The press for seniors, an emerging sector that doesn’t quite take off

This article is a description and analysis of the press of seniors in Spain, from two points of view: 1. media mapping, and 2. study of the advertising and editorial content that offer two important magazines of the sector: Sesenta y Más, magazine of the IMSERSO, and Senda Senior, as a commercial proposal. As well, of the study is that the sector does not go through its best moment, lack of advertising interest, but headers offer models of life that best fit the new times, profiling a person who without worrying about their health, be more active in the communication field, in the playful and especially in the cultural.

Caractérisation du fonctionnement d'une hydrolienne à membrane ondulante pour la récupération de l'énergie des courants marins

This manuscript presents three approaches : analytical, experimental and numerical, to study the behaviour of a flexible membrane tidal energy converter. This technology, developed by the EEL Energy company, is based on periodic deformations of a pre-stressed flexible structure. Energy converters, located on each side of the device, are set into motion by the wave-like motion. In the analytical model, the membrane is represented by a linear beam model at one dimension and the flow by a 3 dimensions potential fluid. The fluid forces are evaluated by the elongated body theory. Energy is dissipated all over the length of the membrane. A 20th scale experimental prototype has been designed with micro-dampers to simulate the power take-off. Trials have allowed to validate the undulating membrane energy converter concept. A numerical model has been developed. Each element of the device is represented and the energy dissipation is done by dampers element with a damping law linear to damper velocity. Comparison of the three approaches validates their ability to represent the membrane behaviour without damping. The energy dissipation applied with the analytical model is clearly different from the two other models because of the location (where the energy is dissipated) and damping law. The two others show a similar behaviour and the same order of power take off repartition but value of power take off are underestimated by the numerical model. This three approaches have allowed to put forward key-parameters on which depend the behaviour of the membrane and the parametric study highlights the complementarity and the advantage of developing three approaches in parallel to answer industrial optimization problems. To make the link between trials in flume tank and sea trials, a 1/6th prototype has been built. To do so, the change of scale was studied. The behaviour of both prototypes is compared and differences could be explained by differences of boundary conditions and confinement effects. To evaluated membrane long-term behaviour at sea, a method of ageing accelerated by temperature and fatigue tests have been carried out on prototype materials samples submerged in sea water.

Leakage Temperature Dependency Aware Real-Time Scheduling for Power and Thermal Optimization

Catering to society’s demand for high performance computing, billions of transistors are now integrated on IC chips to deliver unprecedented performances. With increasing transistor density, the power consumption/density is growing exponentially. The increasing power consumption directly translates to the high chip temperature, which not only raises the packaging/cooling costs, but also degrades the performance/reliability and life span of the computing systems. Moreover, high chip temperature also greatly increases the leakage power consumption, which is becoming more and more significant with the continuous scaling of the transistor size. As the semiconductor industry continues to evolve, power and thermal challenges have become the most critical challenges in the design of new generations of computing systems. In this dissertation, we addressed the power/thermal issues from the system-level perspective. Specifically, we sought to employ real-time scheduling methods to optimize the power/thermal efficiency of the real-time computing systems, with leakage/ temperature dependency taken into consideration. In our research, we first explored the fundamental principles on how to employ dynamic voltage scaling (DVS) techniques to reduce the peak operating temperature when running a real-time application on a single core platform. We further proposed a novel real-time scheduling method, “M-Oscillations” to reduce the peak temperature when scheduling a hard real-time periodic task set. We also developed three checking methods to guarantee the feasibility of a periodic real-time schedule under peak temperature constraint. We further extended our research from single core platform to multi-core platform. We investigated the energy estimation problem on the multi-core platforms and developed a light weight and accurate method to calculate the energy consumption for a given voltage schedule on a multi-core platform. Finally, we concluded the dissertation with elaborated discussions of future extensions of our research.

Cuba: From Economic Take-Off to Collapse under Castro

This flyer promotes a book presentation of "Cuba: From Economic Take-off to Collapse under Castro" by co-authors Jorge Salazar-Carrillo and Andro Nodarse-Leon.The book reviews Cuba's economic success pre-Castro, and concludes the Fidel Castro's revolution has been an economic disaster for Cuba. This event was Cosponsored by the Kimberly Green Latin American and Caribbean Center at FIU and will be held on December 15,2015 at Books & Books in Coral Gables, FL.

Modelação numérica de um dispositivo pontual de aproveitamento de energia das ondas

Dissertação para obtenção do Grau de Mestre em Engenharia Mecânica

Modelação numérica de corpos flutuantes – extratores pontuais

Os conversores pontuais de energia das ondas baseiam-se no movimento de um flutuador. Neste trabalho modela-se a resposta de um corpo flutuante quando excitado por ondas regulares e irregulares. Ao contrário da engenharia naval, onde se pretende minimizar os movimentos de um navio face à agitação, na conversão da energia das ondas interessa que o comportamento do corpo flutuante seja ressonante. No entanto, ambos os problemas são modelados pelos mesmos modelos matemáticos. O objetivo deste trabalho é o desenvolvimento de um modelo numérico que permita conhecer o movimento do flutuador quando livre ou ligado a um sistema de conversão de energia Power Take-off (PTO). Nesta dissertação considera-se que o corpo tem apenas liberdade para efetuar movimentos de arfagem. A resolução numérica da dinâmica do extrator apoia-se na teoria linear, sendo nesta dissertação efetuada com recurso ao código comercial Ansys – AQWA, de utilização comum em problemas offshore. Numa primeira fase simulam-se situações para as quais existem resultados publicados na bibliografia, validando-se a metodologia utilizada. Posteriormente, estuda-se o comportamento do sistema de extração para ondas regulares e estados do mar típicos. Variam-se os coeficientes de amortecimento, elásticos e a massa quer do flutuador quer do sistema PTO, otimizando a extração de energia. Utilizam-se análises no tempo e na frequência. O estudo permitiu concluir que é fundamental, do ponto de vista da eficiência energética, que o sistema funcione com características ressonantes, o que é conseguido quando a velocidade do flutuador está em fase com a força de excitação hidrodinâmica. O ajuste da condição de ressonância é conseguida variando os coeficientes elásticos e massa do PTO ou a massa do flutuador.

Perfomance evaluation of a direct injection engine using different blends of soybean (Glycine max) methyl biodiesel

Diesel fuel is used widely in Brazil and worldwide. On the other hand, the growing environmental awareness leads to a greater demand for renewable energy resources. Thus, this study aimed to evaluate the use of different blends of soybean (Glycine max) methyl biodiesel and diesel in an ignition compression engine with direct injection fuel. The tests were performed on an electric eddy current dynamometer, using the blends B10, B50 and B100, with 10; 50 e 100% of biodiesel, respectively, in comparison to the commercial diesel B5, with 5% of biodiesel added to the fossil diesel. The engine performance was analyzed trough the tractor power take off (PTO) for each fuel, and the best results obtained for the power and the specific fuel consumption, respectively, were: B5 (44.62 kW; 234.87 g kW-1 h-1); B10 (44.73 kW; 233.78 g kW-1 h-1); B50 (44.11 kW; 250.40 g kW-1 h-1) e B100 (43.40 kW; 263.63 g kW-1 h-1). The best performance occurred with the use of B5 and B10 fuel, without significant differences between these blends. The B100 fuel showed significant differences compared to the other fuels.

A interatividade na aprendizagem: uma perspectiva cognitiva utilizando conteúdo multimídia

A migração de materiais educacionais para dispositivos portáteis, tais como computadores do tipo tablet, torna possível oferecer altos níveis de interatividade na apresentação de animações e, dessa forma, pesquisas são necessárias para avaliar o valor pedagógico de incorporar recursos sofisticados de interatividade em lições para dispositivos portáteis. Estudantes de Engenharia (no Experimento 1) e estudantes de nível superior de outras áreas (no Experimento 2) estudaram por 5 minutos uma animação mostrando, em um computador do tipo tablet, os seis passos de um procedimento de manutenção para um dispositivo mecânico chamado Tomada de Força. A animação envolveu um baixo nível de interatividade, no qual os estudantes eram capazes de reproduzir, pausar, avançar e voltar a animação por meio de botões acionados em tela sensível ao toque (touch screen); um alto nível de interatividade, no qual os estudantes podiam também tocar e deslizar um dedo na tela para rotacionar a animação ou ainda tocar a tela com dois dedos abrindo-os ou fechando-os para ampliar ou reduzir a animação; ou nenhuma interatividade (apenas no Experimento 2). De forma geral, em ambos os experimentos, os estudantes que utilizaram alto nível de interatividade reportaram maior interesse, mas não mostraram melhor aprendizagem, comparados aos grupos de baixa ou nenhuma interatividade. Entretanto, no Experimento 2, estudantes que se classificaram como alunos verbais demonstraram maior interesse e obtiveram pontuações mais altas de aprendizagem com alta interatividade, em vez de baixa ou nenhuma interatividade. Esse padrão, contudo, não foi encontrado entre os alunos visuais. Também no Experimento 2, os alunos verbais e os alunos com baixo nível de autorregulação de aprendizagem, que manifestaram alto nível de interesse, obtiveram pontuações mais altas de aprendizagem do que os alunos visuais e os alunos com alto nível de autorregulação de aprendizagem, que manifestaram baixo nível de interesse, respectivamente.

Desempenho da colhedora de milho Penha CLM-350: parte I - sistema espigador

Com o propósito de avaliar a colhedora Penha CLM-350, visando fornecer subsídios aos projetos e usuários, realizou-se o presente trabalho, onde foi estudada a eficácia do sistema espigador, determinando-se a porcentagem de milho colhido para os diversos tratamentos estudados. Definiu-se um parâmetro adimensional U, que é a relação entre a velocidade periférica dos roletes e a velocidade de deslocamento da colhedora. Procurou-se relacionar as diversos tratamentos U, com os valores percentuais de grãos de milho colhidos e perdidos no solo. Os resultados foram estudados através da análise de variância, empregando-se o teste F, aos níveis de 1% e 5% de probabilidade e o teste Tukey para a comparação estatística entre as médias.

Desenvolvimento e avaliação do desempenho de um equipamento para ensaio dinâmico de rodado agrícola individual

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Sistema eletrohidráulico para acionamento da esteira vibratória do arrancador-invertedor de amendoim

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Artificial neural network application in short-term prediction in an oscillating water column

Oscillating Water Column (OWC) is one type of promising wave energy devices due to its obvious advantage over many other wave energy converters: no moving component in sea water. Two types of OWCs (bottom-fixed and floating) have been widely investigated, and the bottom-fixed OWCs have been very successful in several practical applications. Recently, the proposal of massive wave energy production and the availability of wave energy have pushed OWC applications from near-shore to deeper water regions where floating OWCs are a better choice. For an OWC under sea waves, the air flow driving air turbine to generate electricity is a random process. In such a working condition, single design/operation point is nonexistent. To improve energy extraction, and to optimise the performance of the device, a system capable of controlling the air turbine rotation speed is desirable. To achieve that, this paper presents a short-term prediction of the random, process by an artificial neural network (ANN), which can provide near-future information for the control system. In this research, ANN is explored and tuned for a better prediction of the airflow (as well as the device motions for a wide application). It is found that, by carefully constructing ANN platform and optimizing the relevant parameters, ANN is capable of predicting the random process a few steps ahead of the real, time with a good accuracy. More importantly, the tuned ANN works for a large range of different types of random, process.

A new latching control technology for improving wave energy conversion

Extracting wave energy from seas has been proven to be very difficult although various technologies have been developed since 1970s. Among the proposed technologies, only few of them have been actually progressed to the advanced stages such as sea trials or pre-commercial sea trial and engineering. One critical question may be how we can design an efficient wave energy converter or how the efficiency of a wave energy converter can be improved using optimal and control technologies, because higher energy conversion efficiency for a wave energy converter is always pursued and it mainly decides the cost of the wave energy production. In this first part of the investigation, some conventional optimal and control technologies for improving wave energy conversion are examined in a form of more physical meanings, rather than the purely complex mathematical expressions, in which it is hoped to clarify some confusions in the development and the terminologies of the technologies and to help to understand the physics behind the optimal and control technologies. As a result of the understanding of the physics and the principles of the optima, a new latching technology is proposed, in which the latching duration is simply calculated from the wave period, rather than based on the future information/prediction, hence the technology could remove one of the technical barriers in implementing this control technology. From the examples given in the context, this new latching control technology can achieve a phase optimum in regular waves, and hence significantly improve wave energy conversion. Further development on this latching control technologies can be found in the second part of the investigation.

Primary wave energy conversions of oscillating water columns

This paper presents a study on the numerical simulation of the primary wave energy conversion in the oscillating water column (OWC) wave energy converters (WECs). The new proposed numerical approach consists of three major components: potential flow analysis for the conventional hydrodynamic parameters, such as added mass, damping coefficients, restoring force coefficients and wave excitations; the thermodynamic analysis of the air in the air chamber, which is under the assumptions of the given power take-off characteristics and an isentropic process of air flow. In the formulation, the air compressibility and its effects have been included; and a time-domain analysis by combining the linear potential flow and the thermodynamics of the air flow in the chamber, in which the hydrodynamics and thermodynamics/aerodynamics have been coupled together by the force generated by the pressurised and de-pressurised air in the air chamber, which in turn has effects on the motions of the structure and the internal water surface. As an example, the new developed approach has been applied to a fixed OWC device. The comparisons of the measured data and the simulation results show the new method is very capable of predicting the performance of the OWC devices.