Flood Routing Models in Confluent and Dividing Channels

By introducing a water depth connecting formula, the hydraulic equations in the dividing channel system were coupled and the relation of discharge distribution between the branches of the dividing channels can be yielded. In this manner, a numerical model for the confluent channels was established to study the variation of backwater effects with the parameters in the channel junction. The meeting of flood peaks in the mainstream and tributary can be analyzed with this model. The flood peak meeting is found to be a major factor for the extremely high water level in the mainstream during the 1998 Yangtze River flood. Subsequently the variations of discharge distribution and water level with channel parameters between each branch in this system were studied as well. As a result, flood evolution caused by Jingjiang River shortcut and sediment deposition in the entrance of dividing channels of the Yangtze River may be qualitatively elucidated. It is suggested to be an effective measure for flood mitigation to enhance regulation capability of reservoirs available upstream of the tributaries and harness branch entrance channels.

Case Study: Influence Of Morphological Changes On Flooding In Jingjiang River

The middle reach of the Yangtze River, customarily called the Jingjiang River, together with its diversion channels and Dongting Lake, form a large complicated drainage system. In the last five decades, significant geomorphological changes have occurred in the drainage system, including the shrinkage of diversion channels, contraction of Dongting Lake, changes in the rating curve at the Luoshan station, and cutoffs of the lower Jingjiang River. These changes are believed to be the cause of the occurrence of abnormal floods in the Jingjiang River. Qualitative analyses suggest that the first three factors aggravate the flood situation in the lower Jingjiang River, while the last factor seems beneficial for flood prevention. To quantitatively evaluate these conclusions, a finite-volume numerical model was constructed. A series of numerical simulations were carried out to test the individual and combined effects of the aforementioned four factors, and these simulations showed that high flood stages in the Jingjiang River clearly are related to the geomorphological changes.

Marine biology of the Sierra Leone River Estuary. 1. The physical environment

The Sierra Leone River Estuary is a relatively young drowned river valley, it is shallow except for a deep channel which passes close to the Freetown shoreline. The upper reaches merge into a network of creeks and channels fringed by large areas of mangrove swamps. It is a tidal estuary of the semi-mixed type with the saline oceanic water entering it on a diurnal cycle. The climate of Sierra Leone is marked by a very distinct change between a very wet rainy season and a dry season. The tidal range of the Estuary (spring 3.03m; neap 2.28m) does not impede normal use of the harbour. The tidal variations can be felt as far as 42 miles inland along the water courses of the Sierra Leone River and its tributaries. The volume of fresh water entering the Estuary is large during the rainy season and greatly reduced during the dry season. Consequently there is a marked fall in salinity during the rainy season and higher salinities due to the marine influence prevailing during the dry season. The nature of the shores and bottom, the hydrography and chemistry of the estuarine system have been outlined in relation to the prevailing climatic conditions.

River habitat survey and geomorphological evaluation of the Glaze Brook Catchment

This is the River habitat survey and geomorphological evaluation of the Glaze Brook Catchment report produced by the Environmental Research and Consultancy of the University of Liverpool in 2002. The major aims of the project were to provide baseline information on river habitats in the Glaze catchment using standard River Habitat Survey (RHS) methods (sampling 25% of the catchment length) and, through the geomorphological audit, to assess the distribution and intensity of geomorphological processes, notably sediment transfer, sources and sinks. This information was then used to develop informed management recommendations. The Glaze catchment is a heavily modified watercourse of generally poor habitat quality. The most important factors contributing to the low quality of the sites are poor bank and channel features; low diversity/absence of channel vegetation; paucity of bankside trees and, to a lesser extent, a lack of channel substrate diversity. The high degree of modification relates principally to extensively resectioned banks and channels plus extensive culverting in the urban parts of the catchment.

Spawning areas and early development of long spiky-head carp (Luciobrama macrocephalus) in the Yangtze River and Pearl River, China

The spawning areas and early development of long spiky-head carp, Luciobrama macrocephalus (Lacepede), an endemic fish species in China, were investigated in the Yangtze River and Pearl River of central and southeastern China between 1961 and 1993. The potamodromous fish migrated upstream to spawn between May and July as the floodwater began to rise. The water-hardened eggs drifted down the river, and the embryos and larvae developed in the course of drifting. The spawning areas of the fish were widely found in the upper and middle main channels and large tributaries. Two large dams (Gezhouba dam and Danjiangkou dam) did not significantly impact on the reproduction of the fish. Fifty stages of the early development from one cell to the juvenile with fully formed fins were observed and characterized pictorially. The larvae of long spiky-head carp could be distinguished from the larvae of other co-occurring species by counting the number of somites and comparing the proportion of sizes of eye to otic capsule.

The Yangtze River dolphin or baiji (Lipotes vexillifer): population status and conservation issues in the Yangtze River, China

1. Baiji were sighted 17 times during three recent simultaneous multi-vessel surveys in the Yangtze River, China (November 4-10, 1997; December 4-9, 1998; October 31-November 5, 1999). There were 11 sightings in 1997 (consisting of 17 animals), five in 1998 (seven animals), and two in 1999 (four animals). It was concluded that 13 individuals Could be considered as a minimum number of the baiji currently in the Yangtze River. 2. An annual rate of population decrease was roughly estimated as 10%. From the body sizes observed, the proportions of old, adult and immature individuals were approximately estimated at 57, 26, and 17% respectively. 3. Baiji showed a significant attraction to confluences and sand bars with large eddies. The present distribution range of the baiji is less than 1400 km in length in the Yangtze main river. Distances between the two nearest groups of baiji appear to be increasing. 4. Two typical sightings are described, in which surfacing and movements of baiji were recorded. Baiji were often found swimming together with finless porpoise. In the surveys they occurred in the same group in 63% of occurrences. Interactions between baiji and finless porpoise are described and discussed. 5. Human activities are the main threats to the baiji. Illegal electrical fishing accounted for 40% of known mortalities during the 1990s. Engineering explosions for maintaining navigation channels have become another main cause of baiji deaths. The last hope of saving the species may be to translocate the remaining baiji into a semi-captive reserve. known as the 'Baiji Semi-natural Reserve'. Copyright (C) 2003 John Wiley Sons, Ltd.

Distribution and their pollution assessment of heavy metals in the sediments of the Yalu River Estuary and its adjacent coastal waters

The present paper deals with the distribution patterns of heavy metals and the associated influencing factors in the Yalu River Estuary and its adjacent coastal waters. Based upon the analysis of the surficial and core sediments measurements, the pollution of heavy metal and potential ecological risk were evaluated. The burial flux and contents of heavy metals (except for copper) have been continuously increasing since the 1920s. Therefore, the gross potential ecological risk for the sediments was high or very high, and the study area was endangered by heavy metals contamination. Heavy metals originated mainly from upstream pollutant input, correlation analysis showed that chromium, nickel, zinc, cadmium, lead, arsenic, and mercury in the sediments of the middle and west channels as well as the sea area of the western Yalu River Estuary concentrations were most probably derived from similar sources. In contrast, the metal of copper most probably originated from sources different from the other metals. Preliminary studies indicate that copper contamination was most likely the result of emission from mining activities situated at the upstream of the river. The contents of heavy metals in the sediments of estuarine turbidity maximum zone of Yalu River were larger than those of any other areas in the middle channel. With large portion of fine sediments, weaker hydrodynamics, and richer sources of heavy metals, the sediments of the west channel, were even more enriched with heavy metals than those of the middle channel.

Storage of sediment-associated nutrients and contaminants in river channel and floodplain systems

Samples of fine-grained channel bed sediment and overbank floodplain deposits were collected along the main channels of the Rivers Aire (and its main tributary, the River Calder) and Swale, in Yorkshire, UK, in order to investigate downstream changes in the storage and deposition of heavy metals (Cr, Cu, Pb, Zn), total P and the sum of selected PCB congeners, and to estimate the total storage of these contaminants within the main channels and floodplains of these river systems. Downstream trends in the contaminant content of the <63 μm fraction of channel bed and floodplain sediment in the study rivers are controlled mainly by the location of the main sources of the contaminants, which varies between rivers. In the Rivers Aire and Calder, the contaminant content of the <63 μm fraction of channel bed and floodplain sediment generally increases in a downstream direction, reflecting the location of the main urban and industrialized areas in the middle and lower parts of the basin. In the River Swale, the concentrations of most of the contaminants examined are approximately constant along the length of the river, due to the relatively unpolluted nature of this river. However, the Pb and Zn content of fine channel bed sediment decreases downstream, due to the location of historic metal mines in the headwaters of this river, and the effect of downstream dilution with uncontaminated sediment. The magnitude and spatial variation of contaminant storage and deposition on channel beds and floodplains are also controlled by the amount of <63 μm sediment stored on the channel bed and deposited on the floodplain during overbank events. Consequently, contaminant deposition and storage are strongly influenced by the surface area of the floodplain and channel bed. Contaminant storage on the channel beds of the study rivers is, therefore, generally greatest in the middle and lower reaches of the rivers, since channel width increases downstream. Comparisons of the estimates of total storage of specific contaminants on the channel beds of the main channel systems of the study rivers with the annual contaminant flux at the catchment outlets indicate that channel storage represents <3% of the outlet flux and is, therefore, of limited importance in regulating that flux. Similar comparisons between the annual deposition flux of specific contaminants to the floodplains of the study rivers and the annual contaminant flux at the catchment outlet, emphasise the potential importance of floodplain deposition as a conveyance loss. In the case of the River Aire the floodplain deposition flux is equivalent to between ca. 2% (PCBs) and 36% (Pb) of the outlet flux. With the exception of PCBs, for which the value is ≅0, the equivalent values for the River Swale range between 18% (P) and 95% (Pb). The study emphasises that knowledge of the fine-grained sediment delivery system operating in a river basin is an essential prerequisite for understanding the transport and storage of sediment-associated contaminants in river systems and that conveyance losses associated with floodplain deposition exert an important control on downstream contaminant fluxes and the fate of such contaminants. © 2003 Elsevier Science Ltd. All rights reserved.

Effects of priority and emerging pollutants on river biofilms

L'activitat humana representa una de les majors causes d'entrada d'una gran varietat de substàncies en els ecosistemes fluvials. L'objectiu principal d'aquest treball es investigar els efectes que els tòxics orgànics poden exercir en els biofilms fluvials. El riu Llobregat ha estat sotmès a fortes pressions, fet que l'ha portat a uns nivells molt elevats de contaminació. En aquest estudi s'ha observat una influència dels plaguicides presents al riu en la distribució de la comunitat de diatomees, així com efectes en el biofilm a nivell funcional i estructural. Experiments amb canals experimentals han mostrat que l'herbicida diuron i el bactericida triclosan poden ocasionar una cadena d'efectes en els biofilms, incloent efectes directes i també efectes indirectes en les relacions entre els components del biofilm. Experiments amb cultius algals han mostrat que aquests tòxics, aplicats en barreja, poden tenir una major toxicitat de la prevista pels models, resultant en efectes sinèrgics.

Uses of airborne scanning laser altimetry for river flood modelling and coastal geomorphology

Two ongoing projects at ESSC that involve the development of new techniques for extracting information from airborne LiDAR data and combining this information with environmental models will be discussed. The first project in conjunction with Bristol University is aiming to improve 2-D river flood flow models by using remote sensing to provide distributed data for model calibration and validation. Airborne LiDAR can provide such models with a dense and accurate floodplain topography together with vegetation heights for parameterisation of model friction. The vegetation height data can be used to specify a friction factor at each node of a model’s finite element mesh. A LiDAR range image segmenter has been developed which converts a LiDAR image into separate raster maps of surface topography and vegetation height for use in the model. Satellite and airborne SAR data have been used to measure flood extent remotely in order to validate the modelled flood extent. Methods have also been developed for improving the models by decomposing the model’s finite element mesh to reflect floodplain features such as hedges and trees having different frictional properties to their surroundings. Originally developed for rural floodplains, the segmenter is currently being extended to provide DEMs and friction parameter maps for urban floods, by fusing the LiDAR data with digital map data. The second project is concerned with the extraction of tidal channel networks from LiDAR. These networks are important features of the inter-tidal zone, and play a key role in tidal propagation and in the evolution of salt-marshes and tidal flats. The study of their morphology is currently an active area of research, and a number of theories related to networks have been developed which require validation using dense and extensive observations of network forms and cross-sections. The conventional method of measuring networks is cumbersome and subjective, involving manual digitisation of aerial photographs in conjunction with field measurement of channel depths and widths for selected parts of the network. A semi-automatic technique has been developed to extract networks from LiDAR data of the inter-tidal zone. A multi-level knowledge-based approach has been implemented, whereby low level algorithms first extract channel fragments based mainly on image properties then a high level processing stage improves the network using domain knowledge. The approach adopted at low level uses multi-scale edge detection to detect channel edges, then associates adjacent anti-parallel edges together to form channels. The higher level processing includes a channel repair mechanism.

Prediction of supercritical flow in open channels

A finite difference scheme based on flux difference splitting is presented for the solution of the one-dimensional shallow water equations in open channels. A linearised problem, analogous to that of Riemann for gas dynamics, is defined and a scheme, based on numerical characteristic decomposition, is presented for obtaining approximate solutions to the linearised problem. The method of upwind differencing is used for the resulting scalar problems, together with a flux limiter for obtaining a second order scheme which avoids non-physical, spurious oscillations. The scheme is applied to a problem of flow in a river whose geometry induces a region of supercritical flow.

River avulsions on the Taquari megafan, Pantanal wetland, Brazil

The Pantanal wetland is located in a tectonically active interior sedimentary basin in west-central Brazil. The south-flowing Paraguay River is the trunk-river of an alluvial constructional landform comprising several large alluvial fans, the largest one of which is the Taquari megafan. The Taquari River flows in two distinct geomorphologic zones within the megafan. Entrenched on sediments of Pleistocene fan lobes, the Taquari River flows in a 3 to 5 km wide meander belt in the upper fan, where avulsion is hindered by entrenchment. Downstream of the intersection point, stream discharge progressively decreases and the Taquari River becomes narrow and shallow toward the Paraguay River plain. Within the distributary fan lobe, the channel-levee sandy complex is topographically higher than the adjacent floodplains and avulsion is a natural consequence of crevasses in the natural levees. Many channel avulsions have occurred during the last decades and documented cases show that significant channel changes may take place in a few years. Beginning with crevassing in 1988 and ending with the abandonment of the former channel in 1998, the river completely changed course in the lower fan. Presently, a major avulsion is occurring in the upper portion of the growing fan lobe, where many crevasses have appeared in the natural levees with associated splays onto the floodbasin. New anastomosed channels have formed north of the Taquari River, but downstream of them the flow is unconfined and the water spreads into natural floodbasins. This avulsion is still in process and allows observation of channel evolution, the geomorphic features produced, the sedimentary processes involved, and resulting effects. If the new channels do not rejoin the main channel, the river mouth may abandon its present master channel and shift to a position a hundred kilometers north from its present position. A large volume of sediment has been transferred to the floodbasin, with progradation of crevasse splay deposits over fine overbank sediments. Many geomorphic features, recognizable in satellite and radar images, clearly show that avulsion has occurred many limes before in the Taquari River. Avulsion belt deposits and former diverted channels testify to ancient avulsion events within the fan lobe and show that progradation of splays onto the floodbasin is the most important infilling process within the Taquari distributary fan lobe. The avulsion process in the lower Taquari River has accelerated in the last 30 years, along with the magnitude of flooding. Pasture and intensive agriculture in the catchment area has increased the sediment supply to the wetland, but larger floods are also a consequence of higher rainfall since 1973. Avulsion and floods have been a cause of great concern among the local population and landowners. Before human intervention in attempting to control floods, however, a better understanding of the avulsive river system is needed, especially because a major navigation project including the channelization of the Paraguay River was recently proposed. (c) 2005 Elsevier B.V. All rights reserved.

Contrasting fluvial styles of the Paraguay River in the northwestern border of the Pantanal wetland, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

GPR survey in the Taquari River, Pantanal Wetland, west-central Brazil

A pioneer GPR - Ground Penetrating Radar - survey was carried out in the Pantanal of Mato Grosso State, westcentral region of Brazil. Fieldwork acquisitions were carried out in February/2001 and August/2002 in order to understand avulsion processes that are occurring within the Taquari alluvial megafan. The main subjects were to map channel, crevasses and floodplain morphology, as well as active sedimentary bedforms. Many GPR profiles were surveyed in the medium and lower Taquari River course. Subaqueous megaripples and exposed sand bars inside the Taquari channel were identified in the medium fan area. Similar features were observed in the lower fan channels, where there are also many crevasses in the marginal levees. During the flooding seasons the flow splays out in the floodplain where new distributary channels are being formed. As shown by GPR data, in the lower fan the Taquari channel is topographically higher than the adjacent floodplain, situation in which avulsion is a natural process of river course shifting. The lack of information about river morphology and dynamics is a major strain to better understand the sediment transport and the avulsion processes in the Taquari megafan. In this context, the GPR data obtained in wet and dry seasons, integrated to sedimentological information, have been very important to characterize the fluvial dynamics and the avulsion phenomena.

Application of GPR in the study of a modern alluvial megafan: The case of the Taquari river in Pantanal wetland, West-Central Brazil

A novel and timely ground penetrating radar (GPR) survey has been carried out in Pantanal from Mato Grosso State, west-central Brazil. Fieldwork was carried out on February/2001 and August/2002 in an attempt to understand avulsion processes that are occurring within Taquari alluvial megafan. The main objectives were to map channel, crevasse and floodplain morphology, as well as active sedimentary bedforms. Many GPR profiles were acquired in the medium and lower Taquari River course. Subaqueous megaripples and exposed sand bars were identified in the medium fan area. Similar features were observed in the lower fan channels, where there were many crevasses in the marginal levees. During the flooding seasons, the flow splays out on to the floodplain, where new distributary channels are being formed. GPR data show that the lower fan, Taquari channel is topographically higher than the adjacent floodplain, thus favoring avulsion as a natural process of river course shifting. GPR data obtained during the wet and dry seasons, together with sedimentology information have been very important in characterizing the fluvial dynamics, and avulsion phenomena. © 2005 Springer Science+Business Media, Inc.