Gas-bearing fluid influx sub-system for gas hydrate geological system in Shenhu Area, Northern South China Sea

Based on the comprehensive interpretation and study of the Neogene fracture system and diapiric structure, it can be concluded that the diapiric structures, high-angle fractures and vertical fissure system are the main gas-bearing fluid influx sub-system for gas hydrate geological system in Shenhu Area, northern South China Sea. The Neogene fractures widely developed in the study area may be classed into two groups: NW (NNW)-trending and NE (NNE)-trending. The first group was active in the Late Miocene, while the second one was active since the Pliocene. The NE (NNE)-trending fractures were characterized by lower activity strength and larger scale, and cut through the sediment layers deposited since the Pliocene. Within the top sediment layers, the high-angle fracture and vertical fissure system was developed. The diapiric structures display various types such as a turtle-back-like arch, weak piercing, gas chimney, and fracture (or crack, fissure). On the seismic profile, some diapiric structures show the vertical chimney pathway whose top is narrow and the bottom is wide, where some ones extend horizontally into pocket or flower-shaped structures and formed the seismic reflection chaotic zones. Within the overlying sediment layers of the diapiric structure, the tree branch, flower-shaped high-angle fractures and vertical fissures were developed and became the pathway and migration system of the gas-bearing fluid influx. In the study area, the diapiric structures indicate a high temperature/over pressure system ever developed. Closely associated and abundant bright-spots show the methane-bearing fluid influx migrated vertically or horizontally through the diapiric structures, high-angle fractures and vertical fissures. In the place where the temperature and pressure conditions were favor for the formation of gas hydrate, the hydrate reservoir deposition sub-system was developed.

The hydrodynamics of small seabed mounted bottom hinged wave energy converters in shallow water:PhD thesis

This thesis investigates the hydrodynamics of a small, seabed mounted, bottom hinged, wave energy converter in shallow water. The Oscillating Wave Surge Converter is a pitching flap-type device which is located in 10-15m of water to take advantage of the amplification of horizontal water particle motion in shallow water. A conceptual model of the hydrodynamics of the device has been formulated and shows that, as the motion of the flap is highly constrained, the magnitude of the force applied to the flap by the wave is strongly linked to the power absorption.

An extensive set of experiments has been carried out in the wave tank at Queen’s University at both 40th and 20th scales. The experiments have included testing in realistic sea states to estimate device performance as well as fundamental tests using small amplitude monochromatic waves to determine the force applied to the flap by the waves. The results from the physical modelling programme have been used in conjunction with numerical data from WAMIT to validate the conceptual model.

The work finds that tuning the OWSC to the incident wave periods is problematic and only results in a marginal increase in power capture. It is also found that the addition of larger diameter rounds to the edges of the flap reduces viscous losses and has a greater effect on the performance of the device than tuning. As wave force is the primary driver of device performance it is shown that the flap should fill the water column and should pierce the water surface to reduce losses due to wave overtopping.

With the water depth fixed at approximately 10m it is shown that the width of the flap has the greatest impact on the magnitude of wave force, and thus device performance. An 18m wide flap is shown to have twice the absorption efficiency of a 6m wide flap and captures 6 times the power. However, the increase in power capture with device width is not limitless and a 24m wide flap is found to be affected by two-dimensional hydrodynamics which reduces its performance per unit width, especially in sea states with short periods. It is also shown that as the width increases the performance gains associated with the addition of the end effectors reduces. Furthermore, it is shown that as the flap width increases the natural pitching period of the flap increases, thus detuning the flap further from the wave periods of interest for wave energy conversion.

The effect of waves approaching the flap from an oblique angle is also investigated and the power capture is found to decrease with the cosine squared of the encounter angle. The characteristic of the damping applied by the power take off system is found to have a significant effect on the power capture of the device, with constant damping producing between 20% and 30% less power than quadratic damping. Furthermore, it is found that applying a higher level of damping, or a damping bias, to the flap as it pitches towards the beach increases the power capture by 10%.

A further set of experiments has been undertaken in a case study used to predict the power capture of a prototype of the OWSC concept. The device, called the Oyster Demonstrator, has been developed by Aquamarine Power Ltd. and is to be installed at the European Marine Energy Centre, Scotland, in 2009.

The work concludes that OWSC is a viable wave energy converter and absorption efficiencies of up 75% have been measured. It is found that to maximise power absorption the flap should be approximately 20m wide with large diameter rounded edges, having its pivot close to the seabed and its top edge piercing the water surface.

How does Oyster work? The simple interpretation of Oyster mathematics

Oyster® is a surface-piercing flap-type device designed to harvest wave energy in the nearshore environment. Established mathematical theories of wave energy conversion, such as 3D point-absorber and 2D terminator theory, are inadequate to accurately describe the behaviour of Oyster, historically resulting in distorted conclusions regarding the potential of such a concept to harness the power of ocean waves. Accurately reproducing the dynamics of Oyster requires the introduction of a new reference mathematical model, the “flap-type absorber”. A flap-type absorber is a large thin device which extracts energy by pitching about a horizontal axis parallel to the ocean bottom. This paper unravels the mathematics of Oyster as a flap-type absorber. The main goals of this work are to provide a simple–yet accurate–physical interpretation of the laws governing the mechanism of wave power absorption by Oyster and to emphasise why some other, more established, mathematical theories cannot be expected to accurately describe its behaviour.

Calcification and ossification of the convexity of the falx cerebri and related subdural space in human cadavers

OBJECTIVE: The present work was planned to report the incidence of calcification and ossification of an isolated cranial dural fold. The form, degree of severity and range of extension of such changes will be described. Involvement of the neighboring brain tissue and blood vessels, whether meningeal or cerebral, will also be determined. The results of this study might highlight the occasional incidence of intracranial calcification and ossification in images of the head and their interpretation, by radiologists and neurologists, to be of dural or vascular origin.

METHODS: Two human formalin-fixed cadavers, one middle-aged female another older male, were investigated at the Anatomy Laboratory, College of Medicine, King Faisal University, Dammam, Kingdom of Saudi Arabia during the period from 2000 to 2003. In each cadaver, the skullcap was removed and the convexity of the cranial dura mater, as well as the individual dural folds, were carefully examined for any calcification or ossification. The meningeal and cerebral blood vessels together with the underlying brain were grossly inspected for such structural changes. Calcified or ossified tissues, when identified, were subjected to histological examination to confirm their construction.

RESULTS: The female cadaver showed a calcified parietal emissary vein piercing the skullcap and projecting into the scalp. The latter looked paler and deficient in hair on its right side. The base of the stump was surrounded by a granular patch of calcification. The upper convex border of the falx cerebri was hardened and it presented granules, plaques and a cauliflower mass, which all proved to be osseous in structure. The meningeal and right cerebral vessels were mottled with calcium granules. The underlying temporal and parietal lobes of the right cerebral hemisphere were degenerated. The male cadaver also revealed a calcified upper border of the falx cerebri and superior sagittal sinus. Osseous granules and plaques, similar to those of the first specimen, were also identified but without gross changes in the underlying brain.

CONCLUSION: Calcification or ossification of an isolated site of the cranial dura mater and the intracranial blood vessels might occur. These changes should be kept in mind while interpreting images of the skull and brain. Clinical assessment and laboratory investigations are required to determine whether these changes are idiopathic, traumatic, or as a manifestation of a generalized disease such as hyperparathyroidism, vitamin D-intoxication, or chronic renal failure.

The Vertical Distribution and Evolution of Slam Pressure on an Oscillating Wave Surge Converter

The accurate definition of the extreme wave loads which act on offshore structures represents a significant challenge for design engineers and even with decades of empirical data to base designs upon there are still failures attributed to wave loading. The environmental conditions which cause these loads are infrequent and highly non-linear which means that they are not well understood or simple to describe. If the structure is large enough to affect the incident wave significantly further non-linear effects can influence the loading. Moreover if the structure is floating and excited by the wave field then its responses, which are also likely to be highly non-linear, must be included in the analysis. This makes the description of the loading on such a structure difficult to determine and the design codes will often suggest employing various tools including small scale experiments, numerical and analytical methods, as well as empirical data if available.
Wave Energy Converters (WECs) are a new class of offshore structure which pose new design challenges, lacking the design codes and empirical data found in other industries. These machines are located in highly exposed and energetic sites, designed to be excited by the waves and will be expected to withstand extreme conditions over their 25 year design life. One such WEC is being developed by Aquamarine Power Ltd and is called Oyster. Oyster is a buoyant flap which is hinged close to the seabed, in water depths of 10 to 15m, piercing the water surface. The flap is driven back and forth by the action of the waves and this mechanical energy is then converted to electricity.
It has been identified in previous experiments that Oyster is not only subject to wave impacts but it occasionally slams into the water surface with high angular velocity. This slamming effect has been identified as an extreme load case and work is ongoing to describe it in terms of the pressure exerted on the outer skin and the transfer of this short duration impulsive load through various parts of the structure.
This paper describes a series of 40th scale experiments undertaken to investigate the pressure on the face of the flap during the slamming event. A vertical array of pressure sensors are used to measure the pressure exerted on the flap. Characteristics of the slam pressure such as the rise time, magnitude, spatial distribution and temporal evolution are revealed. Similarities are drawn between this slamming phenomenon and the classical water entry problems, such as ship hull slamming. With this similitude identified, common analytical tools are used to predict the slam pressure which is compared to that measured in the experiment.

Extreme Loads on an Oscillating Wave Surge Converter

A major difficulty in the design of full scale Wave Energy Converters is the need to design for two conflicting design criteria. In one instance devices must be designed to couple heavily to the incident wave force resulting in the efficient extraction of energy in small sea states, however devices must also be capable of withstanding the harsh conditions encountered during extreme seas. This paper presents an initial investigation of the extreme wave loading of a generic, surface-piercing, pitching flap-type device deployed in near shore wave conditions. Slamming of the flap is selected as the extreme load event for further investigation and the experimental methodologies employed are described. Preliminary results showing both local and global loading under such events are presented for the case of a flap tested in a 3-dimensional environment. Results are presented which show flap slamming effects on the pressures experienced on the front face of the flap.

Levantamiento del velo corporativo. Panorama y perspectivas. El caso colombiano

Son múltiples y constantes los debates que se han dado en la comunidad jurídica nacional sobre permitir que los socios o accionistas de una sociedad respondan directamente con su patrimonio por las acreencias de la persona jurídica a través de la utilización de la "teoría del levantamiento del velo corporativo". Dada la importancia de este tema, expertos colombianos de primer nivel se reúnen en esta obra para exponer sus puntos de vista sobre la aplicación de esta institución en Colombia. Adicionalmente, este libro incluye el informe de ejecución del proyecto de investigación , adelantado por la línea de investigación en Derecho Comercial del Grupo de Derecho Privado de la Facultad de Jurisprudencia, el cual fue financiado por el Centro de Investigaciones, Estudios y Consultoría (CIEC) de la Universidad del Rosario.Dada la importancia de este tema, expertos colombianos de primer nivel se reúnen en esta obra para exponer sus puntos de vista sobre la aplicación de esta institución en Colombia.

El tatuaje como picto-escritura corporal: identidades basadas en la sensibilidad

La presente investigación es un acercamiento a las nuevas sensibilidades a través del tatuaje y del piercing como nuevas prácticas culturales. Presenta una discusión sobre lo que se podría denominar una nueva estética corporal a partir de la transgresión, el exceso y los límites. El tatuaje es una forma de escritura que en el cuerpo evoca una memoria y, además dentro del entorno hedonista y posmodemo que caracteriza a la sociedad contemporánea, constituye una forma de apropiación del cuerpo y de construcción identitaria que va más allá de la memoria :vista hacia una forma de ser de los individuos que se sienten capaces de lograr una especie de liberación de las ataduras convencionales que rodean a los discursos del consumo. De alguna manera este trabajo. discute las nociones de "cuerpo ilustrado" y de "escritura corporal" pero en las dimensiones de la experiencia que se puede lograr a través del dolor, de la conciencia de los sentidos, de la necesidad de explorar otras dimensiones sensoriales y la impregnación de las experiencias y vivencias personales en el cuerpo. Todo este análisis se realiza mediante el acercamiento de los discursos que plantean jóvenes estudiantes universitarios y tatuistas en la ciudad de Quito.

Inkzine : Redesignandet av en tatuerings- och piercingcommunity

Our employer, Gaddad, is a tattoo and piercing community that was created in 2006 with the basic idea to make it easier for people to get in touch with the tattoo artists and piercers from all over Sweden. With the homepage’s popularity at 2009 they decided to expand with the news page Inkzine. 2011 they contacted us with a plan to expand the homepage to Europe and then merge their two sites under the name Inkzine.The goal of this project was to create design suggestions for Gaddad / Inkzine that both the administration and the current users liked and would consider implementing on the website. In order to evaluate the current design and our suggestions we decided to use two questionnaires . The first questionnaire evaluated the currentdesign to provide us with information for the redesign. The second questionnaire evaluated our new suggestions.With these questionnaire we also carried out an analysis to see the differences in opinions among the users and also between the administration and the users.We also investigated other community homepages, company homepages that had been internationalized, and other tattoo homepages. To see what others had done to adapt to the international market and to investigate the design of tattoo homepages.We also did literary studies in redesign and internationalization, in order to obtain a theoretical foundation for our work.The results of the investigation of other homepages showed that in order to perform an internationalization of a web site no major changes to the looks were necessary, only linguistic changes. The results of our questionnairesshowed that users had in most cases put the majority of their votes on

Minimization of stock weight during close-die forging of a spindle

In this paper, Finite Element method and full-scale experiments have been used to study a hot forging method for fabri-cation of a spindle using reduced initial stock size. The forging sequence is carried out in two stages. In the first stage, the hot rolled cylindrical billet is pre-formed and pierced in a closed die using a spherical nosed punch to within 20 mm of its base. This process of piercing or impact extrusion leads to high strains within the work piece but requires high press loads. In the second stage, the resulting cylinder is placed in a die with a flange chamber and upset forged to form a flange. The stock mass is optimized for complete die filling. Process parameters such as effective strain distribution, material flow and forging load in different stages of the process are analyzed. It is concluded from the simulations that minor modifications of piercing punch geometry to reduce contact between the punch and emerging vertical walls of the cylinder appreciably reduces the piercing load. In the flange chamber, a die surfaces angle of 52° instead of 45° is pro-posed to ensure effective material flow and exert sufficient tool pressure to achieve complete cavity filling. In order to achieve better compression, it is also proposed to shorten both the length of the inserted punch and the die “tongues” by a few mm.

Responsabilidade tributária de grupos econômicos

A presente pesquisa tem por objetivo investigar a responsabilidade tributária de grupos econômicos. Para tanto, analisa inicialmente o que é grupo econômico a partir da evolução da organização da empresa, verificando as formas de regulação no direito societário, bem como nos demais ramos do direito, especialmente o tributário. Em seguida, se debruça sobre a limitação da responsabilidade, a desconsideração da personalidade jurídica e a responsabilidade tributária. Verifica, então, em quais hipóteses poderia haver a responsabilidade tributária de grupos econômicos, sendo analisadas as possibilidades com fundamento legal no art. 30, IX, da Lei nº 8.212/91; art. 124 da Lei nº 5.172/66; art. 50 da Lei nº 10.406/2002; art. 990 da Lei nº 10.406/02 combinado com o art. 126, III, da Lei nº 5.172/66; e art. 116, §1º, da Lei nº 5.172/66. Por fim, aborda aspectos processuais da responsabilidade de grupos econômicos, com enfoque no incidente de desconsideração da personalidade jurídica previsto no Código de Processo Civil de 2015.

Avaliação de quitosana, aplicada em pós-colheita, na proteção de uva 'Itália' contra Botrytis cinerea

Perdas significativas ocorrem durante o armazenamento e a comercialização de uvas de mesa devido, principalmente, à ocorrência do mofo cinzento (Botrytis cinerea Pers.:Fr.) e, para o controle de patógenos emprega-se, geralmente, o dióxido de enxofre (SO2). Diante da restrição crescente ao uso de produtos químicos em pós-colheita, tem ocorrido considerável interesse em métodos alternativos de controle. Este trabalho teve como principal objetivo avaliar os efeitos da quitosana, na proteção pós-colheita de uva 'Itália' contra B. cinerea. In vivo, avaliou-se o efeito direto e indireto da quitosana pelo tratamento dos cachos de uva, antes e após a inoculação com o patógeno. Utilizou-se quitosana nas concentrações de 0,00; 0,25; 0,50; 1,00; 1,50 e 2,00 % (v/v). Para inoculação, em 10 bagas de cada cacho de uva foram feitos ferimentos de ±2 mm de profundidade, procedendo-se em seguida, a aspersão da suspensão de conídios (±10(5) conídios.mL-1) de B. cinerea. Após os tratamentos, os cachos foram mantidos a 25±1 °C / 80-90 % UR e avaliados diariamente quanto à incidência e severidade da podridão. Avaliações in vitro do efeito do produto sobre o patógeno também foram realizadas analisando-se o crescimento micelial e a germinação dos conídios de B. cinerea. A solução de quitosana, nas concentrações de 1,5 e 2,0 % (v/v), quando empregada após a inoculação com B cinerea, reduziu significativamente o índice de doença no entanto, quando os cachos foram tratados antes da inoculação, não houve efeito significativo do tratamento sobre o desenvolvimento da doença. Nos ensaios in vitro, a solução de quitosana, nas maiores concentrações, suprimiu o crescimento micelial do patógeno e retardou a germinação dos conídios.

Acidente com material perfurocortante entre profissionais de enfermagem de um hospital universitário

Os riscos ocupacionais a que os profissionais da equipe de enfermagem estão sujeitos no desempenho de suas funções são consideráveis. Assim estabeleceu-se como objetivo deste estudo analisar os acidentes perfurocortantes no período de 2002 a 2006, envolvendo a equipe de enfermagem de um hospital universitário, para compreender o contexto em que ocorrem. A utilização destas informações pode ser ferramenta de prevenção. Estudo descritivo, retrospectivo quantitativo e qualitativo. Na análise quantitativa foi utilizada estatística descritiva e na qualitativa o discurso do sujeito coletivo. Por meio das fichas de notificação do Núcleo de Vigilância Epidemiológica do Hospital, foi possível identificar acidentes do gênero no período pesquisado. Entrevistas foram direcionadas às vítimas de acidentes que tiveram como paciente-fonte portador de Síndrome da Imunodeficiência Adquirida/ Vírus da Imunodeficiência Humana, hepatite B e C. Os achados demonstraram que ainda persiste um grau significativo do desconhecimento ou banalização dos acidentes entre profissionais da saúde.

Avaliação de agentes bióticos e abióticos aplicados em pós-colheita na proteção de uva Itália contra Botrytis cinerea

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo da soroprevalência da co-infecção pelo Vírus da hepatite C (VHC) em pacientes portadores do Vírus da imunodeficiência humana 1 (HIV-1) e/ou com SIDA/AIDS no Estado do Amapá

No presente estudo a soroprevalência da infecção pelo Vírus da hepatite C (VHC) foi investigada em indivíduos portadores da infecção pelo Vírus da imunodeficiência humana 1 (HIV-1) da cidade de Macapá, Estado do Amapá, Brasil. Um total de 120 indivíduos infectados pelo HIV-1 foi testado para a presença de anti-VHC usando um ensaio imunoabsorvente ligado a enzima. Todos os pacientes envolvidos no presente estudo foram testados para a carga viral plasmática do HIV-1 e para os níveis de células T CD4⁺ no momento do consentimento em fazer parte do estudo. Os pacientes responderam a um questionário epidemiológico no momento da coleta de sangue. Do total de 120 amostras testadas apenas sete (5,83%) foram soropositivas para anti-VHC. Quanto ao gênero, quatro (57,2%) e três (42,8%) eram homens e mulheres, respectivamente. A idade dos indivíduos soropositivos para anti-VHC variou de 21 a 40 anos entre os homens e de 21 a 60 entre as mulheres. Considerando o impacto da coinfecção nos valores de carga viral plasmática do HIV-1 e na contágem de células T CD4⁺ não foram observadas diferenças significativas (Odds Ratio=2,7368, p=0,3624; Odds Ratio=1,7803, p=0,7764). O uso de drogas injetáveis e de piercing mostrou ser um importante fator de risco para a co-infecção (p<0,05). Os resultados do presente estudo representam os primeiros achados acerca da co-infecção HIV-1/VHC no Estado do Amapá e demonstra a necessidade de um estudo continuado objetivando avaliar a soroprevalência da infecção pelo VHC no Amapá e detectar o real impacto clinico da co-infecção HIV-1/VHC no paciente.