998 resultados para SO(2)
Resumo:
An uncommon coordination protocol induced by the p-tolylsulfonyl dithiocarbimate ligand (L) [L = p-CH(3)C(6)H(4)SO(2)N CS(2)(2-)] in conjunction with PPh(3) allowed the formation of novel homodimetallic, Cu(2)(PPh(3))(4)L (1), trinuclear heterometallic Cu(2)Ni(L)(2)(PPh(3))(4) (2) and heteroleptic complexes of general formula cis-[M(PPh(3))(2)L] [M = Pd(II) (3), Pt(II) (4)]. The complexes have been characterized by microanalysis, mass spectrometry, IR, (1)H, (13)C and (31)P NMR and electronic absorption spectra and single-crystal X-ray crystallography. 2 uniquely consists of square planar, trigonal planar and tetrahedral coordination spheres within the same molecule. In both heteroleptic complexes 3 and 4 the orientation of aromatic protons of PPh(3) ligand towards the Pd(II) and Pt(II) center reveals C-H center dot center dot center dot Pd and C-H center dot center dot center dot Pt rare intramolecular anagostic or preagostic interactions. These complexes exhibit photoluminescent properties in solution at room temperature arising mainly from intraligand charge transfer (ILCT) transitions. The assignment of electronic absorption bands has been corroborated by time dependent density functional theory (TD-DFT) calculations. Complexes 1 and 2 with sigma(rt) values similar to 10(-6) S cm(-1) show semi-conductor properties in the temperature range 313-403 K whereas 3 and 4 exhibit insulating behaviour.
Resumo:
Background: Acute respiratory distress syndrome (ARDS) is a frequent respiratory disturbance in preterm newborns. Preceding investigations evaluated chronic physiotherapy effects on newborns with different lung diseases; however, no study analyzed acute physiotherapy treatment on premature newborns with ARDS. In this study we aimed to evaluate the acute effects of chest and motor physiotherapy treatment on hemodynamic variables in preterm newborns with ARDS. Methods: We evaluated heart rate (HR), respiratory rate (RR), systolic (SAP), mean (MAP) and diastolic arterial pressure (DAP), temperature and oxygen saturation (SO(2)%) in 44 newborns with ARDS. We compared all variables between six periods in one day: before first physiotherapy treatment vs. after first physiotherapy treatment vs. before second physiotherapy treatment vs. after second physiotherapy treatment vs. before third physiotherapy treatment vs. after third physiotherapy treatment. Variables were measured 2 minutes before and 5 minutes after each physiotherapy session. We applied Anova one way followed by post hoc Bonferroni test. Results: HR (147.5 +/- 9.5 bpm vs. 137.7 +/- 9.3 bpm; p<0.001), RR (45.5 +/- 8.7cpm vs. 41.5 +/- 6.7 cpm; p=0.001), SAP (70.3 +/- 10.4 mmHg vs. 60.1 +/- 7.1 mmHg; p=0.001) and MAP (55.7 +/- 10 mmHg vs. 46 +/- 6.6 mmHg; p=0.001) were significantly reduced after the third physiotherapy treatment compared to before the first session. There were no significant changes regarding temperature, DAP and SO(2) %. Conclusion: Chest and motor physiotherapy acutely improves HR, RR, SAP, MAP and SO(2) % in newborns with ARDS.
Resumo:
A rational strategy was employed for design of an orthorhombic structure of lamivudine with maleic acid. On the basis of the lamivudine saccharinate structure reported in the literature, maleic acid was chosen to synthesize a salt with the anti-HIV drug because of the structural similarities between the salt formers. Maleic acid has an acid-ionization constant of the anti first proton and an arrangement of their hydrogen bonding functionalities similar to those of saccharin. Likewise, there is a saccharin-like conformational rigidity in maleic acid because of the hydrogen-bonded ring formation and the Z-configuration around the C=C double bond. As was conceivably predicted, lamivudine maleate assembles into a structure whose intermolecular architecture is related to that of saccharinate salt of the drug. Therefore, a molecular framework responsible for crystal assembly into a lamivudine saccharinate-like structure could be recognized in the salt formers. Furthermore, structural correlations and structure-solubility relationships were established for lamivudine maleate and saccharinate. Although there is a same molecular framework in maleic acid and saccharin, these salt formers are Structurally different in some aspects. When compared to saccharin, neither out-of-plane SO(2) oxygens nor a benzene group occur in maleic acid. Both features could be related to higher solubility of lamivudine maleate. Here, we also anticipate that multicomponent molecular crystals of lamivudine with other salt formers possessing the molecular framework responsible for crystal assembly can be engineered successfully.
Resumo:
Five new complexes of general formula: [Ni(RSO(2)N=CS(2))(dppe)], where R = C(6)H(5) (1), 4-ClC(6)H(4) (2), 4-BrC(6)H(4) (3), 4-IC(6)H(4) (4) and dppe = 1,2-bis(diphenylphosphino) ethane and [Ni(4-IC(6)H(4)SO(2)N=CS(2))(PPh(3))(2)] (5), where PPh3 = triphenylphosphine, were obtained in crystalline form by the reaction of the appropriate potassium N-R-sulfonyldithiocarbimate K(2)(RSO(2)N=CS(2)) and dppe or PPh(3) with nickel(II) chloride in ethanol/water. The elemental analyses and the IR, (1)H NMR, (13)C NMR and (31)P NMR spectra are consistent with the formation of the square planar nickel(II) complexes with mixed ligands. All complexes were also characterized by X-ray diffraction techniques and present a distorted cis-NiS(2)P(2) square-planar configuration around the Ni atom. Quantum chemical calculations reproduced the crystallographic structures and are in accord with the spectroscopic data. Rare C-H center dot center dot center dot Ni intramolecular short contact interactions were observed in the complexes 1-5. (C) 2011 Elsevier B. V. All rights reserved.
Resumo:
The vibrational spectroscopic characterization of a sulfur dioxide visual sensor was carried out using a Raman microscope system. It was observed the formation of two distinct complexes, that were characterized by the position and relative intensities of the bands assigned to the symmetric stretching, nu(s)(SO(2)),of the linked SO(2) molecules. In fact, in the yellowish orange complex, that corresponds to the 1:1 stoichiometry, only one band is observed, assigned to nu(s)(SO(2)) at ca. 1080 cm-(1) and, in the deep red complex, that corresponds to the 1:2 complex, at ca. 1070 and 1090 cm(-)1 are observed. The variation of the relative intensities of the bands assigned to nu(s)(SO(2)) present in the Ni(II)center dot SO(2) complex, in different points of the sample, shows clearly the requirement of the Raman microscope in the vibrational characterization of this kind of molecular sensor. (C) 2008 Elsevier B.V. All rights reserved.
Resumo:
The analysis of the IR carbonyl band of the alpha-methylsulfonyl-alpha-diethoxyphosphoryl p-substituted acetophenones p-Y-Ph-C(O)CH(SO(2)Me)[P(O)(OEt)(2)] (Y = OMe 1, H 2, F 3, Cl 4, Br 5 and NO(2) 6) supported by HF/6-31G(d,p) ab initio calculations of the alpha-methylsulfonyl-alpha-diethoxyphosphoryl acetophenone 2, indicated the existence of a single stable cl conformer in gas phase and in solvents of increasing polarity, along with the presence of second less stable conformation in gas phase. The cl conformer present the (SO(2)Me) group and the [P(O)(OEt(2))] groups in a syn-clinal (gauche) geometry and is stabilised through of the 0(`60)... P(%), 01NO(owl Crco), ONO)... C(,C*.), 060)... S(`S`02.,) and 0(`S-02) q o) electronic interactions 08along with H(8S*o2M,). 0(660). HU(5C_H2)lP0Erl- 0(8so2m), H(6 +Ph)- - - (co) and H(8o+`-Ph). 0( `Po) intramolecular hydrogen bonds. The almost co nstant negative carbonyl frequency shifts (Av) for the title compounds 1-6 with respect to the parent acetophenones 7-14 corroborates the prevalence of the electronic interactions over the -l(y inductive effect of the ot-substituents for the title compounds and gives strong support for the existence of the crossed 0`(`C-O)... S`(1S+02m,) and 0(""S-02) C(`C+O) (charge transfer and electrostatic); 08-) (co P(`i o) and 01`M-OFt)l C(` o), (electrostatic) interactions. 0 2008 Elsevier B.V. All rights reserved.
Resumo:
The effect of adding SO(2) on the structure and dynamics of 1-butyl-3-methylimidazolium bromide (BMIBr) was investigated by low-frequency Raman spectroscopy and molecular dynamics (MD) simulations. The MD simulations indicate that the long-range structure of neat BMIBr is disrupted resulting in a liquid with relatively low viscosity and high conductivity, but strong correlation of ionic motion persists in the BMIBr-SO(2) mixture due to ionic pairing. Raman spectra within the 5 < omega < 200 cm(-1) range at low temperature reveal the short-time dynamics, which is consistent with the vibrational density of states calculated by MD simulations. Several time correlation functions calculated by MD simulations give further insights on the structural relaxation of BMIBr-SO(2).
Resumo:
A comparative study of two different conductive carbon-black pigments, Vulcan XC-72 R and Printex L6, for the electrogeneration of hydrogen peroxide (H(2)O(2)) by reducing dissolved oxygen in an alkaline solution was performed. The materials were physically characterized by X-ray diffraction (XRD), Fourier transform infrared attenuated total reflection (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS). XRD shows the presence of SO(2) and ATR-FTIR technique indicates a difference in NO and SO(2) functional groups between the two carbon pigments. XPS indicated presence of SO and NO and more oxygenated acid species on Printex L6. A rotating ring-disk electrode was used for electrochemical analysis of the oxygen reduction reaction (ORR). The results showed that the Printex L6 was better than Vulcan XC-72 R for H(2)O(2) production. Results also indicate that the number of electrons transferred in the ORR for Printex L6 and Vulcan XC-72 R were 2.2 and 2.9, respectively, while the percentages of H(2)O(2) formed were 88% and 51%. Scanning electrochemistry microscopy images confirmed the higher amount of H(2)O(2) formed in the Printex L6 pigment. Printex L6 was shown to be a more promising for H(2)O(2) production than Vulcan XC-72 R, while the latter was shown to have more potential for fuel cells. (C) 2011 Elsevier Ltd. All rights reserved.
Resumo:
The Library Media Resources Center is happy to publish this revised Listing of Faculty Publications. As you recall, the first edition was issued in 1979 and so, 2 1/2 years later, it is our pleasure to present a larger and more complete edition... Special thanks to Professor Albert Talero who did all the editing and arrangements for the publication. Thanks also to Professor Fred Low for making the TRS-80 wordprocessing facilities of the LaGuardia Automated Library System (LALS) available for this edition. --Ngozi Agbim, April 23, 1982; 51 p.
Resumo:
Este trabalho tem por objetivo, estudar a dispersão de poluentes na região da Usina Termelétrica Presidente Médici (UTPM), localizada no município de Candiota-RS, utilizando a modelagem numérica (mais especificamente o modelo ISCST - Industrial Surce Complex Term Short Term) e relacionar o seu comportamento com as condições meteorológicas. Esse modelo de dispersão utilizado é recomendado pela EPA (Environmental Protection Agency) para tratamento de dispersão de poluentes emitidos por fontes industriais como refinarias, termelétricas, siderúrgicas, etc. O período de estudo foi de 19/01/03 à 28/01/03, quando se realizou a primeira campanha experimental, pertencente ao projeto "Estudo Ambiental Aplicando a Modelagem Numérica na Região de Candiota-RS". Os resultados simulados pelo modelo foram comparados com os dados das concentrações de Material Particulado (MP) e Dióxido de Enxofre (SO 2 ), medidos através dos pontos receptores em duas estações de qualidade do ar próximas à Usina Termoelétrica. Uma correlação entre as concentrações de poluentes modelados e os dados coletados foi realizada, assim como, uma comparação com os padrões de qualidade do ar estipulados CONAMA (Conselho Nacional do Meio Ambiente). Os resultados denotam que o modelo ISCST subestima as concentrações de MP e SO 2 observadas nas estações de qualidade do ar, o que provavelmente ocorre, devido à presença de outras fontes de emissão (como indústrias de cimento e calcário) nas proximidades das estações. A situação com a melhor correlação nos dez dias, entre modelo e amostrador, apresentou-se com 90%. Em apenas um dos dez dias, foi excedido o padrão secundário (100 m g/m 3 ) com o poluente SO 2 , caracterizado a qualidade do ar da região como boa para esse período.
Resumo:
Introdução Este presente estudo tem em sua introdução uma revisão de literatura sobre temas pertinentes à infecção por HIV. Começa pela epidemiologia, transmissão, diagnóstico e estágios clínicos da doença; revisa artigos sobre qualidade de vida em pessoas que vivem com HIV/AIDS (PVHAs) e finaliza com uma descrição breve do desenvolvimento do instrumento WHOQOL-HIV pela Organização Mundial da Saúde. Objetivos O objetivo principal deste estudo é (1) medir a qualidade de vida em indivíduos soropositivos brasileiros usando o World Health Organization Quality of Life instrument – HIV/AIDS module (WHOQOL-HIV) - versão com 128 itens - em uma amostra brasileira e avaliar as propriedades psicométricas deste instrumento. Os objetivos secundários são: (2) avaliar a relação entre depressão, ansiedade e qualidade de vida - dados empíricos indicam que sintomas mentais podem interferir na qualidade de vida de PVHAs - e (3) avaliar o desempenho de um dos instrumentos genéricos mais usados para avaliar qualidade de vida em PVHAs, o Medical Outcomes Study 36-Item Short-Form Health Survey (SF-36), comparando-o com outro instrumento genérico, o WHOQOL-100. Métodos Em Porto Alegre/RS, foi avaliada a qualidade de vida de pessoas que vivem com PVHIV usando o WHOQOL-HIV e o SF-36 em uma amostra selecionada por conveniência de 308 homens e mulheres infectados pelo HIV em diferentes estágios da infecção: assintomáticos (n=131), sintomáticos (n=91) e AIDS (n=86). Foram estudadas as propriedades psicométricas do WHOQOL-HIV: confiabilidade, consistência interna e as validades de construto, discriminante e concorrente. Foram medidos também os sintomas de depressão pelo Inventário de Beck para Depressão (Beck Depression Inventory, BDI) e os sintomas de ansiedade pelo Inventário de Ansiedade Traço-Estado (IDATE). As características sociodemográficas da amostra também foram analisadas. Resultados e Conclusões Os resultados deste estudo são apresentados na forma de 3 artigos. No primeiro deles, observou-se desempenho satisfatório do WHOQOL-HIV em relação às propriedades psicométricas. A confiabilidade foi medida pelo alfa de Cronbach, o qual revelou valores acima de 0,70 em 27 das 31 facetas do WHOQOL-HIV, variando entre 0,32 e 0,65 nas demais; a validade discriminante foi evidenciada com o instrumento identificando piores escores de qualidade de vida para a fase AIDS em todos os domínios; a validade concorrente foi analisada através da correlação dos domínios do WHOQOLHIV com Qualidade de Vida Geral (uma faceta do próprio WHOQOL-HIV), sendo que todos os coeficientes de correlação de Pearson foram superiores a 0,50 (p<0,01). Concluise que o WHOQOL-HIV discriminou bem a qualidade de vida entre os estágios da infecção do HIV na direção esperada e demonstrou confiabilidade e validade concorrente satisfatórias nesta amostra de brasileiros HIV-positivos. Este instrumento parece ser útil para detectar aspectos subjetivos da vida das pessoas que vivem com HIV/AIDS. No segundo artigo, o objeto de estudo foi a relação entre qualidade de vida em PVHIV e os sintomas de depressão e ansiedade. Não houve diferenças significativas quanto à presença de ansiedade entre as fases da infecção, entretanto, houve maiores escores de depressão no estágio AIDS quando comparado com os assintomáticos e sintomáticos. Na correlação do BDI com os domínios do WHOQOL-HIV, os valores dos coeficientes de Pearson foram superiores a 0,30 (magnitude moderada a muito grande, pela escala de Magnitude de Efeito), enquanto a sub-escala IDATE-Traço apresentou coeficientes de valores mais baixos (magnitudes pequena a moderada) quando correlacionada com os domínios do WHOQOL-HIV. Ajustando para estágios da doença, variáveis clínicas e variáveis sociodemográficas em um modelo de regressão linear múltipla, o BDI apresentou valores de coeficiente beta expressivamente maiores que todas as demais variáveis. Os dados deste trabalho indicam que a qualidade de vida de PVHAs é afetada por outras variáveis que não apenas os estágio da doença, principalmente a depressão. Finalmente, no terceiro artigo, é apresentada a comparação entre o WHOQOL-HIV e o SF-36. Tanto o WHOQOL-100 como o SF-36 discriminaram bem a qualidade de vida entre os estágios da infecção na direção esperada: na comparação com os estágios assintomático e sintomático, o estágio AIDS apresentou escores significativamente inferiores. Isto só não aconteceu em dois domínios do WHOQOL-HIV, Meio Ambiente e Espiritualidade, os quais discriminaram apenas entre os pacientes com AIDS e sintomáticos. Estes domínios provavelmente não tenham uma relação linear com a evolução da doença. Como estes domínios são os domínios que se distanciam mais em seu construto do conceito de “funcionamento” e “incapacitação” talvez explique a menor sensibilidade em captar diferenças entre os diferentes estágios da doença. Já os domínios do SF-36, uma medida que tem uma ênfase em todos os seus domínios no “status funcional” parece ter captado com mais sensibilidade estas diferenças. Nas correlações com BDI ambos apresentaram coeficientes de Pearson com valores de magnitude moderada a grande; já com a sub-escala IDATE-Traço as correlações dos dois instrumentos foram de magnitudes menores, variando de pequena a moderada. Na correlação direta dos dois instrumentos entre si os oito domínios do SF-36 correlacionaram-se mais fortemente com três domínios do WHOQOL-100 (Físico, Psicológico e Nível de Independência). Constatou-se neste estudo que o SF-36 confirma sua característica de avaliar “status funcional”, enquanto o WHOQOL-100 demonstra ser um instrumento de qualidade de vida com construtos mais abrangentes.
Resumo:
Nos solos com restrições físicas e, ou, físico-hídricas ao crescimento de raízes, aumentar o potencial de armazenagem de água por meio de melhorias na infiltração pode ser uma estratégia viável para aumento da produtividade das culturas. Nesse sentido, este trabalho teve como objetivo avaliar a infiltração de água em um Nitossolo Vermelho distrófico, com três sistemas de rotação de culturas sob semeadura direta com e sem escarificação inicial. O sistema de rotação de culturas constou de: (1) milheto/soja/sorgo/milho/sorgo (M/S/So/Mi/So), (2) milheto/soja/Brachiaria ruziziensis/milho/Brachiaria ruziziensis (M/S/B/Mi/B) e (3) milheto/soja/Brachiaria ruziziensis + mamona/milho/Brachiaria ruziziensis + mamona (M/S/B+Ma/Mi/B+Ma). A infiltração de água no solo foi avaliada em campo com anéis concêntricos instalados na superfície, a 0,10 e 0,20 m de profundidade, em 2006 e 2007. Após o primeiro ano, o manejo com escarificação inicial do solo apresentou a maior infiltração de água. A rotação Brachiaria ruziziensis + mamona proporcionou maior infiltração da água no solo. A atividade do sistema radicular das espécies nas parcelas sem escarificação inicial aumentou a velocidade de infiltração da água no solo.
Ecological impacts from syngas burning in internal combustion engine: Technical and economic aspects
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
This paper evaluates and quantifies the environmental impact resulting from the combination of biodiesel fuel (pure or blended with diesel), and diesel combustion in thermoelectric power plants that utilize combined cycle technology (CC). In regions without natural gas, the option was to utilize diesel fuel; the consequence would be a greater emission of pollutants. Biodiesel is a renewable fuel which has been considerably interesting in Brazil power matrix in recent years. The concept of ecological efficiency, largely evaluates the environmental impact caused by CO(2), SO(2), NO(x) and particle matter (PM) emissions. The pollution resulting from biodiesel and diesel combustion is analyzed, separately considering CO(2), SO(2), NO(x) and particulate matter gas emissions, and comparing them international standards currently used regarding air quality. It can be concluded that it is possible to calculate the qualitative environmental factor, and the ecological effect, from a thermoelectric power plant utilizing central heat power (CHP) of combined cycle. The ecological efficiency for pure biodiesel fuel (B100) is 98.16%; for biodiesel blended with conventional diesel fuel, B20 (20% biodiesel and 80% diesel) is 93.19%. Finally, ecological efficiency for conventional diesel is 92.18%, as long as a thermal efficiency of 55% for thermoelectric power plants occurs. Crown Copyright (C) 2009 Published by Elsevier Ltd. All rights reserved.
Resumo:
This paper evaluates and quantifies the environmental impact from the use of some renewable fuels and fossils fuels in internal combustion engines. The following fuels are evaluated: gasoline blended with anhydrous ethyl alcohol (anhydrous ethanol), conventional diesel fuel, biodiesel in pure form and blended with diesel fuel, and natural gas. For the case of biodiesel, its complete life cycle and the closed carbon cycle (photosynthesis) were considered. The ecological efficiency concept depends on the environmental impact caused by CO(2), SO(2), NO(x) and particulate material (PM) emissions. The exhaust gases from internal combustion engines, in the case of the gasoline (blended with alcohol), biodiesel and biodiesel blended with conventional diesel, are the less polluting; on the other hand, the most polluting are those related to conventional diesel. They can cause serious problems to the environment because of their dangerous components for the human, animal and vegetable life. The resultant pollution of each one of the mentioned fuels are analyzed, considering separately CO(2), SO(2), NO(x) and particulate material (PM) emissions. As conclusion, it is possible to calculate an environmental factor that represents, qualitatively and quantitative, the emissions in internal combustion engines that are mostly used in urban transport. Biodiesel in pure form (B100) and blended with conventional diesel as fuel for engines pollute less than conventional diesel fuel. The ecological efficiency for pure biodiesel (B100) is 86.75%: for biodiesel blended with conventional diesel fuel (B20, 20% biodiesel and 80% diesel), it is 78.79%. Finally, the ecological efficiency for conventional diesel, when used in engines, is 77.34%; for gasoline, it is 82.52%, and for natural gas, it is 91.95%. All these figures considered a thermal efficiency of 30% for the internal combustion engine. Crown Copyright (C) 2008 Published by Elsevier Ltd. All rights reserved.