A strategy for sensitivity and specificity enhancements in prostate specific antigen-[alpha] 1-antichymotrypsin detection based on surface plasmon resonance

A biochip based on surface plasmon resonance was fabricated to detect prostate specific antigen-a1-antichymotrypsin (PSA-ACT complex) in both HBS buffer and human serum. To reduce non-specific binding and steric hindrance effect, the chemical surface of the sensor chips was constructed by using various oligo(ethylene glycol) mixtures of different molar ratios of HS(CH2)11(OCH2CH2)6OCH2COOH and HS(CH2)11(OCH2CH2)3OH. The self-assembled monolayers were biotinylated to facilitate the immobilization of streptavidin. Using the chip surfaces, PSA-ACT complex in HBS buffer and human serum was detected at 20.7 and 47.5 ng/ml by primary immunoresponse, respectively. However, the limit of detection could be simply enhanced by a sandwich strategy to improve the sensitivity and specificity of the immunoassay. An intact PSA polyclonal antibody was used as an amplifying agent in the strategy. As a result, PSA-ACT complex concentrations as low as 10.2 and 18.1 ng/ml were found in the HBS buffer and human serum sample, respectively. The result indicates that this approach could satisfy our goal without modifying the secondary interactant.

Exploring molecular recognition pathways in one- and two-component gels formed by dendritic lysine-based gelators

This paper provides an integrated overview of the factors which control gelation in a family of dendritic gelators based on lysine building blocks. In particular, we establish that higher generation systems are more effective gelators, amide linkages in the dendron are better than carbamates, and long alkyl chain surface groups and a carboxylic acid at the focal point enhance gelation. The gels are best formed in relatively low polarity solvents with no hydrogen bond donor ability and limited hydrogen bond acceptor capacity. The dendrons with acid groups at the focal point can form two component gels with diaminododecane, and in this case, it is the lower generation dendrons which can avoid steric hindrance and form more effective gels. The stereochemistry of lysine is crucial in self-assembly, with opposite enantiomers disrupting each other's molecular recognition pathways. For the two-component system, stoichiometry is key, if too much diamine is present, dendron-stabilised microcrystals of the diamine begin to form. Interestingly, gelation still occurs in this case, and the systems with amides/alkyl chains are more effective gels, as a consequence of enhanced dendron-dendron intermolecular interactions allowing the microcrystals to form an interconnected network.

Metallosupramolecular Materials for Electronic Applications: Molecular Boolean Computation

It is an exciting era for molecular computation because molecular logic gates are being pushed in new directions. The use of sulfur rather than the commonplace nitrogen as the key receptor atom in metal ion sensors is one of these directions; plant cells coming within the jurisdiction of fluorescent molecular thermometers is another, combining photochromism with voltammetry for molecular electronics is yet another. Two-input logic gates benefit from old ideas such as rectifying bilayer electrodes, cyclodextrin-enhanced room-temperature phosphorescence, steric hindrance, the polymerase chain reaction, charge transfer absorption of donor–acceptor complexes and lectin–glycocluster interactions. Furthermore, the concept of photo-uncaging enables rational ways of concatenating logic gates. Computational concepts are also applied to potential cancer theranostics and to the selective monitoring of neurotransmitters in situ. Higher numbers of inputs are also accommodated with the concept of functional integration of gates, where complex input–output patterns are sought out and analysed. Molecular emulation of computational components such as demultiplexers and parity generators/checkers are achieved in related ways. Complexity of another order is tackled with molecular edge detection routines.

Novos derivados porfirínicos: síntese e potenciais aplicações em PDT

O trabalho apresentado nesta dissertação descreve estudos desenvolvidos segundo três metodologias para a funcionalização de meso-tetra-arilporfirinas; uma delas baseada na funcionalização com diazo compostos, outra na reacção de Suzuki-Miyaura e a terceira na reacção de metátese. O presente documento é composto por quatro partes distintas. Na primeira parte são feitas considerações gerais sobre propriedades e aplicações de macrociclos porfirínicos. Na segunda parte é apresentado o trabalho realizado na funcionalização de porfirinas com diazo compostos através de reacções de inserção com um catalisador de ródio(II). Este estudo envolveu a preparação de duas porfirinas com grupos O-H e N-H nas posições para dum substituinte meso-fenilo. Os estudos iniciaram-se com a reacção de 5-(4-hidroxifenil)-10,15,20-trifenilporfirinatozinco(II) com diazoacetato de etilo na presença de Rh2(OAc)4. Obteve-se o produto esperado de inserção com bons rendimentos. A reacção de 5-(4-aminofenil)- 10,15,20-trifenilporfirinatozinco(II) com esse diazo composto na presença de Rh2(OAc)4 mostrou um perfil diferente do da reacção com o outro porfirinato. Foram obtidos três produtos, a saber: produto de bis-inserção e dois outros contendo o grupo funcional amida. Este capítulo descreve ainda a síntese de glicoporfirinas e de glicoclorinas através de reacções de inserção e de ciclopropanação envolvendo, respectivamente, os complexos 5-(4-hidroxifenil)- 10,15,20-trifenilporfirinatozinco(II) e 5,10,15,20- tetraquis(pentafluorofenil)porfirinatozinco(II) com α-diazoacetatos com substituintes sacarídicos. Foram usados, como catalisadores, Rh2(OAc)4 e CuCl, respectivamente, na reacção de inserção e na de ciclopropanação. Tendo em vista a sua aplicação em PDT, os novos produtos foram descomplexados e a unidade glicosídica foi desprotegida. Estudos de geração de oxigénio singuleto mostraram que os compostos obtidos são bons geradores dessa espécie citotóxica. Foram também realizados estudos de avaliação da actividade fotodinâmica em células humanas tumorais HeLa e em células humanas saudáveis HaCaT. Estudos de viabilidade celular, após tratamento fotodinâmico, mostraram que as glicoclorinas são mais eficazes na fotoinactivação das células tumorais. Apenas o derivado da clorina com a unidade de galactose mostrou selectividade para a linha celular tumoral, inibindo o crescimento desta e não causando efeito significativo na linha celular saudável. Este fotossensibilizador não foi tóxico na ausência de luz e depois do tratamento fotodinâmico e em condições sub-letais, provocou vacuolização citoplasmática e retracção pronunciada nas células tumorais, enquanto que nas células saudáveis os danos sofridos foram escassos. Nos estudos de localização celular este fotossensibilizador localizou-se na membrana citoplasmática e nos lisossomas tanto nas células HeLa como nas HaCaT. Na terceira parte deste trabalho são descritos os resultados obtidos nos estudos de funcionalização de porfirinas através da reacção de Suzuki-Miyaura. O complexo 2-(4,4,5,5,-tetrametil-1,3,2-dioxaborolan-2-il)-5,10,15,20- tetrafenilporfirinatozinco(II) foi o composto escolhido como reagente de partida. Usando a reacção de Suzuki foi possível sintetizar complexos β-bromoarilporfirínicos em bons rendimentos. Estes complexos foram sujeitos à reacção de Suzuki com pinacolborano, tendo sido possível obter os produtos de acoplamento esperados e ainda derivados diméricos de complexos porfirínicos ligados por unidades fenileno. Esta metodologia reacional, catalisada por paládio, permitiu ainda sintetizar novos derivados quinolona-porfirina através da reacção do complexo porfirínico β-borilado anteriormente referido com bromo-quinolonas Nsubstiuídas com grupos alquílicos e glicosídicos. Deste modo foram obtidos derivados quinolona-porfirina em bons rendimentos. Com vista a realizar estudos de potencial aplicação em PACT, foram hidrolisados os grupos éster da unidade de quinolona e clivados os grupos protectores das unidades glicosídicas desses derivados. No estudo por MS Tandem (MS/MS) foi possível verificar que os isómeros dos derivados quinolona-porfirina sofrem as mesmas vias de fragmentação, confirmando as suas estruturas análogas. Foi possível ainda distinguir os derivados em que a unidade de porfirina está ligada à quinolona através da posição C-6 da quinolona daqueles em que a unidade de porfirina está ligada à quinolona através da sua posição C-7. Os estudos de geração de oxigénio singuleto mostraram que as porfirinas β- substituídas com unidades de quinolona são melhores geradoras desta espécie citotóxica do que a tetrafenilporfirina e que a eficiência que têm em gerar essa espécie é afectada pela posição da ligação entre a porfirina e a quinolona, assim como com o tipo do N-substituinte da quinolona. As bases livres dos conjugados quinolona-porfirinatos foram testadas como fotossensibilizadores em PACT em células do parasita Leishmania Braziliensis, tendo-se observado que estes compostos têm capacidade para fotoinactivar este parasita. Na quarta parte deste trabalho são descritos os resultados dos estudos de funcionalização de porfirinas através da reacção de metátese com catalisador de Grubbs, visando a obtenção de novos macrociclos com grupos triazolilo. Verificouse que a eficiência da reacção de metátese cruzada entre 2-vinil-5,10,15,20- tetrafenilporfirinatozinco(II) e 4-vinil-1,2,3-triazóis N-substituídos dependia das condições reaccionais e do triazol usado em cada caso. Foi possível ainda concluir que o impedimento estéreo das espécies envolvidas é um dos responsáveis pelo ciclo catalítico prosseguir por uma via secundária, originando uma espécie de ruténio pouco eficiente como catalisador. Este estudo foi estendido à reacção dos 4-vinil-1,2,3-triazois seleccionados com 2-butadienil-5,10,15,20- tetrafenilporfirinatoniquel(II); em cada caso foi possível obter uma mistura de isómeros dos derivados triazol-porfirina, geralmente em maiores rendimentos globais do que na reacção com 2-vinil-5,10,15,20-tetrafenilporfirinatozinco(II). Este facto será indicativo de que a reacção de metátase com esse derivado porfirínico segue, predominantemente, a via mais eficiente.

Structure-inhibition relationship of phenylethanoid glycosides on angiotensin-converting enzyme using ultra-performance liquid chromatography-tandem quadrupole mass spectrometry

Angiotensin-converting enzyme (ACE) plays a critical role in rennin-angiotensin system. Recently, natural products isolated from herbal medicines revealed inhibitory effects against ACE which suggested their potential activities in regulating blood pressure. In this study, ACE inhibition (ACEI) of 21 phenylethanoid glycosides and related phenolic compounds were investigated by measuring the production of HA a rapid, sensitive, accurate and specific ultra-performance liquid chromatography-tandem quadrupole mass spectrometry (UPLC-MS/MS) method. The test compounds showed different inhibitory potencies on ACE ranging from 5.29 to 95.01% at 50 mM, and the compounds with ACEI higher than 50% were selected for further IC50 determination. The IC50 values were from 0.53 ± 0.04 to 15.035 ± 0.036 mM. The structure-inhibition relationship were then explored and the result showed that cinnamoyl groups played an essential role in ACEI of phenylethanoid glycosides. Furthermore, the sub-structures of increasing ACEI for phenylethanoid glycosides is more hydroxyls and less steric hindrance to chelate the active site Zn2+ of ACE. In summary, our results suggested that phenylethanoid glycosides are a widely available source of anti-hypertensive natural products and the information provided from structure-inhibition relationship study could aid the design of structurally modified phenylethanoid glycosides as anti-hypertensive drugs.

A fast atom bombardment mass spectrometry study of tris (3, 6-dioxaheptyl) amine-alkali metal halide complexes and hydrogen bonded complexes

The objective of this thesis was to demonstrate the potential of fast atom bombardment mass spectrometry (FABMS) as a probe of condensed phase systems and its possible uses for the study of hydrogen bonding. FABMS was used to study three different systems. The first study was aimed at investigating the selectivity of the ligand tris(3,6-dioxaheptyl) amine (tdoha) for the alkali metal cations. FABMS results correlated well with infrared and nmr data. Systems where a crown ether competed with tdoha for a given alkali metal cation were also investigated by fast atom bombardment. The results were found to correlate with the cation affinity of tdoha and the ability of the crown ether to bind the cation. In the second and third studies, H-bonded systems were investigated. The imidazole-electron donor complexes were investigated and FABMS results showed the expected H-bond strength of the respective complexes. The effects of concentration, liquid matrix, water content, deuterium exchange, and pre-ionization of the complex were also investigated. In the third system investigated, the abundance of the diphenyl sulfone-ammonium salt complexes (presumably H-bonded) in the FABMS spectrum were found to correlate with qualitative considerations such as steric hindrance and strength of ion pairs.

Chelated fluoroboron cations : synthesis and multinuclear nmr studies

The preparation of chelated difluoroboron cations (DD)BF2+, where DD is a saturated polydentate tertiary-amine or polydentate aromatic ligand, has been systematically studied by using multinuclear solution and solid state nuclear magnetic resonance spectroscopy and fast atom bombardment mass spectrometry. Three new methods of synthesis of (DD)BF2+ cations are reported, and compared with the previous method of reacting a chelating donor with Et20.BF3. The methods most effective for aromatic donors such as 1,1O-phenanthroline are ineffective for saturated polydentate tertiary-amines like N,N,N' ,Nil ,Nil-pentamethyldiethylenetriamine. Polydentate tertiary-amine donors that form 5-membered rings upon bidentate chelation were found to chelate effectively when the BF2 source contained two leaving groups (a heavy halide and a Lewis base such as pyridine =pyr or isoxazole =ISOX), i.e., pyr.BF2X (X = CI or Br), ISOX.BF2X and (pyr)2BF2+. Those that would form 6membered rings upon chelation do not chelate by any of the four methods. Polydentate aromatic ligands chelate effectively when the BF2 source contained a weak Lewis base, e.g., ISOX.BF3, ISOX.BF2X and Et20.BF3. Bidentate chelation by polydentate tertiaryamine and aromatic donors leads to nmr parameters that are significantly different then their (D)2BF2+ relatives (D =monod~ntate t-amines or pyridines). The chelated haloboron cations (DD)BFCI+, and (DD)BFBr+ were generated from D.BFX2 adducts for all ligands that form BF2+ cations above. In addition, the (DD)BCI2+ and (DD)BBr2+ cations were formed from D.BX3 adducts by the chelating aromatic ligands, except for the aromatic ligand 1,8-bis(dimethylamino)naphthalene, which formed only the (DD)BF2+ cation, apparently due to its extreme steric hindrance. Chelation by a donor is a two-step reaction. For polydentate tertiary-amine ligands, the two rates appear to be very dependent on the two possible leaving groups on the central boron atom. The order of increasing ease of displacement for the donors was: pyr < Cl < Br < ISOX. The rate of chelation by polydentate aromatic ligands appears to be dependent on the displacement of the first ligand from the boron. The order of increasing ease of displacement for the donors was: pyr < CI < ISOX ~ Br < Et20.

NMR studies of the exchange reactions of CH3CN.BX3 with excess CH3CN /|nJoseph Fogelman. -- 260 St. Catharines, Ont. : [s. n.],

Exchange reactions between molecular complexes and excess acid or base are well known and have been extensively surveyed in the literature(l). Since the exchange mechanism will, in some way involve the breaking of the labile donor-acceptor bond, it follows that a discussion of the factors relating to bonding in molecular complexes will be relevant. In general, a strong Lewis base and a strong Lewis acid form a stable adduct provided that certain stereochemical requirements are met. A strong Lewis base has the following characteristics (1),(2) (i) high electron density at the donor site. (ii) a non-bonded electron pair which has a low ionization potential (iii) electron donating substituents at the donor atom site. (iv) facile approach of the site of the Lewis base to the acceptor site as dictated by the steric hindrance of the substituents. Examples of typical Lewis bases are ethers, nitriles, ketones, alcohols, amines and phosphines. For a strong Lewis acid, the following properties are important:( i) low electron density at the acceptor site. (ii) electron withdrawing substituents. (iii) substituents which do not interfere with the close approach of the Lewis base. (iv) availability of a vacant orbital capable of accepting the lone electron pair of the donor atom. Examples of Lewis acids are the group III and IV halides such (M=B, AI, Ga, In) and MX4 - (M=Si, Ge, Sn, Pb). The relative bond strengths of molecular complexes have been investigated by:- (i) (ii) (iii) (iv) (v] (vi) dipole moment measurements (3). shifts of the carbonyl peaks in the IIIR. (4) ,(5), (6) .. NMR chemical shift data (4),(7),(8),(9). D.V. and visible spectrophotometric shifts (10),(11). equilibrium constant data (12), (13). heats of dissociation and heats of reactions (l~), (16), (17), (18), (19). Many experiments have bben carried out on boron trihalides in order to determine their relative acid strengths. Using pyridine, nitrobenzene, acetonitrile and trimethylamine as reference Lewis bases, it was found that the acid strength varied in order:RBx3 > BC1 3 >BF 3 • For the acetonitrile-boron trihalide and trimethylamine boron trihalide complexes in nitrobenzene, an-NMR study (7) showed that the shift to lower field was. greatest for the BB~3 adduct ~n~ smallest for the BF 3 which is in agreement with the acid strengths. If electronegativities of the substituents were the only important effect, and since c~ Br ,one would expect the electron density at the boron nucleus to vary as BF3

Bis-and tris (amidine) fluoroboron cations and related systems studies by Multinuclear NMR and fast atom bombardment mass spectometry

The formation and the isolation of fluoroboron salts, (D2BF2+)(PF6-), (DD'BF2+)(PF6-) and (D3BF2+)(PF6-)2, have been carried out. 1,8-Diazabicyclo [5,4.0]undec-7-ene (DBU) and 1,5-diazabicyclo[4,3,O]non-5-ene (DBN), extremely strong organic bases, were introduced into the fluoroboron cation systems and induced a complicated redistribution reaction in the D/BF3/BC13 systems. The result was the formation of all BFnCI4-n-, D.BFnCI3-n and fluoroboron cation species which were detected by 19p and 11B NMR spectrometry. The displacement reaction of CI- from these D.BFnCI3-n (n = 1 and 2) species by the second entering ligand is much faster than in other nitrogen donor containing systems which have been previously studied. Tetramethylguanidine, oxazolines and thiazolines can also produce similar reactions in D/BF3/BCI3 systems, but no significant BFnC4-n- species were observed. As well as influences of their basicity and their steric hindrance, N=C-R(X) (X = N, 0 or S) and N=C( X)2 (X = N or S) structures of ligands have significant effects on the fonnationof fluoroboron cations and the related NMR parameters. D3BF2+ and some D2BF2+ show the expected inertness, but (DBU)2BF2+ shows an interestingly high reactivity. (D2BF2+)(X-) formed from weak organic bases such as pyridine can react with stronger organic bases and form DD'BF2+ and D'2BF2+ in acetone or nitromethane. Fast atom bombardment mass spectrometry is doubly meaningful to this work. Firstly, FABMS can be directly applied to the complicated fluoroboron cation containing solution systems as an excellent complementary technique to multinuclear NMR. Secondly, the gas-phase ion substitution reaction of (D2BF2+)(PF6-) with the strong organic bases is successfully observed in a FABMS ion source when the B-N bond is not too strong in these cations.

Photophysical Investigations of Thiophene Azomethine Derivatives

Une série de dimères composés de thiophène-aniline encombrée stériquement a été synthétisée. Les différents processus de désactivation de l’état singulet excité ont été étudiés par UV-visible, fluorescence, phosphorescence, photolyse par impulsion laser et calculs théoriques. Les graphiques de Stern-Volmer obtenus à partir des expériences de désactivation des états singulet et triplet ont démontré l’efficacité de l’azométhine à désactiver les fluorophores. Les calculs semi-empiriques AM1 examinant l’effet des substituants encombrés ont démontrés que les groupements tert-butyls sur l’aniline ont moins d’influence sur la barrière de rotation N-aryl que les substitutions alkyles en ont sur la rotation de thiophène-C. Les calculs Rehm-Weller basés sur les potentiels d’oxydation et de réduction ont montré que l’autodésactivation de l’état excité des azométhines se fait par transfert d’électron photoinduit menant à une éradication complète de la fluorescence. Des complexes métalliques contenant des ligands azométhines ont aussi été préparés. Le ligand est composé d’une unité hydroxyquinoline lié à un cycle thiophène. Les données photophysiques de ces complexes indiquent un déplacement bathochromique aussi bien en absorbance qu’en fluorescence. Des dispositifs de détection d’ion métallique ont été préparés et un exemple à partir d’une solution de cuivre a montré un déplacement bathochromique.

Synthèse totale du méthyl ester de la zincophorine et étude DFT du transfert d’hydrogène diastéréosélectif impliquant des intermédiaires radicalaires vicinaux à un ester

Cet ouvrage traite d’une méthodologie pour l’induction de centres stéréogènes au sein des motifs propionates par la chimie des radicaux et de son application à la synthèse totale du méthyl ester de la zincophorine. Cet ionophore, aux propriétés biologiques intéressantes, présente plusieurs défis synthétiques dont une séquence de type polypropionate anti, anti, anti, anti difficilement accessible ainsi qu’un tétrahydropyrane trans trisubstitué. Récemment, l’intérêt renouvelé pour ces composés polyéthers, en tant qu’agents anticancéreux, accentue l’importance de stratégies versatiles permettant l’accès à ces structures ainsi qu’à leurs analogues. Depuis quelques années, notre groupe s’intéresse à la synthèse d’unités propionates acycliques par une séquence réactionnelle contrôlée uniquement par le substrat. La première étape découle d’une aldolisation de Mukaiyama entre un aldéhyde alpha-chiral et un énoxysilane tétrasubstitué portant une liaison carbone-halogène, et où l’issue stéréochimique dépend de la nature monodentate ou bidentate de l’acide de Lewis employé. La seconde réaction-clé implique la formation d’un radical tertiaire, vicinal à un ester, pouvant être réduit diastéréosélectivement en présence d’hydrure d’étain. La première section décrit l’élaboration de motifs tétrahydropyranes trisubstitués et l’induction des centres stéréogènes vicinaux par une réduction radicalaire. Nous avons révélé que l’issue diastéréosélective de la réaction de cyclisation par une iodoéthérification était dictée par le groupement gamma-méthyle des esters alpha,beta-insaturés de départ. Nous avons ensuite démontré que les produits de la réaction radicalaire anti et syn pouvaient être obtenus sélectivement à partir d’un intermédiaire commun, respectivement en prenant appui sur l’effet exocyclique ou endocyclique lors de la réduction. Par une stratégie complémentaire, nous avons révélé que le précurseur radicalaire pouvait également être obtenu par une réaction de cycloéthérification en présence d’un énoxysilane tétrasubstitué. Une étude systématique des substituants du cycle a révélé que certaines relations stéréochimiques conduisaient à une perte de sélectivité au détriment du produit anti. La seconde section concerne l’étude DFT au niveau BHandHLYP/TZVP des intermédiaires radicalaires impliqués lors du transfert d’hydrogène. Par une étude de décomposition de l’énergie d’activation, nous avons été en mesure de rationaliser l’issue diastéréosélective de la réaction sur la base des énergies de distorsion (∆Ed‡) et d’interaction (∆Eint‡) requises pour accéder à la paire d’états de transition pro-anti et pro-syn. De plus, nous avons démontré qu’une analyse NBO permettait de relativiser l’impact des interactions stéréoélectroniques. Par la suite, l’évaluation des intermédiaires radicalaires borinates et aluminates nous a permis de révéler que l’encombrement stérique de la chaîne propionate était la cause principale de la formation sélective des produits anti ou syn lors d’une réduction en présence d’un acide de Lewis. La dernière section décrit l’élaboration de la séquence polypropionate de la zincophorine, et de ses isomères, à partir du fragment tétrahydropyrane substitué. Au cours de notre étude, nous avons identifié que le nombre de sites de chélation potentiels devait être limité à trois lors de l’aldolisation en condition Cram-chélate. De plus, nous avons démontré que les différents motifs acétates sont accessibles sélectivement par l’utilisation d’un énoxysilane encombré. Par ailleurs, nous avons révélé qu’une même séquence réactionnelle pouvait être employée pour la synthèse du fragment C17–C25 de son analogue naturel CP-78,545, et avons complété la plus récente synthèse totale du méthyl ester de la zincophorine.

La tagatose-1,6-bisphosphate aldolase et la fructose-1,6-bisphosphate aldolase de classe I : mécanisme et stéréospécificité

La tagatose-1,6-biphosphate aldolase de Streptococcus pyogenes est une aldolase qui fait preuve d'un remarquable manque de spécificité vis à vis de ses substrats. En effet, elle catalyse le clivage réversible du tagatose-1,6-bisphosphate (TBP), mais également du fructose-1,6-bisphosphate (FBP), du sorbose-1,6-bisphosphate et du psicose-1,6-bisphosphate, quatre stéréoisomères, en dihydroxyacétone phosphate (DHAP) et en glycéraldéhyde-3-phosphate (G3P). Aldolase de classe I, qui donc catalyse sa réaction en formant un intermédiaire covalent obligatoire, ou base de Schiff, avec son susbtrat, la TBP aldolase de S. pyogenes partage 14 % d’identité avec l’enzyme modèle de cette famille, la FBP aldolase de muscle de mammifère. Bien que le mécanime catalytique de la FBP aldolase des mammifères ait été examiné en détails et qu’il soit approprié d’en tirer des renseignements quant à celui de la TBP aldolase, le manque singulier de stéréospécificité de cette dernière tant dans le sens du clivage que celui de la condensation n’est toujours pas éclairci. Afin de mettre à jour les caractéristiques du mécanisme enzymatique, une étude structurale de la TBP aldolase de S. pyogenes, un pathogène humain extrêmement versatile, a été entreprise. Elle a permis la résolution des structures de l’enzyme native et mutée, en complexe avec des subtrats et des inhibiteurs compétitifs, à des résolutions comprises entre 1.8 Å et 2.5 Å. Le trempage des cristaux de TBP aldolase native et mutante dans une solution saturante de FBP ou TBP a en outre permis de piéger un authentique intermédiaire covalent lié à la Lys205, la lysine catalytique. La determination des profils pH de la TBP aldolase native et mutée, entreprise afin d'évaluer l’influence du pH sur la réaction de clivage du FBP et TBP et ìdentifier le(s) résidu(s) impliqué(s), en conjonction avec les données structurales apportées par la cristallographie, ont permis d’identifier sans équivoque Glu163 comme résidu responsable du clivage. En effet, le mode de liaison sensiblement différent des ligands utilisés selon la stéréochimie en leur C3 et C4 permet à Glu163, équivalent à Glu187 dans la FBP aldolase de classe I, d’abstraire le proton sur l’hydroxyle du C4 et ainsi d’amorcer le clivage du lien C3-C4. L’étude du mécanimse inverse, celui de la condensation, grâce par exemple à la structure de l’enzyme native en complexe avec ses substrats à trois carbones le DHAP et le G3P, a en outre permis d’identifier un isomérisme du substrat G3P comme possible cause de la synthèse des isomères en C4 par cette enzyme. Ce résultat, ainsi que la decouverte d’un possible isomérisme cis-trans autour du lien C2-C3 de la base de Schiff formée avec le DHAP, identifié précedemment, permet de cerner presque complètement les particularités du mécanisme de cette enzyme et d’expliquer comment elle est capable de synthétiser les quatres stéréoisomères 3(S/R), 4(S/R). De plus, la résolution de ces structures a permis de mettre en évidence trois régions très mobiles de la protéine, ce qui pourrait être relié au rôle postulé de son isozyme chez S. pyogenes dans la régulation de l’expression génétique et de la virulence de la bactérie. Enfin, la résolution de la structure du mutant Lys229→Met de la FBP aldolase de muscle en complexe avec la forme cyclique du FBP, de même que des études cristallographiques sur le mutant équivalent Lys205→Met de la TBP aldolase de S. pyogenes et des expériences de calorimétrie ont permis d’identifier deux résidus particuliers, Ala31 et Asp33 chez la FBP aldolase, comme possible cause de la discrimination de cette enzyme contre les substrats 3(R) et 4(S), et ce par encombrement stérique des substrats cycliques. La cristallographie par rayons X et la cinétique enzymatique ont ainsi permis d'avancer dans l'élucidation du mécanisme et des propriétés structurales de cette enzyme aux caractéristiques particulières.

Rhodium(I) catalyzed [2+2+2] cycloaddition reactions: experimental and theoretical studies

The [2+2+2] cycloaddition reaction involves the formation of three carbon-carbon bonds in one single step using alkynes, alkenes, nitriles, carbonyls and other unsaturated reagents as reactants. This is one of the most elegant methods for the construction of polycyclic aromatic compounds and heteroaromatic, which have important academic and industrial uses. The thesis is divided into ten chapters including six related publications. The first study based on the Wilkinson’s catalyst, RhCl(PPh3)3, compares the reaction mechanism of the [2+2+2] cycloaddition process of acetylene with the cycloaddition obtained for the model of the complex, RhCl(PH3)3. In an attempt to reduce computational costs in DFT studies, this research project aimed to substitute PPh3 ligands for PH3, despite the electronic and steric effects produced by PPh3 ligands being significantly different to those created by PH3 ones. In this first study, detailed theoretical calculations were performed to determine the reaction mechanism of the two complexes. Despite some differences being detected, it was found that modelling PPh3 by PH3 in the catalyst helps to reduce the computational cost significantly while at the same time providing qualitatively acceptable results. Taking into account the results obtained in this earlier study, the model of the Wilkinson’s catalyst, RhCl(PH3)3, was applied to study different [2+2+2] cycloaddition reactions with unsaturated systems conducted in the laboratory. Our research group found that in the case of totally closed systems, specifically 15- and 25-membered azamacrocycles can afford benzenic compounds, except in the case of 20-membered azamacrocycle (20-MAA) which was inactive with the Wilkinson’s catalyst. In this study, theoretical calculations allowed to determine the origin of the different reactivity of the 20-MAA, where it was found that the activation barrier of the oxidative addition of two alkynes is higher than those obtained for the 15- and 25-membered macrocycles. This barrier was attributed primarily to the interaction energy, which corresponds to the energy that is released when the two deformed reagents interact in the transition state. The main factor that helped to provide an explanation to the different reactivity observed was that the 20-MAA had a more stable and delocalized HOMO orbital in the oxidative addition step. Moreover, we observed that the formation of a strained ten-membered ring during the cycloaddition of 20-MAA presents significant steric hindrance. Furthermore, in Chapter 5, an electrochemical study is presented in collaboration with Prof. Anny Jutand from Paris. This work allowed studying the main steps of the catalytic cycle of the [2+2+2] cycloaddition reaction between diynes with a monoalkyne. First kinetic data were obtained of the [2+2+2] cycloaddition process catalyzed by the Wilkinson’s catalyst, where it was observed that the rate-determining step of the reaction can change depending on the structure of the starting reagents. In the case of the [2+2+2] cycloaddition reaction involving two alkynes and one alkene in the same molecule (enediynes), it is well known that the oxidative coupling may occur between two alkynes giving the corresponding metallacyclopentadiene, or between one alkyne and the alkene affording the metallacyclopentene complex. Wilkinson’s model was used in DFT calculations to analyze the different factors that may influence in the reaction mechanism. Here it was observed that the cyclic enediynes always prefer the oxidative coupling between two alkynes moieties, while the acyclic cases have different preferences depending on the linker and the substituents used in the alkynes. Moreover, the Wilkinson’s model was used to explain the experimental results achieved in Chapter 7 where the [2+2+2] cycloaddition reaction of enediynes is studied varying the position of the double bond in the starting reagent. It was observed that enediynes type yne-ene-yne preferred the standard [2+2+2] cycloaddition reaction, while enediynes type yne-yne-ene suffered β-hydride elimination followed a reductive elimination of Wilkinson’s catalyst giving cyclohexadiene compounds, which are isomers from those that would be obtained through standard [2+2+2] cycloaddition reactions. Finally, the last chapter of this thesis is based on the use of DFT calculations to determine the reaction mechanism when the macrocycles are treated with transition metals that are inactive to the [2+2+2] cycloaddition reaction, but which are thermally active leading to new polycyclic compounds. Thus, a domino process was described combining an ene reaction and a Diels-Alder cycloaddition.

Enhanced phosphopeptide isolation by Fe(III)-IMAC using 1,1,1,3,3,3-hexafluoroisopropanol

IMAC can be used to selectively enrich phosphopeptides from complex peptide mixtures, but co-retention of acidic peptides together with the failure to retain some phosphopeptides restricts the general utility of the method. In this study Fe(III)-IMAC was qualitatively and quantitatively assessed using a panel of phosphopeptides, both synthetic and derived from proteolysis of known phosphoproteins, to identify the causes of success and failure in the application of this technique. Here we demonstrate that, as expected, peptides with a more acidic amino acid content are generally more efficiently purified and detected by MALDI-MS after Fe(III)-IMAC than those with a more basic content. Modulating the loading buffer used for Fe(III)-IMAC significantly affects phosphopeptide binding and suggests that conformational factors that lead to steric hindrance and reduced accessibility to the phosphate are important. The use of 1,1,1,3,3,3-hexafluoroisopropanol is shown here to significantly improve Fe(III)-IMAC enrichment and subsequent detection of phosphopeptides by MALDI-MS.