Slow m=1 instabilities of softened gravity Keplerian discs

We present the simplest model that permits a largely analytical exploration of the m =1 counter-rotating instability in a `hot' nearly Keplerian disc of collisionless self-gravitating matter. The model consists of a two-component softened gravity disc, whose linear modes are analysed using the Wentzel-Kramers-Brillouin approximation. The modes are slow in the sense that their (complex) frequency is smaller than the Keplerian orbital frequency by a factor which is of order the ratio of the disc mass to the mass of the central object. Very simple analytical expressions are derived for the precession frequencies and growth rates of local modes; it is shown that a nearly Keplerian discm must be unrealistically hot to avoid an overstability. Global modes are constructed for the case of zero net rotation.

Slow rotation of a sphere in a non-Newtonian fluid with or without suction or injection

The flow generated by the rotation of a sphere in an infinitely extending fluid has recently been studied by Goldshtik. The corresponding problem for non-Newtonian Reiner-Rivlin fluids has been studied by Datta. Bhatnagar and Rajeswari have studied the secondary flow between two concentric spheres rotating about an axis in the non-Newtonian fluids. This last investigation was further generalised by Rajeswari to include the effects of small radial suction or injection. In Part A of the present investigation, we have studied the secondary flow generated by the slow rotation of a single sphere in non-Newtonian fluid obeying the Rivlin-Ericksen constitutive equation. In Part B, the effects of small suction or injection have been studied which is applied in an arbitrary direction at the surface of the sphere. In the absence of suction or injection, the secondary flow for small values of the visco-elastic parameter is similar to that of Newtonian fluids with inclusion of inertia terms in the Oseen approximation. If this parameter exceeds Kc = 18R/219, whereR is the Reynolds number, the breaking of the flow field takes place into two domains, in one of which the stream lines form closed loops. For still higher values of this parameter, the complete reversal of the sense of the flow takes place. When suction or injection is included, the breaking of the flow persists under certain condition investigated in this paper. When this condition is broken, the breaking of the flow is obliterated.

Analysis of Ridge-Loaded Folded-Waveguide Slow-Wave Structures for Broadband Traveling-Wave Tubes

An E-plane serpentine folded-waveguide slow-wave structure with ridge loading on one of its broad walls is proposed for broadband traveling-wave tubes (TWTs) and studied using a simple quasi-transverse-electromagnetic analysis for the dispersion and interaction impedance characteristics, including the effects of the beam-hole discontinuity. The results are validated against cold test measurements, an approximate transmission-line parametric analysis, an equivalent circuit analysis, and 3-D electromagnetic modeling using CST Microwave Studio. The effect of the structure parameters on widening the bandwidth of a TWT is also studied.

The ratio of diffusion coefficient to mobility for slow electrons in dry air

Using Huxley's solution of the diffusion equation for electron-attaching gases, the ratio of diffusion coefficient D to mobility μ for electrons in dry air was measured over the range 3·06 × 10-17

Voittoa tavoittelemattoman organisaation brandin rakentaminen. Case Slow Food

Tämän pro gradu-tutkielman tavoitteena oli kartoittaa voittoa tavoittelemattoman Slow Food-organisaation brandiin liitettyjä mielikuvia ja niitä tekijöitä, joilla brandin tavoitekuvaa tulisi jatkossa rakentaa. Koska nykyisin brandi ei ole enää pelkkien liikeyritysten yksityisomaisuutta, tutkimuksen teoreettinen asemointi perustui yhtäältä organisaation tunnettuuden kasvattamiseen brandin rakentamisen avulla ja toisaalta voittoa tavoittelemattoman toimintaympäristön erityispiirteiden näkökulmaan. Case-osion avulla haluttiin tarkastella globalisaation ja elintarviketalouden keskittymiselle vaihtoehtoisen, paikallisuuteen perustuvan ruokajärjestelmän vaikutuksia, mahdollisuuksia ja haasteita. Tutkimuksen empiirinen osuus muodostui laadullisesta tapaustutkimuksesta, jonka kohteena oli Slow Food-organisaatio. Tutkimus suoritettiin haastattelemalla kahtatoista Slow Food-organisaation sidosryhmien edustajaa Italian Piemontessa henkilökohtaisin haastatteluin, joiden pohjana oli brandi identiteetin elementeistä luodut kaksi teemaa: mielleyhtymiin ja arvoväittämään liittyvät tekijät. Aineiston analysoinnissa käytettiin teemoittelua ja sisällönanalyysia. Tutkimuksen lähestymistapa oli abduktiivinen. Tulosten mukaan Slow Food-brandi identifioituu sidosryhmilleen ensisijaisesti luotettavan ruoan kautta, johon katsottiin kuuluvan aidot, puhtaat raaka-aineet ja paikallisesti tuotetun ja jalostamattoman ruoan hyvä jäljitettävyys. Myös tiettyyn paikkaan ja arvoihin sidottujen kokemusten ja odostusten täyttymisen kautta saatu sosiaalinen ja kulttuurinen jatkuvuus nimettiin brandin vahvuudeksi. Lisäksi vastuullisen tuottamisen ja kuluttamisen sekä aitojen makujen ja laadukkaan ruokavalion edistäminen korostuivat jonkin verran vastauksissa. Näillä perusvahvuuksilla toivottiin brandin identiteettiä rakennettavan myös tulevaisuudessa. Haastateltavien mielestä Slow Food-organisaatio erilaistaa itsensä muista ensisijaisesti lupaamalla yksilölle korkealuokkaisia, aitoja tuotteita ja palveluja, joilla on henkilökohtaisten hyötyjen lisäksi positiivisia seuraamuksia myös oman alueen työllisyyden ja talouden kehitykseen. Organisaation tulisi myös jatkossa luoda uskottavuutta toimintaansa eritoten sen kautta, että brandi lunastaa lupauksensa laadusta ja aitoudesta. Toisaalta erottautuakseen muista lähi- ja luomuruokabrandeista Slow Food-brandin arvoväittämässä tulisi tulevaisuudessa selkeämmin korostua myös toiminnan voittoa tavoittelemattomuus ja brandiin liittyvä elämyksellisyys. Sidosryhmien kiinnostusta ja brandin lupauksen tehoa alentaviksi tekijöiksi nimettiin yleinen ruoan arvostuksen väheneminen sekä Slow Food-tuotteiden ja -palvelujen korkea hinta, huono saatavuus ja näkyvyys. Keskeisimpinä ratkaisuina pidettiin kuluttajien informatiivisen tiedon lisäämisen ohella pientuottajien verkostoitumista ja uusia yhteistyön muotoja kuten tuottajien yhteisiä jakeluketjuja ja paikallismyymälöitä. Näiden lisäksi brandin tunnistettavuuden parantaminen ja aktiivisempi tarjonta kyltityksin, tuotteiden pysyvän läsnäolon ja vähittäiskaupan mukaantulon kautta sekä eräät muut markkinoinnin osa-alueet kuten sosiaalinen media, Internet ja kansainväliset ruoka-alan tapahtumat nimettiin brandin lupausta kirkastaviksi elementeiksi. Pientuotannon lisääminen verotuksen kohdentumisen muutoksilla nähtiin keinoksi pudottaa paikallisen ruoan hintaa.Toisaalta korkeaa hintaa perusteltiin laadukkaaseen imagoon liittyvien argumenttien lisäksi luonnollisen kysynnän kasvulla, jota arveltiin saatavan tulevaisuudessa suurista ikäluokista, yhä kasvavasta koulutus- ja tulotasosta sekä valveutuneemmista kuluttajista.

A study of the slow reaction in Al-5 wt.% Ag alloy by resistivity measurements

The slow reaction in an Al-5 wt.% Ag alloy has been investigated by resistivity measurements. The "slope change" method gave an activation energy of 1.25 eV for silver diffusion during the slow reaction. The existence of an excess concentration of vacancies in equilibrium with the dislocation loops seems to be responsible for the slow reaction. The presence of silver inhibits the nucleation of dislocation loops by holding up the quenched-in vacancies in solution. There is no indication of the presence of a third stage in the low-temperature ageing process of this alloy.

Energy landscape view of phase transitions and slow dynamics in thermotropic liquid crystals

Thermotropic liquid crystals are known to display rich phase behavior on temperature variation. Although the nematic phase is orientationally ordered but translationally disordered, a smectic phase is characterized by the appearance of a partial translational order in addition to a further increase in orientational order. In an attempt to understand the interplay between orientational and translational order in the mesophases that thermotropic liquid crystals typically exhibit upon cooling from the high-temperature isotropic phase, we investigate the potential energy landscapes of a family of model liquid crystalline systems. The configurations of the system corresponding to the local potential energy minima, known as the inherent structures, are determined from computer simulations across the mesophases. We find that the depth of the potential energy minima explored by the system along an isochor grows through the nematic phase as temperature drops in contrast to its insensitivity to temperature in the isotropic and smectic phases. The onset of the growth of the orientational order in the parent phase is found to induce a translational order, resulting in a smectic-like layer in the underlying inherent structures; the inherent structures, surprisingly, never seem to sustain orientational order alone if the parent nematic phase is sandwiched between the high-temperature isotropic phase and the low-temperature smectic phase. The Arrhenius temperature dependence of the orientational relaxation time breaks down near the isotropic-nematic transition. We find that this breakdown occurs at a temperature below which the system explores increasingly deeper potential energy minima.

Fast versus slow response in climate change: implications for the global hydrological cycle

Recent studies have shown that changes in global mean precipitation are larger for solar forcing than for CO2 forcing of similar magnitude.In this paper, we use an atmospheric general circulation model to show that the differences originate from differing fast responses of the climate system. We estimate the adjusted radiative forcing and fast response using Hansen's ``fixed-SST forcing'' method.Total climate system response is calculated using mixed layer simulations using the same model. Our analysis shows that the fast response is almost 40% of the total response for few key variables like precipitation and evaporation. We further demonstrate that the hydrologic sensitivity, defined as the change in global mean precipitation per unit warming, is the same for the two forcings when the fast responses are excluded from the definition of hydrologic sensitivity, suggesting that the slow response (feedback) of the hydrological cycle is independent of the forcing mechanism. Based on our results, we recommend that the fast and slow response be compared separately in multi-model intercomparisons to discover and understand robust responses in hydrologic cycle. The significance of this study to geoengineering is discussed.

A kinetic Ising model study of dynamical correlations in confined fluids: Emergence of both fast and slow time scales

Experiments and computer simulation studies have revealed existence of rich dynamics in the orientational relaxation of molecules in confined systems such as water in reverse micelles, cyclodextrin cavities, and nanotubes. Here we introduce a novel finite length one dimensional Ising model to investigate the propagation and the annihilation of dynamical correlations in finite systems and to understand the intriguing shortening of the orientational relaxation time that has been reported for small sized reverse micelles. In our finite sized model, the two spins at the two end cells are oriented in the opposite directions to mimic the effects of surface that in real system fixes water orientation in the opposite directions. This produces opposite polarizations to propagate inside from the surface and to produce bulklike condition at the center. This model can be solved analytically for short chains. For long chains, we solve the model numerically with Glauber spin flip dynamics (and also with Metropolis single-spin flip Monte Carlo algorithm). We show that model nicely reproduces many of the features observed in experiments. Due to the destructive interference among correlations that propagate from the surface to the core, one of the rotational relaxation time components decays faster than the bulk. In general, the relaxation of spins is nonexponential due to the interplay between various interactions. In the limit of strong coupling between the spins or in the limit of low temperature, the nature of relaxation of the spins undergoes a qualitative change with the emergence of a homogeneous dynamics where decay is predominantly exponential, again in agreement with experiments. (C) 2010 American Institute of Physics. doi: 10.1063/1.3474948]

Effect of process variables on die-billet temperature history in a slow speed hot coining type process

A computer code is developed as a part of an ongoing project on computer aided process modelling of forging operation, to simulate heat transfer in a die-billet system. The code developed on a stage-by-stage technique is based on an Alternating Direction Implicit scheme. The experimentally validated code is used to study the effect of process specifics such as preheat die temperature, machine ascent time, rate of deformation, and dwell time on the thermal characteristics in a batch coining operation where deformation is restricted to surface level only.

Infinite dimensional slow modulations in a well known delayed model for cutting tool vibrations

We apply the method of multiple scales (MMS) to a well-known model of regenerative cutting vibrations in the large delay regime. By ``large'' we mean the delay is much larger than the timescale of typical cutting tool oscillations. The MMS up to second order, recently developed for such systems, is applied here to study tool dynamics in the large delay regime. The second order analysis is found to be much more accurate than the first order analysis. Numerical integration of the MMS slow flow is much faster than for the original equation, yet shows excellent accuracy in that plotted solutions of moderate amplitudes are visually near-indistinguishable. The advantages of the present analysis are that infinite dimensional dynamics is retained in the slow flow, while the more usual center manifold reduction gives a planar phase space; lower-dimensional dynamical features, such as Hopf bifurcations and families of periodic solutions, are also captured by the MMS; the strong sensitivity of the slow modulation dynamics to small changes in parameter values, peculiar to such systems with large delays, is seen clearly; and though certain parameters are treated as small (or, reciprocally, large), the analysis is not restricted to infinitesimal distances from the Hopf bifurcation.

Room-temperature synthesis of gold nanoparticles - Size-control by slow addition

We report a simple and rapid process for the room-temperature synthesis of gold nanoparticles using tannic acid, a green reagent, as both the reducing and stabilising agent. We systematically investigated the effect of pH on the size distribution of nanoparticles synthesized. Based on induction time and zeta- potential measurements, we show that particle size distribution is controlled by a fine balance between the rates of reduction (determined by the initial pH of reactants) and coalescence (determined by the pH of the reaction mixture) in the initial period of growth. This insight led to the optimal batch process for size-controlled synthesis of 2-10 nm gold nanoparticles - slow addition (within 10 minutes) of chloroauric acid into tannic acid.

A simple equivalent circuit analysis of rectangular folded-waveguide slow-wave structure

A simple yet accurate equivalent circuit model was developed for the analysis of slow-wave properties (dispersion and interaction impedance characteristics) of a rectangular folded-waveguide slow-wave structure. Present formulation includes the effects of the presence of beam-hole in the circuit, which were ignored in existing approaches. The analysis was benchmarked against measurement as well as with 3D electromagnetic modeling using MAFIA for two typical slow-wave structures operating in Ka- and Q-bands, and close agreements were observed. The analysis was extended for demonstrating the effect of the variation of beam-hole radius on the RF interaction efficiency of the device. (C) 2009 Elsevier GmbH. All rights reserved.

Analysis of serpentine folded-waveguide slow-wave structure using elliptical conformal transformation

Elliptical conformal transformation was used to derive closed form expressions for the equivalent circuit series inductance and shunt capacitance per period of a serpentine folded-waveguide slow-wave structure including the effects of the beam-hole. The lumped parameters were subsequently interpreted for the dispersion and interaction impedance characteristics of the structure. The analysis was benchmarked for two typical millimeter-wave structures operating in Ka- and W-bands, against measurement, 3D electromagnetic modeling using CST Microwave Studio, parametric analysis and equivalent circuit analysis. (C) 2010 Elsevier GmbH. All rights reserved.