Grid-connected roof solar plants in educational institutions for testing and electricity generation: a case in Spain.

The use of photovoltaic experimental plants in engineering educational buildings contributes to an increase in acceptance of this technology by future engineers. There are some photovoltaic (PV) systems in educational buildings in Spain, but they are usually limited to buildings in relation to electrical technologies or research areas. They are not common in other educational or official buildings. This paper presents the project of a grid-connected solar plant with two main objectives. First, different PV module technologies will be compared. Second, an emphasis on agronomical areas in educational settings will be reviewed in an attempt to facilitate student engagement in the use of the power plant. The system is grid-connected in order to pay-back the investment in the plant. In fact the electricity generated by the plant will be used by the installations of the building, as it is the closest consumer. This work intends to approximate photovoltaic technology to university degrees not directly related with it and at the same time research in comparison of systems with different technologies. This is a good example of an solar plant for both optimum production and educational purposes.

Comparing the effectiveness of equivalence partitioning, branch testing and code reading by stepwise abstraction applied by subjects

Some verification and validation techniques have been evaluated both theoretically and empirically. Most empirical studies have been conducted without subjects, passing over any effect testers have when they apply the techniques. We have run an experiment with students to evaluate the effectiveness of three verification and validation techniques (equivalence partitioning, branch testing and code reading by stepwise abstraction). We have studied how well able the techniques are to reveal defects in three programs. We have replicated the experiment eight times at different sites. Our results show that equivalence partitioning and branch testing are equally effective and better than code reading by stepwise abstraction. The effectiveness of code reading by stepwise abstraction varies significantly from program to program. Finally, we have identified project contextual variables that should be considered when applying any verification and validation technique or to choose one particular technique.

A flowchart-to-source-code conversion program for GPSS/360 /

Originally presented as the author's thesis (M.S.), University of Illinois at Urbana-Champaign.

The coder : a program module for code generation in high-level language compilers /

Originally presented as the author's thesis (M.S.), University of Illinois at Urbana-Champaign.

Position Paper: Improving Source Code Reuse through Documentation Standardization

In the context of Software Reuse providing techniques to support source code retrieval has been widely experimented. However, much effort is required in order to find how to match classical Information Retrieval and source code characteristics and implicit information. Introducing linguistic theories in the software development process, in terms of documentation standardization may produce significant benefits when applying Information Retrieval techniques. The goal of our research is to provide a tool to improve source code search and retrieval In order to achieve this goal we apply some linguistic rules to the development process.

Review and Outlooks of the Means for Visualization of Syntax Semantics and Source Code. Procedural and Object Oriented Paradigm – Differences

In the article, we have reviewed the means for visualization of syntax, semantics and source code for programming languages which support procedural and/or object-oriented paradigm. It is examined how the structure of the source code of the structural and object-oriented programming styles has influenced different approaches for their teaching. We maintain a thesis valid for the object-oriented programming paradigm, which claims that the activities for design and programming of classes are done by the same specialist, and the training of this specialist should include design as well as programming skills and knowledge for modeling of abstract data structures. We put the question how a high level of abstraction in the object-oriented paradigm should be presented in simple model in the design stage, so the complexity in the programming stage stay low and be easily learnable. We give answer to this question, by building models using the UML notation, as we take a concrete example from the teaching practice including programming techniques for inheritance and polymorphism.

A stereo-image analysis JAVA software with links to executable and source code

Scientists planning to use underwater stereoscopic image technologies are often faced with numerous problems during the methodological implementations: commercial equipment is too expensive; the setup or calibration is too complex; or the imaging processing (i.e. measuring objects in the stereo-images) is too complicated to be performed without a time-consuming phase of training and evaluation. The present paper addresses some of these problems and describes a workflow for stereoscopic measurements for marine biologists. It also provides instructions on how to assemble an underwater stereo-photographic system with two digital consumer cameras and gives step-by-step guidelines for setting up the hardware. The second part details a software procedure to correct stereo-image pairs for lens distortions, which is especially important when using cameras with non-calibrated optical units. The final part presents a guide to the process of measuring the lengths (or distances) of objects in stereoscopic image pairs. To reveal the applicability and the restrictions of the described systems and to test the effects of different types of camera (a compact camera and an SLR type), experiments were performed to determine the precision and accuracy of two generic stereo-imaging units: a diver-operated system based on two Olympus Mju 1030SW compact cameras and a cable-connected observatory system based on two Canon 1100D SLR cameras. In the simplest setup without any correction for lens distortion, the low-budget Olympus Mju 1030SW system achieved mean accuracy errors (percentage deviation of a measurement from the object's real size) between 10.2 and -7.6% (overall mean value: -0.6%), depending on the size, orientation and distance of the measured object from the camera. With the single lens reflex (SLR) system, very similar values between 10.1% and -3.4% (overall mean value: -1.2%) were observed. Correction of the lens distortion significantly improved the mean accuracy errors of either system. Even more, system precision (spread of the accuracy) improved significantly in both systems. Neither the use of a wide-angle converter nor multiple reassembly of the system had a significant negative effect on the results. The study shows that underwater stereophotography, independent of the system, has a high potential for robust and non-destructive in situ sampling and can be used without prior specialist training.

Profile detection through source code static analysis

The present article reflects the progress of an ongoing master’s dissertation on language engineering. The main goal of the work here described, is to infer a programmer’s profile through the analysis of his source code. After such analysis the programmer shall be placed on a scale that characterizes him on his language abilities. There are several potential applications for such profiling, namely, the evaluation of a programmer’s skills and proficiency on a given language or the continuous evaluation of a student’s progress on a programming course. Throughout the course of this project and as a proof of concept, a tool that allows the automatic profiling of a Java programmer is under development. This tool is also introduced in the paper and its preliminary outcomes are discussed.

A Graphical Pattern Editor for Java Frameworks

Ohjelmistojen uudelleenkäyttö on hyvin tärkeä käsite ohjelmistotekniikan alueella.Ohjelmistojen uudelleenkäyttötekniikat parantavat ohjelmistokehitysprosessin laatua. Yleisiä ratkaisuja sekä ohjelmiston suunnittelun että arkkitehtuurin uudelleenkäyttöön ovat olio-ohjelmointi ja sovelluskehykset. Tähän asti ei ole ollut olemassa yleisiä tapoja sovelluskehysten erikoistamiseen. Monet nykyääntunnetuista sovelluskehyksistä ovat hyvin suuria ja mutkikkaita. Tällaisten sovelluskehyksien käyttö on monimutkaista myös kokeneille ohjelmoijille. Hyvin dokumentoidut uudelleenkäytettävät sovelluskehyksen rajapinnat parantavat kehyksen käytettävyyttä ja tehostavat myös erikoistamisprosessiakin sovelluskehyksen käyttäjille. Sovelluskehyseditori (framework editor, JavaFrames) on prototyyppityökalu, jota voidaan käyttää yksinkertaistamaan sovelluskehyksen käyttöä. Perusajatus JavaFrames lähestymistavassa ovat erikoistamismallit, joita käytetään kuvamaan sovelluskehyksen uudelleenkäytettäviä rajapintoja. Näihin malleihin perustuen JavaFrames tarjoaa automaattisen lähdekoodi generaattorin, dokumentoinninja arkkitehtuurisääntöjen tarkistuksen. Tämä opinnäyte koskee graafisen mallieditorin kehittämistä JavaFrames ympäristöön. Työssä on laadittu työkalu,jonka avulla voidaan esittää graafisesti erikoistamismalli. Editori sallii uusien mallien luomisen, vanhojen käyttämättä olevien poistamisen, kuten myös yhteyksien lisäämisen mallien välille. Tällainen graafinen tuki JavaFrames ympäristöönvoi huomattavasti yksinkertaistaa sen käyttöä ja tehdä sovellusten kehittämisprosessista joustavamman.

Integrating open source codes for solid modeling and automatic mesh generation in FEM applications

The applications of the Finite Element Method (FEM) for three-dimensional domains are already well documented in the framework of Computational Electromagnetics. However, despite the power and reliability of this technique for solving partial differential equations, there are only a few examples of open source codes available and dedicated to the solid modeling and automatic constrained tetrahedralization, which are the most time consuming steps in a typical three-dimensional FEM simulation. Besides, these open source codes are usually developed separately by distinct software teams, and even under conflicting specifications. In this paper, we describe an experiment of open source code integration for solid modeling and automatic mesh generation. The integration strategy and techniques are discussed, and examples and performance results are given, specially for complicated and irregular volumes which are not simply connected. © 2011 IEEE.

ScriptLattes: an open-source knowledge extraction system from the Lattes platform

The Lattes platform is the major scientific information system maintained by the National Council for Scientific and Technological Development (CNPq). This platform allows to manage the curricular information of researchers and institutions working in Brazil based on the so called Lattes Curriculum. However, the public information is individually available for each researcher, not providing the automatic creation of reports of several scientific productions for research groups. It is thus difficult to extract and to summarize useful knowledge for medium to large size groups of researchers. This paper describes the design, implementation and experiences with scriptLattes: an open-source system to create academic reports of groups based on curricula of the Lattes Database. The scriptLattes system is composed by the following modules: (a) data selection, (b) data preprocessing, (c) redundancy treatment, (d) collaboration graph generation among group members, (e) research map generation based on geographical information, and (f) automatic report creation of bibliographical, technical and artistic production, and academic supervisions. The system has been extensively tested for a large variety of research groups of Brazilian institutions, and the generated reports have shown an alternative to easily extract knowledge from data in the context of Lattes platform. The source code, usage instructions and examples are available at http://scriptlattes.sourceforge.net/.

A framework for table driven testing of Java classes

With the advent of object-oriented languages and the portability of Java, the development and use of class libraries has become widespread. Effective class reuse depends on class reliability which in turn depends on thorough testing. This paper describes a class testing approach based on modeling each test case with a tuple and then generating large numbers of tuples to thoroughly cover an input space with many interesting combinations of values. The testing approach is supported by the Roast framework for the testing of Java classes. Roast provides automated tuple generation based on boundary values, unit operations that support driver standardization, and test case templates used for code generation. Roast produces thorough, compact test drivers with low development and maintenance cost. The framework and tool support are illustrated on a number of non-trivial classes, including a graphical user interface policy manager. Quantitative results are presented to substantiate the practicality and effectiveness of the approach. Copyright (C) 2002 John Wiley Sons, Ltd.

Uma Abordagem para a Geração de Casos de Teste Baseada em Modelos

Abstract — The analytical methods based on evaluation models of interactive systems were proposed as an alternative to user testing in the last stages of the software development due to its costs. However, the use of isolated behavioral models of the system limits the results of the analytical methods. An example of these limitations relates to the fact that they are unable to identify implementation issues that will impact on usability. With the introduction of model-based testing we are enable to test if the implemented software meets the specified model. This paper presents an model-based approach for test cases generation from the static analysis of source code.

Code Generator for Key Management Protocols - Design and Implementation

Key management has a fundamental role in secure communications. Designing and testing of key management protocols is tricky. These protocols must work flawlessly despite of any abuse. The main objective of this work was to design and implement a tool that helps to specify the protocol and makes it possible to test the protocol while it is still under development. This tool generates compile-ready java code from a key management protocol model. A modelling method for these protocols, which uses Unified Modeling Language (UML) was also developed. The protocol is modelled, exported as an XMI and read by the code generator tool. The code generator generates java code that is immediately executable with a test software after compilation.