Novel properties of melanins include promotion of DNA strand breaks, impairment of repair, and reduced ability to damage DNA after quenching of singlet oxygen

Melanins have been associated with the development of melanoma and its resistance to photodynamic therapy (PDT). Singlet molecular oxygen (102), which is produced by ultraviolet A solar radiation and the PDT system, is also involved. Here, we investigated the effects that these factors have on DNA damage and repair. Our results show that both types of melanin (eumelanin and pheomelanin) lead to DNA breakage in the absence of light irradiation and that eumelanin is more harmful than pheomelanin. Interestingly, melanins were found to bind to the minor grooves of DNA, guaranteeing close proximity to DNA and potentially causing the observed high levels of strand breaks. We also show that the interaction of melanins with DNA can impair the access of repair enzymes to lesions, contributing to the perpetuation of DNA damage. Moreover, we found that after melanins interact with 102, they exhibit a lower ability to induce DNA breakage; we propose that these effects are due to modifications of their structure. Together, our data highlight the different modes of action of the two types of melanin. Our results may have profound implications for cellular redox homeostasis, under conditions of induced melanin synthesis and irradiation with solar light. These results may also be applied to the development of protocols to sensitize melanoma cells to PDT. (c) 2012 Elsevier Inc. All rights reserved.

Bedeutung endogener und exogener Quellen reaktiver Sauerstoffspezies für die Entstehung des malignen Melanoms

Bedeutung endogener und exogener Quellen reaktiver Sauerstoffspezies für die Entstehung des malignen Melanoms Um zu überprüfen, ob reaktive Sauerstoffspezies (ROS) an der Entstehung des malignen Melanoms ursächlich beteiligt sind, wurde in dieser Arbeit der Einfluss von Mitochondrien als endogener und Licht als exogener ROS-Quelle untersucht.Nach Bestrahlung mit Licht (Halogenlampe 1000 W, 1125 kJ/m² zwischen 400-800 nm) reagierten M8,99-Melanomzellen sensitiver mit der Bildung oxidativer DNA-Basenmodifikationen als Hautfibroblasten des gleichen Melanompatienten. In einer anderen Melanomzelle (M2/02) war ein klarer Reparaturdefekt oxidativer DNA-Schäden zu beobachten. Bei viermaliger Bestrahlung mit Licht im Abstand von zwei Stunden (je 450 k/m²) nahm die Zahl induzierter oxidativer DNA-Modifikationen und Mikrokerne stetig zu. Durch Mehrfachbestrahlung mit Kantenfilter (? > 395 nm) konnte gezeigt werden, dass ein Teil der Mikrokerne im Bereich sichtbaren Lichts entsteht. Mitochondrien könnten als endogene Hauptquelle für ROS an der Entstehung oxidativer DNA-Modifikationen und des malignen Melanoms beteiligt sein. Die Abwesenheit der mitochondrialen Atmungskette bewirkte in dieser Arbeit eine nachhaltige Abnahme der intrazellulären ROS-Bildung bzw. ihre Stimulation durch mitochondriale Gifte eine starke Zunahme. Da in beiden Fällen kein Effekt auf die Zahl der oxidativen DNA-Modifikationen zu beobachten war, kann die mitochondriale ROS-Produktion nicht auf diesem Weg zur Melanom-Entstehung beitragen.

Untersuchungen zum Mechanismus der zellulären und zellfreien DNA-Schädigung durch photosensibilisierende Arzneistoffe

Einige Arzneistoffe verursachen unter dem Einfluss von Sonnenlichtstrahlung folgenschwere Hautveränderungen. In der Arbeit wurden für sechs Photosensibilisatoren erstmals „Fingerabdrücke“ des zellfreien und zellulären photoinduzierten DNA Schadens in Form von Schadensprofilen erstellt. Untersucht wurden das Phenothiazin Chlorpromazin, sowie dessen Derivate 2-Hydroxypromazin, Chlorpromazinsulfoxid und Promazin; die Fluorchinolone Ciprofloxacin und Lomefloxacin; sowie Doxycyclin und Methylenblau unter Bestrahlung mit künstlich erzeugtem Sonnenlicht. Neben Strangbrüchen in der DNA konnten durch den Einsatz von spezifischen DNA-Reparaturendonukleasen als Sonden die Mengen an oxidativen Purinmodifikationen, oxidative Pyrimidinmodifikationen und abasische Stellen bestimmt werden. Durch Verwendung von modulierenden Zusätzen wurde die Beteiligung von reaktiven Sauerstoffspezies überprüft. Besonders bei den Phenothiazinen zeigten sich Besonderheiten hinsichtlich der DNA-Schädigung. Promazin induziert unter Photoaktivierung, vermutlich über einen reduktiven Angriff an der DNA, eine hohe Anzahl sonst selten beobachteter Läsionen, nämlich abasischen Stellen und Dihydropyrimidine. Photoaktiviertes Chlorpromazin konnte in Zellen unerwarteterweise wahrscheinlich über die Reaktion von Photolyseprodukten mit einem endogenen Chromophor sonnenlichtinduzierte oxidative DNA-Modifikationen verhindern. Eine Schädigung zellfreier DNA fand nur statt, wenn der Photosensibilisator im Überschuss gegenüber den DNA-Basenpaaren vorlag, vermutlich weil ansonsten die Photolyse des Chlorpromazins durch Interkalation in die DNA verhindert wurde. Fluorchinolone zeigten eine starke Generierung von DNA-Strangbrüchen in Zellen, welche möglicherweise auf photoinduzierte Reaktionen der Arzneistoffe mit der eukaryotischen Topoisomerase zurückzuführen ist. Die Korrelation der gemessenen DNA-Schäden mit der Mikrokerninduktion führte zu der Annahme, dass besonders abasische Stellen bei der Entstehung von Mikrokernen eine Rolle spielen könnten.

Photovoltaics from discotic liquid crystalline HBCs & poly(2,7-carbazole)s

In this study, the use of the discotic liquid crystalline HBCs and conjugated polymers based on 2,7-carbazole were investigated in detail as donor materials in organic bulk-heterojunction solar cells. It has been shown that they perform efficiently in photovoltaic devices in combination with suitable acceptors. The efficiency was found to depend strongly dependent on the morphology of the film. By investigation of a series of donor materials with similar molecular structures based on both discotic molecules and conjugated polymers, a structure-performance relation was established, which is not only instructive for these materials but also serves as a guideline for improved molecular design. For the series of HBCs used in this study, it is found that the device efficiency decreases with increasing length of the alkyl substituents in the HBC. Thus, the derivative with the smallest alkyl mantle, being more crystalline compared to the HBCs with longer alkyl chains, gave the highest EQE of 12%. A large interfacial separation was found in the blend of HBC-C6,2 and PDI, since the crystallization of the acceptor occurred in a solid matrix of HBC. This led to small dispersed organized domains and benefited the charge transport. In contrast, blends of HBC-C10,6/PDI or HBC-C14,10/PDI revealed a rather homogeneous film limiting the percolation pathways due to a mixed phase. For the first time, poly(2,7-carbazole) was incorporated as a donor material in solar cells using PDI as an electron acceptor. The good fit in orbital energy levels and absorption spectra led to high efficiency. This result indicates that conjugated polymers with high band-gap can also be applied as materials to build efficient solar cells if appropriate electron acceptors are chosen. In order to enhance the light absorption ability, new ladder-type polymers based on pentaphenylene and hexaphenylene with one and three nitrogen bridges per repeat unit have been synthesized and characterized. The polymer 2 with three nitrogen bridges showed more red-shifted absorbance and emission and better packing in the solid-state than the analogous polymer 3 with only one nitrogen bridge per monomer unit. An overall efficiency as high as 1.3% under solar light was obtained for the device based on 1 and PDI, compared with 0.7% for the PCz based device. Therefore, the device performance correlates to a large extent with the solar light absorption ability and the lateral distance between conjugated polymer chains. Since the lateral distance is determined by the length and number of attached alkyl side chains, it is possible to assume that these substituents insulate the charge carrier pathways and decrease the device performance. As an additional consequence, the active semiconductor is diluted in the insulating matrix leading to a lower light absorption. This work suggests ways to improve device performance by molecular design, viz. maintaining the HOMO level while bathochromically shifting the absorption by adopting a more rigid ladder-type structure. Also, a high ratio of nitrogen bridges with small alkyl substituents was a desirable feature both in terms of adjusting the absorption and maintaining a low lateral inter-chain separation, which was necessary for obtaining high current and efficiency values.

Selective photo-oxidation of cellobiose with tio2-supported metal nanoparticles

Upgrade of biomass to valuable chemicals is a central topic in modern research due to the high availability and low price of this feedstock. For the difficulties in biomass treatment, different pathways are still under investigation. A promising way is in the photodegradation, because it can lead to greener transformation processes with the use of solar light as a renewable resource. The aim of my work was the research of a photocatalyst for the hydrolysis of cellobiose under visible irradiation. Cellobiose was selected because it is a model molecule for biomass depolymerisation studies. Different titania crystalline structures were studied to find the most active phase. Furthermore, to enhance the absorption of this semiconductor in the visible range, noble metal nanoparticles were immobilized on titania. Gold and silver were chosen because they present a Surface Plasmon Resonance band and they are active metals in several photocatalytic reactions. The immobilized catalysts were synthesized following different methods to optimize the synthetic steps and to achieve better performances. For the same purpose the alloying effect between gold and silver nanoparticles was examined.

Selective photo-oxidation of glucose

Biomass transformation into high-value chemicals has attracted attention according to the “green chemistry” principles. Low price and high availability make biomass one of the most interesting renewable resources as it provides the means to create sustainable alternatives to the oil-derived building blocks of the chemical industry In recent year, the need for alternative environmentally friendly routes to drive chemical reactions has in photocatalytic processes an interesting way to obtain valuable chemicals from various sources using the solar light as energy source. The purpose of this work was to use supported noble metal nanoparticles in the selective photo-oxidation of glucose through using visible light. Glucose was chosen as model molecule because it is the cheapest and the most common monosaccharide. Few studies about glucose photo oxidation have been conducted so far, and reaction mechanism is still not totally explained. The aim of this work was to systematically analyze and assess the impact of several parameters (eg. catalyst/substrate ratio, reaction time, effect of the solvent and light source) on the reaction pathway and to monitor the product distribution in order to draw a general reaction scheme for the photo oxidation of glucose under visible light. This study regards the reaction mechanism and the influence of several parameters, such as solvent, light power and substrate concentration. Furthermore, the work focuses on the influence of gold and silver nanoparticles and on the influence of metal loading. The glucose oxidation was monitored through the mass balance and the products selectivity. Reactions were evaluated in terms of glucose conversion, mass balance and selectivities towards arabinose and gluconic acid. In conclusion, this study is able to demonstrate that the photo oxidation of glucose under visible light is feasible; the full identification of the main products allows, for the first time, a comprehensive reaction mechanism scheme.

Successful pacing using a batteryless sunlight-powered pacemaker.

AIMS Today's cardiac pacemakers are powered by batteries with limited energy capacity. As the battery's lifetime ends, the pacemaker needs to be replaced. This surgical re-intervention is costly and bears the risk of complications. Thus, a pacemaker without primary batteries is desirable. The goal of this study was to test whether transcutaneous solar light could power a pacemaker. METHODS AND RESULTS We used a three-step approach to investigate the feasibility of sunlight-powered cardiac pacing. First, the harvestable power was estimated. Theoretically, a subcutaneously implanted 1 cm(2) solar module may harvest ∼2500 µW from sunlight (3 mm implantation depth). Secondly, ex vivo measurements were performed with solar cells placed under pig skin flaps exposed to a solar simulator and real sunlight. Ex vivo measurements under real sunlight resulted in a median output power of 4941 µW/cm(2) [interquartile range (IQR) 3767-5598 µW/cm(2), median skin flap thickness 3.0 mm (IQR 2.7-3.3 mm)]. The output power strongly depended on implantation depth (ρSpearman = -0.86, P < 0.001). Finally, a batteryless single-chamber pacemaker powered by a 3.24 cm(2) solar module was implanted in vivo in a pig to measure output power and to pace. In vivo measurements showed a median output power of >3500 µW/cm(2) (skin flap thickness 2.8-3.84 mm). Successful batteryless VVI pacing using a subcutaneously implanted solar module was performed. CONCLUSION Based on our results, we estimate that a few minutes of direct sunlight (irradiating an implanted solar module) allow powering a pacemaker for 24 h using a suitable energy storage. Thus, powering a pacemaker by sunlight is feasible and may be an alternative energy supply for tomorrow's pacemakers.