DIFFERENTIATING PATH AND SOURCE PROCESSES IN COMPLEX GEOLOGIC STRUCTURE THROUGH PASSIVE SEISMIC STUDIES: BERING GLACIER, ALASKA AND VILLARRICA VOLCANO, CHILE

Measuring shallow seismic sources provides a way to reveal processes that cannot be directly observed, but the correct interpretation and value of these signals depend on the ability to distinguish source from propagation effects. Furthermore, seismic signals produced by a resonating source can look almost identical to those produced by impulsive sources, but modified along the path. Distinguishing these two phenomena can be accomplished by examining the wavefield with small aperture arrays or by recording seismicity near to the source when possible. We examine source and path effects in two different environments: Bering Glacier, Alaska and Villarrica Volcano, Chile. Using three 3-element seismic arrays near the terminus of the Bering Glacier, we have identified and located both terminus calving and iceberg breakup events. We show that automated array analysis provided a robust way to locate icequake events using P waves. This analysis also showed that arrivals within the long-period codas were incoherent within the small aperture arrays, demonstrating that these codas previously attributed to crack resonance were in fact a result of a complicated path rather than a source effect. At Villarrica Volcano, seismometers deployed from near the vent to ~10 km revealed that a several cycle long-period source signal recorded at the vent appeared elongated in the far-field. We used data collected from the stations nearest to the vent to invert for the repetitive seismic source, and found it corresponded to a shallow force within the lava lake oriented N75°E and dipping 7° from horizontal. We also used this repetitive signal to search the data for additional seismic and infrasonic properties which included calculating seismic-acoustic delay times, volcano acoustic-seismic ratios and energies, event frequency, and real-time seismic amplitude measurements. These calculations revealed lava lake level and activity fluctuations consistent with lava lake level changes inferred from the persistent infrasonic tremor.

Síntesis de series temporales de atenuación por lluvia en radioenlaces horizontales

En la actualidad, el uso de los sistemas de telecomunicaciones está aumentado a una gran velocidad. Debido a este aumento se hace imprescindible tener que crear sistemas de telecomunicaciones que trabajen en altas frecuencias. Al trabajar en estas frecuencias aparecen fenómenos atmosféricos que hacen que la señal se vea afectada, como la atenuación por lluvia o la atenuación por gases. Estos efectos podrían incluso hacer inviable la comunicación. Este Proyecto Fin de Grado tiene como objetivo la síntesis de series temporales de atenuación por lluvia en trayecto horizontal que afecta a un radioenlace de 38 GHz situado en Madrid. Para la realización del proyecto se utiliza como punto de partida los efectos de atenuación por lluvia en radioenlace horizontal descritos en la Recomendación UIT-R P.530-15. Los resultados obtenidos permiten examinar la validez del método propuesto en la Recomendación UIT-R P.1853-1 referente a la síntesis de las series temporales de atenuación troposférica. Este método propone un sintetizador para combinar los distintos efectos provocados por atenuación troposférica, que será utilizado para la realización del estudio. Este sintetizador ha sido implementado usado el programa Matlab. La primera parte del Proyecto expone los fundamentos teóricos sobre los que sustenta el presente trabajo. Comienza con la descripción de radioenlace, explicando sus distintos tipos y características. Después se muestran los distintos efectos de la propagación que afectan a un radioenlace. Por último, se presentan los fundamentos teóricos de series temporales, así como su implementación en un enlace de comunicaciones. En la segunda parte del Proyecto se explica el análisis de datos que se ha llevado a cabo. Primero se hace un análisis de la intensidad de lluvia según la Recomendación UIT-R P.837-6. Posteriormente se presentan los resultados de atenuación por lluvia obtenidos, haciendo una comparativa entre el modelo de la Recomendación UIT-R P.530-15, el modelo de la Recomendación UIT-R P.1853-1 y gráficas obtenidas a partir de datos experimentales. Como final del Proyecto se exponen las conclusiones que se han extraído durante su realización, así como posibles líneas futuras de investigación que continúen con el estudio realizado. ABSTRACT. The use of telecommunication systems is increasing rapidly. Due to this rising trend, it’s important to create telecommunication systems that work at high frequencies. However, some atmospheric impairments may well appear when working at these kinds of frequencies such as attenuation due to rain or gases which affect the signal. These effects could even render communication impossible. The aim of this Project is the synthesis of a time series, studying the effect of rain attenuation on a 38 GHz radio link located in Madrid. To carry out this study, the rain attenuation effects on horizontal radio links described in the ITU-R P.530-15 method are used as the starting point. The results obtained enable us to examine the validity of the practical application of the ITU R-P.1853-1 method for tropospheric attenuation time series synthesis. This method proposes a synthesizer which can combine the different effects caused by tropospheric attenuation that will be used for the study. This synthesizer has been implemented using the program Matlab. The first part of the Project starts by describing the theoretical foundations used during the Project performance. It begins with a description of radio links explaining their different types and characteristics. Following on from that, various propagation effects that affect the said radio link are shown. Finally, the theoretical foundations of the time series are presented, as well as its implementation in a communication link. In turn, the second part of the Project explains the data analysis that has been carried out. Firstly an analysis of the intensity of rain is made based on the ITU-R P.837-6 Recommendation. Subsequently, the results of the rain attenuation are presented, thus making a comparison between the ITU-R P.530-15 model, the ITU-R P.1853-1 model and graphs obtained from experimental data. Lastly, the Project shows the conclusions that have been drawn as well as propose future research lines that can be proposed so as to continue with the stud further.

Reengenharia de sistemas na recuperação e modernização de produtos: proposta de um modelo baseado em risco.

Produtos com um tempo considerável de utilização podem ser objeto de um processo de manutenção mais amplo e profundo, que visa prolongar a sua vida útil. O termo recuperação é aplicado a este tipo de manutenção, que visa à substituição de peças defeituosas, desgastadas, e/ou com a vida útil encerrada. O surgimento de novos paradigmas e de um novo conjunto de doutrinas operacionais pode mudar as expectativas e necessidades das partes interessadas de modo que o produto pode ser proposto para uma modernização. Assim, o produto pode ser reengenheirado durante a sua recuperação. Para realizar um projeto de recuperação e modernização, propõe-se uma abordagem em seis passos centrada numa decisão baseada no risco para classificar os componentes de acordo com a ação a ser realizada. A análise do produto é desenvolvida com base em técnicas de desmontagem e uma análise da fase operacional é realizada para as tomadas de decisões. Deste modo, um componente pode sofrer manutenção, ser modernizado, ser excluído, ser inserido ou permanecer fora do escopo dos trabalhos. O processo da gestão baseada em risco também inclui duas fases de monitoramento de risco continuado: durante a produção e na fase de operação. As decisões podem ser revistas pelo uso da análise bayesiana. Um estudo de caso é proposto para ilustrar o modelo num programa de recuperação e modernização de veículos blindados realizada numa unidade do Exército Brasileiro. A aplicação da metodologia permitiu a seleção de uma alternativa de modernização, considerando riscos e benefícios. O desdobramento das análises no projeto detalhado permitiu a definição final do escopo de recuperação e modernização, observando efeitos de propagação de alterações de engenharia. A principal contribuição deste trabalho é a formalização de um estudo da recuperação e modernização como projeto específico, descrevendo suas características de uma forma a permitir a aplicação de um modelo baseado em risco.

Characterization of a multiresonance ring resonator-based optical device

We describe the linear and nonlinear transfer characteristics of a multi-resonance optical device consisting of two ring resonators coupled one to another and to a waveguide. The propagation effects displayed by the device are compared with those of a sequence of a waveguide-coupled fundamental ring resonators.

Spectral self-action of THz emission from ionizing two-color laser pulses in gases

The spectrum of terahertz (THz) emission in gases via ionizing two-color femtosecond pulses is analyzed by means of a semi-analytic model and numerical simulations in 1D, 2D and 3D geometries taking into account propagation effects of both pump and THz fields. We show that produced THz signals interact with free electron trajectories and thus significantly influence further THz generation upon propagation, i.e., make the process inherently nonlocal. This self-action contributes to the observed strong spectral broadening of the generated THz field. Weshow that diffraction of the generated THz radiation is the limiting factor for the co-propagating low frequency amplitudes and thus for the self-action mechanism in 2D and 3D geometries.

Investigating the cosmic-ray ionization rate in the galactic interstellar medium through observations of H3+

Observations of H3+ in the Galactic diffuse interstellar medium (ISM) have led to various surprising results, including the conclusion that the cosmic-ray ionization rate (zeta_2) is about 1 order of magnitude larger than previously thought. The present survey expands the sample of diffuse cloud sight lines with H3+ observations to 50, with detections in 21 of those. Ionization rates inferred from these detections are in the range (1.7+-1.0)x10^-16 s^-1 < zeta_2 < (10.6+-6.8)x10^-16 s^-1 with a mean value of zeta_2=(3.3+-0.4)x10^-16 s^-1. Upper limits (3sigma) derived from non-detections of H3+ are as low as zeta_2 < 0.4x10^-16 s^-1. These low upper-limits, in combination with the wide range of inferred cosmic-ray ionization rates, indicate variations in zeta_2 between different diffuse cloud sight lines. Calculations of the cosmic-ray ionization rate from theoretical cosmic-ray spectra require a large flux of low-energy (MeV) particles to reproduce values inferred from observations. Given the relatively short range of low-energy cosmic rays --- those most efficient at ionization --- the proximity of a cloud to a site of particle acceleration may set its ionization rate. Variations in zeta_2 are thus likely due to variations in the cosmic-ray spectrum at low energies resulting from the effects of particle propagation. To test this theory, H3+ was observed in sight lines passing through diffuse molecular clouds known to be interacting with the supernova remnant IC 443, a probable site of particle acceleration. Where H3+ is detected, ionization rates of zeta_2=(20+-10)x10^-16 s^-1 are inferred, higher than for any other diffuse cloud. These results support both the concept that supernova remnants act as particle accelerators, and the hypothesis that propagation effects are responsible for causing spatial variations in the cosmic-ray spectrum and ionization rate. Future observations of H3+ near other supernova remnants and in sight lines where complementary ionization tracers (OH+, H2O+, H3O+) have been observed will further our understanding of the subject.

Spectral self-action of THz emission from ionizing two-color laser pulses in gases

The spectrum of terahertz (THz) emission in gases via ionizing two-color femtosecond pulses is analyzed by means of a semi-analytic model and numerical simulations in 1D, 2D and 3D geometries taking into account propagation effects of both pump and THz fields. We show that produced THz signals interact with free electron trajectories and thus significantly influence further THz generation upon propagation, i.e., make the process inherently nonlocal. This self-action contributes to the observed strong spectral broadening of the generated THz field. We show that diffraction of the generated THz radiation is the limiting factor for the co-propagating low frequency amplitudes and thus for the self-action mechanism in 2D and 3D geometries.

Predictions of angle dependent tortuosity and elasticity effects on sound propagation in cancellous bone

The anisotropic pore structure and elasticity of cancellous bone cause wave speeds and attenuation in cancellous bone to vary with angle. Previously published predictions of the variation in wave speed with angle are reviewed. Predictions that allow tortuosity to be angle dependent but assume isotropic elasticity compare well with available data on wave speeds at large angles but less well for small angles near the normal to the trabeculae. Claims for predictions that only include angle-dependence in elasticity are found to be misleading. Audio-frequency data obtained at audio-frequencies in air-filled bone replicas are used to derive an empirical expression for the angle-and porosity-dependence of tortuosity. Predictions that allow for either angle dependent tortuosity or angle dependent elasticity or both are compared with existing data for all angles and porosities.

Statistical modelling of wind effects on signal propagation for wireless sensor networks

A wireless sensor network system must have the ability to tolerate harsh environmental conditions and reduce communication failures. In a typical outdoor situation, the presence of wind can introduce movement in the foliage. This motion of vegetation structures causes large and rapid signal fading in the communication link and must be accounted for when deploying a wireless sensor network system in such conditions. This thesis examines the fading characteristics experienced by wireless sensor nodes due to the effect of varying wind speed in a foliage obstructed transmission path. It presents extensive measurement campaigns at two locations with the approach of a typical wireless sensor networks configuration. The significance of this research lies in the varied approaches of its different experiments, involving a variety of vegetation types, scenarios and the use of different polarisations (vertical and horizontal). Non–line of sight (NLoS) scenario conditions investigate the wind effect based on different vegetation densities including that of the Acacia tree, Dogbane tree and tall grass. Whereas the line of sight (LoS) scenario investigates the effect of wind when the grass is swaying and affecting the ground-reflected component of the signal. Vegetation type and scenarios are envisaged to simulate real life working conditions of wireless sensor network systems in outdoor foliated environments. The results from the measurements are presented in statistical models involving first and second order statistics. We found that in most of the cases, the fading amplitude could be approximated by both Lognormal and Nakagami distribution, whose m parameter was found to depend on received power fluctuations. Lognormal distribution is known as the result of slow fading characteristics due to shadowing. This study concludes that fading caused by variations in received power due to wind in wireless sensor networks systems are found to be insignificant. There is no notable difference in Nakagami m values for low, calm, and windy wind speed categories. It is also shown in the second order analysis, the duration of the deep fades are very short, 0.1 second for 10 dB attenuation below RMS level for vertical polarization and 0.01 second for 10 dB attenuation below RMS level for horizontal polarization. Another key finding is that the received signal strength for horizontal polarisation demonstrates more than 3 dB better performances than the vertical polarisation for LoS and near LoS (thin vegetation) conditions and up to 10 dB better for denser vegetation conditions.

Effects of oxygen and culture system on in vitro propagation and redifferentiation of osteoarthritic human articular chondrocytes

Regenerative medicine-based approaches for the repair of damaged cartilage rely on the ability to propagate cells while promoting their chondrogenic potential. Thus, conditions for cell expansion should be optimized through careful environmental control. Appropriate oxygen tension and cell expansion substrates and controllable bioreactor systems are probably critical for expansion and subsequent tissue formation during chondrogenic differentiation. We therefore evaluated the effects of oxygen and microcarrier culture on the expansion and subsequent differentiation of human osteoarthritic chondrocytes. Freshly isolated chondrocytes were expanded on tissue culture plastic or CultiSpher-G microcarriers under hypoxic or normoxic conditions (5% or 20% oxygen partial pressure, respectively) followed by cell phenotype analysis with flow cytometry. Cells were redifferentiated in micromass pellet cultures over 4 weeks, under either hypoxia or normoxia. Chondrocytes cultured on tissue culture plastic proliferated faster, expressed higher levels of cell surface markers CD44 and CD105 and demonstrated stronger staining for proteoglycans and collagen type II in pellet cultures compared with microcarrier-cultivated cells. Pellet wet weight, glycosaminoglycan content and expression of chondrogenic genes were significantly increased in cells differentiated under hypoxia. Hypoxia-inducible factor-3alpha mRNA was up-regulated in these cultures in response to low oxygen tension. These data confirm the beneficial influence of reduced oxygen on ex vivo chondrogenesis. However, hypoxia during cell expansion and microcarrier bioreactor culture does not enhance intrinsic chondrogenic potential. Further improvements in cell culture conditions are therefore required before chondrocytes from osteoarthritic and aged patients can become a useful cell source for cartilage regeneration.

Effects of wall transition regions on surface-wave propagation in a plasma layer bounded by a metal

Effect of near-wall transition regions on the surface wave propagation in a magnetoactive plasma layer bounded by a metal. It is shown that the account for inhomogeneities of plasma density or magnetic field causes an appearance of coupling between surface waves, propagating across magnetic field and localized near difference boundaries of the structure. The resonance damping of surface waves is analyzed too.

Nonlocal scale effects on wave propagation in multi-walled carbon nanotubes

This paper represents the effect of nonlocal scale parameter on the wave propagation in multi-walled carbon nanotubes (MWCNTs). Each wall of the MWCNT is modeled as first order shear deformation beams and the van der Waals interactions between the walls are modeled as distributed springs. The studies shows that the scale parameter introduces certain band gap region in both flexural and shear wave mode where no wave propagation occurs. This is manifested in the wavenumber plots as the region where the wavenumber tends to infinite (or group speed tends to zero). The frequency at which this phenomenon occurs is called the ``Escape frequency''. The analysis shows that, for a given N-walled carbon nanotube (CNT). the nonlocal scaling parameter has a significant effect on the shear wave modes of the N - 1 walls. The escape frequencies of the flexural and shear wave modes of the N-walls are inversely proportionl to the nonlocal scaling parameter. It is also shown that the cut-off frequencies are independent of the nonlocal scale parameter. (C) 2009 Elsevier B.V. All rights reserved.

Axial wave propagation in coupled nanorod system with nonlocal small scale effects

This article deals with the axial wave propagation properties of a coupled nanorod system with consideration of small scale effects. The nonlocal elasticity theory has been incorporated into classical rod/bar model to capture unique features of the coupled nanorods under the umbrella of continuum mechanics theory. Nonlocal rod model is developed for coupled nanorods. The strong effect of the nonlocal scale has been obtained which leads to substantially different wave behavior of nanorods from those of macroscopic rods. Explicit expressions are derived for wavenumber, cut-off frequency and escape frequency of nanorods. The analysis shows that the wave characteristics of nanorods are highly over estimated by the classical rod model, which ignores the effect of small-length scale. The studies also shows that the nonlocal scale parameter introduces certain band gap region in axial or longitudinal wave mode, where no wave propagation occurs. This is manifested in the spectrum cures as the region, where the wavenumber tends to infinite or wave speed tends to zero. The effect of the coupled spring stiffness is also capture in the present analysis. It has been also shown that the cut-off frequency increases as the stiffness of the coupled spring increases and also the coupled spring stiffness has no effect on escape frequency of the axial wave mode in the nanorod. This cut-off frequency is also independent of the nonlocal small scale parameter. The present study may bring in helpful insights while investigating multiple-nanorod-system-models for future nano-optomechanical systems applications. The results can also provide useful guidance for the study and design of the next generation of nanodevices that make use of the wave propagation properties of coupled single-walled carbon nanotubes or coupled nanorods. (C) 2011 Elsevier Ltd. All rights reserved.

Temperature effects on wave propagation in nanoplates

In this paper, the thermal effects on the ultrasonic wave propagation characteristics of a nanoplate are studied based on the nonlocal continuum theory. The nonlocal governing equations are derived for the nanoplate under thermal environment. The axial stress caused by the thermal effects is considered. The wave propagation analysis is carried out using spectral analysis. The influences of the nonlocal small scale coefficient, the room or low temperature, the high temperature and the axial half wave numbers on the wave dispersion properties of nanoplate are also discussed. Numerical results show that the small scale effects and the thermal effects are significant for larger half wavenumbers. The results are qualitatively different from those obtained based on the local plate theory and thus, are important for the development of graphene-based nanodevices such as strain sensor, mass and pressure sensors, atomic dust detectors, and enhancer of surface image resolution. (C) 2011 Elsevier Ltd. All rights reserved.

Study of terahertz wave propagation properties in nanoplates with surface and small-scale effects

In macroscopic and even microscopic structural elements, surface effects can be neglected and classical theories are sufficient. As the structural size decreases towards the nanoscale regime, the surface-to-bulk energy ratio increases and surface effects must be taken into account. In the present work, the terahertz wave dispersion characteristics of a nanoplate are studied with consideration of the surface effects as well as the nonlocal small-scale effects. Nonlocal elasticity theory of plate is used to derive the general differential equation based on equilibrium approach to include those scale effects. Scale and surface property dependent wave characteristic equations are obtained via spectral analysis. For the present study the material properties of an anodic alumina with crystallographic of < 111 > direction are considered. The present analysis shows that the effect of surface properties on the flexural waves of nanoplates is more significant. It can be found that the flexural wavenumbers with surface effects are high as compared to that without surface effects. The scale effects show that the wavenumbers of the flexural wave become highly non-linear and tend to infinite at certain frequency. After that frequency the wave will not propagate and the corresponding wave velocities tend to zero at that frequency (escape frequency). The effects of surface stresses on the wave propagation properties of nanoplate are also captured in the present work. (C) 2012 Elsevier Ltd. All rights reserved.