Interaction of water with the fluorine-covered anatase TiO2(001) surface

The interaction of water with the fluorine-covered (001) surface of anatase titanium dioxide (TiO2) has been studied within the framework of density functional theory (DFT). Our results show that water dissociation is unfavorable due to repulsive interactions between surface fluorine and oxygen. We also found that the reaction of hydrofluoric acid with a surface hydroxyl group to form a surface Ti–F bond is exothermic, while the removal of fluorine from the surface needs additional energy of about half an eV. Therefore, water molecules are predicted to remain intact at the interface with the F-terminated anatase (001).

Controlling whole blood activation and resultant clot properties by carboxyl and alkyl functional groups on material surfaces : a possible therapeutic approach for enhancing bone healing

Most research virtually ignores the important role of a blood clot in supporting bone healing. In this study, we investigated the effects of surface functional groups carboxyl and alkyl on whole blood coagulation, complement activation and blood clot formation. We synthesised and tested a series of materials with different ratios of carboxyl (–COOH) and alkyl (–CH3, –CH2CH3 and –(CH2)3CH3) groups. We found that surfaces with –COOH/–(CH2)3CH3 induced a faster coagulation activation than those with –COOH/– CH3 and –CH2CH3, regardless of the –COOH ratios. An increase in –COOH ratios on –COOH/–CH3 and –CH2CH3 surfaces decreased the rate of coagulation activation. The pattern of complement activation was entirely similar to that of surface-induced coagulation. All material coated surfaces resulted in clots with thicker fibrin in a denser network at the clot/material interface and a significantly slower initial fibrinolysis when compared to uncoated glass surfaces. The amounts of platelet-derived growth factor-AB (PDGF-AB) and transforming growth factor-b (TGF-b1) released from an intact clot were higher than a lysed clot. The release of PDGF-AB was found to be correlated with the fibrin density. This study demonstrated that surface chemistry can significantly influence the activation of blood coagulation and complement system, resultant clot structure, susceptibility to fibrinolysis as well as release of growth factors, which are important factors determining the bone healing process.

The role of syllables in sign language production

The aim of the present study was to investigate the functional role of syllables in sign language and how the different phonological combinations influence sign production. Moreover, the influence of age of acquisition was evaluated. Deaf signers (native and non-native) of Catalan Signed Language (LSC) were asked in a picture-sign interference task to sign picture names while ignoring distractor-signs with which they shared two phonological parameters (out of three of the main sign parameters: Location, Movement, and Handshape). The results revealed a different impact of the three phonological combinations. While no effect was observed for the phonological combination Handshape-Location, the combination Handshape-Movement slowed down signing latencies, but only in the non-native group. A facilitatory effect was observed for both groups when pictures and distractors shared Location-Movement. Importantly, linguistic models have considered this phonological combination to be a privileged unit in the composition of signs, as syllables are in spoken languages. Thus, our results support the functional role of syllable units during phonological articulation in sign language production.

The influence of the microstructure evolution on the surface morphology in the annealing process of helium-implanted spinel

Single-crystalline spinel (MgAl2O4) specimens were implanted with helium ions of 100 keV at three successively increasing fluences of (0.5, 2.0 and 8.0) x 10(16) ions/cm(2) at room temperature. The specimens were subsequently annealed in vacuum at different temperatures ranging from 500 to 1100 degrees C. Different techniques, including Fourier transformed infrared spectroscopy (FTIR), thermal desorption spectrometry (TDS), atomic force microscopy (AFM) and scanning electron microscopy (SEM) were used to investigate the specimens, It was found that the absorbance peak in the FTIR due to the stretching vibration of the Al-O bond shifts to smaller wave numbers with increasing fluence, shifting back to larger wave numbers with an increase of annealing temperature. The absorbance peak shift has a linear relationship with the fluence increase in the as-implanted state, while it does not have a linear relationship with the fluence increase after the annealing process. Surface deformation occurred in the specimens implanted with fluences of 2.0 and 8.0 x 10(16) ions/cm(2) in the annealing process. The phenomena described above can be attributed to differences in defect formation in the specimens. (C) 2008 Elsevier B.V. All rights reserved.

The influence of cognitive resources on compensatory arm responses

The purpose of this study was to determine the influence of an ongoing cognitive task on an individual’s ability to generate a compensatory arm response. Twenty young and 16 older adults recovered their balance from a support surface translation while completing a cognitive (counting) task of varying difficulty. Surface electromyographic (EMG) recordings from the shoulders and kinematics of the right arm were collected to quantify the compensatory arm response. Results indicated that the counting task, regardless of its difficulty as well as the age of the individual, had minimal influence on the onset or magnitude of arm muscle activity that occurred following a loss of balance. In contrast to previous research, this study’s findings suggest that the cortical or cognitive resources utilized by the cognitive task are not relied upon for the generation of compensatory arm responses and that older adults are not disproportionately affected by dual-tasking than young adults.

Profilage Moléculaire de la Scoliose Idiopathique de l’Adolescent

La scoliose idiopathique de l’adolescent (SIA) est la déformation la plus fréquente en orthopédie pédiatrique. C'est une maladie qui génère des déformations complexes du rachis, du thorax et du bassin affectant plus sévèrement et majoritairement les filles à la puberté. Malgré de nombreuses années de recherches approfondies dans le domaine de la SIA, la cause n'a toujours pas été résolue. OBJECTIFS : Il a été démontré qu’il existe une dysfonction de la signalisation de la mélatonine par les protéines G inhibitrices (Gi) dans les ostéoblastes isolés de patients atteints de SIA. Ceci a conduit à une stratification des patients en trois groupes fonctionnels. Le but de ce projet de maîtrise est d’établir les profils d’expression moléculaire correspondant à chacun des groupes fonctionnels. Les objectifs spécifiques sont d’identifier les gènes responsables de l’initiation de la SIA et du défaut différentiel observé dans la signalisation des récepteurs couplés aux protéines Gi. MÉTHODES : Des ARNs ont été préparés à partir d’ostéoblastes isolés de patients atteints de SIA sélectionnés pour chaque groupe fonctionnel et comparés aux ARNs obtenus d’ostéoblastes de sujets sains. En plus, des cellules sanguines (PBMCs) isolées d’une paire de jumelles monozygotes discordantes pour la scoliose ont été étudiées pour comparer leur profil d’expression génétique. Nous avons utilisé des biopuces à ADN contenant un ensemble de 54,000 sondes permettant l’analyse du niveau d’expression de plus de 47,000 transcrits représentant 30,000 gènes humains bien caractérisés (Affymetrix, GeneChip® Human gene 1.0 ST array). Les gènes retenus ont par la suite été validés par qPCR sur un plus grand nombre de patients afin de tester la spécificité des profils d’expression pour chaque groupe de patients à partir des cellules osseuses dérivées lors de la chirurgie. RÉSULTATS: Le profilage moléculaire proposé permettra d’établir les fondements moléculaires de la SIA selon le test fonctionnel développé par le Dr Moreau et son équipe et d’identifier de nouveaux gènes associés à la SIA. Ce projet a permis de mettre en évidence des gènes possiblement impliqués dans le défaut de signalisation associé aux protéines Gi communs aux trois groupes, ainsi que des gènes spécifiques à certains groupes, pouvant contribuer au développement de certaines co-morbidités et/ou au risque d’aggravation des déformations rachidiennes. L’étude préliminaire des jumelles monozygotes discordantes pour la scoliose a mis en évidence un nombre limité de gènes possiblement associés au défaut de signalisation observé chez la jumelle scoliotique, gènes dont l’expression pourrait être influencée par des modifications d’ordre épigénétique liées à l’environnement. CONCLUSION: Les données obtenues par des approches de transcriptomiques dans le cadre de ce projet soutiennent notre méthode de stratification fonctionnelle des patients SIA et ont conduit à l’identification de nouveaux gènes associés à la SIA. Ces résultats jettent un éclairage nouveau sur la SIA et contribuent à une meilleure compréhension des mécanismes et facteurs impliqués dans l’étiologie de la SIA. À cet égard, nos résultats permettront éventuellement d’identifier des cibles thérapeutiques potentielles et des traitements personnalisés compte tenu des profils moléculaires distincts observés pour chaque groupe de patients.

Significance of soil microorganisms with special reference to climate change

There are a large number of agronomic-ecological interactions that occur in a world with increasing levels of CO2, higher temperatures and a more variable climate. Climate change and the associated severe problems will alter soil microbial populations and diversity. Soils supply many atmospheric green house gases by performing as sources or sinks. The most important of these gases include CH4, CO2 and N2O. Most of the green house gases production and consumption processes in soil are probably due to microorganisms. There is strong inquisitiveness to store carbon (C) in soils to balance global climate change. Microorganisms are vital to C sequestration by mediating putrefaction and controlling the paneling of plant residue-C between CO2 respiration losses or storage in semi-permanent soil-C pools. Microbial population groups and utility can be manipulated or distorted in the course of disturbance and C inputs to either support or edge the retention of C. Fungi play a significant role in decomposition and appear to produce organic matter that is more recalcitrant and favor long-term C storage and thus are key functional group to focus on in developing C sequestration systems. Plant residue chemistry can influence microbial communities and C loss or flow into soil C pools. Therefore, as research takings to maximize C sequestration for agricultural and forest ecosystems - moreover plant biomass production, similar studies should be conducted on microbial communities that considers the environmental situations

Influence of acid-etching and ceramic primers on the repair of a glass ceramic

The objective of this study was to evaluate the influence of different primers on the microtensile bond strength (μT BS) between a feldspathic ceramic and two composites. Forty blocks (6.0 × 6.0 × 5.0 mm 3) were prepared from Vita Mark II . After polishing, they were randomly divided into 10 groups according to the surface treatment: Group 1, hydrofluoric acid 10% (HF) + silane; Group 2, CoJet + silane; Group 3, HF + Metal/Zirconia Primer; Group 4, HF + Clearfil Primer; Group 5, HF + Alloy Primer; Group 6, HF + V-Primer; Group 7, Metal/Zirconia Primer; Group 8, Clearfil Primer; Group 9, Alloy Primer; Group 10, V-Primer. After each surface treatment, an adhesive was applied and one of two composite resins was incrementally built up. The sticks obtained from each block (bonded area: 1.0 mm2 ± 0.2 mm) were stored in distilled water at 37°C for 30 days and submitted to thermocycling (7,000 cycles; 5°C/55°C ± 1°C). The μT BS test was carried out using a universal testing machine (1.0 mm/min). Data were analyzed using ANOVA and a Tukey test (α = 0.05). The surface treatments significantly affected the results (P < 0.05); no difference was observed between the composites (P > 0.05). The bond strength means (MPa) were as follows: Group 1a = 29.6; Group 1b = 33.7; Group 2a = 28.9; Group 2b = 27.1; Group 3a = 13.8; Group 3b = 14.9; Group 4a = 18.6; Group 4b = 19.4; Group 5a = 15.3; Group 5b = 16.5; Group 6a = 11; Group 6b = 18; Groups 7a to 10b = 0. While the use of primers alone was not sufficient for adequate bond strengths to feldspathic ceramic, HF etching followed by any silane delivered higher bond strength.

Alterações sensoriais e motoras associadas ao envelhecimento e controle postural de idosos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeitos da atividade física no controle postural e capacidade funcional de idosos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of amino-terminated substrates onto surface properties of cellulose esters and their interaction with lectins

Films of cellulose acetate butyrate (CAB) and carboxymethylcellulose acetate butyrate (CMCAB) were deposited from ethyl acetate solutions onto bare silicon wafers (Si/SiO2) or amino-terminated surfaces (APS) by means of equilibrium adsorption. All surfaces were characterized by means of ellipsometry, atomic force microscopy (AFM) and contact angle measurements. The presence of amino groups on the support surface favored the adsorption of CAB and CMCAB, inducing the orientation almost polar groups to the surface and the exposition of alkyl group to the air. Such molecular orientation caused increase of the dispersive component of surface energy (gamma(d)(s)) and decrease of the polar component of surface energy (gamma(p)(s)) of cellulose esters in comparison to those values determined for films deposited onto bare Si/SiO2 wafers. Adsorption behavior of jacalin or concanavalin A onto CAB and CMCAB films was also investigated. The adsorbed amounts of lectins were more pronounced on cellulose esters with high (gamma(p)(s)) and total surface energy (gamma(t)(s)) values. (C) 2011 Elsevier B.V. All rights reserved.

Synthetical engineering of supramolecular properties of large polycyclic aromatic hydrocarbons

An important property for devices is the charge-carrier mobility values for discotic organic materials like hexa-peri-hexabenzocoronenes. A close relation exists between the degree of their columnar self-arrangement of the molecules and their mobilities. Within this first step an induction of a higher order via hydrogen-bonding was considered, which mainly pointed towards the improvement of the intracolumnar stacking of the materials. For the analytics a broad range of methods was used including differential scanning calorimetry (DSC), wide-angle X-ray diffractometry (WAXS), solid-state NMR spectroscopy and scanning tunneling microscopy (STM). Indeed, a specific influence of the hydrogen-bonds could be identified, although in several cases by the cost of a severe reduction of solubility and processability. This effect was dampened by the addition of a long alkyl chain next to the hydrogen-bond exerting functional group, which resulted in an improved columnar arrangement by retention of processability. In contrast to the before mentioned example of inducing a higher intracolumnar order by hydrogen-bonding, the focus was also be set upon larger aromatic systems. The charge-carrier mobility is also in close relation to the size of the aromatic core and larger π-areas are expected to lead to improved mobilities. For photovoltaic applications a high extinction coefficient over a broad range of the spectrum is favorable, which can also be achieved by enlarging the aromatic core component. In addition the stronger π-interactions between the aromatic core components should yield an improved columnar stability and order. However the strengthening of the π-interactions between the aromatic core components led to a reduction of the solubility and the processability due to the stronger aggregation of the molecules. This required the introduction of efficiently solubilizing features in terms of long alkyl chains in the corona of the aromatic entity, in combination of a distortion of the aromatic core moiety by bulky tert-butyl groups. By this approach not only the processing and cleaning of the materials with standard laboratory techniques became possible, but moreover the first structure-rich UV/vis and a resolved 1H-NMR spectra for an aromatic system two times larger than hexa-peri-hexabenzocoronene were recorded. The bulk properties in an extruded fiber as well as on the surface showed a columnar self-assembly including a phase in which a homeotropic alignment on a substrate was observed, which turns the material into an interesting candidate for future applications in electronic devices.

Influence of the condition of the adjacent tooth surface on fluorescence measurements for the detection of approximal caries

The aim of this study was to test whether the status of the adjacent tooth surface has an influence on the signal of a new laser fluorescence (LF) device for the detection of approximal caries. Seventy-eight teeth were selected from a pool of extracted permanent human molars, frozen at -20 degrees C until use. Before being measured the teeth were defrosted, cleaned, and any calculus removed. As a control, a defined approximal surface of each tooth was measured with the LF device holding the tip with the detecting- and the reverse-side on it, but without a neighboring tooth contacting the surface. The proximal site under examination was then placed adjacent to a tooth, which had deep dentinal caries, a composite restoration, a provisional ZnO-Eugenol restoration, or a ceramic restoration. The adjacent tooth with the ZnO-Eugenol restoration, the composite restoration, and the dentinal caries all demonstrated a statistically significant increase of LF readings on sound tooth surfaces. Teeth with enamel or dentinal caries were only slightly (and not statistically significantly) influenced by the different types of neighboring surfaces compared with the control LF readings. It can be concluded that caries detection of approximal tooth surfaces with the new LF system might be influenced by the condition of the adjacent tooth surface.

Estudo da seletividade de catalisadores a base de cobre e paládio em transformações de hidrocarbonetos insaturados

Compreender a correlação entre as características de um catalisador particular e seu desempenho catalítico tem sido um dos principais objetos da pesquisa em catálise heterogênea a fim de usar esse conhecimento para o desenho racional de catalisadores mais ativos, seletivos e estáveis. A seletividade é um dos fatores mais importantes a ser controlado pelo desenho de catalisadores, podendo ser alcançada de diversas maneiras, levando-se em consideração mudanças do tipo estrutural, química, eletrônica, de composição, de cinética e de energia. O trabalho descrito nessa tese de doutorado compreende a síntese e caracterização de catalisadores compostos de nanopartículas de óxido de cobre, paládio e cobre-paládio e seu estudo em reações de hidrogenação e oxidação seletivas de hidrocarbonetos insaturados. Os catalisadores foram preparados através da deposição de nanopartículas dos metais cataliticamente ativos sobre suportes magneticamente recuperáveis compostos de nanopartículas de magnetita revestidas por sílica com superfícies funcionalizada com diferentes grupos orgânicos. A natureza magnética do suporte permitiu a fácil separação do catalisador do meio reacional pela simples aproximação de um ímã na parede do reator. O catalisador pôde ser completamente separado da fase líquida, fazendo com que a utilização de outros métodos de separação como filtração e centrifugação, comumente utilizados em sistemas heterogêneos líquidos, fossem completamente dispensados. Os catalisadores foram inicialmente testados em reações de hidrogenação de alquenos e alquinos. As reações de hidrogenação foram realizadas utilizando hidrogênio molecular como agente redutor, dispensando a utilização de agentes redutores mais agressivos. Os catalisadores compostos de NPs de Pd mostram excelente atividade e capacidade de reutilização na hidrogenação de cicloexeno, podendo ser utilizados em até 15 ciclos sem perda de atividade. Nas reações de hidrogenação de alquinos, os catalisadores que contêm cobre mostraram maior seletividade para a obtenção dos produtos de semi-hidrogenação, com destaque para o catalisador composto de NPs de CuPd, que não apresenta nem traços do produto de hidrogenação completa na amostra final. Esse catalisador bimetálico alia as características do paládio (elevada atividade) e do cobre (elevada seletividade) para fornecer um catalisador ativo e seletivo para a transformação desejada. Além disso, os grupos funcionais presentes na superfície do suporte catalítico mostraram influência na atividade e seletividade para a hidrogenação de alquenos e alquinos. Os catalisadores sintetizados também foram testados na reação de oxidação de cicloexeno e mostraram seletividade para a produção do composto carbonílico α,β-insaturado, cicloex-2-en-1-ona, que é um reagente de partida de grande interesse para a síntese de diversos materiais na indústria química. As reações de oxidação foram realizadas utilizando-se apenas O2 como oxidante primário, dispensando o uso de oxidantes tóxicos como cromatos, permanganatos ou compostos halogenados, que não são recomendados do ponto de vista ambiental. Os catalisadores sintetizados puderam ser reutilizados em sucessivos ciclos de oxidação, mostrando seletividade para a formação dos produtos alílicos em todos os ciclos. Os catalisadores foram estáveis sob as condições reacionais e não apresentaram problemas de lixiviação da espécie ativa para o meio reacional, que é comum na catálise heterogênea. Um estudo cinético mostrou que, mesmo no início da reação, o catalisador tem seletividade para a ocorrência de oxidação alílica em detrimento da reação de oxidação direta que dá origem ao epóxidos correspondente, e se mostrou condizente com o mecanismo proposto na literatura para a reação de oxidação de alquenos via radicalar.

Relevance of porosity and surface chemistry of superactivated carbons in capacitors

We show, through some examples, that chemical activation by alkaline hydroxides permits the preparation of activated carbons with tailored pore volume, pore size distribution, pore structure and surface chemistry, which are useful for their application as electrodes in supercapacitors. Examples are presented discussing the importance of each of these properties on the double layer capacitance, on the kinetics of the electric double-layer charge-discharge process and on the pseudo-capacitative contribution from the surface functional groups or the addition of a conducting polymer.