Wireless parylene-based retinal implant

The degeneration of the outer retina usually causes blindness by affecting the photoreceptor cells. However, the ganglion cells, which consist of optic nerves, on the middle and inner retina layers are often intact. The retinal implant, which can partially restore vision by electrical stimulation, soon becomes a focus for research. Although many groups worldwide have spent a lot of effort on building devices for retinal implant, current state-of-the-art technologies still lack a reliable packaging scheme for devices with desirable high-density multi-channel features. Wireless flexible retinal implants have always been the ultimate goal for retinal prosthesis. In this dissertation, the reliable packaging scheme for a wireless flexible parylene-based retinal implants has been well developed. It can not only provide stable electrical and mechanical connections to the high-density multi-channel (1000+ channels on 5 mm × 5 mm chip area) IC chips, but also survive for more than 10 years in the human body with corrosive fluids.

The device is based on a parylene-metal-parylene sandwich structure. In which, the adhesion between the parylene layers and the metals embedded in the parylene layers have been studied. Integration technology for high-density multi-channel IC chips has also been addressed and tested with dummy and real 268-channel and 1024-channel retinal IC chips. In addition, different protection schemes have been tried in application to IC chips and discrete components to gain the longest lifetime. The effectiveness has been confirmed by the accelerated and active lifetime soaking test in saline solution. Surgical mockups have also been designed and successfully implanted inside dog's and pig's eyes. Additionally, the electrodes used to stimulate the ganglion cells have been modified to lower the interface impedance and shaped to better fit the retina. Finally, all the developed technologies have been applied on the final device with a dual-metal-layer structure.

Solid-state NMR study of bioactive binary borosilicate glasses

A series of binary borosilicate glasses prepared by the sol-gel method are shown to be bioactive. Tetraethyl orthosilicate (TEOS) and trimethylborate (TMB) in acidic medium are used to prepare xB(2)O(3)center dot(1-x)SiO2 glass systems for x = 0.045-0.167. The formation of a layer of apatite-like mineral on the glass surface becomes apparent after soaking in simulated body fluid for 48 h. We have measured the B-11-B-11 homonuclear second moments of the borosilicate glasses and inferred that no macroscopic phase separation occurred in our glasses. The B-11 chemical shift data also show that the formation of clustered boroxol rings is negligible in our glass system. Although the bioactivity of our borosilicate glasses is less than that of CaO-SiO2 sol-gel glasses, these simple binary systems could be taken as reference glass systems for the search of new bioactive borosilicate glasses. (C) 2008 Elsevier Ltd. All rights reserved.

Efficiency and catch dynamics of collapsible square and conical pots used in the red king crab (Paralithodes camtschaticus) fishery

We compared the capture efficiency and catch dynamics of collapsible square and conical pots used in resource assessment and harvesting of red king crabs (Paralithodes camtschaticus [Tilesius, 1815]) in the Barents Sea. After two days of soaking, square pots caught three times as many crabs as conical pots, and their catches consisted of a higher proportion of male crabs and male crabs larger than 160 mm carapace length compared to the catches in the conical pots. Catches in the square pots did not increase as soak times were increased beyond two days, which indicates equilibrium between the rate of entries into and the rate of exits from the pots. Catches in conical pots, however, increased with increasing soak times up to eight days, the longest soak time examined in this study. These findings demonstrate the higher efficiency of square pots and the importance of understanding catch dynamics when making population assessments based on catchper-unit-of-effort data. The favorable catch characteristics and handling properties of the collapsible square pot may make this pot design suitable for other crab fisheries, as well.

Avaliação dafitotoxidez de 18 espécies ocorrentes na restinga de Massambaba, Rio de Janeiro

A Área de Proteção Ambiental de Massambaba concentra diversas formações vegetais com uma grande riqueza florística e endemismos. Infelizmente esta área está sujeita à ação antrópica tanto que alguns fragmentos se encontram degradados. Para recuperar ecologicamente esta vegetação é importante compreender os mecanismos de sucessão ecológica. Como se sabe pouco sobre interações entre plantas de restinga, e menos ainda sob o prisma da alelopatia (efeito negativo que uma planta exerce em outras, ao liberar metabólitos secundários para o seu entorno),objetivou-se a realização de ensaios biológicos com espécies nativas. Inicialmente determinamos as melhores condições de extração de metabólitos, e por fim realizamos bioensaios com 18 espécies (Allagoptera aenaria, Andira legalis, Byrsonima sericea, Clusia fluminensis, Couepia ovalifolia, Erythroxylum ovalifolium, Eugenia copacabanensis, Eugenia selloi, Garcinia brasiliensis, Guapira opposita, Maytenus obtusifolia, Myrsine parvifolia, Neomitranthes obscura, Ocotea notata, Pouteria caimito, Renvoizea trinii, Tocoyena bullata e Vitex megapotamica). A aplicação dos extratos foi sobrea germinação e ocrescimento inicial de sementes de alface. Para isso, folhas destas espécies foram coletadas sazonalmente na formação arbustiva aberta não inundável (fácies alta) na restinga de Massambaba para o preparo de extratos aquosos. Os extratos foram obtidos a através da secagem das folhas à60C para posterior maceração, aquecimento, diluição e filtração, obtendo-se as concentrações de 5 e 10% de concentração (peso/volume). Os parâmetros para avaliar a fitotoxidez foram:a porcentagem ea velocidade de germinação e o comprimento da raiz após sete dias de crescimento em placas de Petri umedecidas com os extratos. Além desses três parâmetros, foi utilizado o índice de efeito global, que transforma as três variáveis em um índice único e uma analise de agrupamento (distância euclidiana, método de Ward) para classificá-las em espécies de fraca, média ou alta fitotoxidez de acordo com o valor do índice. A inibição do crescimento foi observada em todas as espécies, e verificou-se diferenças sazonais significativas, com destaque no inverno. Isso sugere que as diferenças os entre níveis de fitotoxidez estejam correlacionada são ambiente e à genética. Se a ação inibitória das espécies com maior efeito alelopático for comprovada, novas estratégias podem ser elaboradas para a reintrodução em projetos de conservação ambiental

Surimi based dried fish cake

Minced fish prepared from the fillets of the sciaenid fish (Lutjanus sp.) was washed with cold water (<10 °C) three times. The washed muscle was pressed through a piece of fine cloth to a moisture content around 80%. The pressed cake (Surimi) was ground with 2.5% sodium chloride and 3% tapioca starch. The mixed material was shaped in the form of a cake and left for one hour for the gel to set. The cakes were then steamed. The cooled cakes were cut into pieces of 1 cm length x 1 cm width x 0.5 cm thick. The pieces were either dried in an electrical oven at 50°C or dried in sun to a moisture content of 11-12%. Biochemical, bacteriological and organoleptic evaluation revealed that the cakes were in very good acceptable form for 8 months. The cakes could be rehydrated by soaking in water at ambient temperature for half an hour and boiling in water for 10 minutes.

Development of intermediate moisture marinated fish product and its storage characteristics

An attempt was made to prepare an intermediate moisture (around 44% moisture) marinated (pH around 4) fish product. Fillets from Sciaenid fish (each fish weighing 70-80 gm) were dipped in a solution containing 7% acetic acid, 20% common salt and 1% propionic acid for 2 hours. After soaking, the soaked fillets were partially dried to about 44% moisture. Three effective hurdles like low pH (by using 7% acetic add and 1% propionic acid), low water activity (by using 20% salt and partially drying the fillets) and preservative (1% propionic add), were used to prepare a shelf-stable product at room temperature. The dried product was sprayed with 0.0 5% BHA in 50% alcohol and further dried for 10 minutes to remove added water and alcohol, thereby another hurdle (preservative) against fat oxidation. The product was packed in 300 gauge polythene bags and stored in transparent screw cap plastic jars. Fortnightly samples were drawn and subjected to biochemical, bacteriological and organoleptic evaluation to study its storage characteristics. The product was in good acceptable form up to 4 months at ambient temperature. The product needed one hour soaking in water with two changes of water in between to make it free from excess salt and acid smell.

Investigations on wooden floating materials: the loss of buoyancy under continuous immersion in water and the rate of its redemption by drying

A wooden fishing float under immersion in water for long periods is liable to absorb water, the quantity of water absorbed possibly being dependent upon the physical factors like the specific gravity and the inherent property of the material, the time of soaking and the pressure acting on it. Consequently a wooden float is likely to become heavy and loss its original buoyancy. However, when the float is removed from water and dried, the lost buoyancy is regained on complete drying. The present paper is an attempt to elucidate these two important characteristics of some of the chief wooden floating materials used on the West Coast of India.

Ipil-ipil (Leucaena leucocephala) leaves as a plant protein source in prawn diets

Penaeus monodon juveniles were fed diets containing fish meal, shrimp head meal and ipil-ipil leaves soaked and unsoaked, local and peruvian varieties. Mean weight gain at the end of 8 wk was significantly highest among those given the diet containing commercial ipil-ipil leaves. Gain in length followed the same pattern as mean weight gains. Among the diets containing ipil-ipil leaves there was a direct relationship in the amount of mimosine in the diet and the survival rate, the lower the amount of mimosine (due to soaking) the higher the survival rate. The Results thus indicate the beneficial effect of the addition of commercial ipil-ipil leaves to the diets of prawns, providing the mimosine content is kept low by soaking. A reduce in costs is also obtained, since 1kg of shrimp head meal or fish costs more than 2 or 4 tons, respectively, than that of ipil-ipil foliage.

Quality assessment of traditional, rotary and solar tunnel dried small indigenous fish species products

Studies on the quality assessments of three traditional, rotary and solar tunnel dried SIS products were conducted. Organoleptic quality of traditional dried SIS products available in the markets was poor compared to those produced in rotary and solar tunnel dryer. Reconstitution of samples were in the range of 54.26% to 75.24%, 69.37% to 83.73% and 55.08% to 80.24% when soaked at 80°C for traditional, rotary and solar tunnel dried products, respectively. The percentage of reconstitution increased with the increase of soaking time and the uptake of water was maximum after 60 min of soaking. The moisture contents of traditional, rotary and solar tunnel dried products were in the range of 26.02% to 27.33%, 16.23% to 22.84% and 13.71% to 19.30%, respectively. The protein contents were in the range of 60.78% to 72.59%, 62.17% to 76.27% and 61.11% to 76.00%, respectively; lipid contents were in the range of 12.26% to 22.60%, 14.00% to 24.71% and 13.92% to 22.39%, respectively and ash contents in the range of 15.11% to 16.59%, 8.32% to 13.51% and 8.71% to 16.45%, respectively on dry matter basis. The TVB-N content of rotary and solar tunnel dried products was low compared to traditional one ranging from 10.64 to 17.52 mg/100g and 14.34 to 15.68 mg/100g, respectively whereas the TVB-N content of traditional samples was in the range of 15.46 to 20.36 mg/100g. The bacterial load of traditional, rotary and solar tunnel dried products were in the range of 1.43x10 super(8) CFU/g to 2.89 x10 super(80 CFU/g, 1.91x10 super(8) CFU/g to 2.84x10 super(8) CFU/g and 1.95x10 super(8) CFU/g to 2.59x10 super(8) CFU/g, respectively. The results of the study indicated that dried fish products from rotary dryer and solar tunnel dryer were found to be of better quality in nutritional and food quality aspects than those of traditional dried products.

Organoleptic, biochemical and bacteriological aspects of the low cost tunnel dried fish products

Studies were conducted on the organoleptic, biochemical and bacteriological aspects of three dried fish products produced from two different model of low cost solar tunnel dryer. The overall quality of the products obtained from both dryers was excellent. Sixty minutes soaking showed the maximum water reconstitution of the products with values between 66.82 to 75.28% and 71.98 to 78.09% in dryer 1 & 2 respectively. The highest reconstitution was obtained from Silver Jew fish (75.28-78.09%) and lowest from Bombay duck (66.86-71.98%) from both dryers. The average moisture, protein, lipid and ash content of the dried products were 11.8-15.0%, 57.32-68.49%, 6.08-8.62% and 12.25-14.88% respectively in fish in dryer 1 and dryer 2. The TVB-N values were in the range of 24.3 to 30.9 in dryer 1 and 22.1 to 28.2 mg/100 g samples in dryer 2. The highest values were obtained from Bombay duck and lowest value in Silver Jew fish in both dryers. The peroxide values varied from 14.1 to 16.9% in dryer 1 and 13.3 to 16.4% in dryer 2. The highest peroxide value was obtained from Ribbon fish and lowest from Silver Jew fish. Total bacterial load varied in the range of 6.6x10⁴— 8.6x10⁴ CFU/g in dryer 1 and 2.54x10⁴ to 4.9x10⁴ CFU/g in dryer 2. The highest value was obtained from Ribbon fish and lowest from Silver Jew fish.

Biomimetic calcium carbonate-gelatin composites as a model system for eggshell mineralization

The composite nature of mineralized natural materials is achieved through both the microstructural inclusion of an organic component and an overall microstructure that is controlled by templating onto organic macromolecules. A modification of an existing laboratory technique is developed for the codeposition of a CaCO3-gelatin composite with a controllable organic content. First, calibration curves are developed to determine the organic content of a CaCO3-gelatin composite from infrared spectra. Second, a CaCO3-gelatin composite is deposited on either glass coverslips or demineralized eggshell membranes using an automated alternating soaking process. Electron microscopy images and use of the infrared spectra calibration curves show that by altering the amount of gelatin in the ionic growth solutions, the final organic component of the mineral can be regulated over the range of 1-10%, similar to that of natural eggshell. © 2012 Materials Research Societ.

Light-induced changes in diphasic nanocrystalline silicon films and solar cells

A series of diphasic nanocrystalline silicon films and solar cells was prepared using different hydrogen dilution ratios of silane by very high frequency plasma enhanced chemical vapor deposition (VHF-PECVD). It was observed that after light soaking the open circuit voltage (V-oc) of the diphasic solar cells increased, while that of amorphous silicon solar cells decreased. Raman scattering spectroscopy was performed on the series of diphasic silicon films before and after light soaking. It was found that after light soaking the nanostruclures in the diphasic nanocrystalline silicon films were changed. Both the grain sizes and grain volume fraction reduced, while the grain boundary components increased. These results provide experimental evidence for the conjecture that the light-induced increase in V-oc of the diphasic nanocrystalline solar cells might be induced by the changes in the nanostructure of the intrinsic layer. (c) 2006 Elsevier B.V. All rights reserved.

Preparation and characterization of the stable nc-Si/a-Si : H films

High-quality nc-Si/a-Si:H diphasic films with improved stability were prepared by using the plasma-enhanced chemical vapor deposition technology. In comparison with typical amorphous silicon, the diphasic silicon films possess higher photoconductivity (two orders larger than that of the amorphous silicon film) and fairly good photosensitivity(the ratio of the photo-to dark-conductivity is about 10) and higher stability (the degradation of the photoconductivity is less than 10% after 24h long light soaking with 50 mW/cm(2) intensity at room temperature). In addition, the diphasic silicon film has a better light spectra response in the longer wavelength range. The improvement in photoelectronic properties may be attributed to: the existence of the disorder within the amorphous matrix, which breaks the momentum selection rule in the optical transition and, consequently, results in the large light absorption coefficient and high photosensitivity; the improved medium range order and low gap states density. Excess carriers generated in the amorphous matrix tend to recombine in the embedded crystallites, which suppresses nonradiative recombination within the amorphous matrix and reduces the subsequent defect creation.

Transient photoconductivity and its light-induced change of lightly boron-doped a-Si : H films

Transient photoconductivity and its light-induced change were investigated by using a Model 4400 boxcar averager and signal processor for lightly boron-doped a-Si : H films. The transient photoconductivities of the sample were measured at an annealed state and light-soaked states. The transient decay process of the photoconductivity can be fitted fairly well by a second-order exponential decay function, which indicates that the decay process is related with two different traps. It is noteworthy that the photoconductivity of the film increases after light-soaking. This may be due to the deactivity of the boron acceptor B-4(-), and thus some of the boron atoms can no longer act as acceptors and drives E-F to shifts upward. Consequently, the number of effective recombination centers may be reduced and so the photoconductivity increases.

Gap states of hydrogenated amorphous silicon near and above the threshold of microcrystallinity with subtle boron compensation

The effects of hydrogen dilution, subtle boron compensation, and light-soaking on the gap states of hydrogenated amorphous silicon films (a-Si:H) near and above the threshold of microcrystallinity have been investigated in detail by the constant photocurrent method and the improved phase-shift analysis of modulated photocurrent technique. It is shown that high hydrogen dilution near the threshold of microcrystallinity leads to a more ordered network structure and to the redistribution of gap states; it gives rise to a small peak at about 0.55 eV and a shoulder at about 1.2 eV below the conduction band edge, which are associated with the formation of microcrystallites embedded in the amorphous silicon host matrix. A concurrent subtle boron compensation is demonstrated to prevent excessive formation of microcrystallinity, and to help promote the growth of the ordered regions and reduce the density of gap defect states, particularly those associated with microcrystallites. Hydrogen-diluted and appropriately boron-compensated a-Si:H films deposited near the threshold of microcrystallinity show the lowest density of the defects in both the annealed and light-soaked states, and hence, the highest performance and stability. (C) 2001 American Institute of Physics.