Uso de geotecnologias na análise temporal dos impactos da urbanização na sub-bacia do Córrego Sem Nome em Ilha Solteira/SP

Pós-graduação em Engenharia Civil - FEIS

Possible involvement of A1 receptors in the inhibition of gonadotropin secretion induced by adenosine in rat hemipituitaries in vitro

We investigated the participation of A₁ or A₂ receptors in the gonadotrope and their role in the regulation of LH and FSH secretion in adult rat hemipituitary preparations, using adenosine analogues. A dose-dependent inhibition of LH and FSH secretion was observed after the administration of graded doses of the R-isomer of phenylisopropyladenosine (R-PIA; 1 nM, 10 nM, 100 nM, 1 µM and 10 µM). The effect of R-PIA (10 nM) was blocked by the addition of 8-cyclopentyltheophylline (CPT), a selective A₁ adenosine receptor antagonist, at the dose of 1 µM. The addition of an A₂ receptor-specific agonist, 5-N-methylcarboxamidoadenosine (MECA), at the doses of 1 nM to 1 µM had no significant effect on LH or FSH secretion, suggesting the absence of this receptor subtype in the gonadotrope. However, a sharp inhibition of the basal secretion of these gonadotropins was observed after the administration of 10 µM MECA. This effect mimicked the inhibition induced by R-PIA, supporting the hypothesis of the presence of A₁ receptors in the gonadotrope. R-PIA (1 nM to 1 µM) also inhibited the secretion of LH and FSH induced by phospholipase C (0.5 IU/ml) in a dose-dependent manner. These results suggest the presence of A₁ receptors and the absence of A₂ receptors in the gonadotrope. It is possible that the inhibition of LH and FSH secretion resulting from the activation of A₁ receptors may have occurred independently of the increase in membrane phosphoinositide synthesis.

Reaproveitamento de lama vermelha na obtenção de compostos do tipo hidrotalcita do sistema (Zn-Ni-Cu/Fe-Al)-SO4

Compostos do tipo hidrotalcita, também conhecidos como hidróxidos duplos lamelares (HDLs), do sistema (Zn-Ni-Cu/Fe-Al)-SO₄ foram obtidos por meio de co-precipitação a pH variável (crescente) utilizando lama vermelha (LV) como material de partida devido a sua elevada porcentagem de Fe³⁺ e Al³⁺. Para tal estudo, a LV, previamente caracterizada por FRX e DRX, foi submetida à abertura ácida com HCl_conc. e H₂SO₄ 2N. Para os HDLs obtidos, foram avaliados a influência do tipo de cátion bivalente, da variação do pH de síntese (pH 5, 7, 8, 9, 10 e 12) e da variação de razão molar teórica r = M^II/M^III (2, 3 e 4) na sua estrutura cristalina mediante as seguintes técnicas de caracterização: DRX, FT-IR, MEV/EDS, TG/ATD. Os resultados FRX revelaram que a LV é composta principalmente por Fe₂O₃ (32,80%), Al₂O₃ (19,83%), SiO₂ (18,14%) e Na₂O (11,55%). DRX corrobora os resultados da análise química, visto que foram identificados os minerais: hematita, goethita, gibbsita, sodalita, calcita, anatásio e quartzo. Zn-HDLs mostraram que a o aumento de pH de síntese colabora para um melhor ordenamento cristalino do material, uma vez que os picos se tornam melhor definidos, culminando com a melhor condição experimental em pH 9 e r = 3, cujo HDL foi identificado como o mineral natroglaucocerinita (d~11 Ǻ). Nesses valores de pH, a incorporação de SO₄^2- no espaçamento interlamelar foi favorecida apesar da competição com o CO₂ presente no ar atmosférico no momento da síntese. FT-IR também indica a presença do sulfato. As análises por MEV revelam a presença de cristais muito finos e pequenos, > 2μm, de forma hexagonal que pela análise via EDS indicaram, em sua composição, os elementos Na, Zn, Fe, Al, S, C e O. TG/ATD evidenciaram quatro etapas de perda de massa: desidratação, desidroxilação, desoxidenação e dessulfatação, para os HDLs com melhor ordenamento cristalino. Para os materiais menos cristalinos, as duas primeiras etapas ocorrem simultaneamente. Ni-HDLs apresentaram três picos com posições próximas às do mineral carrboydita a partir de pH igual a 7. No entanto, a partir de pH 9, surge hematita como uma fase acessória. Também há disputa entre os ânions SO₄^2- e CO₃^2- no espaço interlamelar, visto que os valores de espaçamento basal d diminuem (de aproximadamente 9,5 até 7,8 Ǻ). Tal fato também foi observado pelo FT-IR. As análises por MEV mostraram aglomerados de minerais anédricos menores que 2μm que, via EDS indicaram composição Ni, Fe, Al, S, C e O. As análises de TG/ATD apresentaram o mesmo comportamento do sistema anterior, evidenciaram as etapas de desidratação, desidroxilação, desoxigenação e dessulfatação e, para os materiais menos cristalinos, as duas primeiras etapas também ocorrem simultaneamente. Cu-HDLs, em valores de pH entre 7 e 10, não cristalizaram a fase HDL tal qual verificada para os sistemas contendo zinco ou níquel. O cobre distorce a estrutura do octaedro causando o chamado Efeito Jahn-Teller: distorção tetraédrica no ambiente octaédrico. As análises por FT-IR apresentaram o mesmo comportamento dos sistemas anteriores, apesar de o material se apresentar amorfo via DRX. O MEV também revela aglomerados amorfos que, de acordo com o EDS, indicaram em sua composição os elementos Cu, Fe, Al, S, C e O. As análises de TG/ATD apresentaram o mesmo comportamento que os materiais menos cristalinos dos dois sistemas anteriores, para os quais as etapas de desidratação e desidroxilação ocorreram simultaneamente. Mt-HDLs (mistura de Zn²⁺, Ni²⁺, Cu²⁺), apresentaram comportamento semelhante aos HDLs de níquel, com quatro picos em posições próximas aos da carrboydita a partir de pH igual a 7. A disputa entre sulfato e carbonato também se repete, visto que os valores de espaçamento basal d diminuem (de aproximadamente 9,5 até 7,9 Ǻ), o que também pode ser notado nos espectros de FT-IR. O MEV dessas amostras também apresentaram aglomerados com tamanhos menores que 2μm e, via EDS, indicaram em sua composição os elementos Zn, Cu, Ni, Fe, Al, S, C e O. Aqui também o comportamento das curvas TG/ATD foi semelhante aos materiais pouco cristalinos obtidos anteriormente.

A cunha do ciclo de fácies do Grupo Guatá (Eopermiano) na margem sub-aflorante do norte paranaense

A wedge facies cycle it‟s a body of sedimentary rock, bounded above and below by unconformity and which represents a transgressive-regressive cycle of deposition. This cycle is formed by the following succession of facies: non-marine (N), transitional-coarse texture, and marine-fine texture; The objective of this study have been members of the sandstones and Triumph Siderópolis, seconded by rare calcareous sandstones and very thin limb Paraguaçu. Through analysis of facies in wells testified by CPRM, it was possible to group on facies successions and set the standard stacking. The Triunfo Member consists of three cycles of facies, lithology whose standard indicates a vertical arrangement ''type'' tuning up, other words, a component sandy bottom in the form of '' box'', followed by components sandy-clayey and clayey-carbonaceous (1st and 2nd cycle) and / or shale and limestone (3rd cycle), represented by the base member Paraguaçu. The first cycle only occurs on NF-5 wells and NF-6 in the form of Onlap channel dug in post-Itararé group. The cycle II also reaches wells NF-4 and NF-3 to the north, while the cycle III reaches the southern area, well NF-9. The member Paraguaçu, well PP-25 is predominantly clay-síltico, also stand out limestones and sandstones. The limestones are not coastal marine organisms probably connected with the algae and cyanobacteria, the sandstones are fine-textured, very thin and coastal deposition environment. The member Siderópolis, well NF-2 consists of a sandstone fluvial-estuarine deployed in the valley section, and succeeded by sandstones and siltstones bioturbed, they have linked the transgression of the Fm. Palermo

Feeding ecology of the American freshwater goby Ctenogobius shufeldti (Gobiidae, Perciformes) in a sub-tropical estuary

The feeding ecology of the American freshwater goby Ctenogobius shufeldti in a low salinity salt-marsh habitat in the Paranagua Bay estuarine complex (Brazil) was assessed through the gut analysis of 632 individuals. The effects of a set of abiotic factors (type of sediment, salinity, temperature and estuarine reach), season and body size on dietary composition were analysed. Seasonal and size-related changes in feeding strategy, feeding intensity and trophic level were assessed. The effects of gape and body size on prey size use were also analysed. The results showed that C. shufeldti is a typical omnivorous, generalized benthic predator of low trophic levels throughout the seasons and size classes, feeding on 56 dietary items; tanaids, chlorophyte algae, ostracods, gastropods, detritus and benthic diatoms made up the bulk of its diet. The tanaid Kalliapseudes schubarti was the main prey item in both numerical and volumetric terms. The gut fullness was persistently high across the seasons. As expected for a typical generalized, opportunistic omnivorous feeder: (1) seasonal and spatial-temporal variability of abiotic factors had a significant effect on diet structure, (2) season accounted for most of the dietary variation and (3) diet composition and the size of prey consumed did not vary across the size classes.

Optimal current control for sub-unity power factor correction

Switching mode power supplies (SMPS) are subject to low power factor and high harmonic distortions. Active power-factor correction (APFC) is a technique to improve the power factor and to reduce the harmonic distortion of SMPSs. However, this technique results in double frequency output voltage variation which can be reduced by using a large output capacitance. Using large capacitors increases the cost and size of the converter. Furthermore, the capacitors are subject to frequent failures mainly caused by evaporation of the electrolytic solution which reduce the converter reliability. This thesis presents an optimal control method for the input current of a boost converter to reduce the size of the output capacitor. The optimum current waveform as a function of weighing factor is found by using the Euler Lagrange equation. A set of simulations are performed to determine the ideal weighing which gives the lowest possible output voltage variation as the converter still meets the IEC-61000-3-2 class-A harmonics requirements with a power factor of 0.8 or higher. The proposed method is verified by the experimental work. A boost converter is designed and it is run for different power levels, 100 W, 200 W and 400 W. The desired output voltage ripple is 10 V peak to peak for the output voltage of 200 Vdc. This ripple value corresponds to a ± 2.5% output voltage ripple. The experimental and the simulation results are found to be quite matching. A significant reduction in capacitor size, as high as 50%, is accomplished by using the proposed method.

Soil, snow, weather, and sub-surface storage data from a mountain catchment in the rain-snow transition zone

A comprehensive hydroclimatic data set is presented for the 2011 water year to improve understanding of hydrologic processes in the rain-snow transition zone. This type of dataset is extremely rare in scientific literature because of the quality and quantity of soil depth, soil texture, soil moisture, and soil temperature data. Standard meteorological and snow cover data for the entire 2011 water year are included, which include several rain-on-snow events. Surface soil textures and soil depths from 57 points are presented as well as soil texture profiles from 14 points. Meteorological data include continuous hourly shielded, unshielded, and wind corrected precipitation, wind speed, air temperature, relative humidity, dew point temperature, and incoming solar and thermal radiation data. Sub-surface data included are hourly soil moisture data from multiple depths from 7 soil profiles within the catchment, and soil temperatures from multiple depths from 2 soil profiles. Hydrologic response data include hourly stream discharge from the catchment outlet weir, continuous snow depths from one location, intermittent snow depths from 5 locations, and snow depth and density data from ten weekly snow surveys. Though it represents only a single water year, the presentation of both above and below ground hydrologic condition makes it one of the most detailed and complete hydro-climatic datasets from the climatically sensitive rain-snow transition zone for a wide range of modeling and descriptive studies.

Palaeolake Rehwiese, NE-Germany, Younger Dryas varved data set RW09

The first 1400-year floating varve chronology for north-eastern Germany covering the late Allerød to the early Holocene has been established by microscopic varve counts from the Rehwiese palaeolake sediment record. The Laacher See Tephra (LST), at the base of the studied interval, forms the tephrochronological anchor point. The fine laminations were examined using a combination of micro-facies and ?-XRF analyses and are typical of calcite varves, which in this case provide mainly a warm season signal. Two varve types with different sub-layer structures have been distinguished: (I) complex varves consisting of up to four seasonal sub-layers formed during the Allerød and early Holocene periods, and, (II) simple two sub-layer type varves only occurring during the Younger Dryas. The precision of the chronology has been improved by varve-to-varve comparison of two independently analyzed sediment profiles based on well-defined micro-marker layers. This has enabled both (1) the precise location of single missing varves in one of the sediment profiles, and, (2) the verification of varve interpolation in disturbed varve intervals in the parallel core. Inter-annual and decadal-scale variability in sediment deposition processes were traced by multi-proxy data series including seasonal layer thickness, high-resolution element scans and total organic and inorganic carbon data at a five-varve resolution. These data support the idea of a two-phase Younger Dryas, with the first interval (12,675 - 12,275 varve years BP) characterised by a still significant but gradually decreasing warm-season calcite precipitation and a second phase (12,275 - 11,640 varve years BP) with only weak calcite precipitation. Detailed correlation of these two phases with the Meerfelder Maar record based on the LST isochrone and independent varve counts provides clues about regional differences and seasonal aspects of YD climate change along a transect from a location proximal to the North Atlantic in the west to a more continental site in the east.

Global Ocean Colour for Carbon Cycle Research (full product set)

In 2005, the International Ocean Colour Coordinating Group (IOCCG) convened a working group to examine the state of the art in ocean colour data merging, which showed that the research techniques had matured sufficiently for creating long multi-sensor datasets (IOCCG, 2007). As a result, ESA initiated and funded the DUE GlobColour project (http://www.globcolour.info/) to develop a satellite based ocean colour data set to support global carbon-cycle research. It aims to satisfy the scientific requirement for a long (10+ year) time-series of consistently calibrated global ocean colour information with the best possible spatial coverage. This has been achieved by merging data from the three most capable sensors: SeaWiFS on GeoEye's Orbview-2 mission, MODIS on NASA's Aqua mission and MERIS on ESA's ENVISAT mission. In setting up the GlobColour project, three user organisations were invited to help. Their roles are to specify the detailed user requirements, act as a channel to the broader end user community and to provide feedback and assessment of the results. The International Ocean Carbon Coordination Project (IOCCP) based at UNESCO in Paris provides direct access to the carbon cycle modelling community's requirements and to the modellers themselves who will use the final products. The UK Met Office's National Centre for Ocean Forecasting (NCOF) in Exeter, UK, provides an understanding of the requirements of oceanography users, and the IOCCG bring their understanding of the global user needs and valuable advice on best practice within the ocean colour science community. The three year project kicked-off in November 2005 under the leadership of ACRI-ST (France). The first year was a feasibility demonstration phase that was successfully concluded at a user consultation workshop organised by the Laboratoire d'Océanographie de Villefranche, France, in December 2006. Error statistics and inter-sensor biases were quantified by comparison with insitu measurements from moored optical buoys and ship based campaigns, and used as an input to the merging. The second year was dedicated to the production of the time series. In total, more than 25 Tb of input (level 2) data have been ingested and 14 Tb of intermediate and output products created, with 4 Tb of data distributed to the user community. Quality control (QC) is provided through the Diagnostic Data Sets (DDS), which are extracted sub-areas covering locations of in-situ data collection or interesting oceanographic phenomena. This Full Product Set (FPS) covers global daily merged ocean colour products in the time period 1997-2006 and is also freely available for use by the worldwide science community at http://www.globcolour.info/data_access_full_prod_set.html. The GlobColour service distributes global daily, 8-day and monthly data sets at 4.6 km resolution for, chlorophyll-a concentration, normalised water-leaving radiances (412, 443, 490, 510, 531, 555 and 620 nm, 670, 681 and 709 nm), diffuse attenuation coefficient, coloured dissolved and detrital organic materials, total suspended matter or particulate backscattering coefficient, turbidity index, cloud fraction and quality indicators. Error statistics from the initial sensor characterisation are used as an input to the merging methods and propagate through the merging process to provide error estimates for the output merged products. These error estimates are a key component of GlobColour as they are invaluable to the users; particularly the modellers who need them in order to assimilate the ocean colour data into ocean simulations. An intensive phase of validation has been undertaken to assess the quality of the data set. In addition, inter-comparisons between the different merged datasets will help in further refining the techniques used. Both the final products and the quality assessment were presented at a second user consultation in Oslo on 20-22 November 2007 organised by the Norwegian Institute for Water Research (NIVA); presentations are available on the GlobColour WWW site. On request of the ESA Technical Officer for the GlobColour project, the FPS data set was mirrored in the PANGAEA data library.

The Pangenome of the Plant-Selected Rhizobium leguminosarum bv viciae Sub-popuations

Rhizobium leguminosarum bv viciae (Rlv) is a bacterium able to establish effective symbioses with four different legume genera: Pisum, Lens, Lathyrus and Vicia. Classic studies using trap plants have previously shown that, given a choice, different plants prefer specific genotypes of rhizobia, which are adapted to the host (1, 2). In previous work we have performed a Pool-Seq analysis bases on pooled DNA samples from Rlv nodule isolates obtained from Pisum sativum, Lens culinaris, Vicia fava and V. sativa plants, used as rhizobial traps. This experiment allowed us to test the host preference hypothesis: different plant hosts select specific sub-populations of rhizobia from the available population present in a given soil. We have observed that plant-selected sub-populations are different at the single nucleotide polymorphism (SNP) level. We have selected individual isolates from each sub-population (9 fava-bean isolates, 14 pea isolates 9 vetch isolates and 9 lentil isolates) and sequenced their genomes at draft level (ca. 30x, 90 contigs). Genomic analyses have been carried out using J-species and CMG-Biotools. All the isolates had similar genome size (7.5 Mb) and number of genes (7,300). The resulting Average Nucleotide Identity (ANIm) tree showed that Rhizobium leguminosarum bv viciae is a highly diverse group. Each plant-selected subpopulation showed a closed pangenome and core genomes of similar size (11,500 and 4,800 genes, respectively). The addition of all four sub-population results in a larger, closed pangenome of 19,040 genes and a core genome of similar size (4,392 genes). Each sub-population contains a characteristic set of genes but no universal, plant-specific genes were found. The core genome obtained from all four sub-populations is probably a representative core genome for Rhizobium leguminosarum, given that the reference genome (Rhizobium leguminosarum bv. viciae strain 3841) contains most of the core genome. We have also analyzed the symbiotic cluster (nod), and different nod cluster genotypes were found in each sub-population. Supported by MINECO (Consolider-Ingenio 2010, MICROGEN Project, CSD2009-00006).

Within-country ethnic differences and product positioning:a comparison of the perceptions of two British sub-cultures

While cross-cultural consumer behaviour and its impact on marketing strategies has received considerable interest within the marketing literature, differences between ethnic groups within countries have received significantly less attention. This study examines the effect of within-country ethnic differences on brand positioning, using the UK automobile industry as a context. Both qualitative and quantitative research is used to identify the perceptions of two sub-cultural groups: British of Indian extraction, and Caucasian British. It was found that these two groups display appreciably different values, and also place different levels of importance on different product attributes when evaluating brands. Furthermore, the two groups exhibited different perceptions of the same set of brands. The results suggest that, to position brands effectively, marketers should take account of cultural diversity within countries as well as between them.

Combining algorithms to predict bacterial protein sub-cellular location:parallel versus concurrent implementations

We describe a novel and potentially important tool for candidate subunit vaccine selection through in silico reverse-vaccinology. A set of Bayesian networks able to make individual predictions for specific subcellular locations is implemented in three pipelines with different architectures: a parallel implementation with a confidence level-based decision engine and two serial implementations with a hierarchical decision structure, one initially rooted by prediction between membrane types and another rooted by soluble versus membrane prediction. The parallel pipeline outperformed the serial pipeline, but took twice as long to execute. The soluble-rooted serial pipeline outperformed the membrane-rooted predictor. Assessment using genomic test sets was more equivocal, as many more predictions are made by the parallel pipeline, yet the serial pipeline identifies 22 more of the 74 proteins of known location.

Leaf morphology scales multi-annual trends in nutrient cycling and leaf, flower, and fruiting phenology among species in the sub-tropical hardwood forests of the northern Florida Keys

The subtropical hardwood forests of southern Florida are formed by 120 frost-sensitive, broadleaved angiosperm species that range throughout the Caribbean. Previous work on a series of small sized forest component patches of a 20 km2, forest preserve in northern Key Largo indicate that a shift in species composition was associated with a 100 year forest developmental sequence, and this shift was associated with an increasingly evergreen canopy. This document investigates the underlying differences of the biology of trees that live in this habitat, and is specifically focused on the impact of leaf morphology on changing nutrient cycling patterns. Measurements of the area, thickness, dry mass, nutrient content and longevity of several leaves from 3-4 individuals of ten species were conducted in combination with a two-year leaf litter collection and nutrient analysis to determine that species with thicker, denser leaves cycled scarce nutrients up to 2-3 times more efficiently than thin leaved tree species, and the leaf thickness/density index predicts role in forest development in a parallel direction as the index predicts nutrient cycling efficiency. A three year set of observations on the relative abundance of new leaves, flowers and fruits of the same tree species provides an opportunity to evaluate the consequences the leaf morphology/nutrient cycling/forest development relationship to forest habitat quality. Results of the three documents support a mechanistic link between forest development and nutrient cycling, and suggests that older forests are likely to be better habitats based on the availability of valuable forest products like new leaves, flowers, and fruits throughout the year.

A sub-kiloparsec scale view of star formation in M31

Thesis (Ph.D.)--University of Washington, 2016-08

Atmospheric calibration for sub-millimeter radio astronomy

This thesis is focused on improving the calibration accuracy of sub-millimeter astronomical observations. The wavelength range covered by observational radio astronomy has been extended to sub-millimeter and far infrared with the advancement of receiver technology in recent years. Sub-millimeter observations carried out with airborne and ground-based telescopes typically suffer from 10% to 90% attenuation of the astronomical source signals by the terrestrial atmosphere. The amount of attenuation can be derived from the measured brightness of the atmospheric emission. In order to do this, the knowledge of the atmospheric temperature and chemical composition, as well as the frequency-dependent optical depth at each place along the line of sight is required. The altitude-dependent air temperature and composition are estimated using a parametrized static atmospheric model, which is described in Chapter 2, because direct measurements are technically and financially infeasible. The frequency dependent optical depth of the atmosphere is computed with a radiative transfer model based on the theories of quantum mechanics and, in addition, some empirical formulae. The choice, application, and improvement of third party radiative transfer models are discussed in Chapter 3. The application of the calibration procedure, which is described in Chapter 4, to the astronomical data observed with the SubMillimeter Array Receiver for Two Frequencies (SMART), and the German REceiver for Astronomy at Terahertz Frequencies (GREAT), is presented in Chapters 5 and 6. The brightnesses of atmospheric emission were fitted consistently to the simultaneous multi-band observation data from GREAT at 1.2 ∼ 1.4 and 1.8 ∼ 1.9 THz with a single set of parameters of the static atmospheric model. On the other hand, the cause of the inconsistency between the model parameters fitted from the 490 and 810 GHz data of SMART is found to be the lack of calibration of the effective cold load temperature. Besides the correctness of atmospheric modeling, the stability of the receiver is also important to achieving optimal calibration accuracy. The stabilities of SMART and GREAT are analyzed with a special calibration procedure, namely the “load calibration". The effects of the drift and fluctuation of the receiver gain and noise temperature on calibration accuracy are discussed in Chapters 5 and 6. Alternative observing strategies are proposed to combat receiver instability. The methods and conclusions presented in this thesis are applicable to the atmospheric calibration of sub-millimeter astronomical observations up to at least 4.7 THz (the H channel frequency of GREAT) for observations carried out from ∼ 4 to 14 km altitude. The procedures for receiver gain calibration and stability test are applicable to other instruments using the same calibration approach as that for SMART and GREAT. The structure of the high performance, modular, and extensible calibration program used and further developed for this thesis work is presented in the Appendix C.