Caracterização de antenas planares com substrato metamaterial

This work presents a theoretical and numerical analysis for the radiation characteristics of rectangular microstrip antenna using metamaterial substrate. The full wave analysis is performed in the Fourier transform domain through the application of the Transverse Transmission Line - TTL method. A study on metamaterial theory was conducted to obtain the constructive parameters, which were characterized through permittivity and permeability tensors to arrive at a set of electromagnetic equations. The general equations for the electromagnetic fields of the antenna are developed using the Transverse Transmission Line - TTL method. Imposing the boundary conditions, the dyadic Green s function components are obtained relating the surface current density components at the plane of the patch to the electric field tangential components. Then, Galerkin s method is used to obtain a system of matrix equations, whose solution gives the antenna resonant frequency. From this modeling, it is possible to obtain numerical results for the resonant frequency and return loss for different configurations and substrates

Predicao de campo em comunicacao sem fio

Even living in the XXI century are still some difficulties in access to broadband Internet in several Brazilian cities, due to the purchasing power of people and lack of government investment. But even with these difficulties, we seek to encourage the use of wireless technology, which is based on the IEEE 802.11b protocol - also known as Wi-Fi (Wireless Fidelity) Wireless Fidelity Communications, having wide range of commercial applications in the world market, nationally and internationally. In Brazil, this technology is in full operation in major cities and has proved attractive in relation to the access point to multipoint and point-to-point. This paper is a comparative analysis of prediction field, using models based on the prediction of propagation loss. To validate the techniques used here, the Okumura-Hata models, modified Okumura-Hata, Walfisch-Ikegami model, were applied to a wireless computer network, located in the neighborhood of Cajupiranga in the city of Melbourn, in Rio Grande do Norte . They are used for networking wireless 802.11b, using the Mobile Radio to measure signal levels, beyond the heights of the antennas and distances from the transmitter. The performance data versus distance are added to the graphs generated and compared with results obtained through calculations of propagation models

Método dinâmico aplicado para antenas cilíndricas

Nowadays there has been a major breakthrough in the aerospace area, with regard to rocket launches to research, experiments, telemetry system, remote sensing, radar system (tracking and monitoring), satellite communications system and insertion of satellites in orbit. This work aims at the application of a circular cylindrical microstrip antenna, ring type, and other cylindrical rectangular in structure of a rocket or missile to obtain telemetry data, operating in the range of 2 to 4 GHz, in S-band. Throughout this was developed just the theoretical analysis of the Transverse transmission line method which is a method of rigorous analysis in spectral domain, for use in rockets and missiles. This analyzes the spread in the direction "ρ" , transverse to dielectric interfaces "z" and "φ", for cylindrical coordinates, thus taking the general equations of electromagnetic fields in function of e [1]. It is worth mentioning that in order to obtain results, simulations and analysis of the structure under study was used HFSS program (High Frequency Structural Simulator) that uses the finite element method. With the theory developed computational resources were used to obtain the numerical calculations, using Fortran Power Station, Scilab and Wolfram Mathematica ®. The prototype was built using, as a substrate, the ULTRALAM ® 3850, of Rogers Corporation, and an aluminum plate as a cylindrical structure used to support. The agreement between the measured and simulated results validate the established processes. Conclusions and suggestions are presented for continuing this work

Análise e projeto de superfícies seletivas em frequência multibanda e/ou banda larga

Frequency selective surfaces (Frequency Selective Surface - FSS) are often used in various applications in telecommunications. Some of these applications may require that these structures have response with multiple resonance bands. Other applications require that the FSS response have large frequency range, to meet the necessary requirements. FSS to design with these features there are numerous techniques cited in the scientific literature. Thus, the purpose of this paper is to examine some common techniques such as: Overlap of FSS; Elements combined; Elements Elements convolucionados and fractals. And designing multiband FSS and / or broadband selecting simple ways in terms of construction and occupy the smallest possible space, aiming at practical applications. Given these requirements, three projects FSS were performed: a technology applied to IEEE 802.11 a/b/g/n and two projects for application in UWB. In project development, commercial software Ansoft DesignerTM and experimental results were satisfactory was used

Desempenho de pontas de pulverização na deposição de gotas de pulverização na cultura do amendoim

The objective of this study was to evaluate the effect of nozzles on spray droplet deposition in the peanut crop cultivar 'Runner IAC 886'. The study was conducted in the field, and the applications of treatments performed in the vegetative stage (V1) and reproductive (R2). It was used the Brilliant Blue FDC - 1 as tracer in water solution, at 500 ppm. The treatments consisted of seven spray nozzle XR 110015 VS (150 L ha(-1)), XR 11002 VS (200 L ha(-1)), TX-VK 6 (150L ha(-1)), TX-VK 8 (200 L ha-1), AI 110015 VS (150 L ha(-1)), AI11002 VS (200 L ha(-1)) e TJ60 11002 VS (150 e 200 L ha(-1)). It was used a randomized blocks design, with four replications. After application, plants were immediately collected, and washed in 100 mL of distilled water for posterior tracer quantification in spectrophotometer. The data had been adjusted a regression curve for Gompertz model. The results had evidenced that at low volumes of application the nozzle AI 110015 VS and TJ60 11002 VS, were the ones with best distribution uniformity of spray on plants of peanut cultivar 'Runner IAC 886' in the vegetative stage (V1) and reproductive (R2) respectively, and the largest deposits and higher percentage of failures in applications have been found in younger plants by comparing the growth stages of application, regardless of the spray nozzle and volume.

Interferência do hipoclorito de sódio na absorção de macro e micronutrientes nas culturas da soja e do feijão

The objective of this work was to evaluate the effect of the sodium hypochlorite application in different levels in the fresh and dry biomass and in the uptake of macronutrients and micronutrients in plants of soybean and bean. The experiments were carried at the greenhouse of the "Departamento de Recursos Naturais/Ciência do Solo, FCA/UNESP, Botucatu/SP", in columns of rigid PVC with capacity to 1.0 liter of soil. The experimental design used in each experiment was entirely randomized, with 4 replications. The treatments in each experiment were constituted of 5 doses of sodium hypochlorite (0.0, 0.5, 1.0, 2.0 and 4.0 L ha(-1)). The following parameters were evaluated: fresh and dry biomass, macro and micronutrients contents in the plants leaves. The levels of sodium hypochlorite did not reflect significantly on the fresh and dry biomass of soybean and bean. The soybean dry biomass presented significant difference among the level of sodium hypochlorite. Average contents of macro and micronutrients obtained in bean leaves were not affected by the levels of sodium hypochlorite. The sulphur contents in soybean leaves presented significant difference. The sodium hypochlorite did not affect negatively the macro and micronutrients contents in leaves of soybean and bean.

Physicochemical Characterization and Development of a Microemulsion System for Transdermal Use

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Structural and Electronic Effects of Incorporating Mn in TiO2 Films Grown by Sputtering: Anatase versus Rutile

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Structural and optical properties of chlorinated plasma polymers

Amorphous hydrogenated chlorinated carbon (a-C:H:Cl) films were produced by the plasma polymerization of chloroform-acetylene-argon mixtures in a radiofrequency plasma enhanced chemical vapor deposition system. The main parameter of interest was the proportion of chloroform in the feed, R(C), which was varied from 0 to 80%. Deposition rates of 80 nm min (1) were typical for the chlorinated films. Infrared reflection-absorption spectroscopy revealed the presence of C-Cl groups in all the films produced with chloroform in the feed. X-ray photoelectron spectroscopy confirmed this finding, and revealed a saturation of the chlorine content at similar to 47 at.% for R(C)>= 40%. The refractive index and optical gap, E(04), of the films were roughly in the 1.6 to 1.7, and the 2.8 to 3.7 eV range. These values were calculated from transmission ultraviolet-visible-near infrared spectra. Chlorination leads to an increase in the water surface contact angle from similar to 40 degrees to similar to 77 degrees. (C) 2011 Elsevier B.V. All rights reserved.

Enhancement of optical absorption by modulation of the oxygen flow of TiO2 films deposited by reactive sputtering

Oxygen-deficient TiO2 films with enhanced visible and near-infrared optical absorption have been deposited by reactive sputtering using a planar diode radio frequency magnetron configuration. It is observed that the increase in the absorption coefficient is more effective when the O-2 gas supply is periodically interrupted rather than by a decrease of the partial O-2 gas pressure in the deposition plasma. The optical absorption coefficient at 1.5 eV increases from about 1 x 10(2) cm(-1) to more than 4 x 10(3) cm(-1) as a result of the gas flow discontinuity. A red-shift of similar to 0.24 eV in the optical absorption edge is also observed. High resolution transmission electron microscopy with composition analysis shows that the films present a dense columnar morphology, with estimated mean column width of 40nm. Moreover, the interruptions of the O-2 gas flow do not produce detectable variations in the film composition along its growing direction. X-ray diffraction and micro-Raman experiments indicate the presence of the TiO2 anatase, rutile, and brookite phases. The anatase phase is dominant, with a slight increment of the rutile and brookite phases in films deposited under discontinued O-2 gas flow. The increase of optical absorption in the visible and near-infrared regions has been attributed to a high density of defects in the TiO2 films, which is consistent with density functional theory calculations that place oxygen-related vacancy states in the upper third of the optical bandgap. The electronic structure calculation results, along with the adopted deposition method and experimental data, have been used to propose a mechanism to explain the formation of the observed oxygen-related defects in TiO2 thin films. The observed increase in sub-bandgap absorption and the modeling of the corresponding changes in the electronic structure are potentially useful concerning the optimization of efficiency of the photocatalytic activity and the magnetic doping of TiO2 films. (C) 2012 American Institute of Physics. [http://dx.doi.org/10.1063/1.4724334]

Atributos físicos do solo e produtividade de soja em sistema de consórcio milho e braquiária

Em virtude das altas taxas de decomposição do material orgânico em regiões tropicais, um dos problemas para a manutenção e sustentabilidade do sistema de plantio direto é a necessidade de produção de grandes quantidades de palha. Com o objetivo de identificar, no sistema de integração agricultura-pecuária, as variações dos atributos físicos do solo e a produtividade de grãos de soja sobre palhada de braquiárias, este trabalho foi conduzido na FEPE-UNESP de Ilha Solteira, SP, e o delineamento experimental utilizado foi o de blocos ao acaso, com nove tratamentos em esquema fatorial (3 x 3), com quatro repetições. Os tratamentos foram constituídos por três espécies de braquiárias e três modalidades de consórcio das braquiárias com o milho. Os atributos físicos foram determinados antes da implantação do projeto de pesquisa, após a colheita do milho consorciado com as forrageiras e depois da colheita da soja. Na safra de verão a cultura da soja foi semeada sobre a palhada dos consórcios de milho com braquiárias, no espaçamento de 0,45 m, com 14 linhas por parcela e área útil correspondente às 4 linhas centrais de 5 m cada uma. Os resultados permitiram concluir que a consorciação e a sequência de culturas proporcionaram aumento na macroporosidade e porosidade total do solo. A Brachiaria brizantha semeada na época de adubação de cobertura do milho e a Brachiaria decumbens, na linha do milho, promoveram maiores valores de produtividade de grãos de soja.

Consórcio de Urochloas com milho em sistema plantio direto

Uma alternativa para suprir o aporte anual de palha exigido para manutenção do sistema plantio direto (SPD), nas regiões tropicais, é o cultivo de milho consorciado com urochloas. Com o objetivo de identificar o melhor sistema de cultivo de duas espécies forrageiras (Urochloa brizantha e Urochloa ruzizienses) em consórcio com o milho (Zea mays L.) em sistema plantio direto, foi realizada a presente pesquisa. O milho foi semeado em consórcio com as forrageiras em cinco sistemas de cultivo. Foi utilizado o delineamento em blocos ao acaso, em esquema fatorial (2x4+1), com quatro repetições. Foram avaliadas: massa seca de palha do milho, massa seca da palha de urochloa, massa seca total de palha, população de plantas de milho, massa de 1000 grãos e produtividade de grãos. Os resultados demonstraram que o consórcio de milho com urochloa não apresentou efeito negativo na produtividade do milho e incrementou o aporte de matéria seca no sistema de produção sob plantio direto. A escolha de determinado sistema de cultivo depende do gerenciamento e da disponibilidade de máquinas, visto que todos os sistemas apresentaram comportamento positivo em relação à produtividade de grãos e à produção de palhada.

Farelo de trigo na alimentação de poedeiras semipesadas na fase de recria

O estudo foi conduzido com o objetivo de avaliar os efeitos da inclusão de farelo de trigo (FT) na ração sobre o desempenho de frangas semipesadas nas fases de recria 1 (7 a 14 semanas de idade) e recria 2 (15 a 19 semanasde idade) e seu efeito residual durante a fase inicial de produção de ovos. Foram utilizadas 160 frangas Lohmann Brown distribuídas em delineamento inteiramente casualizado, com quatro níveis de FT na ração: 0 (controle), 10, 20 e 30%, que resultaram em quatro tratamentos, com cinco repetições de oito aves na fase de recria 1. Ao completarem 14 semanas, as aves foram transferidas para gaiolas de arame galvanizado, redistribuídas em seis repetições de seis aves. Utilizaram-se 144 aves e descartaram-se, aleatoriamente, quatro aves por tratamento, constituindo a fase de recria 2. A adição de FT diminuiu linearmente o peso vivo final e o ganho de peso, resultando em reduções de 1,15 e 0,03 g, respectivamente, para cada 1% de inclusão de FT na ração. O consumo de água aumentou de forma quadrática e cresceu, em valores absolutos, com o aumento de 0 a 30% de farelo de trigo. A cada aumento de 1% de FT na ração, a idade das aves ao primeiro ovo elevou aproximadamente 0,6 dia e o peso do ovo em 0,22 g. A inclusão de farelo de trigo na ração reduz a taxa de crescimento de frangas, atrasa o início da postura, mas melhora o peso inicial dos ovos em relação a dietas à base de milho e de farelo de soja.

Contribution to the study of aortic mural structure of opossum (Didelphis albiventris)

Opossum is considered one of the most primitive mammals, with transition evolutive characteristics. In mammals, the aorta artery is referred as the main body blood vessel. The arteries wall structural organization follows a basic pattern, being contituted of three tunics: Intima, Median and Adventicial. After euthanasia, three samples of opossum had segments from the aorta artery ascendent, thoracic descending and abdominal descending portions removed, fixed in phormalin at 10% for 48 hours. Then, the material was washed in alcohol 70% several times, dehydrated in alcohois of growing concentrations, diafanized in xylol and included in "paraplast". Cuts with 5 to 7 mu m of thickness were placed in histological laminae and submitted to color methods of Hematoxilin-Eosin, Masson, Mallory and Calleja Tricromics. It was observed that in the different portions ascendent, thoracic and abdominal descending of aorta, the intima tunic presents much thick, made up of a layer of smooth muscular cells and elastic fibers, forming a limiting internal elastic membrane. In the three portions studied, the median tunic was the most evident layer, constituted of colagen fibers, smooth muscular cells arranged in a circular manner and elastic fibers, showing a variation in the mural elements proportion. It was evidenced the presence of a external elastic lamina, marking the transition between the median and adventicial tunic, formed by elastic fibers condensation. The aortic adventicial tunic showed to be little organized, having in its structure predominantely colagen fibers beans with some isolated smooth muscular fibers or in small fascicules among a few elastic fibers.