Derived Bedrock Elevations, Strain Rates and Stresses from Measured Surface Elevations and Velocities - Jakobshavns-Isbrae, Greenland

Jakobshavns Isbrae (69 degrees 10'N, 49 degrees 5'W) drains about 6.5% of the Greenland ice sheet and is the fastest ice stream known. The Jakobshavns Isbrae basin of about 10 000 km(2) was mapped photogrammetrically from four sets of aerial photography, two taken in July 1985 and two in July 1986. Positions and elevations of several hundred natural features on the ice surface were determined for each epoch by photogrammetric block-aerial triangulation, and surface velocity vectors were computed from the positions. The two flights in 1985 yielded the best results and provided most common points (716) for velocity determinations and are therefore used in the modeling studies. The data from these irregularly spaced points were used to calculate ice elevations and velocity vectors at uniformly spaced grid paints 3 km apart by interpolation. The field of surface strain rates was then calculated from these gridded data and used to compute the field of surface deviatoric stresses, using the flow law of ice, for rectilinear coordinates, X, Y pointing eastward and northward. and curvilinear coordinates, L, T pointing longitudinally and transversely to the changing ice-flow direction. Ice-surface elevations and slopes were then used to calculate ice thicknesses and the fraction of the ice velocity due to basal sliding. Our calculated ice thicknesses are in fair agreement with an ice-thickness map based on seismic sounding and supplied to us by K. Echelmeyer. Ice thicknesses were subtracted from measured ice-surface elevations to map bed topography. Our calculation shows that basal sliding is significant only in the 10-15 km before Jakobshavns Isbrae becomes afloat in Jakobshavns IsfJord.

Model of interactive visualization of diffusion processes from different strains, and source routes and spatial diffusion of capuchin monkeys over the past 6 million years

Source routes and Spatial Diffusion of capuchin monkeys over the past 6 million years, rebuilt in the SPREAD 1.0.6 from the MCC tree. The map shows the 10 different regions to which distinctive samples were associated. The different transmission routes have been calculated from the average rate over time. Only rates with Bayes factor> 3 were considered as significantly different from zero. Significant diffusion pathways are highlighted with color varying from dark brown to red, being the dark brown less significant rates and deep red the most significant rates.

Simulation of Temperatures and Stresses during Construction of a RCC Dam

Se describen las variaciones de temperaturas y de tensiones durante la construcción de presas de hormigón compactado. The curing of concrete is an exothermic process. The heat of hydration generated induces temperature increases in the concrete, which will disappear in the long term by heat conduction in the concrete mass and thermal exchanges with the environment. The problem is of particularly interest for large concrete masses, as is the case of dams, because the time involved in the heat diffusion process grows with the square of the dimensions and a hotter dam interior implies the possibility of cracking the exposed surfaces of the dam. The Cuira dam, currently being built in Venezuela using roller compacted concrete, is a 134 m high, arch-gravity dam. In support of the design, different strategies were analysed, including various combinations of cooling of the water and the aggregate in order to achieve acceptable results. The calculations were conducted with Abaqus, taking into account all the necessary mechanical and thermal characteristics, as well as the relevant non-linearities. The analyses led to the conclusion that no cooling was required, even taking into account the stress state imposed by an early and rapid filling of the reservoir.

Evolutionary genomics of Staphylococcus aureus: Insights into the origin of methicillin-resistant strains and the toxic shock syndrome epidemic

An emerging theme in medical microbiology is that extensive variation exists in gene content among strains of many pathogenic bacterial species. However, this topic has not been investigated on a genome scale with strains recovered from patients with well-defined clinical conditions. Staphylococcus aureus is a major human pathogen and also causes economically important infections in cows and sheep. A DNA microarray representing >90% of the S. aureus genome was used to characterize genomic diversity, evolutionary relationships, and virulence gene distribution among 36 strains of divergent clonal lineages, including methicillin-resistant strains and organisms causing toxic shock syndrome. Genetic variation in S. aureus is very extensive, with ≈22% of the genome comprised of dispensable genetic material. Eighteen large regions of difference were identified, and 10 of these regions have genes that encode putative virulence factors or proteins mediating antibiotic resistance. We find that lateral gene transfer has played a fundamental role in the evolution of S. aureus. The mec gene has been horizontally transferred into distinct S. aureus chromosomal backgrounds at least five times, demonstrating that methicillin-resistant strains have evolved multiple independent times, rather than from a single ancestral strain. This finding resolves a long-standing controversy in S. aureus research. The epidemic of toxic shock syndrome that occurred in the 1970s was caused by a change in the host environment, rather than rapid geographic dissemination of a new hypervirulent strain. DNA microarray analysis of large samples of clinically characterized strains provides broad insights into evolution, pathogenesis, and disease emergence.

Presenting Flex-anal charts; a new and modern treatise for design of piping for flexibility

Mode of access: Internet.

The graphic method by influence lines for bridge and roof computations,

Mode of access: Internet.

A theory for the effect of mean stress on fatigue of metals under combined torsion and axial load or bending.

"Department of Army Project no. 5B99-01-004, Ordnance R and D Project no. TB2-0001, Office of Ordnance Research Project no. 1348, Contract no. DA-19-020-ORD-3250."

Working stresses for structural design.

Cover title.

Airplane design; a textbook of airplane layout and stress analysis calculations with particular emphasis on economics of design.

"First three editions comprising 2400 copies were published between Dec. 1934 and June 1939."

Axial tension and bending interaction curves for members loaded inelastically,

Mode of access: Internet.

A theory of the non-linear influence of normal stress on fatigue under combined stresses,

Contract no. DA-19-020-ORD-3520."

Discontinuity stresses in metallic pressure vessels.

Cover title.

The bantams down-to-date. A detailed description of the colors, types, standard points and weights of all the exhibition bantams; how to mate for the production of all breeds and varieties of game and "variety" bantams; inbreeding, double mating, the founding of strains and the creation of new species; housing, feeding, hatching; fitting for exhibition and general management; simplified doctoring of sick bantams.

Mode of access: Internet.

Theory of flow and fracture of solids

Mode of access: Internet.

Airplane design; a textbook of airplane layout and stress analysis calculations with examples and problems.

"Complementary to ... ʻTechnical aerodynamics' by the same author."--Pref.