Structure of Raster in Melolonthine Larvae

Ultrastructural and electrophysiological investigations carried out on larval rasters of Rhopaea magnicomis Blackburn, Lepidiota frerzclzi Black, and Antitr-ogus consanguineus Blackburn revealed that the raster is a complex of mechanoreceptive setae. Chemical and morphological investigations provide no evidence that the raster is a site for chemical emissions; however, species differences in hydrocarbon profiles were found among larval cuticle samples. Ultrastructure of the setae (pali) show that each seta is innervated by a single dendrite which ends in a tubular body at the base of the seta. The connection with the seta is on the proximal side, which corresponds to the production of a phasic-tonic electrophysiological signal on downward deflection. The dendrite is surrounded by a granular, electron-dense sheath which has inwardly directed arms distally and outwardly directed arms proximally. Two sheath cells are present, 1 forming a large receptor lymph cavity which is lamellate and lined with electron-dense material.

Drag reduction by a forward facing aerospike for a large angle blunt cone in high enthalpy flows

Drag reduction studies are conducted using a flat disc tipped aerospike for a 120-degree apex angle blunt cone model in high enthalpy flows. Accelerometer based force balance is used for the drag force measurement in the newly established free piston driven shock tunnel, HST3. Drag reduction upto about 58 percent has been achieved for Mach 8 flow of 5 MJ/kg specific enthalpy at zero degree angle of attack.

Fungus-feeding Thysanoptera: Phlaeothripinae of the Idiothrips genus-group in Australia, with nine new species

In a group of fungus-feeding Phlaeothripinae characterized by complex body sculpture, identification keys are provided to three genera and 15 species from Australia, including nine new species. In the genus Azaleothrips one new species is described, and one Asian species is newly recorded from Australia. The genus Stictothrips is recorded from Australia for the first time, with two new species. Within the genus Strepterothrips considerable structural diversity is recorded including three new species in which antennal segment III is greatly reduced and bears no sense cones. Some species in this genus exhibit the unusual condition of having several setae on the pelta, the first abdominal tergite. Problems in the production of generic diagnoses within the Phlaeothripinae are discussed.

Evolution of the Neckeraceae (Bryophyta): resolving the backbone phylogeny

Earlier phylogenetic studies, including species belonging to the Neckeraceae, have indicated that this pleurocarpous moss family shares a strongly supported sister group relationship with the Lembophyllaceae, but the family delimitation of the former needs adjustment. To test the monophyly of the Neckeraceae, as well as to redefine the family circumscription and to pinpoint its phylogenetic position in a larger context, a phylogenetic study based on molecular data was carried out. Sequence data were compiled, combining data from all three genomes: nuclear ITS1 and 2, plastid trnS-rps4-trnT-trnL-trnF and rpl16, and mitochondrial nad5 intron. The Neckeraceae have sometimes been divided into the two families, Neckeraceae and Thamnobryaceae, a division rejected here. Both parsimony and Bayesian analyses of molecular data revealed that the family concept of the Neckeraceae needs several further adjustments, such as the exclusion of some individual species and smaller genera as well as the inclusion of the Leptodontaceae. Within the family three well-supported clades (A, B and C) can be distinguished. Members of clade A are mainly non-Asiatic and nontropical. Most species have a weak costa and immersed capsules with reduced peristomes (mainly Neckera spp.) and the teeth at the leaf margins are usually unicellular. Clade B members are also mainly non-Asiatic. They are typically fairly robust, distinctly stipilate, having a single, at least relatively strong costa, long setae (capsules exserted), and the peristomes are well developed or only somewhat reduced. Members of clade C are essentially Asiatic and tropical. The species of this clade usually have a strong costa and a long seta, the seta often being mammillose in its upper part. The peristome types in this clade are mixed, since both reduced and unreduced types are found. Several neckeraceous genera that were recognised on a morphological basis are polyphyletic (e.g. Neckera, Homalia, Thamnobryum, Porotrichum). Ancestral state reconstructions revealed that currently used diagnostic traits, such as the leaf asymmetry and costa strength are highly homoplastic. Similarly, the reconstructions revealed that the 'reduced' sporophyte features have evolved independently in each of the three clades.

Examination of Stress-Fields In Elastic Plastic Indentation

A block of high-purity copper was indented by a 120-degrees diamond-tipped cone. Strain gauges were placed on the surface to measure the radial strains at different surface locations, during loading as well as unloading. The competence of three stress fields proposed for elastic-plastic indentation is assessed by comparing the predicted surface radial strains with those experimentally observed.

Shock tunnel study of spiked aerodynamic bodies flying at hypersonic Mach numbers

A three-component accelerometer balance system is used to study the drag reduction effect of an aerodisc on large angle blunt cones flying at hypersonic Mach numbers. Measurements in a hypersonic shock tunnel at a freestream Mach number of 5.75 indicate more than 50% reduction in the drag coefficient for a 120degrees apex angle blunt cone with a forward facing aerospike having a flat faced aerodisc at moderate angles of attack. Enhancement of drag has been observed for higher angles of attack due to the impingement of the flow separation shock on the windward side of the cone. The flowfields around the large angle blunt cone with aerospike assembly flying at hypersonic Mach numbers are also simulated numerically using a commercial CFD code. The pressure and density levels on the model surface, which is under the aerodynamic shadow of the flat disc tipped spike, are found very low and a drag reduction of 64.34% has been deduced numerically.

Contact instabilities of anisotropic and inhomogeneous soft elastic films

Anisotropy plays important roles in various biological phenomena such as adhesion of geckos and grasshoppers enabled by the attachment pods having hierarchical structures like thin longitudinal setae connected with threads mimicked by anisotropic films. We study the contact instability of a transversely isotropic thin elastic film when it comes in contact proximity of another surface. In the present study we investigate the contact stability of a thin incompressible transversely isotropic film by performing linear stability analysis. Based on the linear stability analysis, we show that an approaching contactor renders the film unstable. The critical wavelength of the instability is a function of the total film thickness and the ratio of the Young's modulus in the longitudinal direction and the shear modulus in the plane containing the longitudinal axis. We also analyze the stability of a thin gradient film that is elastically inhomogeneous across its thickness. Compared to a homogeneous elastic film, it becomes unstable with a longer wavelength when the film becomes softer in going from the surface to the substrate.

Novel supersonic nozzles for mixing enhancement in supersonic ejectors

Two novel supersonic nozzles Tip Ring Supersonic Nozzle and Elliptic Sharp Tipped Shallow (ESTS) Lobed Nozzle have been developed to enhance mixing at high speeds which is beneficial to supersonic ejectors. A circular ring protruding at the exit of a conical nozzle forms the tip ring nozzle. The innovative ESTS lobed nozzle comprising of four elliptic lobes with sharp tips that do not protrude deep into the core supersonic flow is produced by a novel yet simple methodology. A comparative experimental study is conducted between a conical nozzle, an ESTS lobed nozzle and a tip ring nozzle with exit Mach number of 2.3. For the first time, the three dimensional flow structure from ESTS lobed nozzle and tip ring nozzle is revealed from laser scattering flow visualization experiments on the free jet. A doubling of jet spreading rate is observed in the ESTS lobed nozzle. When applied to a supersonic ejector, both nozzles achieve a 30% increase in entrainment of secondary flow. The loss of compression ratio is 15% for the ESTS lobed nozzle while it is 50% for the tip ring nozzle. Further, the behavior of wall static pressure profile corroborates mixing enhancement. (C) 2014 Elsevier Ltd. All rights reserved.

An Improved Energy Method For Determining Young'S Modulus By Instrumented Indentation Using A Berkovich Tip

We previously proposed a method for estimating Young's modulus from instrumented nanoindentation data based on a model assuming that the indenter had a spherical-capped Berkovich geometry to take account of the bluntness effect. The method is now further improved by releasing the constraint on the tip shape, allowing it to have a much broader arbitrariness to range from a conical-tipped shape to a flat-ended shape, whereas the spherical-capped shape is just a special case in between. This method requires two parameters to specify a tip geometry, namely, a volume bluntness ratio V-r and a height bluntness ratio h(r). A set of functional relationships correlating nominal hardness/reduced elastic modulus ratio (H-n/E-r) and elastic work/total work ratio (W-e/W) were established based on dimensional analysis and finite element simulations, with each relationship specified by a set of V-r and h(r). Young's modulus of an indented material can be estimated from these relationships. The method was shown to be valid when applied to S45C carbon steel and 6061 aluminum alloy.

Segurança na deglutição de pacientes disfágicos pós acidente vascular cerebral: contribuições do enfermeiro

Trata da temática do paciente portador de acidente vascular cerebral, especificamente das ações do enfermeiro para a prevenção das complicações decorrentes da disfagia após um acidente vascular cerebral no atendimento domiciliar. Objetivou-se propor ações de enfermagem que garantam uma deglutição segura em pacientes com disfagia pós-AVC a partir dos dados obtidos junto a pacientes usuários do SAD. Pesquisa desenvolvida no serviço de atendimento domiciliar de um hospital público do Rio de Janeiro com 30 sujeitos. Aplicou-se um instrumento, que descreveu dados sócio-laboriais, presença de disfagia e a consistência dos alimentos ingeridos pelos pacientes. Resultados: dezessete pacientes desenvolveram a disfagia, caracterizando-se como idosos, 76,47% foram do sexo feminino, a média de idade foi de 73,6 ( 9,55). A maioria com ensino fundamental completo (76,48%) e aposentados (70,59%). Todos são hipertensos e a metade diabéticos (58,82%). Com relação ao tipo de AVC, todos tiveram AVC isquêmico, sendo 58,82% um episódio e 41,18% dois episódios. A prevalência da disfagia é de 57%. Não há associação entre a idade e a disfagia e sua presença não dependeu da frequência de episódios de AVC. Pacientes com dois fatores de risco, hipertensão e diabetes apresentam maior prevalência de disfagia para líquidos do que para alimentos sólidos ou ambos. O enfermeiro deve realizar orientações em relação ao ambiente, posicionamento do paciente, aos materiais e utensílios a serem usados na alimentação, quantidade, temperatura e consistência do alimento. Informações como cabeceira elevada, colher de sobremesa para administração de dietas com volume de 3 a 5 ml, além do uso de espessantes para gerar uma consistência segura na deglutição, são fundamentais para garantir o mínimo de complicações. É importante também que a família participe de todo o processo de recuperação do paciente. Considerações finais: após o AVC, a disfagia merece atenção por gerar complicações como a aspiração e a pneumonia, o que serve para nortear o planejamento e orientações de enfermagem direcionadas a limitar o efeito dessa sequela, assim como a possibilidade de realização de pesquisas que tratem de conhecer o que os enfermeiros podem fazer no domicílio dos pacientes disfágicos de forma a melhorar o desempenho nas atividades diárias de vida.

Changes in egg production of the western rock lobster (Panulirus cygnus) associated with appendage damage

Data collected during fish-ery-independent sampling programs were used to examine the impact of appendage damage (indicated by lost or regenerated legs and antennae) on the reproductive output of female western rock lobster (Panulirus cygnus). Most of the damaged females sampled had one (53%), two (27%), or three (13%) appendages that had been lost or that were regenerating. Appendage damage was associated with the reduced probability of a female developing ovigerous setae; and if setae were produced, with the reduced probability that females would produce more than one batch of eggs within a season. These effects were more pronounced as the number of damaged appendages increased. From data collected in 2002, it was estimated that the total number of eggs produced by mature females caught in the fishery was significantly reduced (P<0.001) by 3–9% when the impact of appendage damage was included.

Larval development of the sidestriped shrimp (Pandalopsis dispar Rathbun) (Crustacea, Decapoda, Pandalidae) reared in the laboratory

Larval development of the sidestriped shrimp (Pandalopsis dispar) is described from larvae reared in the laboratory. The species has five zoeal stages and one postlarval stage. Complete larval morphological characteristics of the species are described and compared with those of related species of the genus. The number of setae on the margin of the telson in the first and second stages is variable: 11+12, 12+12, or 11+11. Of these, 11+12 pairs are most common. The present study confirms that what was termed the fifth stage in the original study done by Berkeley in 1930 was the sixth stage and that the fifth stage in the Berkeley’s study is comparable to the sixth stage that is described in the present study. The sixth stage has a segmented inner flagellum of the antennule and fully developed pleopods with setae. The ability to distinguish larval stages of P. dispar from larval stages of other plankton can be important for studies of the effect of climate change on marine communities in the Northeast Pacific and for marine resource management strategies.

Larval development of a semi terrestrial mangrove sesarmine crab Chasmagnathus convexus (Crustacea: Decapoda: Brachyura: Grapsidae) reared in laboratory

Four zoeal stages and one megalopal stage were identified in laboratory reared semiterrestrial mangrove sesarmine crab Chasmagnathus convexus. At an average salinity and temperature of 20±1% and 19.2±0.2°C, the megalopa was attained 24 days after hatching. Morphologically, the first zoae of C. convexz1s is very similar to those of other species of the genus Chasmagnathus as well as species of the genus Helice, in that view all share the following characteristics: lateral spine on the carapace, three pairs of setae on the posterior margin of the telson furca, one plus five setae on the endopod of the maxillule, and two plus two setae on the endopod of the maxilla. The differences between the first zoea and megalopa of and those of its congeners are discussed.

Methods of harvesting and preservation of the diatom Chaetoceros calcitrans

Diatom culture and larval feeding experiments were conducted to test the viability and acceptability of preserved algal concentrates. C. calcitrans is characterised by the presence of setae which keep them suspended in cultures and make autoflocculation very difficult. Flocculation was induced by the addition of a floc-forming chemical. Using the optimum conditions, it was possible to harvest the algae within 1-h settling time and with about 84% recovery. The viability of frozen Chaetoceros was determined by actual cell reproduction. Preliminary feeding experiments showed that Chaetoceros can be successfully used as a substitute for fresh diatoms as feed for Penaeus monodon larvae. Simple freezing techniques, with or without the use of protectants has been found convenient for preserving algal concentrates in small volumes for both feeding and culture purposes.

Winglets for Improved Aerothermal Performance of High Pressure Turbines

This paper investigates the design of winglet tips for unshrouded high pressure turbine rotors, considering aerodynamic and thermal performance simultaneously. A novel parameterization method has been developed to alter the tip geometry of a rotor blade. A design survey of un-cooled, flat-tipped winglets is performed using RANS calculations for a single rotor at engine representative operating conditions. Compared to a plain tip, large efficiency gains can be realized by employing an overhang around the full perimeter of the blade, but the overall heat load rises significantly. By employing an overhang on only the early suction surface, significant efficiency improvements can be obtained without increasing the overall heat transfer to the blade. The flow physics are explored in detail to explain the results. For a plain tip, the leakage and passage vortices interact to create a three-dimensional impingement onto the blade suction surface, causing high heat transfer. The addition of an overhang on the early suction surface displaces the tip leakage vortex away from the blade, weakening the impingement effect and reducing the heat transfer on the blade. The winglets reduce the aerodynamic losses by unloading the tip section, reducing the leakage flow rate, turning the leakage flow in a more streamwise direction and reducing the interaction between the leakage fluid and endwall flows. Generally these effects are most effective close to the leading edge of the tip, where the leakage flow is subsonic.