Post and Letters. 'Correos y cartas'.

Se presenta un secuencia didáctica en la que a través de una historia sencilla los niños aprenderán lo que pasa con las cartas desde que las echan en el buzón hasta que llegan a su destino.

Clastic and core lava components of a silicic lava dome

The formation of a lava dome involves fractionation of the lava into core and clastic components. We show that for three separate, successive andesitic lava domes that grew at Soufrière Hills volcano, Montserrat, between 1999 and 2007, the volumetric proportion of the lava converted to talus or pyroclastic flow deposits was 50%–90% of the lava extruded. Currently, only 8% of the total magma extruded during the 1995–2007 eruption remains as core lava. The equivalent representation in the geological record will probably be even lower. Most of the lava extruded at the surface flowed no further than 150–300 m from the vent before disaggregation, resulting in a lava core whose shape tends to a cylinder. Moderate to high extrusion rates at the Soufrière Hills domes may have contributed to the large clastic fraction observed. Creating talus dissipates much of the energy that would otherwise be stored in the core lava of domes. The extreme hazards from large pyroclastic flows and blasts posed by wholesale collapse of a lava dome depend largely on the size of the lava core, and hence on the aggregate history of the partitioning process, not on the size of the dome.

Comparison of the pre-post and transition question assessments in a health education setting

Objective : This study examined the classical pre-intervention/post-intervention assessment (pre–post) and the single post-intervention transition question assessment (transition question) to determine how well these methods reflected qualitative interview–based participant-reported outcomes from chronic disease self-management education programs (CDSMEPs).

Study Design and Setting : A mixed-method qualitative and quantitative approach was applied in 25 interviews with participants recruited from CDSMEPs within Australia. Qualitative interviews with participants were used as a relative “gold standard” and compared with questionnaire-based pre–post and transition question assessments.

Results : Comparison of the two questionnaire-based assessments showed that most of the individual paired responses were discordant (61%). Using participant's qualitative narratives as a “true” indicator, the pre–post assessment was found on more occasions to be discordant with participant-reported outcomes than the transition question. The origin of the inconsistency was largely because of a change in respondents' perspective that had occurred after pretest, which was mediated by CDSMEPs' experiences and insights.

Conclusion : This study suggests that the pre–post assessment has poor validity for the assessment of health education program outcomes. Alternative assessments, such as the transition question, may result in a more accurate reflection of the impact of such programs on participants.

Satellite tracking large numbers of individuals to infer population level dispersal and core areas for the protection of an endangered species

Aim: Tracking the dispersal patterns and habitat use of migratory species is necessary to delineate optimal areas for protection, with large sample sizes being more representative of the population. Here, we examine the dispersal patterns of a key Mediterranean loggerhead turtle (Caretta caretta) breeding population to identify priority foraging sites for protection. Location: Zakynthos Island, Greece and the wider Mediterranean. Method: We examined the dispersal patterns and foraging sites of 75 adult loggerheads (n = 38 males and 37 females) tracked from the breeding area of Zakynthos Island (Greece) from 2004 to 2011. We then combined our data with published sea turtle literature to identify key foraging sites for protection. Results: While both males and females exhibited similar dispersal patterns, about 25% males remained < 100 km of Zakynthos, whereas all females (except one) migrated > 200 km. Integration of our data with the wider literature isolated 10 core sites in proximity to existing protected areas, which could potentially protect 64% of the Zakynthos population, while five sites support individuals from at least 10 other loggerhead breeding populations. Main conclusions: Due to the widespread availability of neritic foraging grounds across the Mediterranean, sea turtles from Zakynthos exhibit disparate dispersal patterns. However, protecting only a few objectively defined important sites can encompass a large proportion of the foraging areas used and hence have considerable conservation benefit.

Nutrient and core and non-core food intake of Australian schoolchildren differs on school days compared to non-school days.

Overall the diets of Australian schoolchildren are suboptimal, but differences in nutrient and food intake on school versus non-school days have not been assessed. The aim of this study was to examine differences in nutrient and core and non-core food intake on school days versus non-school days in Australian schoolchildren aged 6-16 years. Cross-sectional analysis of the 2007 Australian Children's Nutrition and Physical Activity Survey. Dietary intake was assessed via one 24-h dietary recall. A school day was defined as Monday-Friday, a non-school day included Saturday, Sunday and public/school holidays. Independent t-tests and χ(2) tests were used to assess differences in continuous and categorical variables, respectively. Multiple linear and logistic regression was used to adjust for confounders. Forty-eight per cent of recalls were completed on a non-school day. On non-school days primary schoolchildren aged 6-11 years (n = 1334) and secondary schoolchildren aged 12-16 years (n = 1362) had significantly higher absolute intakes of sugars, total fat and saturated fat (all P < 0.05). In addition the energy density of foods consumed was greater (P < 0.001), but there was no difference in the energy density of fluids. The sodium density of the diet did not differ across day types. On non-school days, total core food intake was ~30% higher and children were more likely to consume sugar-sweetened beverages, fried potatoes and take-away pizzas and burgers (all P < 0.05). Important differences in the intake of sugar, total fat, and saturated fat and noncore foods exist on non-school days compared to school days in Australian schoolchildren. To improve the diets of schoolchildren there is scope for strategies that target non-school day eating practices.

The Disk-Specimen Thickness Does Not Influence the Push-Out Bond Strength Results Between Fiber Post and Root Dentin

This study evaluated the effect of different thickness of disk-shaped specimens on the push-out bond strength test. Eighteen lower bovine teeth were sectioned (20mm) and prepared (15mm) with the same post system drill (Light Post (R) #1, Schaumburg, IL, Bisco, USA). The apical third of each specimen was embedded in a plastic matrix filled with an acrylic resin (Dencrilay (TM), Dencril, São Paulo, Brazil). The posts were cleaned with alcohol, silanated (ProSil (R), FGM, Joenville, SC, Brazil) and cemented with the RelyX (TM) U100 (3M ESPE, St. Paul, MN, USA). Each specimen was sectioned into three pieces of differing thicknesses (1, 2, and 4 mm). These disk-samples were allocated into 3 groups (n=18) and subjected to push-out testing. One-way ANOVA showed no influence of the specimen thickness on the results (p=0.842). No correlation was observed between thickness and push-out bond strength (Pearson Correlation, r(2)=0.0688; P=0.6209). The push-out bond strength test was not affected by the thickness of the disk-specimens.

Aesthetic posts and cores for metal-free restoration of endodontically treated teeth.

Utilization of contemporary post and core systems has facilitated the aesthetic restoration of endodontically treated teeth. Light transmission and biocompatibility have been enhanced by the introduction of metal-free post systems. The periodontal and endodontic status, root length, and histological structure of the devitalized teeth must be considered in order to achieve successful restoration following endodontic treatment. This article presents various restorative criteria for the aesthetic placement and buildup of post and core materials, as well as the preservation of maximum coronal and root structure.

Evaluation of the flexural strength of carbon fiber-, quartz fiber-, and glass fiber-based posts

This study investigated the flexural strength of eight fiber posts (one carbon fiber, one carbon/quartz fiber, one opaque quartz fiber, two translucent quartz fiber, and three glass fiber posts). Eighty fiber posts were used and divided into eight groups (n = 10): G1: C-POST (Bisco); G2: ÆSTHETI-POST (Bisco); G3: ÆSTHETI-PLUS (Bisco); G4: LIGHT-POST (Bisco); G5: D.T. LIGHT-POST (Bisco); G6: PARAPOST WHITE (Coltene); G7: FIBERKOR (Pentron); G8: REFORPOST (Angelus). All of the samples were tested using the three-point bending test. The averages obtained were submitted to the ANOVA and to Tukey's test (p < 0.05). The mean values (MPa) of the groups ÆSTHETI-POST - carbon/ quartz fiber post (Bisco) and ÆSTHETI-PLUS - quartz fiber post (Bisco) were statistically similar and higher than the mean values of the other groups. The mean values of the groups C-POST - carbon fiber post (Bisco), LIGHT-POST - translucent quartz fiber post (Bisco), D.T. LIGHT-POST - double tapered translucent quartz fiber post (Bisco), PARAPOST WHITE - glass fiber post (Coltene) and FIBREKOR - glass fiber post (Pentron) were similar and higher than the group REFORPOST - glass fiber post (Angelus). Copyright © 2005 by the American Association of Endodontists.

The effect of adhesive systems on the pullout strength of a fiberglass-reinforced composite post system in bovine teeth

Purpose: To evaluate the pullout strength of a glass fiber-reinforced composite post (glass FRC) cemented with three different adhesive systems and one resin cement. The null hypothesis was that pullout strengths yielded by the adhesive systems are similar. Materials and Methods: Thirty bovine teeth were selected. The size of the specimens was standardized at 16 mm by sectioning off the coronal portion and part of the root. The specimens were divided into three groups, according to the adhesive system, which were applied following the manufacturers' instructions: G1, ScotchBond Multi-Purpose Plus; G2, Single Bond; G3, Tyrian SPE/One-Step Plus. The glass FRCs (Reforpost) were etched with 37% H3PO4 for 1 min and silanized (Porcelain Primer). Thereafter, they were cemented with the dual resin cement En-Force. The specimens were stored for 24 h, attached to an adapted device, and submitted to the pullout test in a universal testing machine (1 mm/min). The data were submitted to the one-way ANOVA and Tukey's test (α = 0.05). Results: G1 (30.2 ± 5.8 Kgf) displayed the highest pullout strength (p < 0.001) when compared to G2 (18.6 ± 5.8 Kgf) and G3 (14.3 ± 5.8 Kgf), which were statistically similar. Analysis of the specimens revealed that all failures occurred between the adhesive system and the root dentin (pullout of the post cement), regardless of group. Conclusion: The multiple-bottle, total-etch adhesive system provided higher pullout strength of the glass FRC when compared to the single-bottle, total-etch, and single-step self-etching adhesive systems. The null hypothesis was rejected (p < 0.001).

Influence of brush type as a carrier of adhesive solutions and paper points as an adhesive-excess remover on the resin bond to root dentin

Purpose: To evaluate the influence of the brush type as a earner of priming adhesive solutions and the use of paper points as a remover of the excess of these solutions on the push-out bond strength of resin cement to bovine root dentin. The null hypotheses were that brush type and the use of paper points do not affect the bond strength. Materials and Methods: The canals of 80 single-root bovine roots (16 mm in length) were prepared at 12 mm using the preparation drill (FRC Postec Plus, Ivoclar). Half of each root was embedded in acrylic resin and the specimens were divided into 8 groups, considering the factors brush type (4 levels) and paper point (2 levels) (n = 10): Gr 1: small microbrush (Cavi-Tip, SDI); Gr 2: Microbrush (Dentsply); Gr 3: Endobrush (Bisco); Gr 4: conventional brush (Bisco); Gr 5: Cavi-Tip (SDI) + paper points; Gr 6: Microbrush (Dentsply) + paper points; Gr 7: Endobrush (Bisco) + paper points; Gr 8: conventional brush (Bisco) + paper points. The root dentin was treated with a multistep total-etch adhesive system (All Bond 2). The adhesive system was applied using each microbrush, with and without using paper points. One fiber post was molded with addition silicon and 80 posts were made of resin cement (Duolink), The resin posts were luted (Duolink resin cement), and the specimens were stored for 24 h in water at 37°C. Each specimen was cut into 4 disk-shaped samples (1.8 mm in thickness), which were submitted to the push-out test. Results: The brush type (p < 0.0001) (small microbrush > microbrush = endobrush = conventional brush) and the use of paper points (p = 0.0001) (with > without) influenced the bond strength significantly (two-way ANOVA). The null hypotheses were rejected. Conclusion: The smallest brush (Cavi-Tip) and the use of paper points significantly improved the resin bond to bovine root dentin.

Fatigue resistance of bovine teeth restored with resin-bonded fiber posts: Effect of post surface conditioning

This study evaluated the effect of post surface conditioning on the fatigue resistance of bovine teeth restored with resin-bonded fiber-reinforced composite (FRC). Root canals of 20 single-rooted bovine teeth (16 mm long) were prepared to 12 mm using a preparation drill of a double-tapered fiber post system. Using acrylic resin, each specimen was embedded (up to 3.0 mm from the cervical part of the specimen) in a PVC cylinder and allocated into one of two groups (n = 10) based on the post surface conditioning method: acid etching plus silanization or tribochemical silica coating (30 μm SiOx + silanization). The root canal dentin was etched (H2PO3 for 30 seconds), rinsed, and dried. A multi-step adhesive system was applied to the root dentin and the fiber posts were cemented with resin cement. The specimens were submitted to one million fatigue cycles. After fatigue testing, a score was given based on the number of fatigue cycles until fracture. All of the specimens were resistant to fatigue. No fracture of the root or the post and no loss of retention of the post were observed. The methodology and the results of this study indicate that tribochemical silica coating and acid etching performed equally well when dynamic mechanical loading was used.