Análise de misturas solo-agregado reciclados de resíduos sólidos da construção civil, para fins de pavimentação de vias urbanas de baixo volume de tráfego

This work deals with the continuation of Scientific Initiation research initiated by Tamura (2012), which draws up a mixture of soil and recycled aggregate analysis for paving of low traffic volume roads using local materials from the Vale do Paraíba region. The main steps of the process were the soil and recycled aggregate characterization, along with grading tests and California Bearing Ratio (CBR) applied to the soil, the recycled aggregate and the mixture of soil and recycled aggregate; aiming their use as base and sub-base in paving urban roads. The results are discussed, emphasizing the mechanical behavior. The current results are compared with the results of IC Tamura research, taking decisions over this job to the final product best result. For a greater understanding of the work in general were described paving, its structure, its components and its physical behavior. It has been intended to emphasize the importance of the mixture of soil and recycled aggregate to meet the quality requirements and compliance with the specifications of current technical standards, in the context of durability, natural materials economy, decreases volume in landfills and cost reduction

Il calcestruzzo con aggregati di riciclo: sviluppi ed applicazioni nel panorama nazionale ed internazionale.

Il calcestruzzo è uno dei materiali più utilizzati nell’edilizia, ma il meno sostenibile. Per la sua produzione vengono sfruttate elevate quantità di risorse naturali non rinnovabili con un impatto ambientale non trascurabile, sia per le sostanze emesse in atmosfera, sia per le macerie derivate post utilizzo. L’ingresso nel XXI secolo ha segnato definitivamente l’affermazione del concetto di sviluppo sostenibile nei riguardi di tutti i processi produttivi dei beni, che devono essere necessariamente strutturati secondo una logica di risparmio energetico e di controllo della produzione di scorie e rifiuti, prevedendone un loro riutilizzo in altri settori, o un loro smaltimento senza provocare danni all’ambiente. Anche l’industria del cemento e del calcestruzzo è chiamata a svolgere il proprio ruolo per contribuire ad un miglior bilancio ecologico globale, indirizzando la ricerca verso possibilità d’impiego di materiali “innovativi”, che siano in grado di sostituire parzialmente o totalmente l’uso di materie prime non rinnovabili, tenendo conto dell’enorme richiesta futura di infrastrutture, soprattutto nei paesi in via di sviluppo. Negli ultimi anni si sta sempre più affermando il potenziale del riciclo dei materiali ottenuti dalla demolizione di edifici (C&DW – Construction and Demolition Waste), questo dovuto anche a politiche di gestione dei rifiuti che incentivano il risparmio, il riutilizzo, il riciclo e la valorizzazione dei beni. I calcestruzzi con aggregati di riciclo sono generalmente suddivisi in due macrogruppi: quelli ottenuti da aggregati di riciclo di solo calcestruzzo (RCA – Recycled Coarse Aggregate) e quelli da aggregati da demolizione totale (MRA – Mixed Recycled Aggregate) che però contengono molte impurità. Come anche uno può subito pensare gli aggregati riciclati hanno delle proprietà diverse da quelli naturali, questi contengono oltre l’aggregato naturale anche il legante coeso, polveri di laterizio, vetro, ceramica, plastica eccet., i quali offrono una miscela ricca di cloruri, solfati, silice amorfa ed altri componenti dannosi per la nuova miscela di calcestruzzo. In presenza di questi prodotti, gli aggregati non solo non soddisfano i requisiti chimici, ma influiscono negativamente anche sulle proprietà fisico-meccaniche del calcestruzzo. Per questo vedremmo in questa tesi tramite un accurata analisi degli aggregati, e del loro “contributo” per il corretto comportamento del calcestruzzo, leggendo criticamente come le normative regolano i requisiti che gli aggregati debbono soddisfare, vedendo le varie possibilità di riutilizzo dei materiali di riciclo da demolizione. La tesi mira all'incentivo dei materiali da riciclo, come scelta sostenibile per il futuro dell'edilizia. E' stato calcolato che la produzione totale di macerie da demolizione nel mondo, non supera il 20% in massa degli aggregati che vengono utilizzati per la produzione del calcestruzzo nei paesi sviluppati. Dai vari studi è stato valutato in media che col solo 20% di riciclato sostituito, le caratteristiche del calcestruzzo indurito cambiano di poco dal normale miscelato con aggregati naturali; ovviamente se gli aggregati da riciclo sono stati selezionati e sottoposti ai vari test delle norme europee standardizzate. Quindi uno può subito pensare in linea teorica, tralasciando i costi di gestione, trasporto eccet. , che basta utilizzare per ogni metro cubo di calcestruzzo 20% di riciclato, per rispondere allo smaltimento dei rifiuti da C&D; abbassando cosi i costi degli inerti naturali, sempre parlando di economie di scala. Questo è in linea teorica, ma riflette un dato rilevante. Nel presente lavoro si partirà da una veloce lettura sul comportamento del calcestruzzo, su i suoi principali costituenti, concentrandoci sugli aggregati, analizzandone le sue proprietà fisico-meccaniche, quali la granulometria, la resistenza meccanica e la rigidezza, valutando l’importanza dei legami coesivi tra aggregato alla pasta cementizia. Verranno inoltre analizzate le azioni deleterie che possono instaurarsi tra aggregato di riciclo e pasta cementizia. Dopo aver visto le varie politiche sulla gestione dei rifiuti, la legislazione passata e presente sull’uso dei materiali riciclati, si analizzeranno vari studi sulle proprietà fisico-meccaniche dei calcestruzzi con aggregati di riciclo seguiti da università e poli di ricerca internazionali. Se gli aggregati di riciclo sono selezionati con metodo, in presenza di piani di gestione regionale e/o nazionale, è possibile soddisfare le prestazioni richieste del calcestruzzo, nel rispetto delle politiche di sostenibilità economico-ambientali. Può essere il calcestruzzo riciclato una scelta non solo sostenibile, ma anche economica per il settore edile? Si può avere un calcestruzzo riciclato ad alte prestazioni? Quali sono le politiche da mettere in atto per un mercato di produzione sostenibile del riciclato? Questo e molto altro verrà approfondito nelle pagine seguenti di questa tesi.

Tratamento superficial dos agregados reciclados de RCD com hidrofugantes.

A proposta busca reduzir a absorção de água dos agregados reciclados de Resíduos de Construção e Demolição (RCD), através do tratamento de sua superfície com hidrofugante, de maneira que estes não aumentem o consumo de água tampouco reduzam a resistência mecânica. Os agregados reciclados de RCD foram caracterizados quanto à granulometria, morfologia, porosidade, ângulo de contato aparente, absorção de água, análise de imagem e rugosidade superficial. Em seguida, os mesmos foram tratados superficialmente com dois tipos de hidrofugante: solução de silano e parafina. Todos os tratamentos permitiram reduzir a absorção de água dos agregados reciclados de RCD. O tratamento por imersão foi aquele que permitiu obter os melhores resultados e a menor variabilidade entre as técnicas. Os tratamentos hidrofugam a superfície, apesar da parafina apresentar maior molhabilidade. O tratamento com parafina apresentou, em termos de absorção de água, resultados inferiores e menos variáveis que o silano. Os parâmetros de rugosidade constataram que, ambos os materiais perdem seu perfil topográfico original quando tratados com parafina. Os diferentes agregados reciclados com cada hidrofugante foram aplicados em materiais cimentícios analisados no estado fresco e no estado endurecido. Os tratamentos reduziram a absorção e o consumo de água de mistura, porém afetaram negativamente as propriedades mecânicas, devido nova interface gerada (no caso específica de parafina) e falta de molhabilidade nas superfícies.

Viabilidad de la aplicación de materiales reciclados y cenizas de biomasa en la fabricación de materiales tratados con cemento

La presente Tesis Doctoral es una contribución al conocimiento y la investigación sobre el uso de áridos reciclados y cenizas de fondo procedentes de la combustión de biomasa para su uso en ingeniería civil. El interés en el uso de áridos reciclados procedentes de residuos de construcción y demolición (RCD) están en continuo crecimiento debido a su potencial frente a diversos usos, entre ellos como material tratado con cemento para capas estructurales de carretera. Por otro lado, la producción de energía eléctrica a partir de centrales termoeléctricas que emplean biomasa como combustible, origina principalmente dos residuos: Cenizas de fondo (CF) formadas por el material total o parcialmente quemado y cenizas volantes (CV), partículas arrastradas por la corriente de gases al exterior de la cámara de combustión. En el desarrollo de este trabajo, se evaluó en una primera etapa, el comportamiento físico, químico y mecánico de diferentes mezclas de materiales granulares reciclados tratados con cemento, con diferentes contenidos de sulfato y de esta manera poder establecer protocolos de aplicación en la fabricación de suelocemento. Posteriormente, se analizo la viabilidad técnica de las cenizas de fondo de biomasa de varias plantas de energía andaluzas y de esta manera, evaluar su potencial uso en obras de infraestructura civil. Se determinó que las cenizas de fondo biomasa poseen propiedades aceptables para ser utilizados como un material de relleno en el núcleo de terraplenes de carreteras de más de 5 m en altura sin medidas de precaución adicionales. Por último, se estudio la posibilidad de incorporar, en proporciones determinadas, cenizas de fondo de biomasa en diferentes mezclas con árido natural y árido reciclado para su uso en ingeniería civil, concretamente como suelocemento para base y subbase de carreteras. El análisis de las propiedades mecánicas fue muy positivo. Las características físicas, químicas y mecánicas han sido estudiadas de acuerdo a la normativa vigente, y los parámetros han sido comparados con las especificaciones técnicas impuestas por la regulación española. La concepción del residuo como recurso para incorporarlo de nuevo al sistema productivo es un reto clave y una obligación y la principal motivación para el desarrollo de la presente Tesis Doctoral. Por ello, la correcta gestión de estos subproductos industriales, es esencial para evitar los impactos negativos sobre los ecosistemas, la biodiversidad y la salud humana, sin olvidar el beneficio económico que supone esta práctica.

Comportamento mecânico de um agregado reciclado a partir de resíduos de construção e demolição submetido a carregamentos cíclicos

Tese (doutorado)—Universidade de Brasília, Faculdade de Tecnologia, Programa de Pós-Graduação em Geotecnia, 2016.

Performance of concrete pavements containing recycled concrete aggregate /

"March 1997."

Durability performance of concrete made with fine recycled concrete aggregates

Fine recycled aggregates are seen as the last choice in recycling for concrete production. Many references quote their detrimental influence on the most important characteristics of concrete: compressive and tensile strength; modulus of elasticity; water absorption; shrinkage: carbonation and chloride penetration. These two last characteristics are fundamental in terms of the long-term durability of reinforced or prestressed concrete. In the experimental research carried out at IST, part of which has already been published, different concrete mixes (with increasing rates of substitution of fine natural aggregates sand - with fine recycled aggregates from crushed concrete) were prepared and tested. The results were then compared with those for a reference concrete with exactly the same composition and grading curve, but with no recycled aggregates. This paper presents the main results of this research for water absorption by immersion and capillarity, chloride penetration (by means of the chloride migration coefficient), and carbonation resistance, drawing some conclusions on the feasibility of using this type of aggregate in structural concrete, while taking into account any ensuing obvious positive environmental impact.

Re-use assessment of thermoset composite wastes as aggregate and filler replacement for concrete-polymer composite materials: a case study regarding GFRP pultrusion wastes

Glass fibre-reinforced plastics (GFRP), nowadays commonly used in the construction, transportation and automobile sectors, have been considered inherently difficult to recycle due to both the cross-linked nature of thermoset resins, which cannot be remoulded, and the complex composition of the composite itself, which includes glass fibres, polymer matrix and different types of inorganic fillers. Hence, to date, most of the thermoset based GFRP waste is being incinerated or landfilled leading to negative environmental impacts and additional costs to producers and suppliers. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. In this study, the effect of the incorporation of mechanically recycled GFRP pultrusion wastes on flexural and compressive behaviour of polyester polymer mortars (PM) was assessed. For this purpose, different contents of GFRP recyclates (0%, 4%, 8% and 12%, w/w), with distinct size grades (coarse fibrous mixture and fine powdered mixture), were incorporated into polyester PM as sand aggregates and filler replacements. The effect of the incorporation of a silane coupling agent was also assessed. Experimental results revealed that GFRP waste filled polymer mortars show improved mechanical behaviour over unmodified polyester based mortars, thus indicating the feasibility of GFRP waste reuse as raw material in concrete-polymer composites.

Influence of ageing on the properties of bitumen from asphalt mixtures with recycled concrete aggregates

The reuse of recycled concrete aggregates in new hot-mix asphalt can be a more sustainable method of production, but these mixtures may need a heat treatment before compaction to improve their water sensitivity performance. A direct consequence of this treatment is an increase in the hot-mix asphalt resilient modulus. The aim of this paper is to analyse the effect of ageing on the stiffness of asphalt mixtures with different amounts of recycled concrete aggregates, before and after a heat treatment, which was analysed through the assessment of its bitumen properties. Moreover, this paper also aims to analyse whether the rolling thin-film oven test is able to simulate the ageing effect of the heat treatment. In the laboratory work, a paving grade bitumen B50/70 has been used to produce asphalt mixtures with 0% and 30% recycled concrete aggregates, and the bitumen was later characterised (using penetration, softening point, dynamic viscosity and dynamic shear rheometer tests) in various situations, such as when using virgin bitumen, short-term aged bitumen, aged bitumen after heat treatment (simulated with 4 h of rolling thin-film oven test) and bitumen samples recovered from asphalt mixtures with different production mixes (0% and 30% recycled concrete aggregate) and heat treatment conditions (0 and 4 h of curing time in the oven). Based on the results obtained, it could be concluded that the ageing resulting from the heat treatment is the primary cause of the hot-mix asphalt's increased stiffness, while recycled concrete aggregate content has a small influence. Moreover, it could be concluded that when there is no curing time, the recycled concrete aggregate protects the bitumen against ageing. Additionally, it could be stated that the rolling thin-film test is able to adequately simulate the ageing effect of the heat treatment. Thus, this test is useful for determining the ageing suffered by the bitumen when the recycled concrete aggregate mixture is manufactured using a heat treatment.

Recycled Portland Cement Concrete Pavement in Iowa, HR-506, 1984

In recent years, there has been an increased interest in conservation of our resources, preservation of our environment and maintaining our ecology. Recycling of materials is a procedure that will immediately contribute to all of these desirable end results. Our economy is built on private enterprise and profit incentive and in the past, with abundant inexpensive resources, there was little incentive to recycle. Shortages of materials and energy (once considered abundant) along with regulations to protect the environment have emphasized the need for recycling. These environmental conditions coupled with the loss of purchase power by inflation has generated more interest in recycling in the transportation field. The Iowa Department of Transportation (Iowa DOT) is interested in recycling portland cement concrete (pcc) pavement to: 1. Provide aggregate where high quality aggregate is no longer economically available. 2. Eliminate the need for locations to waste the large amount of pavement rubble. 3. Conserve the present aggregate sources. 4. Reduce the need for disrupting land for quarrying purposes. 5. Save fuel and energy by reducing aggregate transportation.

Parametric model for the analysis of concrete expansion due to alkali-aggregate reaction

The alkali-aggregate reaction (AAR) is a chemical reaction that provokes a heterogeneous expansion of concrete and reduces important properties such as Young's modulus, leading to a reduction in the structure's useful life. In this study, a parametric model is employed to determine the spatial distribution of the concrete expansion, combining normalized factors that influence the reaction through an AAR expansion law. Optimization techniques were employed to adjust the numerical results and observations in a real structure. A three-dimensional version of the model has been implemented in a finite element commercial package (ANSYS(C)) and verified in the analysis of an accelerated mortar test. Comparisons were made between two AAR mathematical descriptions for the mechanical phenomenon, using the same methodology, and an expansion curve obtained from experiment. Some parametric studies are also presented. The numerical results compared very well with the experimental data validating the proposed method.

Concretes and mortars recycled with water treatment sludge and construction and demolition rubble

There are about 7500 water treatment plants in Brazil. The wastes these plants generate in their decantation tanks and filters are discharged directly into the same brooks and rivers that supply water for treatment. Another serious environmental problem is the unregulated disposal of construction and demolition rubble, which increases the expenditure of public resources by degrading the urban environment and contributing to aggravate flooding and the proliferation of vectors harmful to public health. In this study, an evaluation was made of the possibility of recycling water treatment sludge in construction and demolition waste recycling plants. The axial compressive strength and water absorption of concretes and mortars produced with the exclusive and joint addition of these two types of waste was also determined. The ecoefficiency of this recycling was evaluated by determining the concentration of aluminum in the leached extract resulting from the solubilization of the recycled products. The production of concretes and mortars with the joint addition of water treatment sludge and recycled concrete rubble aggregates proved to be a viable recycling alternative from the standpoint of axial compression strength, modulus of elasticity, water absorption and tensile strength by the Brazilian test method. (C) 2008 Elsevier Ltd. All rights reserved.

Chemical-mineralogical characterization of C&D waste recycled aggregates from Sao Paulo, Brazil

This study presents a methodology for the characterization of construction and demolition (C&D) waste recycled aggregates based on a combination of analytical techniques (X-ray fluorescence (XRF), soluble ions, semi-quantitative X-ray diffraction (XRD), thermogravimetric analysis (TCA-DTG) and hydrochloric acid (HCl) selective dissolution). These combined analytical techniques allow for the estimation of the amount of cement paste, its most important hydrated and carbonated phases, as well as the amount of clay and micas. Details of the methodology are presented here and the results of three representative C&D samples taken from the Sao Paulo region in Brazil are discussed. Chemical compositions of mixed C&D aggregate samples have mostly been influenced by particle size rather than the visual classification of C&D into red or grey and geographical origin. The amount of measured soluble salts in C&D aggregates (0.15-25.4 mm) is lower than the usual limits for mortar and concrete production. The content of porous cement paste in the C&D aggregates is around 19.3% (w/w). However, this content is significantly lower than the 43% detected for the C&D powders (< 0.15 min). The clay content of the powders was also high, potentially resulting from soil intermixed with the C&D waste, as well as poorly burnt red ceramic. Since only about 50% of the measured CaO is combined with CO(2), the powders have potential use as raw materials for the cement industry. (C) 2008 Elsevier Ltd. All rights reserved.

Environmental life cycle assessment of concrete made with fine recycled concrete aggregates

The majority of worldwide structures use concrete as its main material. This happens because concrete is economically feasible, due to its undemanding production technology and case Of use. However, it is widely recognized that concrete production has a strong environmental impact in the planet. Natural aggregates use is one of the most important problems of concrete production nowadays, since they are obtained from limited, and in some countries scarce, resources. In Portugal, although there are enough stone quarries to cover coarse aggregates needs for several more years, Supplies of fine aggregates are becoming scarcer, especially in the northern part of the country. On the other hand, as concrete structures' life cycle comes to an end, an urgent need emerges to establish technically and economically viable solutions for demolition debris, other than for use as road base and quarry fill. This paper presents a partial life cycle assessment (LCA) of concrete made with fine recycled concrete aggregates performed with EcoConcrete tool. EcoConcrete is a tailor-made, interactive, learning and communications tool promoted by the Joint Project Group (JPG) on the LCA of concrete, to qualify and quantify the overall environment impact of concrete products. It consists of an interactive Excel-spreadsheet in which several environmental inputs (material quantities, distances from origin to production Site, production processes) and outputs (material, energy, emissions to air, water, soil or waste) are collected in a life cycle inventory, and are then processed to determine the environmental impact (assessment) of the analysed concrete, in terms of ozone layer depletion, smog or "greenhouse" effect.

Concrete with fine recycled aggregates: a review

This paper presents a review of the literature published so far on the use of fine aggregates from construction demolition waste used as a partial or total replacement of fine natural aggregates in concrete production. The review presents the initial works on this subject and an overview of the existing regulations. It goes on to describe the production, treatment and properties of the fine recycled aggregates (FRA). The most suitable mixing techniques for concrete with this type of aggregates are then discussed. The properties of these concrete mixes are analysed in detail, after which a few examples of structures with this type of concrete are described and compared. The acquisition of fine natural aggregates and the dumping of the fine fraction of construction and demolition waste are two serious environmental problems that can be solved simultaneously by using FRA in concrete production, a subject that is lagging behind the use of the corresponding coarse fraction.