fluids of petroleum wells was' accomplished through comparative analysis of lhe efficiency of these sugar esters, in relation to three commercial lubricants. The products synthesized in this thesis presented equivalent or superior action to lhe tested commercial products

Síntese, caracterização e aplicação de LaSBA-15 e como catalisador para obtenção de biodiesel de soja via rota etílica

Biodiesel is an alternative fuel, renewable, biodegradable and nontoxic. The transesterification of vegetable oils or animal fat with alcohol is most common form of production of this fuel. The procedure for production of biodiesel occurs most commonly through the transesterification reaction in which catalysts are used to accelerate and increase their income and may be basic, acid or enzyme. The use of homogeneous catalysis requires specific conditions and purification steps of the reaction products (alkyl ester and glycerol) and removal of the catalyst at the end of the reaction. As an alternative to improve the yield of the transesterification reaction, minimize the cost of production is that many studies are being conducted with the application of heterogeneous catalysis. The use of nano-structured materials as catalysts in the production of biodiesel is a biofuel alternative for a similar to mineral diesel. Although slower, can esterify transesterified triglycerides and free fatty acids and suffer little influence of water, which may be present in the raw material. This study aimed at the synthesis, characterization and application of nano-structured materials as catalysts in the transesterification reaction of soybean oil to produce biodiesel by ethylic route. The type material containing SBA-15 mesoporous lanthanum embedded within rightly Si / La = 50 was used catalyst. Solid samples were characterized by X-ray diffraction, thermogravimetric analysis, infrared spectroscopy, nitrogen adsorption and desorption. For the transesterification process, we used a molar ratio of 20:1 alcohol and oil with 0.250 g of catalyst at 60°C and times of 6 hours of reaction. It was determined the content of ethyl esters by H-NMR analysis and gas chromatography. It was found that the variable of conversion obtained was 80%, showing a good catalytic activity LaSBA-15 in the transesterification of vegetable oils via ethylic route

Conversão térmica e termocatalítica à baixa temperatura do óleo de girassol para obtenção de bio-óleo

The use of biofuels remotes to the eighteenth century, when Rudolf Diesel made the first trials using peanut oil as fuel in a compression ignition engine. Based on these trials, there was the need for some chemical change to vegetable oil. Among these chemical transformations, we can mention the cracking and transesterification. This work aims at conducting a study using the thermocatalytic and thermal cracking of sunflower oil, using the Al-MCM-41 catalyst. The material type mesoporous Al-MCM-41 was synthesized and characterized by Hydrothermical methods of X-ray diffraction, scanning electron microscopy, nitrogen adsorption, absorption spectroscopy in the infrared and thermal gravimetric analysis (TG / DTG).The study was conducted on the thermogravimetric behavior of sunflower oil on the mesoporous catalyst cited. Activation energy, conversion, and oil degradation as a function of temperature were estimated based on the integral curves of thermogravimetric analysis and the kinetic method of Vyazovkin. The mesoporous material Al-MCM-41 showed one-dimensional hexagonal formation. The study of the kinetic behavior of sunflower oil with the catalyst showed a lower activation energy against the activation energy of pure sunflower oil. Two liquid fractions of sunflower oil were obtained, both in thermal and thermocatalytic pyrolisis. The first fraction obtained was called bio-oil and the second fraction obtained was called acid fraction. The acid fraction collected, in thermal and thermocatalytic pyrolisis, showed very high level of acidity, which is why it was called acid fraction. The first fraction was collected bio-called because it presented results in the range similar to petroleum diesel

Obtenção de álcool alílico (PROP-2-EN-1-OL) a partir da glicerina derivada do biodiesel de óleo de mamona

In this work, biodiesel was produced from castor oil that was a byproduct glycerin. The molar ratio between oil and alcohol, as well as the use of (KOH) catalyst to provide the chemical reaction is based on literature. The best results were obtained using 1 mol of castor oil (260g) to 3 moles of methyl alcohol (138g), using 1.0% KOH as catalyst at a temperature of 260 ° C and shaken at 120 rpm. The oil used was commercially available, the process involves the reaction of transesterification of a vegetable oil with methyl alcohol. The product of this reaction is an ester, biodiesel being the main product and the glycerin by-product which has undergone treatment for use as raw material for the production of allyl alcohol. The great advantage of the use of glycerin to obtain allyl alcohol is that its use eliminates the large amount of waste of the biodiesel and various forms of insult to the environment. The reactions for the formation of allyl alcohol was conducted from formic acid and glycerin in a ratio 1/1, at a temperature of 260oC in a heater blanket, being sprayed by a spiral condenser for a period of 2 hours and the product obtained contains mostly the allylic alcohol .. The monitoring of reactions was performed by UV-Visible Spectrophotometer: FTIR Fourier transform, the analysis showed that these changes occur spectrometer indicating the formation of the product allylic alcohol (prop-2-en-1-ol) in the presence of water, This alcohol was appointed Alcohol GL. The absorption bands confirms that the reaction was observed in (υ C = C) 1470 -1600 cm -1 and (υ CO), 3610-3670 attributed to C = C groups and OH respectively. The thermal analysis was carried out in a thermogravimetric analyzer SDT Q600, where the mass and temperature are displayed against time, that allows checking the approximate rate of heating. The innovative methodology developed in the laboratory (LABTAM, UFRN), was able to treat the glycerine produced by transesterification of castor oil and used as raw material for production of allyl alcohol, with a yield of 80%, of alcohol, the same is of great importance in the manufacture of polymers, pharmaceuticals, organic compounds, herbicides, pesticides and other chemicals

Proposta de localização de uma unidade de tratamento de óleo e gordura residual de fritura na cidade do Natal/RN para produção de biodiesel

This work addresses biodiesel by transesterification from the use of waste frying oil as a possible technological alternative for both reducing greenhouse gas emissions and by presenting themselves as an environmental call to designate a rational use of oil when no longer played in the environment to become renewable energy. It has proposed location of a residual oil and fat treatment plant to produce biodiesel, using models of Location and Routing for the improvement of routes. To achieve the goal, questionnaires were administered in establishments that use oil or vegetable fat in their productive activities in order to quantify the residue, to analyze actions and environmental perception of people who work directly with the residue on the destination you are being given to oil and fat used. It has indicated using of two single setup location, the method of Center of Gravity and the model of Ardalan, a geographical point that minimizes the costs of transporting waste to the treatment plant. Actions have been proposed for the improvement of collection routes this residue using the Routing Method of Scanning, as an illustration. The results demonstrated the lack of knowledge of the people who deal directly with large amounts of waste, on the environmental impacts caused by their incorrect disposal. The models used were uniform since point out to neighborhoods in similar regions. The neighborhoods of Lagoa Nova / Morro Branco (Ardalan) and Nova Descoberta (Center of Gravity) as ideal for the installation of treatment plant. However, it is suggested to be tested other models that take into account new variables than those used (supply of waste and the distance between points). The routing through the method of scanning has shown that it is possible, in a simple way to optimize routes in order to reduce distances and therefore the logistics costs in the collection of such waste. Introducing a route as a test to gather the twenty largest oil suppliers used in sample frying, using as a main factor time 8 hour of working shift every day

Análise da lubricidade do biodiesel brasileiro de ésteres etílicos de soja e girassol

Fuel is a material used to produce heat or power by burning, and lubricity is the capacity for reducing friction. The aim of this work is evaluate the lubricity of eight fossil and renewable fuels used in Diesel engines, by means of a HFRR tester, following the ASTM D 6079-04 Standard. In this conception, a sphere of AISI 52100 steel (diameter of 6,000,05 mm, Ra 0,050,005 μm, E = 210 GPa, HRC 624, HV0,2 63147) is submitted to a reciprocating motion under a normal load of 2 N and 50 Hz frequency to promote a wear track length of 1.10.1mm in a plan disc of AISI 52100 steel (HV0,05 18410, Ra 0,020,005 μm). The testing extent time was 75 minutes, 225,000 cycles. Each one test was repeated six times to furnish the results, by means of intrinsic signatures from the signals of the lubricant film percentage, friction coefficient, contact heating, Sound Pressure Level, SPL [dB]. These signal signatures were obtained by two thermocouples and a portable decibelmeter coupled to a data acquisition system and to the HFRR system. The wettability of droplet of the diesel fuel in thermal equilibrium on a horizontal surface of a virgin plan disc of 52100 steel, Ra 0,02  0,005 μm, were measured by its contact angle of 7,0  3,5o, while the results obtained for the biodiesel B5, B20 and B100 blends originated by the ethylic transesterification of soybean oil were, respectively, 7,5  3,5o, 13,5  3,5o e 19,0  1,0o; for the distilled water, 78,0  6,0o; the biodiesel B5, B20 and B100 blends originated by the ethylic transesterification of sunflower oil were, respectively, 7,0  4,0o, 8,5  4,5o e 19,5  2,5o. Different thickness of lubricant film were formed and measured by their percentage by means of the contact resistance technique, suggesting several regimes, since the boundary until the hydrodynamic lubrication. All oils analyzed in this study promoted the ball wear scars with diameters smaller than 400 μm. The lowest values were observed in the scar balls lubricated by mixtures B100, B20 and B5 of sunflower and B20 and B5 of soybean oils (WSD < 215 μm)

Utilização do éster de soja como biolubrificante

The lubricants found in the market are of mineral or synthetic origin and harm to humans and the environment, mainly due to their improper discard. Therefore industries are seeking to develop products that cause less environmental impact, so to decrease mainly, operator aggression the Cutting Fluids became an emulsion of oil / water or water / oil. However, the emulsion was not considered the most suitable solution for environmental question, therefore the search for biodegradable lubricants and which no are toxic continues and so vegetable oils are seen, again, as a basis for the production of lubricants. The biggest problem with these oils is their oxidative instability that is intensified when working at high temperatures. The process transesterification decreases the oxidation, however changes some physical and chemical properties. Therefore soybean oil after the transesterification process was subjected to tests of density, dynamic viscosity, kinematic viscosity which is calculated from two parameters mentioned, flash point and acidity. Besides the physico-chemical test the soybean oil was subjected to a dynamic test in a tribometer adapted from a table vise, whose induced wear was the adhesive and ultimately was used as cutting fluid in a process of turning in two different materials, steel 1045 and cast iron. This latter test presented results below the mineral cutting fluid which it was compared in all tests, already in other experiments the result was satisfactory and other experiments not, so that chemical additives can be added to the oil analyzed to try equate all parameters and so formulate a biolubrificante not toxic to apply in machining processes of metalworking industry

Produção de biodiesel a partir de óleo de coco (Cocos nucifera L

The production of biodiesel has become an important and attractive process for the production of alternative fuels. This work presents a study of the biodiesel production from coconut oil (Cocos nucifera L.), by two routes: direct transesterification using NaOH as catalyst and esterification (with H2SO4) followed by basic transesterification. The reactor was built in pirex with 1L of capacity and was equipped with a jacket coupled with a thermostatic bath to temperature control, a mecanical stirring is also present in the reactor. The analysis of oil composition was carried out by gas chromatography and esters compounds were identified. The parameters of molar ratio oil/alcohol, reaction time and temperature were studied and their influence on the conversion products was evaluated using experimental planning (23). The molar ratio was the most significant variable by the statistical planning analysis. Conversions up to 85.3% where achived in the esterification/transesterification, with molar ratio 1:6 at 60ºC and 90 minutes of reaction. For the direct transesterification, route conversions up 87.4% eas obtained using 1:6.5 molar ratio at 80ºC and 60 minutes of reaction. The Coconut oil was characterized by their physic chemical properties and key constituents of the oil. The lauric acid was the main constituint and the oil showed high acidity. The biodiesel produced was characterized by its main physicochemical properties, indicating satisfactory results when compared to standard values of National Petroleum Agency. The work was supplemented with a preliminary assessment of the reaction kinetic

Avaliação da eficiência de catalisadores comerciais na obtenção de biodiesel de algodão (Gossipium hisutum L.)

The increasing demand for energy and the environment consequences derived from the use of fossil energy, beyond the future scarcity of the oil that currently is the main power plant of the world, it stimulated the research around the production of biodiesel. In this work the synthesis of biodiesel of cotton in the methyl route was carried through, for had been in such a way used catalyst commercial homogeneous, Na-Methylat and the K-Methylat, aiming to the evaluation of the efficiency of them. An experimental planning 23 was elaborated aiming to evaluate the influence of the variable (molar reason oil/alcohol, % of catalyst and temperature) in the process as well as indicating the excellent point of operation in each case. The biodiesel was analyzed by gaseous chromatography, indicating a conversion of 96,79% when used Na-Methylat® as catalytic, and 95,65% when the K-Methylat® was used. Optimum result found with regard to the conversion was obtained at the following conditions: molar reason oil/alcohol (1:8), temperature of 40°C and 1% of catalyst Na-Methylat, reaching a 96,79% conversion, being, therefore, above of the established for the European norm (96.5%). The analysis of regression showed that the only significant effect for a confidence level of 95%, was of the changeable temperature. The variance analysis evidenced that the considered model is fitted quite to the experimental response, being statistically significant; however it does not serve inside for make forecasts of the intervals established for each variable. The best samples were analyzed by infra-red (IR) that identified the strong bands of axial deformation C=O of methylic ester, characterized through analyses physicochemical that had indicated conformity with the norms of the ANP, that with the thermal and rheological analyses had together evidenced that biodiesel can be used as combustible alternative in substitution to diesel