Dating WF16: exploring the chronology of a Pre-Pottery Neolithic A settlement in the Southern Levant

A pre-requisite for understanding the transition to the Neolithic in the Levant is the establishment of a robust chronology, most notably for the late Epi-Palaeolithic and Pre-Pottery Neolithic A (PPNA) periods. In this contribution we undertake a dating analysis of the Pre-Pottery Neolithic site of WF16, southern Jordan, drawing on a sample of 46 AMS 14C dates. We utilise Bayesian methods to quantify an old wood effect to provide an offset that we factor into chronological models for a number of individual structures at WF16 and for the settlement as a whole. In doing so we address the influence of slope variations in the calibration curve and expose the significance of sediment and sample redeposition within sites of this nature. We conclude that for the excavated deposits at WF16 human activity is likely to have started by c. 11.84 ka cal bp and lasted for at least c. 1590 years, ceasing by c. 10.24 ka cal bp. This is marked by a particularly intensive period of activity lasting for c. 350 years centred on 11.25 ka cal bp followed by less intensive activity lasting a further c. 880 years. The study reveals the potential of WF16 as a laboratory to explore methodological issues concerning 14C dating of early Neolithic sites in arid, erosional environments.

Chemical process to separate iron oxides particles in pottery sample for EPR dating

Ancient potteries usually are made of the local clay material, which contains relatively high concentration of iron. The powdered samples are usually quite black, due to magnetite, and, although they can be used for thermoluminescene (TL) dating, it is easiest to obtain better TL reading when clearest natural or pre-treated sample is used. For electron paramagnetic resonance (EPR) measurements, the huge signal due to iron spin-spin interaction, promotes an intense interference overlapping any other signal in this range. Sample dating is obtained by dividing the radiation dose, determined by the concentration of paramagnetic species generated by irradiation, by the natural dose so as a consequence, EPR dating cannot be used, since iron signal do not depend on radiation dose. In some cases, the density separation method using hydrated solution of sodium polytungstate [Na(G)(H(2)W(12)O(40))center dot H(2)O] becomes useful. However, the sodium polytungstate is very expensive in Brazil: hence an alternative method for eliminating this interference is proposed. A chemical process to eliminate about 90% of magnetite was developed. A sample of powdered ancient pottery was treated in a mixture (3:1:1) of HCI, HNO(3) and H(2)O(2) for 4 h. After that, it was washed several times in distilled water to remove all acid matrixes. The original black sample becomes somewhat clearer. The resulting material was analyzed by plasma mass spectrometry (ICP-MS), with the result that the iron content is reduced by a factor of about 9. In EPR measurements a non-treated natural ceramic sample shows a broad spin-spin interaction signal, the chemically treated sample presents a narrow signal in g= 2.00 region, possibly due to a radical of (SiO(3))(3-), mixed with signal of remaining iron [M. lkeya, New Applications of Electron Spin Resonance, World Scientific, Singapore, 1993, p. 285]. This signal increases in intensity under -gamma-irradiation. However, still due to iron influence, the additive method yielded too old age-value. Since annealing at 300 degrees C, Toyoda and Ikeya IS. Toyoda, M. Ikeya, Geochem. J. 25 (1991) 427-445] states that E `(1)-signal with maximum intensity is obtained, while annealing at 400 degrees C E`(1)-signal is completely eliminated, the subtraction of the second one from 300 degrees C heat-treated sample isolate E`(1)-like signal. Since this is radiation dose-dependent, we show that now EPR dating becomes possible. (C) 2008 Elsevier B.V. All rights reserved.

SEM, EPR and ToF-SIMS analyses applied to unravel the technology employed for pottery-making by pre-colonial Indian tribes from Pantanal, Brazil

The present work aims at elucidating the technology applied in the fabrication of ceramic objects by the ancient ceramists that inhabited the western border of Pantanal, Mato-Grosso do Sul, with the help of a multidisciplinary approach making use of chemical and physical methods of analysis. The potshards under study show the presence of different types of additives, as determined by scanning electron microscopy (SEM) and time of flight secondary ion mass spectrometry (ToF-SIMS). The dispersion of the additives within the ceramic matrix was also addressed by SEM, which shed light on the mounting technique used by the potters to assemble the ceramic vessels. Moreover, the tensile strength conferred to the pottery by the use of a specific type of additive was evaluated by applying a mechanical test. These results were correlated with the firing temperature of the potshards, determined by means of electron paramagnetic resonance (EPR). (C) 2010 Elsevier Ltd. All rights reserved.

Chemical process to separate iron oxides particles in pottery sample for EPR dating

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

TL dating of pottery fragments from four archaeological sites in Taquari Valley, Brazil

Sixty-three pottery fragments from four archaeological sites, numbered RST110, RST101, RST114 and RST114, in the Taquari Valley, vicinity of the city of Lajeado, Rio Grande do Sul state, southern Brazil, have been dated by the thermoluminescence method. Some of them from RST110 and RST101 are as old as 1400-1200 years, whereas those from RST114 and RST107 are younger than 800 years. This result indicates that RST101 and RST110 were peopled earlier than RST114 and RST107. The recent dates found are 302, 295 and 146 years and they are possible, since the first German immigrants who arrived in this region encountered Tupi-Guarani Indians still living there. One interesting result refers to the glow curves of quartz grains RST110, RST101 and RST114 that differ from the glow curves of RST107 quartz grains.

PXRF and multivariate statistics analysis of pre-colonial pottery from northeast of Brazil

Portable system of energy dispersive X-ray fluorescence was used to determine the elemental composition of 68 pottery fragments from Sambaqui do Bacanga, an archeological site in Sao Luis, Maranhao, Brazil. This site was occupied from 6600 BP until 900 BP. By determining the element chemical composition of those fragments, it was possible to verify the existence of engobe in 43 pottery fragments. Obtained from two-dimensional graphs and hierarchical cluster analysis performed in fragments of stratigraphies from surface and 113-cm level, and 10 to 20, 132 and 144-cm level, it was possible to group these fragments in five distinct groups, according to their stratigraphies. The results of data grouping (two-dimensional graphics) are in agreement with hierarchical cluster analysis by Ward method. Copyright (C) 2011 John Wiley & Sons, Ltd.

Mobilities and Pottery Production Archaeological and Anthropological Perspectives

Our workshop aims at a deeper understanding of various itineraries of pottery and dif-ferent forms of human mobilities in which pottery is relevant, bringing together archae-ological and anthropological perspectives. For thousands of years, pottery has been an important part of many societies’ material culture and therefore a major research topic in both disciplines. In past and present societies the material existence of ceramic vessels is informed by various movements across time and space but also by periods of stasis: from the mo-ment of their production until their exclusion from daily practices, either disposed as waste, excluded as funerary objects or stored as collectibles. In their seemingly endless material durability, ceramic vessels might outlive their human producers, distributors or consumers and travel farther and longer. Still they are embedded in the regimes of human mobility, ranging from daily subsistence-based mobility to long-term migrations. In such processes, pottery shifts between spatial, temporal, social, economic and cultural contexts. Thereby ceramic vessels are appropriated and integrated in new contexts of action and meaning, sometimes leading to material transformations. This workshop takes place in the context of our archaeological research project „Mobili-ties, Entanglements and Transformations in Neolithic Societies on the Swiss Plateau (3900-3500 BC)“ to which our PhDs are connected. We address the above outlined topic by analysing the production of pottery. Based on dendrochronologically dated settle-ments between 3900 and 3500 BC, two regional pottery styles and their local variations are well known, Pfyn and Cortaillod. The vessels share the same habitus and were made of clays and temper deriving from the settlements’ surroundings. However, some vessels specific to other pottery styles are also present on the sites. They are characteristic for pottery styles known from more or less far off regions (Michelsberg, Munzingen or Néo-lithique Moyen Bourguignon). Some of them were travelling objects, as their non local raw materials show. Others seem to have been produced locally, pointing to long-term mobility and a change of residence from neighbouring social groups.

Itineraries of pottery: a mixed methods approach to mobility

Neolithic wetland sites in the Swiss Plateau provide an extraordinary database for the study of mobilities, entanglements and transformations in material culture. Based on dendrochronologically dated settlements between 3900 and 3500 BC, two regional pottery styles and their local variations are well known, Pfyn and Cortaillod. The vessels share the same habitus and were made of local raw materials. However, some vessels specific to other pottery styles are also present in the sites. By focusing on itineraries of vessels and shifts in pottery knowledge, their appropriation in different contexts and the resulting material entanglements, we want to approach the multiple regimes of mobility: At Lake Constance - known for Pfyn pottery - specific Michelsberg vessels like tulip beakers and lugged jars occur in small numbers. These travelling objects were produced with exogenous raw materials and transported to the sites from Southern Germany. At Concise (Lake Neuchâtel) besides the local Cortaillod pottery the whole repertoire of NMB pottery, characteristic for Eastern France, was also produced. Further cases from the same space-time frame point to other regimes of mobility. In our two PhD-projects we compare pottery practices - styles, techniques, raw materials - from over 20 key sites in the region. Based on Bourdieu’s reflexive anthropology, we apply different qualitative and quantitative archaeological and archaeometrical methods, thus striving for a deeper understanding of habitus and the transformative potential of moving people, objects and ideas on local and regional scales and related social contexts.

Pottery as an indication of mobilities?

Pottery is one of the most common and stylistically differentiated sources in prehistoric archaeology. This might be the reason why it served as a waste projection surface for archaeological notions about culture, identity, and mobility in the past. As we do not have access to emic categorisations of Neolithic societies we focus on contexts of practice in which pottery was incorporated. It is the moment of production, which left some of the clearest traces on the vessels. Different ways of using raw materials, specific techniques, and characteristic pottery styles can be observed. We understand them as a result of habitus, as socially shared internalized schemes, patterns and habits in pottery production. Taking this as a staring point, two main pottery groups can be differed on the Swiss Plateau between 3900 and 3500 BC: the Mediterranean influenced Cortaillod pottery in Western Switzerland and the Danubian influenced Pfyn pottery in North-Eastern Switzerland. These pottery styles were not only entangled to some degree. Furthermore, in some settlements vessels made in “foreign” styles - Michelsberg, Munzingen, Néolithique Moyen Bourguignon - are present too. Some of them were travelling objects, as their nonlocal raw materials show. Others were locally made, indicating long-term mobility of their producers. To analyse these phenomena of mobilites and entanglements in our PhDs we plan to apply different archaeological and archaeometrical methods, thus striving for a deeper understanding of the transformative potential of moving people, objects and ideas in Neolithic societies on the Swiss Plateau.

Mobilities, Entanglements, Transformations. Outline of a Research Project on Pottery Practices in Neolithic Wetland Sites of the Swiss Plateau

A large number of later Neolithic sites (3900–3500BC) in Switzerland, Southern Germany and Eastern France offer outstandingly well preserved archaeological materials from cultural layers. Due to the wide use of dendrochronology, settlement remains and artefact assemblages can now be placed into a precise and fixed chronological framework, thus presenting a unique case within prehistoric archaeology. In earlier research, chronological and regional units were constructed on the basis of pottery. These spacial and temporal units of typical pottery sets were understood as Neolithic cultures, as culturally more or less homogenous entities connected with (ethnic) identities. Today, with a larger data corpus of excavated settlements at hand, we can begin to understand that this period of the past was in fact characterised by a multitude of cultural entanglements and transformations. This is indicated by the occurrence of local and non-local pottery styles in one and the same settlement: for example typically local Cortaillod pottery is found together with NMB-styled pottery in settlements at Lake Neuchâtel or Michelsberg pottery is regularly occurring in settlements at Lake Constance where Pfyn pottery style is the typical local one. These and many more examples show that there must have been complex entanglements of social ties expanding between Eastern France, Southern Germany and the Swiss Plateau. Given these circumstances the former notions of Neolithic culture should be critically revised. Therefore, in late 2014, the Prehistoric Archaeology Department at the Archaeological Institute of University of Berne started a four-year research project funded by Swiss National Science Foundation in late 2014: ‘Mobilities, Entanglements and Transformations in Neolithic Societies of the Swiss Plateau (3900-3500 BC)’. It’s objective is to address the topic sketched above by adopting a mixed methods research (MMR)-design combining qualitative and quantitative approaches from archaeology and archaeometry. The approach is theoretically based on Pierre Bourdieu’s reflexive sociology and his concept of habitus but includes further concepts of practice theories. By shifting the focus to the movement of people, ideas and things – to pottery production practices in contexts of mobility – a deeper understanding of the transformative capacities of encounters can be achieved. This opens the path for new insights of Neolithic societies including social, cultural and economic dynamics that were underestimated in former research.

“Let the American potter be a professional amateur" Laura Anne Fry and the American art pottery movement

"Artist Laura Anne Fry blended the concepts of professional and amateur, and helped raise the merit of ceramics in the United States. Fry influenced American art pottery with her contributions to Rookwood Pottery of Cincinnati—changing the course of the company. Her successful experiments with decorating techniques helped Rookwood become a national leader in art pottery, and eventually led to over a decade of controversy between Fry and Rookwood"

Pottery from the Aleutian Islands / George I. Quimby, Curator of Exhibits, Department of Anthropology.

v.36:no.1(1945)

Late Mogollon pottery types of the Reserve area / John B. Rinaldo, Assistant Curator, Archaeology, and Elaine A. Bluhm, Assistant, Archaeology.

v.36:no.7(1956)