Electrical properties of individual and small ensembles of InAs/InP nanostructures

We investigate electrical properties of InAs/InP semiconductor nanostructures by conductive atomic force microscopy (C-AFM) and current measurements at low temperatures in processed devices. Different conductances and threshold voltages for current onset were observed for each type of nanostructure. In particular, the extremity of the wire could be compared to a dot with similar dimensions. The processed devices were used in order to access the in-plane conductance of an assembly of a reduced number of nanostructures. Here, fluctuations on I-V curves at low temperatures (<40 K) were observed. At these low temperatures and for a suitable range of applied voltages, random telegraph noise (RTN) in the current was observed for devices with dots. These fluctuations can be associated to electrons trapped in dots, as suggested by numerical simulations. A crossover from a semiconductor-like to a metallic transport behavior is also observed for similar parameters. © 2006 WILEY-VCH Verlag GmbH & Co. KGaA.

Surfactant-cosurfactant interactions and process parameters involved in the formulation of stable and small droplet-sized benznidazole-loaded soybean O/W emulsions

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Processo de medição de desempenho em micro e pequenas empresas de um arranjo produtivo local

The local productive arrangements (LPA) are organizational mechanisms that enable the continuous performance of small businesses in production processes and business management models. To promote continuous improvement is essential that companies make decisions based on data that reflects business’ performance (performance measurement) and promote the cluster performance. This way, the aim of this article is to describe the performance measurement process that will support the corporate management of Micro and Small enterprises (SME) of a Local Productive Arrangement in Maringá, State of Paraná, Brazil. To develop this paper, the bibliographic search and action research methods were used. The field research was developed from the cooperation project (PROJVEST) conducted at the LPA, which goal is to deploy improvement actions in project’s participating companies. Metrics and performance indicators constructed from the diagnosis in the areas of Production, Quality and Ergonomics in companies will be presented. Among the main results, can be pointed out that the performance management of LPA is promoting the introduction of corporate management practices in SMEs, stimulating business cooperation, the continuous innovation in manufacturing processes and product quality and business processes.

Mechanical analysis of conventional and small diameter conical implant abutments

PURPOSE. The aim of the present study was to evaluate if a smaller morse taper abutment has a negative effect on the fracture resistance of implant-abutment connections under oblique compressive loads compared to a conventional abutment MATERIALS AND METHODS. Twenty morse taper conventional abutments (4.8 mm diameter) and smaller abutments (3.8 mm diameter) were tightened (20 Ncm) to their respective implants (3.5 x 11 mm) and after a 10 minute interval, implant/abutment assemblies were subjected to static compressive test, performed in a universal test machine with 1 mm/min displacement, at 45 degrees inclination. The maximum deformation force was determined. Data were statistically analyzed by student t test. RESULTS. Maximum deformation force of 4.8 mm and 3.8 mm abutments was approximately 95.33 kgf and 95.25 kgf, respectively, but no fractures were noted after mechanical test. Statistical analysis demonstrated that the evaluated abutments were statistically similar (P=.230). CONCLUSION. Abutment measuring 3.8 mm in diameter (reduced) presented mechanical properties similar to 4.8 mm (conventional) abutments, enabling its clinical use as indicated. [J Adv Prosthodont 2012;4:158-61]

Macroscopic and microbiological alterations of bird and small mammal bones buried in a Cerrado biome (south western Brazil)

In this paper, we present the results of an experimental approach developed to study the macroscopic and microbiological alteration of bird and small mammal bones buried under a Cerrado biome. The first experiment evaluated the macroscopic alteration of cooked and fresh carcasses buried through the dry and rainy seasons. The second experiment analyzed the mycobiota associated to the decomposition of a complete bird that remained buried for almost a year. Results show that in tropical forest environments: 1) bone structure and pre-taphonomic factors determine its differential alteration by biochemical processes; 2) fungal populations associated to the decomposition of animal remains depend on soil chemistry and ecological dynamics; 3) even in a corrosive environment, bird bones are more capable of surviving to several mycological decomposition steps. (C) 2011 Elsevier Ltd. All rights reserved.

The Experience of Micro and Macro Events: A Life-Span Analysis

This study investigated how individuals retrospectively construe their lives in terms of major life events. Ninety-nine participants sorted a set of personal and historical events in terms of perceived importance for their lives. Analyses of variance with repeated measures and rank comparisons were computed. Overall findings revealed no cohort differences with regard to the perception of life events. However, within-cohort differences were found, indicating that more life events were recalled from the young adult years. Those experiences were also perceived as having been more important in the participants' lives than events from other age segments. With regard to historical events, war-related experiences were among the highest ranked. Analyses of variance revealed intracohort differences but not intercohort differences, indicating higher scores for the time between 1930 and 1948 relative to other historical periods.

MEK/ERK-mediated phosphorylation of Bim is required to ensure survival of T and B lymphocytes during mitogenic stimulation

Survival and death of lymphocytes are regulated by the balance between pro- and antiapoptotic members of the Bcl-2 family; this is coordinated with the control of cell cycling and differentiation. Bim, a proapoptotic BH3-only member of the Bcl-2 family, can be regulated by MEK/ERK-mediated phosphorylation, which affects its binding to pro-survival Bcl-2 family members and its turnover. We investigated Bim modifications in mouse B and T lymphoid cells after exposure to apoptotic stimuli and during mitogenic activation. Treatment with ionomycin or cytokine withdrawal caused an elevation in Bim(EL), the most abundant Bim isoform. In contrast, in mitogenically stimulated T and B cells, Bim(EL) was rapidly phosphorylated, and its levels declined. Pharmacological inhibitors of MEK/ERK signaling prevented both of these changes in Bim, reduced proliferation, and triggered apoptosis of mitogen-stimulated T and B cells. Loss of Bim prevented this cell killing but did not restore cell cycling. These results show that during mitogenic stimulation of T and B lymphocytes MEK/ERK signaling is critical for two distinct processes, cell survival, mediated (at least in part) through phosphorylation and consequent inhibition of Bim, and cell cycling, which proceeds independently of Bim inactivation.

ASSOCIATIVISMO EMPRESARIAL ENTRE MICRO E PEQUENAS EMPRESAS: A EXPERIÊNCIA DO GRANDE ABC COM O PROJETO EMPREENDER (SEBRAE)

O associativismo empresarial aparece como forma de desenvolvimento regional, seja este econômico, social ou cultural, e é grande aliado para o surgimento e crescimento das micro e pequenas empresas. É um tema já vivenciado e estudado por vários países do mundo, entre eles europeus e especificamente italianos, mas ainda pouco estudado e conhecido no Brasil. A presente pesquisa objetivou analisar o associativismo empresarial entre micro e pequenas empresas (MPEs) na região do Grande ABC (GABC) pelo Projeto Empreender (SEBRAE) relacionando seus dados com os publicados do relatório 2003/5 de autoria do Observatório Europeu de estudos sobre pequenas e médias empresas europeias, analisando as formas de associativismo aqui ocorridas, além de identificar o perfil das empresas e empresários envolvidos no projeto. Para tal análise foram coletados dados de um total de 63 empresas do Projeto Empreender, nos núcleos de Santo André, São Caetano do Sul e Ribeirão Pires. Do GABC foram coletados dados utilizando o instrumento desenvolvido pelo Observatório Europeu de estudos sobre pequenas e médias empresas. A análise dos dados coletados no GABC em relação aos dados europeus se fez necessária para que pudessem ser encontrados pontos de divergências e convergências em cada uma das experiências, objetivando o aprendizado e evolução do tema. A escolha do GABC foi motivada pelo fato da região passar por mudanças no seu perfil econômico, passando de berço e grande pólo das grandes indústrias para um grande centro de pequenas empresas prestadoras de serviços. Após coleta e análise dos dados, percebeu-se que a experiência do GABC e a ocorrida na Itália se parecem em muitos aspectos, porém tem grandes diferenças estruturais. Enquanto o projeto europeu é de responsabilidade de um órgão da União Europeia, aqui o projeto é de autoria do SEBRAE e sofre grandes conflitos com as Associações Comerciais e Industriais (ACIs) da região quando o tema é custeio das despesas das pessoas e estrutura que envolve a implantação do projeto. Além disso, conclui-se que é necessária uma maior aproximação dos municípios com o projeto, tendo em vista que isto poderia ser fator de incentivo a entrada de novas empresas além de fator de aumento de seriedade do sistema. Mais dois dados merecem destaque. Primeiro o fato do Projeto Empreender ter pouca visibilidade regional, ou seja, ser muito pouco divulgado, e o fato da agência de desenvolvimento do GABC não ter aproximação alguma com o projeto. Por último, surgem dados no decorrer da pesquisa que rompem a barreira das teorias administrativas conhecidas, tais como a amizade como fator de associativismo. Portanto, os resultados obtidos com essa pesquisa apontam para a influência no incentivo ao desenvolvimento do processo associativista na região do GABC, além de servir como incentivador para a aproximação de outros atores sociais no processo.(AU)

ASSOCIATIVISMO EMPRESARIAL ENTRE MICRO E PEQUENAS EMPRESAS: A EXPERIÊNCIA DO GRANDE ABC COM O PROJETO EMPREENDER (SEBRAE)

O associativismo empresarial aparece como forma de desenvolvimento regional, seja este econômico, social ou cultural, e é grande aliado para o surgimento e crescimento das micro e pequenas empresas. É um tema já vivenciado e estudado por vários países do mundo, entre eles europeus e especificamente italianos, mas ainda pouco estudado e conhecido no Brasil. A presente pesquisa objetivou analisar o associativismo empresarial entre micro e pequenas empresas (MPEs) na região do Grande ABC (GABC) pelo Projeto Empreender (SEBRAE) relacionando seus dados com os publicados do relatório 2003/5 de autoria do Observatório Europeu de estudos sobre pequenas e médias empresas europeias, analisando as formas de associativismo aqui ocorridas, além de identificar o perfil das empresas e empresários envolvidos no projeto. Para tal análise foram coletados dados de um total de 63 empresas do Projeto Empreender, nos núcleos de Santo André, São Caetano do Sul e Ribeirão Pires. Do GABC foram coletados dados utilizando o instrumento desenvolvido pelo Observatório Europeu de estudos sobre pequenas e médias empresas. A análise dos dados coletados no GABC em relação aos dados europeus se fez necessária para que pudessem ser encontrados pontos de divergências e convergências em cada uma das experiências, objetivando o aprendizado e evolução do tema. A escolha do GABC foi motivada pelo fato da região passar por mudanças no seu perfil econômico, passando de berço e grande pólo das grandes indústrias para um grande centro de pequenas empresas prestadoras de serviços. Após coleta e análise dos dados, percebeu-se que a experiência do GABC e a ocorrida na Itália se parecem em muitos aspectos, porém tem grandes diferenças estruturais. Enquanto o projeto europeu é de responsabilidade de um órgão da União Europeia, aqui o projeto é de autoria do SEBRAE e sofre grandes conflitos com as Associações Comerciais e Industriais (ACIs) da região quando o tema é custeio das despesas das pessoas e estrutura que envolve a implantação do projeto. Além disso, conclui-se que é necessária uma maior aproximação dos municípios com o projeto, tendo em vista que isto poderia ser fator de incentivo a entrada de novas empresas além de fator de aumento de seriedade do sistema. Mais dois dados merecem destaque. Primeiro o fato do Projeto Empreender ter pouca visibilidade regional, ou seja, ser muito pouco divulgado, e o fato da agência de desenvolvimento do GABC não ter aproximação alguma com o projeto. Por último, surgem dados no decorrer da pesquisa que rompem a barreira das teorias administrativas conhecidas, tais como a amizade como fator de associativismo. Portanto, os resultados obtidos com essa pesquisa apontam para a influência no incentivo ao desenvolvimento do processo associativista na região do GABC, além de servir como incentivador para a aproximação de outros atores sociais no processo.(AU)

Textural Characterization of Micro- and Mesoporous Carbons Using Combined Gas Adsorption and n-Nonane Preadsorption

Porous carbon and carbide materials with different structures were characterized using adsorption of nitrogen at 77.4 K before and after preadsorption of n-nonane. The selective blocking of the microporosity with n-nonane shows that ordered mesoporous silicon carbide material (OM-SiC) is almost exclusively mesoporous whereas the ordered mesoporous carbon CMK-3 contains a significant amount of micropores (25%). The insertion of micropores into OM-SiC using selective extraction of silicon by hot chlorine gas leads to the formation of ordered mesoporous carbide-derived carbon (OM-CDC) with a hierarchical pore structure and significantly higher micropore volume as compared to CMK-3, whereas a CDC material from a nonporous precursor is exclusively microporous. Volumes of narrow micropores, calculated by adsorption of carbon dioxide at 273 K, are in linear correlation with the volumes blocked by n-nonane. Argon adsorption measurements at 87.3 K allow for precise and reliable calculation of the pore size distribution of the materials using density functional theory (DFT) methods.

Structural Characterization of Micro- and Mesoporous Carbon Materials Using In Situ High Pressure 129Xe NMR Spectroscopy

In situ high pressure 129Xe NMR spectroscopy in combination with volumetric adsorption measurements were used for the textural characterization of different carbon materials with well-defined porosity including microporous carbide-derived carbons, ordered mesoporous carbide-derived carbon, and ordered mesoporous CMK-3. Adsorption/desorption isotherms were measured also by NMR up to relative pressures close to p/p0 = 1 at 237 K. The 129Xe NMR chemical shift of xenon adsorbed in porous carbons is found to be correlated with the pore size in analogy to other materials such as zeolites. In addition, these measurements were performed loading the samples with n-nonane. Nonane molecules preferentially block the micropores. However, 129Xe NMR spectroscopy proves that the nonane also influences the mesopores, thus providing information about the pore system in hierarchically structured materials.

Directions for preparing scientific specimens of large and small mammals, birds, birds' stomachs for economic investigations, birds' nests and eggs, fish and reptiles /

"Issued January 15, 1914."

Employment opportunities for students trained in international relations and area studies; a directory of governmental and private enterprises which employ students trained in international affairs.

Includes bibliographical references.