994 resultados para Sensory trained panel
Resumo:
Three batches of oats were extruded under four combinations of process temperature (150 or 180 °C) and process moisture (14.5 and 18%). Two of the extrudates were evaluated by a sensory panel, and three were analyzed by GC-MS. Maillard reaction products, such as pyrazines, pyrroles, furans, and sulfur-containing compounds, were found in the most severely processed extrudates (high-temperature, low-moisture). These extrudates were also described by the assessors as having toasted cereal attributes. Lipid degradation products, such as alkanals, 2-alkenals, and 2,4-alkadienals, were found at much higher levels in the extrudates of the oat flour that had been debranned. It contained lower protein and fiber levels than the others and showed increased lipase activity. Extrudates from these samples also had significantly lower levels of Maillard reaction products that correlated, in the sensory analysis, with terms such as stale oil and oatmeal. Linoleic acid was added to a fourth oat flour to simulate the result of increased lipase activity, and GC-MS analysis showed both an increase in lipid degradation products and a decrease in Maillard reaction products.
Resumo:
Impaired sensorial perception is very common in older people and low sensorial quality of foods is associated with decreased appetite and dietary intake. Hospital undernutrition in older patients could be linked to sensorial quality of hospital food if the quality were low or inappropriate for older people. The aim of this study was to examine changes in the sensorial quality of different foods that occur as a result of the food journey (i.e. freezing, regeneration, etc.) in the most common hospital catering systems in the UK. A trained sensory panel assessed sensorial descriptors of certain foods with and without the hospital food journey as it occurs in the in-house and cook/freeze systems. The results showed effects of the food journey on a small number of sensorial descriptors related to flavour, appearance and mouthfeel. The majority of these effects were due to temperature changes, which caused accumulation of condensation. A daily variation in sensorial descriptors was also detected and in some cases it was greater than the effect of the food journey. This study has shown that changes occur in the sensory quality of meals due to hospital food journeys, however these changes were small and are not expected to substantially contribute to acceptability or have a major role in hospital malnutrition.
Resumo:
Detailed understanding of the haemodynamic changes that underlie non-invasive neuroimaging techniques such as blood oxygen level dependent functional magnetic resonance imaging is essential if we are to continue to extend the use of these methods for understanding brain function and dysfunction. The use of animal and in particular rodent research models has been central to these endeavours as they allow in-vivo experimental techniques that provide measurements of the haemodynamic response function at high temporal and spatial resolution. A limitation of most of this research is the use of anaesthetic agents which may disrupt or mask important features of neurovascular coupling or the haemodynamic response function. In this study we therefore measured spatiotemporal cortical haemodynamic responses to somatosensory stimulation in awake rats using optical imaging spectroscopy. Trained, restrained animals received non-noxious stimulation of the whisker pad via chronically implanted stimulating microwires whilst optical recordings were made from the contralateral somatosensory cortex through a thin cranial window. The responses we measure from un-anaesthetised animals are substantially different from those reported in previous studies which have used anaesthetised animals. These differences include biphasic response regions (initial increases in blood volume and oxygenation followed by subsequent decreases) as well as oscillations in the response time series of awake animals. These haemodynamic response features do not reflect concomitant changes in the underlying neuronal activity and therefore reflect neurovascular or cerebrovascular processes. These hitherto unreported hyperemic response dynamics may have important implications for the use of anaesthetised animal models for research into the haemodynamic response function.
Resumo:
Oral nutritional supplement drinks (ONS) are beverages high in dairy proteins that are prescribed to individuals at risk of malnutrition. Consumption of ONS is poor in elderly care facilities, with patients commenting that the sensory attributes of these drinks reduce their enjoyment and willingness to consume. Mouth drying is an attribute of ONS found to build with repeated consumption, which may further limit liking of these products. This study investigated the sources of drying sensations by sequential profiling, with a trained sensory panel rating a range of model milk systems and ONS over repeated sips and during after-effects. Sequential profiling found that fortification of milk with both caseinate and whey protein concentrate significantly increased the perception of mouth drying over repeated consumption, increasing by between 35 and 85% over consumption of 40mL. Enrichment of ONS with either whey protein concentrate or milk protein concentrate to a total protein content of 8.7% (wt/wt) resulted in whey and casein levels of 4.3:4.4% and 1.7:7.0% respectively. The product higher in whey protein was substantially more mouth drying, implying that whey proteins may be the most important contributor to mouth drying in ONS. However, efforts to mask mouth drying of protein-fortified milk by increasing sweetness or fat level were unsuccessful at the levels tested. Increasing the viscosity of protein-fortified milk led to a small but significant reduction in mouth drying. However, this approach was not successful when tested within complete ONS. Further analysis is required into the mechanism of protein-derived mouth drying to mask negative sensations and improve the enjoyment and consumption of protein-rich ONS.
Resumo:
The effects of several fat replacement levels (0%, 35%, 50%, 70%, and 100%) by inulin in sponge cake microstructure and physicochemical properties were studied. Oil substitution for inulin decreased significantly (P < 0.05) batter viscosity, giving heterogeneous bubbles size distributions as it was observed by light microscopy. Using confocal laser scanning microscopy the fat was observed to be located at the bubbles’ interface, enabling an optimum crumb cake structure development during baking. Cryo-SEM micrographs of cake crumbs showed a continuous matrix with embedded starch granules and coated with oil; when fat replacement levels increased, starch granules appeared as detached structures. Cakes with fat replacement up to 70% had a high crumb air cell values; they were softer and rated as acceptable by an untrained sensory panel (n = 51). So, the reformulation of a standard sponge cake recipe to obtain a new product with additional health benefits and accepted by consumers is achieved.
Resumo:
The utilization of protein hydrolysates in food systems is frequently hindered due to their bitterness and hygroscopicity. Spray drying technology could be an alternative for reducing these problems. The aim of this work was to reduce or to mask the casein hydrolysate bitter taste using spray drying and mixtures of gelatin and soy protein isolate (SPI) as carriers. Six formulations were studied: three with 20% of hydrolysate and 80% of mixture (gelatine/SPI at proportions of 50/50, 40/60 and 60/40%) and three with 30% of hydrolysate and 70% of mixture (gelatine/SPI at proportions of 50/50, 40/60 and 60/40%). The spray-dried formulations were evaluated by SEM, hygroscopicity, thermal behavior (DSC), dissolution, and bitter taste, by a trained sensory panel using a paired-comparison test (free samples vs. spray-dried samples); all samples were presented in powder form. SEM analysis showed mostly spherically shaped particles, with many concavities and some particles with pores. All formulations were oil and water compatible and showed lower hygroscopicity values than free casein hydrolysate. At Aw 0.83, the free hydrolysate showed Tg about 25 degrees C lower than the formulations, indicating that the formulations may be more stable at Aw >= 0.65 since the glass transition should be prevented. The sensory panel found the formulations, tasted in the powder form, to be less bitter (P < 0.05) than the free casein hydrolysate. These results indicated that spray drying of casein hydrolysate with mixtures of gelatin and SPI was successful to attenuate the bitterness of casein hydrolysate. Thus, spray drying widens the possibilities of application of casein hydrolysates. (C) 2009 Elsevier Ltd. All rights reserved.
Resumo:
The aim of this work was to encapsulate casein hydrolysate by complex coacervation with soybean protein isolate (SPI)/pectin. Three treatments were studied with wall material to core ratio of 1:1, 1:2 and 1:3. The samples were evaluated for morphological characteristics, moisture, hygroscopicity, solubility, hydrophobicity, surface tension, encapsulation efficiency and bitter taste with a trained sensory panel using a paired comparison test. The samples were very stable in cold water. The hydrophobicity decreased inversely with the hydrolysate content in the microcapsule. Encapsulated samples had lower hygroscopicity values than free hydrolysate. The encapsulation efficiency varied from 91.62% to 78.8%. Encapsulated samples had similar surface tension, higher values than free hydrolysate. The results of the sensory panel test considering the encapsulated samples less bitter (P < 0.05) than the free hydroly-state, showed that complex coacervation with SPI/pectin as wall material was an efficient method for microencapsulation and attenuation of the bitter taste of the hydrolysate. (C) 2009 Elsevier Ltd. All rights reserved.
Microcapsules of a Casein Hydrolysate: Production, Characterization, and Application in Protein Bars
Resumo:
The aim of this work was to encapsulate a casein hydrolysate by spray drying using maltodextrins (DE 10 and 20) as wall materials and to evaluate the efficiency of the microencapsulation in attenuating the bitter taste of the hydrolysate using protein bars as the model system. Microcapsules were evaluated for morphology (SEM), particle size, hygroscopicity, solubility, thermal behavior (DSC), and bitter taste with a trained sensory panel by a paired comparison test (nonencapsulated samples vs. encapsulated samples). Bars were prepared with the addition of 3% casein hydrolysate at free or both encapsulated forms, and were then evaluated for their moisture, water activity (a(w)) and for their bitter taste by a ranking test. Microcapsules were of the matrix type, having continuous surfaces with no apparent porosity for both coatings. Both encapsulated casein hydrolysates had similar hygroscopicity, and lower values than free encapsulated hydrolysates. The degree of hydrolysis of the maltodextrin influenced only the particle size and T(g). The sensory panel considered the protein bars produced with both encapsulated materials less bitter (p < 0.05) than those produced with the free casein hydrolysates. Microencapsulation by spray drying with maltodextrin DE 10 and 20 was successful to attenuate the bitter taste and the hygroscopicity of casein hydrolysates.
Resumo:
The aim of this work was to encapsulate casein hydrolysate by spray drying with soybean protein isolate (SPI) as wall material to attenuate the bitter taste of that product. Two treatments were prepared: both with 12 g/100 g solids and containing either two proportions of SPI: hydrolysate (70:30 and 80:20), called M1 and M2, respectively. The samples were evaluated for morphological characteristics (SEM), particle size, hygroscopicity, solubility, hydrophobicity, thermal behavior and bitter taste with a trained sensory panel using a paired-comparison test (non-encapsulated samples vs. encapsulated samples). Microcapsules had a continuous wall, many concavities, and no porosity. Treatments M1 and M2 presented average particle sizes of 11.32 and 9.18 mu m, respectively. The wall material and/or the microencapsulation raised the hygroscopicity of the hydrolysate since the free hydrolysate had hygroscopicity of 53 g of water/100 g of solids and M1 and M2 had 106.99 and 102.19 g of water/100 g of solids, respectively. However, the hydrophobicity decreases, the absence of a peak in encapsulated hydrolysates, and the results of the panel sensory test considering the encapsulated samples less bitter (p < 0.05) than the non-encapsulated, showed that spray drying with SPI was an efficient method for microencapsulation and attenuation of the bitter taste of the casein hydrolysate. (c) 2008 Elsevier Ltd. All rights reserved.
Resumo:
A modified quantitative descriptive analysis (QDA) method was used to determine sensory profiles of 8 soymilk products: 3 manufactured in Australia, 3 manufactured in Singapore, 1 manufactured in Malaysia, and 1 manufactured in Hong Kong. A panel (n= 7) was selected, trained in descriptive profiling of soymilk, and developed a soymilk language that was used to evaluate the flavor attributes of the soymilk products. A repeated-measure ANOVA showed highly reproducible panel performance, and significant differences in soymilk attributes among all soymilks. A principal component analysis (PCA) revealed 2 main groupings among the soymilks that corresponded to cultural origin: Australia and Asia (Singapore and Hong Kong/Malaysia). Products from Australia were significantly stronger in milky, astringent, salty notes and pale in color, while products from Asia were significantly stronger in beany, cooked beans, sweet, and pandan notes (P < 0.05). In addition, the Asian soymilks could be separated into 2 subgroups, with Singaporean soymilks having deeper color, greater viscosity, and less green flavor than Hong Kong/Malaysia soymilks. Australian produced soymilk is bovine-milk-like compared with Asian soymilk, presumably due to bovine milk being the primary source of milk in Australia. We conclude that culture-specific flavor preferences are a determining factor in flavor profiles of soymilks from geographically distinct regions.
Resumo:
The effects of dietary manipulation of muscle long-chain omega-3 fatty acids (FA) on sensory properties of cooked meat in second cross ([Merino×Border Leicester]×Poll Dorset) wether lambs were evaluated. Lambs fed dietary supplements of fish meal (FM, Exp. 1) and fish oil (FO, Exp. 2) showed moderately (P<0.01) and markedly (P<0.001) increased muscle long-chain omega-3 FA content compared with those fed the basal diet of lucerne chaff and oat chaff. Protected canola seed (PCS, Exp. 1) significantly (P<0.001) increased omega-6 FA content of the longissimus muscle. In each of the 2 experiments (1 and 2), after being fed experimental diets for 6 weeks lambs were slaughtered at a commercial abattoir. At 24 h post-mortem (PM) the semitendinosus and biceps femoris muscles were removed from animals and stored at −20°C until evaluation of sensory properties using experienced panel members. The muscle samples were stored for 3 (Exp. 1) and 12 (Exp. 2) months then removed, thawed and cooked for sensory evaluation. The meat samples were cooked under standardized conditions in a convection microwave at 180°C (20–25 min) to an internal temperature of 75°C. Cooked samples were tested for flavour, aroma, juiciness and overall palatability. The significant increase in muscle long-chain omega-3 with FM (Exp. 1 and 2) and FO (Exp. 2) or omega-6 FA with PCS (Exp. 1) were not detrimental to sensory panel evaluations of flavour or aroma of cooked meat when compared with the basal diet. However, meat from FM (Exp. 1) had lower juiciness and FO (Exp. 2) had lower overall palatability. Protected sunflower meal protein with FO (Exp. 2) significantly lowered ratings for flavour, juiciness and overall palatability. Lamb meat with increased levels of long-chain omega-3 FA can be produced without altering the sensory quality (flavour or aroma) of the cooked meat.
Resumo:
A fruta jambolão (Syzygium cumini Lamarck) é uma fruta de coloração roxa intensa e sabor agradável. Dado que não há na literatura nenhum relato de seu aproveitamento industrial, a produção de geléia de jambolão tornou-se uma interessante atividade de pesquisa. Este trabalho objetivou a elaboração e a avaliação das características físico-químicas e sensoriais da geléia obtida do jambolão. A fruta apresentou a seguinte composição química: cinzas, 0,34%; lipídeos, 0,30%; proteínas, 0,67%; carboidratos, 10,07%; fibras, 0,28%; umidade, 87,75%; frutose, 0,4%; glicose, 0,6%; antocianinas totais, 0,276%; substâncias pécticas, 0,245%; acidez titulável, 5,91%; sólidos solúveis, 9,00%; e pH, 3,9. A geléia obtida apresentou a seguinte composição: açúcares redutores, 20,99%; não-redutores, 18,01%; açúcares totais, 39,00%; pH, 3,42; sólidos solúveis, 67ºBrix; acidez titulável, 5,47%; e umidade, 29,63%. A análise sensorial foi realizada por uma equipe de 50 provadores não treinados que avaliaram os atributos cor, aparência, odor, textura, sabor e avaliação global, pelo método de escala hedônica com nove pontos. Os resultados obtidos mostraram que o atributo cor foi o que mais agradou aos provadores, o atributo odor foi o menos apreciado. em conclusão, o estudo de análise sensorial revelou uma aceitação satisfatória da geléia de jambolão.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)