Microfacies and sequence stratigraphy of the Amapa Formation, Late Paleocene to Early Eocene, Foz do Amazonas Basin, Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

High temperature X-ray diffraction study of the U4O9 formation on UO2 sintered plates

The surface oxidation of UO2 sintered plates at 170-275 ° C was studied in situ by high temperature X-ray diffractometry. At very low oxygen concentration, UO2 is oxidized to U4O9, while at 300°C and argon-20 vol% oxygen it is oxidized up to U3O7. X-ray diffraction profiles of the UO2, U4O9 and U3O7 phases were well characterized during the transformations. The activation energy for the transformation of UO2 to U4O9, obtained from X-ray diffraction data, was found to be 117 ± 9 kJ/mol and 90 ± 14 kJ/mol for the β-(311) and α-(200) reflections, respectively. © 1991.

Facies analysis of the Codó formation (Late Aptian) in the Grajaú area, Southern São Luís-Grajaú Basin

Facies descriptions of the Codó Formation in the Grajaú area are provided for the first time, and its sedimentary characteristics compared to those from the Codó area to allow paleoenvironmental reconstructions. Deposits in the Grajaú area include evaporites, limestones and argillites bearing features indicative of a shallow, low energy, subaqueous, saline environment exposed to meteoric and/or capillary conditions. Floodingevaporative concentration-desiccation cycles suggest a saline pan complex surrounded by extensive evaporitic mudflats. The location of the system, whether coastal or inland, is a matter open for debate. However, the later hypothesis is favored considering: 1. Sr isotopic data, with values higher than those expected for Late Aptian marine waters; 2. calcitic composition of limestones (instead of dolomitic and/or magnesitic as expected in coastal settings); and 3. presence of continental ostracods and lack of marine fauna. This interpretation is consistent with that proposed for UpperAptian deposits of the Codó area, but the depositional system there was one dominated by more stable, well-stratified, anoxic waters and evaporite precipitation in central lacustrine areas, while in the Grajaú area the salt pan was more oxygenated and ephemeral, with salt precipitation mainly in marginal areas or along surrounding mudflats.

Petrography of gypsum-bearing facies of the Codó Formation (Late Aptian), Northern Brazil

Neste trabalho, é apresentado um estudo original e detalhado enfocando os aspectos petrográficos dos evaporitos de depósitos aptianos superiores expostos no sul e leste da Bacia de São Luís-Grajaú. O objetivo é o estabelecimento de critérios que permitam distinguir entre evaporitos primários e secundários, além da reconstrução de sua evolução pós-deposicional. Sete fases de evaporitos foram reconhecidas: 1. gipsita em chevron; 2. gipsita ou anidrita nodular a lenticular; 3. gipsita fibrosa a acicular; 4. gipsita em mosaico; 5. gipsita brechada a gipsarenito; 6. anidrita ou gipsita pseudo-nodular; e 7. gipsita em rosetas. As três primeiras fases apresentam características petrográficas condizentes com origem primária. Agipsita fibrosa a acicular e a gipsita em mosaico foramformadas por substituições de gipsita primária, com origem provável nos estágios iniciais da diagenêse, portanto ainda sob influência do ambiente deposicional. Estas morfologias de gipsita estão relacionadas com a fácies de evaporito laminado, tendo sido formadas por substituição, porém sem afetar a estruturação primária. A gipsita ou anidrita pseudo-nodular originou-se pela mobilização de soluções sulfatadas durante ou após soterramento, provavelmente associada à halocinese. A gipsita em rosetas, que intercepta todas as outras variedades de gipsita, representa o ultimo estágio de formação de evaporitos na área de estudo, tendo resultado de soluções intraestratais ou de águas superficiais durante intemperismo.

Fluazuron-induced morphological changes in Rhipicephalus sanguineus Latreille, 1806 (Acari: Ixodidae) nymphs: An ultra-structural evaluation of the cuticle formation and digestive processes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Diatom stratigraphy of the lower Pliocene part of the Sisquoc Formation, Harris Grade section, California

Lower Pliocene diatoms were studied from the Sisquoc Formation and lowermost Foxen Mudstone, exposed along Hams Grade north of Lompoc, California, to refine the diatom biostratigraphy of post-Monterey Formation sediments in California. Sixty-seven diatom taxa were identified in the 25 samples examined from the 790-m thick (2950-ft) section. The diatoms are assignable to the uppermost Nitzschia reinholdii Zone and Thalassiosira oestrupii Zone of Damn (1981), and five tentative subzones for local correlation are proposed. Regional correlations and taxon occurrence are discussed, and the base of the Nitzschia reinholdii Zone is redefined as at the last occurrence of Thalassionema schraderi.

Microfacies and sequence stratigraphy of the Amapa Formation, Late Paleocene to Early Eocene, Foz do Amazonas Basin, Brazil

On the basis of thin-section studies of cuttings and a core from two wells in the Amapa Formation of the Foz do Amazonas Basin, five main microfacies have been recognized within three stratigraphic sequences deposited during the Late Paleocene to Early Eocene. The facies are: 1) Ranikothalia grainstone to packstone facies; 2) ooidal grainstone to packstone facies; 3) larger foraminiferal and red algal grainstone to packstone facies; 4) Amphistegina and Helicostegina packstone facies; and 5) green algal and small benthic foraminiferal grainstone to packstone facies, divisible locally into a green algal and the miliolid foraminiferal subfacies and a green algal and small rotaliine foraminiferal subfacies. The lowermost sequence (Si) was deposited in the Late Paleocene-Early Eocene (biozone LF1, equivalent to P3-P6?) and includes rudaceous grainstones and packstones with large specimens of Ranikothalia bermudezi representative of the mid- and inner ramp. The intermediate and uppermost sequences (S2 and S3) display well-developed lowstand deposits formed at the end of the Late Paleocene (upper biozone LF1) and beginning of the Early Eocene (biozone LF2) on the inner ramp (larger foraminiferal and red algal grainstone to packstone facies), in lagoons (green algal and small benthic foraminiferal facies) and as shoals (ooidal facies) or banks (Amphistegina and Helicostegina facies). Depth and oceanic influence were the main controls on the distribution of these microfacies. Stratal stacking patterns evident within these sequences may well have been related to sea level changes postulated for the Late Paleocene and Early Eocene. During this time, the Amapa Formation was dominated by cyclic sedimentation on a gently sloping ramp. Environmental and ecological stress brought about by sea level change at the end of the biozone LF1 led to the extinction of the larger foraminifera (Ranikothalia bermudezi). (c) 2009 Elsevier B.V. All rights reserved.

Thermal analysis of the chip formation in austenitic stainless steel

The most important property of austenitic stainless steels is corrosion resistance. In these steels, the transition between paramagnetic and ferromagnetic conditions occurs at low temperatures. Therefore, the use of austenitic stainless steels in conditions in which ferromagnetism absence is important can be considered. On the other hand, the formation of strain-induced martensite is detected when austenitic stainless steels are deformed as well as machined. The strain-induced martensite formed especially in the machining process is not uniform through the chip and its formation can also be related to the Md temperature. Therefore, both the temperature distribution and the gradient during the cutting and chip formation are important to identify regions in which martensite formation is propitiated. The main objective here is evaluate the strain-induced martensite formation throughout machining by observing microstructural features and comparing these to thermal results obtained through finite element method analysis. Results show that thermal analysis can give support to the martensite identified in the microstructural analysis.

Reservoir characterization of the Cardium Formation in the Ferrier Oilfield, west-central Alberta, Canada.

This thesis has the main aim of defining the lithostratigraphy, depositional architecture, post-depositional modifications and reservoir characteristics of the Cardium Formation in the Ferrier Oilfield, and how these characteristics can have great impact over production rates, GOR and produced fluid discrimination. In the Ferrier area, the Cardium Formation is composed by a NE prograding clastic sequence made up of offshore to shoreface deposits sealed by marine shales. The main reservoir is composed by sandstones and conglomerates interpreted to have deposited in a shoreface depositional environment. Lithofacies and net reservoir thickness mapping led to more detailed understanding of the 3D reservoir architecture, and cross-sections shed light on the Cardium depositional architecture and post-deposition sediment erosion in the Ferrier area. Detailed core logging, thin section, SEM and CL analyses were used to study the mineralogy, texture and pore characterization of the Cardium reservoir, and three main compartments have been identified based on production data and reservoir characteristics. Finally, two situations showing odd production behaviour of the Cardium were resolved. This shed light on the effect of structural features and reservoir quality and thickness over hydrocarbon migration pathways. The Ferrier example offers a unique case of fluid discrimination in clastic reservoirs due both to depositional and post-depositional factors, and could be used as analogue for similar situations in the Western Canadian Sedimentary Basin.

Geochemical Modeling and Analysis of the Frac Water Used in the Hydraulic Fracturing of the Marcellus Formation, Pennsylvania

The hydraulic fracturing of the Marcellus Formation creates a byproduct known as frac water. Five frac water samples were collected in Bradford County, PA. Inorganic chemical analysis, field parameters analysis, alkalinity titrations, total dissolved solids(TDS), total suspended solids (TSS), biological oxygen demand (BOD), and chemical oxygen demand (COD) were conducted on each sample to characterize frac water. A database of frac water chemistry results from across the state of Pennsylvania from multiple sources was compiled in order to provide the public and research communitywith an accurate characterization of frac water. Four geochemical models were created to model the reactions between frac water and the Marcellus Formation, Purcell Limestone, and the oil field brines presumed present in the formations. The average concentrations of chloride and TDS in the five frac water samples were 1.1 �± 0.5 x 105 mg/L (5.5X average seawater) and 140,000 mg/L (4X average seawater). BOD values for frac water immediately upon flow back were over 10X greater than the BOD of typical wastewater, but decreased into the range of typical wastewater after a short period of time. The COD of frac water decreases dramatically with an increase in elapsed time from flow back, but remain considerably higher than typicalwastewater. Different alkalinity calculation methods produced a range of alkalinity values for frac water: this result is most likely due to high concentrations of aliphatic acid anions present in the samples. Laboratory analyses indicate that the frac watercomposition is quite variable depending on the companies from which the water was collected, the geology of the local area, and number of fracturing jobs in which the frac water was used, but will require more treatment than typical wastewater regardless of theprecise composition of each sample. The geochemical models created suggest that the presence of organic complexes in an oil field brine and Marcellus Formation aid in the dissolution of ions such as bariumand strontium into the solution. Although equilibration reactions between the Marcellus Formation and the slickwater account for some of the final frac water composition, the predominant control of frac water composition appears to be the ratio of the mixture between the oil field brine and slickwater. The high concentration of barium in the frac water is likely due to the abundance of barite nodules in the Purcell Limestone, and the lack of sulfate in the frac water samples is due to the reducing, anoxic conditions in the earth's subsurface that allow for the degassing of H2S(g).

Geophysical and geological analysis of the Collingwood Member of the Trenton Formation

The Collingwood Member is a mid to late Ordovician self-sourced reservoir deposited across the northern Michigan Basin and parts of Ontario, Canada. Although it had been previously studied in Canada, there has been relatively little data available from the Michigan subsurface. Recent commercial interest in the Collingwood has resulted in the drilling and production of several wells in the state of Michigan. An analysis of core samples, measured laboratory data, and petrophysical logs has yielded both a quantitative and qualitative understanding of the formation in the Michigan Basin. The Collingwood is a low permeability and low porosity carbonate package that is very high in organic content. It is composed primarily of a uniformly fine grained carbonate matrix with lesser amounts of kerogen, silica, and clays. The kerogen content of the Collingwood is finely dispersed in the clay and carbonate mineral phases. Geochemical and production data show that both oil and gas phases are present based on regional thermal maturity. The deposit is richest in the north-central part of the basin with thickest deposition and highest organic content. The Collingwood is a fairly thin deposit and vertical fractures may very easily extend into the surrounding formations. Completion and treatment techniques should be designed around these parameters to enhance production.

The Calcite Veins of the Livingston Formation

An interesting group of calcite veins occur near Livingston Montana in a zone about eight miles wide and forty miles long in the edge of the Plains region of Montana in front of the Main ranges. The zone extends from the Boulder River south of Big Timber, through Springdale and Hunters Hot Springs, to Potter's Basin just north of Wilsall in Park County. The group of veins is particularly interesting because they cut relatively flat lying strata, suggest a structural relation­ship to one another, and they are nearly pure calcite. The present investigation was to determine the position of the calcite veins by plotting them on a base map of the district. In addition, it was planned to determine the mineralogy end origin of the veins and their structural and stratigraphical relationship to the rocks of the Livingston formation which they cut.

Siliceous Sponge Spicules of the Quadrant Formation from Montana.

A sponge spicule is a siliceous or calcareous individual or group of rays which form a framework for the sponge. Sponge spicules are very delicate and easily broken. The methods used in obtaining micro-fossils vary considerably with the type of material from which they are to be recovered and the frailness of the fossil obtained.