Biodiversity and ecosystem functioning in angiosperm communities in the Baltic Sea

The biological variation in nature is called biodiversity. Anthropogenic pressures have led to a loss of biodiversity, alarming scientists as to what consequences declining diversity has for ecosystem functioning. The general consensus is that diversity (e.g. species richness or identity) affects functioning and provides services from which humans benefit. The aim of this thesis was to investigate how aquatic plant species richness and identity affect ecosystem functioning in terms of processes such as primary production, nutrient availability, epifaunal colonization and properties e.g. stability of Zostera marina subjected to shading. The main work was carried out in the field and ranged temporally from weeklong to 3.5 months-long experiments. The experimental plants used frequently co-occur in submerged meadows in the northern Baltic Sea and consist of eelgrass (Z. marina), perfoliate pondweed (Potamogeton perfoliatus), sago pondweed (P. pectinatus), slender-leaved pondweed (P. filiformis) and horned pondweed (Zannichellia palustris). The results showed that plant richness affected epifaunal community variables weakly, but had a strong positive effect on infaunal species number and functional diversity, while plant identity had strong effects on amphipods (Gammarus spp.), of which abundances were higher in plant assemblages consisting of P. perfoliatus. Depending on the starting standardizing unit, plant richness showed varying effects on primary production. In shoot density-standardized plots, plant richness increased the shoot densities of three out of four species and enhanced the plant biomass production. Both positive complementarity and selection effects were found to underpin the positive biodiversity effects. In shoot biomass-standardized plots, richness effects only affected biomass production of one species. Negative selection was prevalent, counteracting positive complementarity, which resulted in no significant biodiversity effect. The stability of Z. marina was affected by plant richness in such that Z. marina growing in polycultures lost proportionally less biomass than Z. marina in monocultures and thus had a higher resistance to shading. Monoculture plants in turn gained biomass faster, and thereby had a faster recovery than Z. marina growing in polycultures. These results indicate that positive interspecific interactions occurred during shading, while the faster recovery of monocultures suggests that the change from shading stress to recovery resulted in a shift from positive interactions to resource competition between species. The results derived from this thesis show that plant diversity affects ecosystem functioning and contribute to the growing knowledge of plant diversity being an important component of aquatic ecosystems. Diverse plant communities sustain higher primary productivity than comparable monocultures, affect faunal communities positively and enhance stability. Richness and identity effects vary, and identity has generally stronger effects on more variables than richness. However, species-rich communities are likely to contain several species with differing effects on functions, which renders species richness important for functioning. Mixed meadows add to coastal ecosystem functioning in the northern Baltic Sea and may provide with services essential for human well-being.

Exploitation de contraintes photométriques et géométriques en vision : application au suivi, au calibrage et à la reconstruction

Cette thése a été réalisée dans le cadre d'une cotutelle avec l'Institut National Polytechnique de Grenoble (France). La recherche a été effectuée au sein des laboratoires de vision 3D (DIRO, UdM) et PERCEPTION-INRIA (Grenoble).

Caractérisation des complexes ribonucléoprotéiques de Staufen1 et Staufen2

Dans la cellule, chaque ARNm se doit d’être régulé finement au niveau transcriptionnel, bien entendu, mais également au niveau de sa traduction, de sa dégradation ainsi que de sa localisation intracellulaire, et ce, afin de permettre l’expression de chaque produit protéique au moment et à l’endroit précis où son action est requise. Lorsqu’un mécanisme physiologique est mis de l’avant dans la cellule, il arrive souvent que plusieurs ARNm se doivent d’être régulés simultanément. L’un des moyens permettant d’orchestrer un tel processus est de réguler l’action d’une protéine commune associée à chacun de ces ARNm, via un mécanisme post-traductionnel par exemple. Ainsi l’expression d’un groupe précis d’ARNm peut être régulée finement dans le temps et dans l’espace selon les facteurs protéiques auxquels il est associé. Dans l’optique d’étudier certains de ces complexes ribonucléoprotéiques (mRNP), nous nous sommes intéressés aux isoformes et paralogues de Staufen, une protéine à domaine de liaison à l’ARN double-brin (dsRBD) impliquée dans de nombreux aspects de la régulation post-transcriptionnelle, tels la dégradation, la traduction ou encore la localisation d’ARNm. Chez la drosophile, un seul gène Staufen est exprimé alors que chez les mammifères, il existe deux paralogues de la protéine, soit Stau1 et Stau2, tous deux possédant divers isoformes produits suite à l’épissage alternatif de leur gène. Stau1 et Stau2 sont identiques à 50%. Les deux isoformes de Stau2, Stau259 et Stau262 ne diffèrent qu’en leur extrémité N-terminale. En effet, alors que Stau259 arbore un dsRBD1 tronqué, celui de Stau262 est complet. Ces observations introduisent une problématique très intéressante à laquelle nous nous sommes attaqué : ces différentes protéines, quoique très semblables, font-elles partie de complexes ribonucléoprotéiques distincts ayant des fonctions propres à chacun ou, au contraire, vu cette similarité de séquence, travaillent-elles de concert au sein des mêmes complexes ribonucléoprotéiques? Afin d’adresser cette question, nous avons entrepris d’isoler, à partir de cellules HEK293T, les différents complexes de Stau1 et Stau2 par la technique d’immunoprécipitation. Nous avons isolé les ARNm associés à chaque protéine, les avons identifiés grâce aux micropuces d’ADN et avons confirmé nos résultats par RT-PCR. Malgré la présence d’une population commune d’ARNm associée à Stau1 et Stau2, la majorité des transcrits identifiés furent spécifiques à chaque orthologue. Cependant, nous avons remarqué que les diverses populations d’ARNm participaient aux mêmes mécanismes de régulation, ce qui suggère que ces deux protéines possèdent des rôles complémentaires dans la mise en œuvre de divers phénomènes cellulaires. Au contraire, les transcrits associés à Stau259 et Stau262 sont davantage similaires, indiquant que celles-ci auraient des fonctions plutôt semblables. Ces résultats sont très intéressants, car pour la première fois, nous avons identifié des populations d’ARNm associées aux isoformes Stau155, Stau259 et Stau262. De plus, nous les avons analysées en parallèle afin d’en faire ressortir les populations spécifiques à chacune de ces protéines. Ensuite, connaissant l’importance de Stau2 dans le transport dendritique d’ARNm, nous avons cherché à caractériser les complexes ribonucléoprotéiques neuronaux associés à celle-ci. Dans un premier temps et à l’aide de la technique d’immunoprécipitation, nous avons identifié une population d’ARNm neuronaux associés à Stau2. Plus de 1700 ARNm montraient une présence d’au moins huit fois supérieure dans le précipité obtenu avec l’anticorps anti-Stau2 par rapport à celui obtenu avec le sérum pré-immun. Ces ARNm codent pour des protéines impliquées dans des processus de modifications post-traductionnelles, de traduction, de transport intracellulaire et de métabolisme de l’ARN. De façon intéressante, cette population d’ARNm isolée du cerveau de rat est relativement différente de celle caractérisée des cellules humaines HEK293T. Ceci suggère que la spécificité d’association Stau2-ARNm peut diffèrer d’un tissu à un autre. Dans un deuxième temps, nous avons isolé les protéines présentes dans les complexes ribonucléoprotéiques obtenus de cerveaux de rat et les avons identifiées par analyse en spectrométrie de masse. De cette façon, nous avons identifié au sein des particules de Stau2 des protéines liant l’ARN (PABPC1, hnRNPH1, YB1, hsc70), des protéines du cytosquelette (α- et β-tubuline), de même que la protéine peu caractérisée RUFY3. En poussant davantage la caractérisation, nous avons établi que YB1 et PABPC1 étaient associées à Stau2 grâce à la présence de l’ARN, alors que la protéine hsc70, au contraire, interagissait directement avec celle-ci. Enfin, cette dernière association semble être modulable par l’action de l’ATP. Ce résultat offre de nombreuses possibilités quant à la régulation de la fonction de Stau2 et/ou de son mRNP. Entre autres, cette étude suggère un mécanisme de régulation de la traduction au sein de ces particules. Pour faire suite à la caractérisation des mRNP de Stau, nous avons voulu déterminer au niveau neurophysiologique l’importance de ceux-ci. Comme l’étude de Stau2 avait déjà été entreprise préalablement par un autre laboratoire, nous avons décidé de concentrer notre étude sur le rôle de Stau1. Ainsi, nous avons démontré que celle-ci était nécessaire à la mise en place d’une forme de plasticité synaptique à long terme, la forme tardive de potentialisation à long terme ou L-LTP, dépendante de la transcription et de l’activité des récepteurs NMDA. La transmission de base, de même que la faculté de ces épines à faire de la E-LTP, la forme précoce de potentialisation à long terme, et la dépression à long terme ou LTD sont conservées. Ceci indique que les épines conservent la capacité d’être modulées. Ainsi, l’inhibition de la L-LTP, suite à la sous-expression de Stau1, n’est pas simplement due à la perte d’éléments fonctionnels, mais réside plutôt dans l’incapacité de ceux-ci à induire les changements synaptiques spécifiquement nécessaires à la mise en place de la L-LTP. De plus, au niveau synaptique, la sous-expression de Stau1 réduit à la fois l’amplitude et la fréquence des mEPSC. Ces résultats concordent avec l’observation que la sous-expression de Stau1 augmente significativement la proportion d’épines allongées et filopodales, des épines formant des synapses dites silencieuses. Par le fait même, elle diminue le nombre d’épines fonctionnelles, de forme dite normale. Ainsi, nous avons été en mesure de démontrer que l’absence, au niveau neuronal, de la protéine Stau1 induisait un déficit probable dans la localisation et/ou la traduction d’ARNm responsable de la restructuration de l’épine et de facteurs nécessaires à la mise en place de la L-LTP. En conclusion, nous avons participé à lever le voile sur la composition et l’importance des complexes ribonucléoprotéiques de Stau1 et Stau2. Nous avons identifié des populations distinctes et communes d’ARNm associées aux différents isoformes de Stau, à partir des mRNP présents au sein des cellules HEK293. De plus, nous avons réussi à mettre à l’avant plan certaines composantes des mRNP neuronaux de Stau2, dont un partenaire protéique direct, hsc70, partenaire dont l’association est modulable par l’action de l’ATP, ainsi qu’une population neuronale de transcrits d’ARNm. Enfin, nous avons mis en lumière l’importance de Stau1 dans la morphologie des épines dendritiques ainsi que dans le phénomène de la plasticité synaptique.

Condensation of helium in nanoscopic alkali wedges at zero temperature

We present a complete calculation of the structure of liquid 4He confined to a concave nanoscopic wedge, as a function of the opening angle of the walls. This is achieved within a finite-range density functional formalism. The results here presented, restricted to alkali metal substrates, illustrate the change in meniscus shape from rather broad to narrow wedges on weak and strong alkali adsorbers, and we relate this change to the wetting behavior of helium on the corresponding planar substrate. As the wedge angle is varied, we find a sequence of stable states that, in the case of cesium, undergo one filling and one emptying transition at large and small openings, respectively. A computationally unambiguous criterion to determine the contact angle of 4He on cesium is also proposed.

Determining the effect of asymmetric data on the variogram. II. Outliers

Asymmetry in a distribution can arise from a long tail of values in the underlying process or from outliers that belong to another population that contaminate the primary process. The first paper of this series examined the effects of the former on the variogram and this paper examines the effects of asymmetry arising from outliers. Simulated annealing was used to create normally distributed random fields of different size that are realizations of known processes described by variograms with different nugget:sill ratios. These primary data sets were then contaminated with randomly located and spatially aggregated outliers from a secondary process to produce different degrees of asymmetry. Experimental variograms were computed from these data by Matheron's estimator and by three robust estimators. The effects of standard data transformations on the coefficient of skewness and on the variogram were also investigated. Cross-validation was used to assess the performance of models fitted to experimental variograms computed from a range of data contaminated by outliers for kriging. The results showed that where skewness was caused by outliers the variograms retained their general shape, but showed an increase in the nugget and sill variances and nugget:sill ratios. This effect was only slightly more for the smallest data set than for the two larger data sets and there was little difference between the results for the latter. Overall, the effect of size of data set was small for all analyses. The nugget:sill ratio showed a consistent decrease after transformation to both square roots and logarithms; the decrease was generally larger for the latter, however. Aggregated outliers had different effects on the variogram shape from those that were randomly located, and this also depended on whether they were aggregated near to the edge or the centre of the field. The results of cross-validation showed that the robust estimators and the removal of outliers were the most effective ways of dealing with outliers for variogram estimation and kriging. (C) 2007 Elsevier Ltd. All rights reserved.

Measurement of thermal neutron cross section and resonance integral for the (165)Ho(n, gamma)(166g)Ho reaction

The ground state thermal neutron cross section and the resonance integral for the (165)Ho(n, gamma)(166)Ho reaction in thermal and 1/E regions, respectively, of a thermal reactor neutron spectrum have been measured experimentally by activation technique. The reaction product, (166)Ho in the ground state, is gaining considerable importance as a therapeutic radionuclide and precisely measured data of the reaction are of significance from the fundamental point of view as well as for application. In this work, the spectrographically pure holmium oxide (Ho(2)O(3)) powder samples were irradiated with and without cadmium covers at the IEA-RI reactor (IPEN, Sao Paulo), Brazil. The deviation of the neutron spectrum shape from 1/E law was measured by co-irradiating Co, Zn, Zr and Au activation detectors with thermal and epithermal neutrons followed by regression and iterative procedures. The magnitudes of the discrepancies that can occur in measurements made with the ideal 1/E law considerations in the epithermal range were studied. The measured thermal neutron cross section at the Maxwellian averaged thermal energy of 0.0253 eV is 59.0 +/- 2.1 b and for the resonance integral 657 +/- 36b. The results are measured with good precision and indicated a consistency trend to resolve the discrepant status of the literature data. The results are compared with the values in main libraries such as ENDF/B-VII, JEF-2.2 and JENDL-3.2, and with other measurements in the literature.

Comparison of fracture surface and plane section analysis for ceramic grain size characterisation

A method has been developed to obtain quantitative information about grain size and shape from fractured surfaces of ceramic materials. One elaborated a routine to split intergranular and transgranular grains facets of ceramic fracture surfaces by digital image processing. A commercial ceramic (ALCOA A-16, Al2O3-1.5% of CrO) was used to test the proposed method. Microstructural measurements of grain shape and size taken from fracture surfaces have been compared through descriptive statistics of distributions, with the corresponding measurements from polished and etched surfaces. The agreement between results, with the expected bias on grain size values from fractures, obtained for both types of surfaces allowed to infer that this new technique can be used to extract the relevant microstructural information from fractured surfaces, thus minimising the time consuming steps of sample preparation. (C) 2003 Elsevier Ltd. All rights reserved.

Ultramorphological characteristics of Chrysomya megacephala (Diptera, Calliphoridae) eggs and its eclosion

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

CRANIOMETRIC VARIATION AND SUBSPECIFIC DIFFERENTIATION IN THRICHOMYS APEREOIDES IN NORTHEASTERN BRAZIL (RODENTIA, ECHIMYIDAE)

Thrichomys apereoides is an echimyid rodent which ranges in distribution from northeastern and central Brazil into Paraguay. Five subspecies are recognized, although each form is not well characterized and diagnosis is based primarily in pelage color variation. In this study we employed procedures from multivariate statistics to assess the systematic status of subspecies described from northeastern Brazil. The results of the craniometric analysis cannot be reconciled with the subspecies currently recognized for northeastern Brazil. Populations assigned to T. a. laurentius and T. a. inermis form a continuum of variation in cranial size, although they differ in cranial shape from a population from the locality of Bodoco in the state of Pernambuco. The implications of these findings for the systematics of T. apereoides are discussed.

Cranial differentiation and evolution in Thrichomys apereoides (Rodentia: Echimyidae)

Thrichomys apereoides is an echimyid rodent which ranges in distribution from north-eastern and central Brazil into Paraguay, and currently five subspecies are recognized. Recent morphometric analyses of population samples formally assignable to T. a. laurentius and T. a. inermis, which occur in north-eastern Brazil, have shown that a major group of populations including both subspecies differ in cranial shape from a single population allocated to T. a. laurentius. In this study we employed mathematical models of evolutionary quantitative genetics to assess the role that random drift and selection may have played in the evolution of cranial shape differences in T. apereoides. The hypothesis of evolution due to drift was rejected and the selective forces necessary to account for shape differences were estimated. Minimum selective mortalities of the order of 10(-3) per generation were sufficient to explain the observed morphologic differentiation.

Evolution of caste in neotropical swarm-founding wasps (Hymenoptera : Vespidae; Epiponini)

Reproductive castes are compared in species of swarming wasps representing all currently recognized genera of Epiponini (Polistinae). New morphometric data for nine measures of body parts and ovarian data are presented for 13 species. These are integrated with all similarly conducted available studies, giving a total of 30 species. Analysis reveals several syndromes relating reproductive and nonreproductive individuals: no meaningful distinction, physiological differences only, reproductives larger than nonreproductives with intermediate individuals present, reproductives different in shape from nonreproductives with no intermediates, and reproductives smaller in some aspects than nonreproductives. Distribution of these syndromes among species is consistent with phylogenetic relationships derived from other data. Optimizing these syndromes on the cladogram indicates that the basal condition of Epiponini is a casteless society that is not comparable to the primitively social genus Polistes where dominant queens control reproduction. Castes originate several times in Epiponini, with different results in different lineages. The best documented evolutionary sequence passes from casteless societies, to those with reproductives larger, to those with reproductives differing in shape from nonreproductives, to those with reproductives smaller in some measures. This sequence is consistent with Wheeler's theory of the origin of caste through developmental switches, and represents the most thorough test of that theory to date.

Capital flows to Latin America: fourth quarter 2002

Includes bibliography

Considerações sobre a anatomia funcional e adptativa de alguns sigmodontinae (Mammalia : Rodentia : Muridae)

Entre os mamíferos, os pequenos roedores compõem um grupo singular. Devido sua grande capacidade reprodutiva e adaptabilidade aos diferentes hábitats tornaram-se animais em plena explosão evolutiva. Filogeneticamente, o grupo ainda não está bem caracterizado e apresenta fortes similaridades morfológicas para os roedores Sigmodontinae da Serra dos Carajás. Através de estudos das características externas e de alguns ossos do pós-crânio relacionados ao hábito locomotor observamos que: 1) a preferência de habitat dentro da região da Serra dos Carajás entre os roedores estudados, parece não está relacionada a um padrão filogenético; 2) não foi possível estabelecer uma correlação entre as características ecológicas e as principais feições morfológicas do pós-- crânio ligadas ao desenho corporal entre os Sigmodontinae; 3) a morfologia do úmero e fêmur contém forte sinal filogenético característico de subfamília Sigmodontinae 4) os índices intermembral, crural e braquial não foram eficazes na caracterização dos vários modos de locomoção entre os roedores Sigmodontinae.

Tensid- und Interpolyelektrolytkomplexe semiflexibler Polyelektrolyte

Hochgeladene semiflexible kationische und anionische Polyelektrolyte wurden mit niedermolekularen Tensiden zu Polyelektrolyt-Tensid-Komplexen (PETK) umgesetzt und in organischen Lösungsmitteln mit Streumethoden und Rasterkraftmikroskopie charakterisiert. Die synthetisierten PETK wurden anschließend, mit dem Ziel einer strukturkontrollierten Komplexbildung, für die Bildung von Interpolyelektrolytkomplexen (IPEK) in organischen Lösungsmitteln verwendet und anhand ihres Komplexbildungsverhaltens mit wässrigen Systemen verglichen. Die Umsetzung von zylindrischen Polymerbürsten mit Poly(styrolsulfonat)-, bzw. Poly(2-vinylpyridinium)-Seitenketten mit entgegengesetzt geladenen Tensiden verlief, trotz einer Graftingdichte von eins, quantitativ. Mit Streumethoden konnte gezeigt werden, dass die gebildeten PETK in Lösung als molekulare Zylinder vorliegen. Die Synthese von pUC19-DNA-Tensidkomplexen (DNA-TK), die sich in Alkoholen gut lösen, ist nur in stark basischer Lösung gelungen. Während der Charakterisierung der DNA-TK mit Streumethoden zeigte sich eine starke Abhängigkeit des Trägheitsradius von dem Verhältnis DNA-/Salz+. Die Bildung von IPEK aus hochgeladenen Polyelektrolyt-Bürsten bzw. PETK-Bürsten wurde an verschiedenen Beispielen in Wasser und DMF durchgeführt und mit Streumethoden verfolgt. Alle Systeme zeigten ein zu der IPEK-Bildung von linearen Polyelektrolyten analoges Komplexbildungsverhalten. Bei der Komplexierung von Poly(styrolsulfonat)-Bürsten-Tensidkomplexen mit kommerziellen Polyamidoamin-G5-Dendrimeren (PAMAM) oder Poly(ethylenoxid) modifizierten Poly(ethylenimin)-Bürsten hingegen wurden über den gesamten Gewichtsbruchbereich mit Streumethoden und AFM zylindrische Aggregate gefunden, die den Dimensionen der Poly(styrolsulfonat)-Bürsten-Tensidkomplexe entsprechen. Durch statistische Höhenanalyse der AFM-Bilder wurde ein linearer Zusammenhang zwischen der Komplexhöhe und dem Gewichtsbruch an PAMAM, bzw. PEI-PEO gefunden, der auf die Zunahme der Molmasse der Komplexe durch Wachstum entlang des Zylinderdurchmessers hindeutet. Die Bildung von Aggregaten, mit mehr als einem Polyanion, wurde nicht beobachtet.

Thermal excitations of optical nanofibers measured with a fiber-integrated Fabry-Pérot cavity

Efficient coupling of light to quantum emitters, such as atoms, molecules or quantum dots, is one of the great challenges in current research. The interaction can be strongly enhanced by coupling the emitter to the eva-nescent field of subwavelength dielectric waveguides that offer strong lateral confinement of the guided light. In this context subwavelength diameter optical nanofibers as part of a tapered optical fiber (TOF) have proven to be powerful tool which also provide an efficient transfer of the light from the interaction region to an optical bus, that is to say, from the nanofiber to an optical fiber. rnAnother approach towards enhancing light–matter interaction is to employ an optical resonator in which the light is circulating and thus passes the emitters many times. Here, both approaches are combined by experi-mentally realizing a microresonator with an integrated nanofiber waist. This is achieved by building a fiber-integrated Fabry-Pérot type resonator from two fiber Bragg grating mirrors with a stop-band near the cesium D2-line wavelength. The characteristics of this resonator fulfill the requirements of nonlinear optics, optical sensing, and cavity quantum electrodynamics in the strong-coupling regime. Together with its advantageous features, such as a constant high coupling strength over a large volume, tunability, high transmission outside the mirror stop band, and a monolithic design, this resonator is a promising tool for experiments with nanofiber-coupled atomic ensembles in the strong-coupling regime. rnThe resonator's high sensitivity to the optical properties of the nanofiber provides a probe for changes of phys-ical parameters that affect the guided optical mode, e.g., the temperature via the thermo-optic effect of silica. Utilizing this detection scheme, the thermalization dynamics due to far-field heat radiation of a nanofiber is studied over a large temperature range. This investigation provides, for the first time, a measurement of the total radiated power of an object with a diameter smaller than all absorption lengths in the thermal spectrum at the level of a single object of deterministic shape and material. The results show excellent agreement with an ab initio thermodynamic model that considers heat radiation as a volumetric effect and that takes the emitter shape and size relative to the emission wavelength into account. Modeling and investigating the thermalization of microscopic objects with arbitrary shape from first principles is of fundamental interest and has important applications, such as heat management in nano-devices or radiative forcing of aerosols in Earth's climate system. rnUsing a similar method, the effect of the TOF's mechanical modes on the polarization and phase of the fiber-guided light is studied. The measurement results show that in typical TOFs these quantities exhibit high-frequency thermal fluctuations. They originate from high-Q torsional oscillations that couple to the nanofiber-guided light via the strain-optic effect. An ab-initio opto-mechanical model of the TOF is developed that provides an accurate quantitative prediction for the mode spectrum and the mechanically induced polarization and phase fluctuations. These high-frequency fluctuations may limit the ultimate ideality of fiber-coupling into photonic structures. Furthermore, first estimations show that they may currently limit the storage time of nanofiber-based atom traps. The model, on the other hand, provides a method to design TOFs with tailored mechanical properties in order to meet experimental requirements. rn