Student Writing Performance: Identifying the Effects when Combining Planning and Revising Instructional Strategies

The purpose of the current study is to identify the impact of teaching students to revise their stories on writing production (Total Words Written; TWW), writing accuracy (Percent Correct Writing Sequences; %CWS), number of critical story elements included in stories, and quality of writing. Three third-grade and one fourth-grade student who were experiencing difficulties in the area of writing were involved in the study. The students were first taught to plan their stories using the evidence-based program, Self-Regulated Strategy Development (SRSD), which has frequently been implemented to teach students to plan their stories. Students were then taught to revise their stories using SRSD procedures modified for instruction in revision strategies. Student progress was evaluated through a multiple-probe design across tasks and a multiple-probe design across participants, which allowed for experimental control over time and across story probes. In addition to the previously mentioned variables, student’s acceptability of the intervention and their attitudes toward writing were also assessed. Results indicated that instruction in revising increased student writing accuracy beyond the effects of instruction in planning. Additionally, although instruction in planning was shown to increase writing production, number of critical story elements, and quality of writing, instruction in revising produced additional improvement in these variables as well. Finally, results indicated that students liked the intervention and their attitudes toward writing generally increased. Implications for practice and future research directions will be discussed. Advisor: Merilee McCurdy

Learning from failure--rationale and design for a study about discontinuation of randomized trials (DISCO study)

Background Randomized controlled trials (RCTs) may be discontinued because of apparent harm, benefit, or futility. Other RCTs are discontinued early because of insufficient recruitment. Trial discontinuation has ethical implications, because participants consent on the premise of contributing to new medical knowledge, Research Ethics Committees (RECs) spend considerable effort reviewing study protocols, and limited resources for conducting research are wasted. Currently, little is known regarding the frequency and characteristics of discontinued RCTs. Methods/Design Our aims are, first, to determine the prevalence of RCT discontinuation for specific reasons; second, to determine whether the risk of RCT discontinuation for specific reasons differs between investigator- and industry-initiated RCTs; third, to identify risk factors for RCT discontinuation due to insufficient recruitment; fourth, to determine at what stage RCTs are discontinued; and fifth, to examine the publication history of discontinued RCTs. We are currently assembling a multicenter cohort of RCTs based on protocols approved between 2000 and 2002/3 by 6 RECs in Switzerland, Germany, and Canada. We are extracting data on RCT characteristics and planned recruitment for all included protocols. Completion and publication status is determined using information from correspondence between investigators and RECs, publications identified through literature searches, or by contacting the investigators. We will use multivariable regression models to identify risk factors for trial discontinuation due to insufficient recruitment. We aim to include over 1000 RCTs of which an anticipated 150 will have been discontinued due to insufficient recruitment. Discussion Our study will provide insights into the prevalence and characteristics of RCTs that were discontinued. Effective recruitment strategies and the anticipation of problems are key issues in the planning and evaluation of trials by investigators, Clinical Trial Units, RECs and funding agencies. Identification and modification of barriers to successful study completion at an early stage could help to reduce the risk of trial discontinuation, save limited resources, and enable RCTs to better meet their ethical requirements.

Computer-aided operation planning and 3-dimensional osteotomy guidance for alveolar distraction

Objectives: In alveolar distraction, in cases of severe atrophy in particular, it is often difficult to perform osteotomies in order to make a transport segment in optimal size and shape. Moreover care must be taken, not to damage the closely locating anato- mical structures such as the maxillary sinus, the inferior alveolar nerve, and the roots of the neighboring teeth. For setting ideal osteotomy lines exactly, we have developed a CT-based preoperative planning tool. Methods: 3-dimensional visual reconstruction of the jaw is created from the preoperative CT scans (1.0-mm slice thick- ness). Using the image-processing software Mimics (Materialise, Yokohama, Japan), various procedures of virtual cutting are simulated first to determine optimal osteotomy lines and to design an ideal transport segment. After the computer planning, data from the virtual solid model are transferred to a rapid prototype model, and a guiding splint is made to transfer the planned surgical simulation to the actual surgery. Results: The method was used in a case of severe atrophy of the anterior maxilla. The patient had a large maxillary sinus requir- ing a precise osteotomy in this critical area. Using the splint allowing a 3-dimensional guidance, alveolar osteotomies were easily done to achieve a transport segment in sufficient dimen- sion as planned, and any perforation of the maxillary sinus could be avoided. Finally the alveolar distraction of 10mm has suc- cessfully been performed. Conclusion: The preoperative planning method and the guiding splint described here are useful in problematic cases requiring an extremely precise osteotomy due to lack of bony space.

Planning and reporting of quality-of-life outcomes in cancer trials.

BACKGROUND Information about the impact of cancer treatments on patients' quality of life (QoL) is of paramount importance to patients and treating oncologists. Cancer trials that do not specify QoL as an outcome or fail to report collected QoL data, omit crucial information for decision making. To estimate the magnitude of these problems, we investigated how frequently QoL outcomes were specified in protocols of cancer trials and subsequently reported. DESIGN Retrospective cohort study of RCT protocols approved by six research ethics committees in Switzerland, Germany, and Canada between 2000 and 2003. We compared protocols to corresponding publications, which were identified through literature searches and investigator surveys. RESULTS Of the 173 cancer trials, 90 (52%) specified QoL outcomes in their protocol, 2 (1%) as primary and 88 (51%) as secondary outcome. Of the 173 trials, 35 (20%) reported QoL outcomes in a corresponding publication (4 modified from the protocol), 18 (10%) were published but failed to report QoL outcomes in the primary or a secondary publication, and 37 (21%) were not published at all. Of the 83 (48%) trials that did not specify QoL outcomes in their protocol, none subsequently reported QoL outcomes. Failure to report pre-specified QoL outcomes was not associated with industry sponsorship (versus non-industry), sample size, and multicentre (versus single centre) status but possibly with trial discontinuation. CONCLUSIONS About half of cancer trials specified QoL outcomes in their protocols. However, only 20% reported any QoL data in associated publications. Highly relevant information for decision making is often unavailable to patients, oncologists, and health policymakers.

Planning and implementation efficacy as a determinant of health risk communication outcomes: Case studies of the U.S. Public Health Service (PHS)

This study was conducted under the auspices of the Subcommittee on Risk Communication and Education of the Committee to Coordinate Environmental Health and Related Programs (CCEHRP) to determine how Public Health Service (PHS) agencies are communicating information about health risk, what factors contributed to effective communication efforts, and what specific principles, strategies, and practices best promote more effective health risk communication outcomes.^ Member agencies of the Subcommittee submitted examples of health risk communication activities or decisions they perceived to be effective and some examples of cases they thought had not been as effective as desired. Of the 10 case studies received, 7 were submitted as examples of effective health risk communication, and 3, as examples of less effective communication.^ Information contained in the 10 case studies describing the respective agencies' health risk communication strategies and practices was compared with EPA's Seven Cardinal Rules of Risk Communication, since similar rules were not found in any PHS agency. EPA's rules are: (1) Accept and involve the public as a legitimate partner. (2) Plan carefully and evaluate your efforts. (3) Listen to the public's specific concerns. (4) Be honest, frank, and open. (5) Coordinate and collaborate with other credible sources. (6) Meet the needs of the media. (7) Speak clearly and with compassion.^ On the basis of case studies analysis, the Subcommittee, in their attempts to design and implement effective health risk communication campaigns, identified a number of areas for improvement among the agencies. First, PHS agencies should consider developing a focus specific to health risk communication (i.e., office or specialty resource). Second, create a set of generally accepted practices and guidelines for effective implementation and evaluation of PHS health risk communication activities and products. Third, organize interagency initiatives aimed at increasing awareness and visibility of health risk communication issues and trends within and between PHS agencies.^ PHS agencies identified some specific implementation strategies the CCEHRP might consider pursuing to address the major recommendations. Implementation strategies common to PHS agencies emerged in the following five areas: (1) program development, (2) building partnerships, (3) developing training, (4) expanding information technologies, and (5) conducting research and evaluation. ^

Lake Killarney Partnership: Ecological Planning with Roots in Science and Policy

Thesis (Master's)--University of Washington, 2016-06

Using QFD for e-business planning and analysis in a micro-sized enterprise

Purpose - The purpose of this paper is to show how QFD can be used as part of a structured planning and analysis framework for micro-sized enterprises to build-up their e-business capabilities. Design/methodology/approach - This case study has been produced using a new framework which integrates the balanced scorecard, value chain and quality function deployment techniques into an integrated framework known as the E-Business Planning and Analysis Framework (E-PAF). It has been produced using an action research approach. Findings - A new framework with a supporting case study is provided. This case study has demonstrated that the framework can be applied successfully to micro-sized enterprises (those with less than ten employees) to successfully plan new strategic and technical developments. This will enhance the online service that the company is able to provide. Research limitations/implications - This paper presents a single case study. The technical recommendations are currently being implemented. Originality/value - Such analytical techniques are most commonly associated with large organisations, and are not specifically associated with e-business planning. This paper provides a new framework that will be of general applicability to other similarly sized enterprises that are looking to improve e-business capabilities. © Emerald Group Publishing Limited.

Enterprise resource planning and the post bureaucratic organization:'formalization' as trust in the system versus 'solidarity' as trust in individuals

Purpose – The purpose of the paper is to use a case study setting involving the implementation of an enterprise resource planning (ERP) system to expose and analyze the conflicts in the characterizations of the post bureaucratic organisation (PBO) in the literature. ERP implementations are often accompanied by increasing levels of stress in organizations that place pressures on organizational relationships and structures. Additionally, ERPs are regarded as introducing their own techno-logic of centralization, standardization and formalization that provides an apparent contrast to the exhortations about employee empowerment. Design/methodology/approach – A case study of ERP implementation in a medium-sized entity is presented. The paper explores aspects of ERP and PBO from the context of postmodern organization theory. Findings – Some concerns about PBO identified in the literature are reflected in the case situation. For example, there is a commitment to give up private time and work flexibly by some employees. The paper also provides evidence of the way the management team substitute their reliance on a key individual knowledge worker for that of an ERP system and external vendor support. Paradoxically, trust in that same knowledge worker and between core users of the system is essential to enable the implementation of the system. Originality/value – This paper adds empirical insight to a predominantly theoretical literature. The case evidence indicates some conflicting implications in the concurrent adoption of PBO and ERP.

Modelling manufacturing planning and control systems:the application of object-oriented principles and discrete-event simulation

Manufacturing planning and control systems are fundamental to the successful operations of a manufacturing organisation. 10 order to improve their business performance, significant investment is made by companies into planning and control systems; however, not all companies realise the benefits sought Many companies continue to suffer from high levels of inventory, shortages, obsolete parts, poor resource utilisation and poor delivery performance. This thesis argues that the fit between the planning and control system and the manufacturing organisation is a crucial element of success. The design of appropriate control systems is, therefore, important. The different approaches to the design of manufacturing planning and control systems are investigated. It is concluded that there is no provision within these design methodologies to properly assess the impact of a proposed design on the manufacturing facility. Consequently, an understanding of how a new (or modified) planning and control system will perform in the context of the complete manufacturing system is unlikely to be gained until after the system has been implemented and is running. There are many modelling techniques available, however discrete-event simulation is unique in its ability to model the complex dynamics inherent in manufacturing systems, of which the planning and control system is an integral component. The existing application of simulation to manufacturing control system issues is limited: although operational issues are addressed, application to the more fundamental design of control systems is rarely, if at all, considered. The lack of a suitable simulation-based modelling tool does not help matters. The requirements of a simulation tool capable of modelling a host of different planning and control systems is presented. It is argued that only through the application of object-oriented principles can these extensive requirements be achieved. This thesis reports on the development of an extensible class library called WBS/Control, which is based on object-oriented principles and discrete-event simulation. The functionality, both current and future, offered by WBS/Control means that different planning and control systems can be modelled: not only the more standard implementations but also hybrid systems and new designs. The flexibility implicit in the development of WBS/Control supports its application to design and operational issues. WBS/Control wholly integrates with an existing manufacturing simulator to provide a more complete modelling environment.

Planning and decision-making for energy recovery from waste at the sub-regional level

This research project has developed a novel decision support system using Geographical Information Systems and Multi Criteria Decision Analysis and used it to develop and evaluate energy-from-waste policy options. The system was validated by applying it to the UK administrative areas of Cornwall and Warwickshire. Different strategies have been defined by the size and number of the facilities, as well as the technology chosen. Using sensitivity on the results from the decision support system, it was found that key decision criteria included those affected by cost, energy efficiency, transport impacts and air/dioxin emissions. The conclusions of this work are that distributed small-scale energy-from-waste facilities score most highly overall and that scale is more important than technology design in determining overall policy impact. This project makes its primary contribution to energy-from-waste planning by its development of a Decision Support System that can be used to assist waste disposal authorities to identify preferred energy-from-waste options that have been tailored specifically to the socio-geographic characteristics of their jurisdictional areas. The project also highlights the potential of energy-from-waste policies that are seldom given enough attention to in the UK, namely those of a smaller-scale and distributed nature that often have technology designed specifically to cater for this market.

A unified classification of manufacturing strategies and design processes

This article categorises manufacturing strategy design processes and presents the characteristics of resulting strategies. This work will therefore assist practitioners to appreciate the implications of planning activities. The article presents a framework for classifying manufacturing strategy processes and the resulting strategies. Each process and respective strategy is then considered in detail. In this consideration the preferred approach is presented for formulating a world class manufacturing strategy. Finally, conclusions and recommendations for further work are given.

Was it good for them? Reflections on the use of MENTOR and changes in course design using general performance measures

This paper considers the use of general performance measures in evaluating specific planning and design decisions in higher education and reflects on the students' learning process. Specifically, it concerns the use of the MENTOR multimedia computer aided learning package for helping students learn about OR as part of a general business degree. It includes the transfer of responsibility for a learning module to a new staff member and a change from a single tutor to a system involving multiple tutors. Student satisfaction measures, learning outcome measures and MENTOR usage patterns are examined in monitoring the effects of the changes in course delivery. The results raise some questions about the effectiveness of general performance measures in supporting specific decisions relating to course design and planning.

Managing enterprise resource planning and multi-organisational enterprise governance:a new contingency framework for the enterprisation of operations

This research has been undertaken to determine how successful multi-organisational enterprise strategy is reliant on the correct type of Enterprise Resource Planning (ERP) information systems being used. However there appears to be a dearth of research as regards strategic alignment between ERP systems development and multi-organisational enterprise governance as guidelines and frameworks to assist practitioners in making decision for multi-organisational collaboration supported by different types of ERP systems are still missing from theoretical and empirical perspectives. This calls for this research which investigates ERP systems development and emerging practices in the management of multi-organisational enterprises (i.e. parts of companies working with parts of other companies to deliver complex product-service systems) and identify how different ERP systems fit into different multi-organisational enterprise structures, in order to achieve sustainable competitive success. An empirical inductive study was conducted using the Grounded Theory-based methodological approach based on successful manufacturing and service companies in the UK and China. This involved an initial pre-study literature review, data collection via 48 semi-structured interviews with 8 companies delivering complex products and services across organisational boundaries whilst adopting ERP systems to support their collaborative business strategies – 4 cases cover printing, semiconductor manufacturing, and parcel distribution industries in the UK and 4 cases cover crane manufacturing, concrete production, and banking industries in China in order to form a set of 29 tentative propositions that have been validated via a questionnaire receiving 116 responses from 16 companies. The research has resulted in the consolidation of the validated propositions into a novel concept referred to as the ‘Dynamic Enterprise Reference Grid for ERP’ (DERG-ERP) which draws from multiple theoretical perspectives. The core of the DERG-ERP concept is a contingency management framework which indicates that different multi-organisational enterprise paradigms and the supporting ERP information systems are not the result of different strategies, but are best considered part of a strategic continuum with the same overall business purpose of multi-organisational cooperation. At different times and circumstances in a partnership lifecycle firms may prefer particular multi-organisational enterprise structures and the use of different types of ERP systems to satisfy business requirements. Thus the DERG-ERP concept helps decision makers in selecting, managing and co-developing the most appropriate multi-organistional enterprise strategy and its corresponding ERP systems by drawing on core competence, expected competitiveness, and information systems strategic capabilities as the main contingency factors. Specifically, this research suggests that traditional ERP(I) systems are associated with Vertically Integrated Enterprise (VIE); whilst ERPIIsystems can be correlated to Extended Enterprise (EE) requirements and ERPIII systems can best support the operations of Virtual Enterprise (VE). The contribution of this thesis is threefold. Firstly, this work contributes to a gap in the extant literature about the best fit between ERP system types and multi-organisational enterprise structure types; and proposes a new contingency framework – the DERG-ERP, which can be used to explain how and why enterprise managers need to change and adapt their ERP information systems in response to changing business and operational requirements. Secondly, with respect to a priori theoretical models, the new DERG-ERP has furthered multi-organisational enterprise management thinking by incorporating information system strategy, rather than purely focusing on strategy, structural, and operational aspects of enterprise design and management. Simultaneously, the DERG-ERP makes theoretical contributions to the current IS Strategy Formulation Model which does not explicitly address multi-organisational enterprise governance. Thirdly, this research clarifies and emphasises the new concept and ideas of future ERP systems (referred to as ERPIII) that are inadequately covered in the extant literature. The novel DERG-ERP concept and its elements have also been applied to 8 empirical cases to serve as a practical guide for ERP vendors, information systems management, and operations managers hoping to grow and sustain their competitive advantage with respect to effective enterprise strategy, enterprise structures, and ERP systems use; referred to in this thesis as the “enterprisation of operations”.

A dynamic feature information model for integrated manufacturing planning and optimization

This paper presents a new, dynamic feature representation method for high value parts consisting of complex and intersecting features. The method first extracts features from the CAD model of a complex part. Then the dynamic status of each feature is established between various operations to be carried out during the whole manufacturing process. Each manufacturing and verification operation can be planned and optimized using the real conditions of a feature, thus enhancing accuracy, traceability and process control. The dynamic feature representation is complementary to the design models used as underlining basis in current CAD/CAM and decision support systems. © 2012 CIRP.

Incorporating Water Sensitive Urban Design (WSUD) practices into the planning context:the conceptual case for lot-scale developments

In recent decades, a number of sustainable strategies and polices have been created to protect and preserve our water environments from the impacts of growing communities. The Australian approach, Water Sensitive Urban Design (WSUD), defined as the integration of urban planning and design with the urban water cycle management, has made considerable advances on design guidelines since 2000. WSUD stormwater management systems (e.g. wetlands, bioretentions, porous pavement etc), also known as Best Management Practices (BMPs) or Low Impact Development (LID), are slowly gaining popularity across Australia, the USA and Europe. There have also been significant improvements in how to model the performance of the WSUD technologies (e.g. MUSIC software). However, the implementation issues of these WSUD practices are mainly related to ongoing institutional capacity. Some of the key problems are associated with a limited awareness of urban planners and designers; in general, they have very little knowledge of these systems and their benefits to the urban environments. At the same time, hydrological engineers should have a better understanding of building codes and master plans. The land use regulations are equally as important as the physical site conditions for determining opportunities and constraints for implementing WSUD techniques. There is a need for procedures that can make a better linkage between urban planners and WSUD engineering practices. Thus, this paper aims to present the development of a general framework for incorporating WSUD technologies into the site planning process. The study was applied to lot-scale in the Melbourne region, Australia. Results show the potential space available for fitting WSUD elements, according to building requirements and different types of housing densities. © 2011 WIT Press.