Change-Impact driven Agile Architecting.

Software architecture is a key factor to scale up Agile Software Development ASD in large softwareintensive systems. Currently, software architectures are more often approached through mechanisms that enable to incrementally design and evolve software architectures aka. agile architecting. Agile architecting should be a light-weight decision-making process, which could be achieved by providing knowledge to assist agile architects in reasoning about changes. This paper presents the novel solution of using change-impact knowledge as the main driver for agile architecting. The solution consists of a Change Impact Analysis technique and a set of models to assist agile architects in the change -decision-making- process by retrieving the change-impact architectural knowledge resulting from adding or changing features iteration after iteration. To validate our approach, we have put our solution into practice by running a project of a metering management system in electric power networks in an i-smart software factory.

Heavyweight extensions to the UML metamodel to describe the C3 architectural style

UML is widely accepted as the standard for representing the various software artifacts generated by a development process. For this reason, there have been attempts to use this language to represent the software architecture of systems as well. Unfortunately, these attempts have ended in the same representations (boxes and lines) already criticized by the software architecture community.In this work we propose an extension to the UML metamodel that is able to represent the syntactics and semantics of the C3 architectural style. This style is derived from C2. The modifications to define C3 are described in section 4. This proposal is innovative regarding UML extensions for software architectures, since previous proposals where based on light extensions to the UML meta-model, while we propose a heavyweight extension of the metamodel. On the other hand, this proposal is less ambitious than previous proposals, since we do not want to represent in UML any architectural style, but only one: C3.

Reviewing technical approaches for sharing and preservation of experimental data

Empirical Software Engineering (ESE) replication researchers need to store and manipulate experimental data for several purposes, in particular analysis and reporting. Current research needs call for sharing and preservation of experimental data as well. In a previous work, we analyzed Replication Data Management (RDM) needs. A novel concept, called Experimental Ecosystem, was proposed to solve current deficiencies in RDMapproaches. The empirical ecosystem provides replication researchers with a common framework that integrates transparently local heterogeneous data sources. A typical situation where the Empirical Ecosystem is applicable, is when several members of a research group, or several research groups collaborating together, need to share and access each other experimental results. However, to be able to apply the Empirical Ecosystem concept and deliver all promised benefits, it is necessary to analyze the software architectures and tools that can properly support it.

A systematic mapping study on testing technique experiments: has the situation changed since 2000?

Context: Empirical Software Engineering (ESE) replication researchers need to store and manipulate experimental data for several purposes, in particular analysis and reporting. Current research needs call for sharing and preservation of experimental data as well. In a previous work, we analyzed Replication Data Management (RDM) needs. A novel concept, called Experimental Ecosystem, was proposed to solve current deficiencies in RDM approaches. The empirical ecosystem provides replication researchers with a common framework that integrates transparently local heterogeneous data sources. A typical situation where the Empirical Ecosystem is applicable, is when several members of a research group, or several research groups collaborating together, need to share and access each other experimental results. However, to be able to apply the Empirical Ecosystem concept and deliver all promised benefits, it is necessary to analyze the software architectures and tools that can properly support it.

Desarrollo de una aplicación para la escalada y oferta de servicios web

El autor de este proyecto es miembro reciente de la asociación SoloBoulder, dedicada a la modalidad de escalada boulder, noticias y actualidad, contenido multimedia, promoción de un equipo de escaladores y defensa de valores medioambientales en la montaña. El principal canal de distribución de contenidos es una página web existente previa a este proyecto. La asociación ha detectado una escasez y mala calidad de recursos en internet en cuanto a guías de zonas donde poder practicar el boulder. Tal circunstancia impulsa la iniciativa de este proyecto fin de carrera. El objetivo general es el desarrollo de una nueva aplicación que proporcione a los usuarios a nivel mundial una guía interactiva de boulder y otros puntos de interés, una red social que permita la creación cooperativa y orgánica de contenido, y servicios web para el consumo de la información desde otras plataformas u organizaciones. El nuevo software desarrollado es independiente de la página web de SoloBoulder previa. No obstante, ambas partes se integran bajo el mismo domino web y aspecto. La nueva aplicación ofrece a escaladores y turistas un servicio informativo e interactivo de calidad, con el que se espera aumentar el número de visitas en todo el sitio web y poder ampliar la difusión de valores medioambientales, diversificar las zonas de boulder y regular las masificadas, favorecer el deporte y brindar al escalador una oportunidad de autopromoción personal. Una gran motivación para el autor también es el proceso de investigación y formación en tecnologías, patrones arquitecturales de diseño y metodologías de trabajo adaptadas a las tendencias actuales en la ingeniería de software, con especial curiosidad hacia el mundo web. A este respecto podemos destacar: metodología de trabajo en proyectos, análisis de proyectos, arquitecturas de software, diseño de software, bases de datos, programación y buenas prácticas, seguridad, interfaz gráfica web, diseño gráfico, Web Performance Optimization, Search Engine Optimization, etc. En resumen, este proyecto constituye un aprendizaje y puesta en práctica de diversos conocimientos adquiridos durante la ejecución del mismo, así como afianzamiento de materias estudiadas en la carrera. Además, el producto desarrollado ofrece un servicio de calidad a los usuarios y favorece el deporte y la autopromoción del escalador. ABSTRACT. The author of this Project is recent member of the association SoloBoulder, dedicated to a rock climbing discipline called bouldering, news, multimedia content, promotion of a team of climbers and defense of environmental values in the mountain. The main content distribution channel is a web page existing previous to this project. The association has detected scarcity and bad quality of resources on the internet about guides of bouldering areas. This circumstance motivates the initiative of this project. The general objective is the development of a new application which provides a worldwide, interactive bouldering guide, including other points of interest, a social network which allows the cooperative and organic creation of content, and web services for consumption of information from other platforms or organizations. The new software developed is independent of the previous SoloBoulder web page. However, both parts are integrated under the same domain and appearance. The new application offers to climbers and tourists a quality informative and interactive service, with which we hope to increase the number of visits in the whole web site and be able to expand the dissemination of environmental values, diversify boulder areas and regulate the overcrowded ones, encourage sport and offer to the climber an opportunity of self-promotion. A strong motivation for the author is also the process of investigation and education in technologies, architectural design patterns and working methodologies adapted to the actual trends in software engineering, with special curiosity about the web world. In this regard we could highlight: project working methodologies, project analysis, software architectures, software design, data bases, programming and good practices, security, graphic web interface, graphic design, Web Performance Optimization, Search Engine Optimization, etc. To sum up, this project constitutes learning and practice of diverse knowledge acquired during its execution, as well as consolidation of subjects studied in the degree. In addition, the product developed offers a quality service to the users and favors the sport and the selfpromotion of the climber.

Requirements-aware systems:a research agenda for RE for self-adaptive systems

Requirements are sensitive to the context in which the system-to-be must operate. Where such context is well-understood and is static or evolves slowly, existing RE techniques can be made to work well. Increasingly, however, development projects are being challenged to build systems to operate in contexts that are volatile over short periods in ways that are imperfectly understood. Such systems need to be able to adapt to new environmental contexts dynamically, but the contextual uncertainty that demands this self-adaptive ability makes it hard to formulate, validate and manage their requirements. Different contexts may demand different requirements trade-offs. Unanticipated contexts may even lead to entirely new requirements. To help counter this uncertainty, we argue that requirements for self-adaptive systems should be run-time entities that can be reasoned over in order to understand the extent to which they are being satisfied and to support adaptation decisions that can take advantage of the systems' self-adaptive machinery. We take our inspiration from the fact that explicit, abstract representations of software architectures used to be considered design-time-only entities but computational reflection showed that architectural concerns could be represented at run-time too, helping systems to dynamically reconfigure themselves according to changing context. We propose to use analogous mechanisms to achieve requirements reflection. In this paper we discuss the ideas that support requirements reflection as a means to articulate some of the outstanding research challenges.

Delimited Massively Parallel Algorithm Based on Rules Elimination for Application of Active Rules in Transition P Systems

In the field of Transition P systems implementation, it has been determined that it is very important to determine in advance how long takes evolution rules application in membranes. Moreover, to have time estimations of rules application in membranes makes possible to take important decisions related to hardware / software architectures design. The work presented here introduces an algorithm for applying active evolution rules in Transition P systems, which is based on active rules elimination. The algorithm complies the requisites of being nondeterministic, massively parallel, and what is more important, it is time delimited because it is only dependant on the number of membrane evolution rules.

Fast Linear Algorithm for Active Rules Application in Transition P Systems

Transition P systems are computational models based on basic features of biological membranes and the observation of biochemical processes. In these models, membrane contains objects multisets, which evolve according to given evolution rules. In the field of Transition P systems implementation, it has been detected the necessity to determine whichever time are going to take active evolution rules application in membranes. In addition, to have time estimations of rules application makes possible to take important decisions related to the hardware / software architectures design. In this paper we propose a new evolution rules application algorithm oriented towards the implementation of Transition P systems. The developed algorithm is sequential and, it has a linear order complexity in the number of evolution rules. Moreover, it obtains the smaller execution times, compared with the preceding algorithms. Therefore the algorithm is very appropriate for the implementation of Transition P systems in sequential devices.

Achieving Energy Saving through Proxying Applications on behalf of Idle Devices

Several studies in the past have revealed that network end user devices are left powered up 24/7 even when idle just for the sake of maintaining Internet connectivity. Network devices normally support low power states but are kept inactive due to their inability to maintain network connectivity. The Network Connectivity Proxy (NCP) has recently been proposed as an effective mechanism to impersonate network connectivity on behalf of high power devices and enable them to sleep when idle without losing network presence. The NCP can efficiently proxy basic networking protocol, however, proxying of Internet based applications have no absolute solution due to dynamic and non-predictable nature of the packets they are sending and receiving periodically. This paper proposes an approach for proxying Internet based applications and presents the basic software architectures and capabilities. Further, this paper also practically evaluates the proposed framework and analyzes expected energy savings achievable under-different realistic conditions.

Preface to Models@run.time 2016

The complexity of adapting software during runtime has spawned interest in how models can be used to validate, monitor and adapt runtime behaviour. The use of models during runtime extends the use of modeling techniques beyond the design and implementation phases. The goal of this workshop is to look at issues related to developing appropriate modeldriven approaches to managing and monitoring the execution of systems and, also, to allow the system to reason about itself. We aim to continue the discussion of research ideas and proposals from researchers who work in relevant areas such as MDE, software architectures, reflection, and autonomic and self-adaptive systems, and provide a 'state-of-the-art' research assessment expressed in terms of challenges and achievements.

Many-Core Architectures: Hardware-Software Optimization and Modeling Techniques

During the last few decades an unprecedented technological growth has been at the center of the embedded systems design paramount, with Moore’s Law being the leading factor of this trend. Today in fact an ever increasing number of cores can be integrated on the same die, marking the transition from state-of-the-art multi-core chips to the new many-core design paradigm. Despite the extraordinarily high computing power, the complexity of many-core chips opens the door to several challenges. As a result of the increased silicon density of modern Systems-on-a-Chip (SoC), the design space exploration needed to find the best design has exploded and hardware designers are in fact facing the problem of a huge design space. Virtual Platforms have always been used to enable hardware-software co-design, but today they are facing with the huge complexity of both hardware and software systems. In this thesis two different research works on Virtual Platforms are presented: the first one is intended for the hardware developer, to easily allow complex cycle accurate simulations of many-core SoCs. The second work exploits the parallel computing power of off-the-shelf General Purpose Graphics Processing Units (GPGPUs), with the goal of an increased simulation speed. The term Virtualization can be used in the context of many-core systems not only to refer to the aforementioned hardware emulation tools (Virtual Platforms), but also for two other main purposes: 1) to help the programmer to achieve the maximum possible performance of an application, by hiding the complexity of the underlying hardware. 2) to efficiently exploit the high parallel hardware of many-core chips in environments with multiple active Virtual Machines. This thesis is focused on virtualization techniques with the goal to mitigate, and overtake when possible, some of the challenges introduced by the many-core design paradigm.

Radiofrequency architectures and technologies for software defined radio

Six-port network is an interesting radiofrequency architecture with multiple possibilities. Since it was firstly introduced in the seventies as an alternative network analyzer, the six-port network has been used for many applications, such as homodyne receivers, radar systems, direction of arrival estimation, UWB (Ultra-Wide-Band), or MIMO (Multiple Input Multiple Output) systems. Currently, it is considered as a one of the best candidates to implement a Software Defined Radio (SDR). This thesis comprises an exhaustive study of this promising architecture, where its fundamentals and the state-of-the-art are also included. In addition, the design and development of a SDR 0.3-6 GHz six-port receiver prototype is presented in this thesis, which is implemented in conventional technology. The system is experimentally characterized and validated for RF signal demodulation with good performance. The analysis of the six-port architecture is complemented by a theoretical and experimental comparison with other radiofrequency architectures suitable for SDR. Some novel contributions are introduced in the present thesis. Such novelties are in the direction of the highly topical issues on six-port technique: development and optimization of real-time I-Q regeneration techniques for multiport networks; and search of new techniques and technologies to contribute to the miniaturization of the six-port architecture. In particular, the novel contributions of this thesis can be summarized as: - Introduction of a new real-time auto-calibration method for multiport receivers, particularly suitable for broadband designs and high data rate applications. - Introduction of a new direct baseband I-Q regeneration technique for five-port receivers. - Contribution to the miniaturization of six-port receivers by the use of the multilayer LTCC (Low Temperature Cofired Ceramic) technology. Implementation of a compact (30x30x1.25 mm) broadband (0.3-6 GHz) six-port receiver in LTTC technology. The results and conclusions derived from this thesis have been satisfactory, and quite fruitful in terms of publications. A total of fourteen works have been published, considering international journals and conferences, and national conferences. Aditionally, a paper has been submitted to an internationally recognized journal, which is currently under review.