Evaluating the Effectiveness of Post Fire Emergency Rehabilitation Treatments on Soil Degradation and Erosion Control in Semi-Arid Mediterranean Areas of the Spanish South East

In this study, we seeded a native plant species and applied a mulch of chopped wood originating from the same burned area to avoid the establishment of invasive species. We evaluated four treatments: (1) seeding, (2) mulch, (3) seeding and mulch, and (4) control. Our objective was to increase plant recovery and to minimize the soil erosion and degradation. The study was conducted in Alicante, Spain in Torremanzanas forest of the semi-arid Mediterranean bioclimatic area after the wildfire of November, 2002. During three years of monitoring, we find that combined treatment: seeding and mulch increased the post fire plant recovery 20% approximately more than the rest of treatments and the control plots. We also found that seven months after treating mulch and seeding and mulch treatments presented a gain of soil: +5.18 to + 5.24 mm while the seeding treatment and control plots presented soil loss rates of: −0.48 to −0.49 mm. In addition, mulch treatment significantly decreased soil compaction to the half, and increased the infiltration capacity to 40 ml.mn−1 more than in plots without mulch, as well as increased the soil respiration to the double compared with no mulch plots. Work in progress confirms the positive effect of chopped wood as mulching treatment with or without seeding on the soil protection against soil erosion, and the amelioration of bio-physical properties after wildfires in the Mediterranean semi-arid burned areas.

Physical properties and bulk organic geochemical results for sediments from DSDP Hole 96-619

The concentration and carbon isotopic composition (d13C) of sedimentary organic carbon (C_org), N/C ratios, and terrigenous and marine d13C_org endmembers form a basis from which to address problems of Late Quaternary glacial-interglacial climatic variability in a 208.7 m hydraulic piston core (DSDP 619) from the Pigmy Basin in the northern Gulf of Mexico. While interpretations of sedimentary d13C_org time series records are often not unique, paired analyses of d13C_org and N/C are consistent with the hypothesis that the C_org in the Pigmy Basin is a climatically determined mixture of C3-photosynthetic terrigenous and marine organic matter, confirming the earlier d13C_org model of Sackett (1964). A high resolution (~1.4-2.9 Ka/sample) d13C_org record shows that sedimentary organic carbon in interglacial oxygen isotope (sub)stages 1 and 5a-b are enriched in 13C (average +/-1 sigma values are -24.2+/-1.2? and -22.9+/-0.7? relative to PDB, respectively) while glacial isotope stage values 2 are relatively depleted (-25.6+/-0.5?). Concentrations of terrigenous and marine sedimentary organic carbon are calculated for the first time using d13C_org and C_org measurements, and empirically determined terrigenous and marine d13C_org endmembers. The net accumulation rate of terrigenous organic carbon is 4.3+/-2.6 times higher in isotope stages 2-4 than in (sub)stages 1 and 5a-b, recording higher erosion rates of terrigenous organic material in glacial times. The concentration and net accumulation rates of marine and terrigenous C_org suggest that the nutrient-bearing plume of the Mississippi River may have advanced and retreated across the Pigmy Basin as sea level fell and rose in response to glacial-interglacial sea level change.

Soil depletion estimates : version 2 : a user's guide to a personal computer model for estimating long-term onsite physical and economic impacts of soil depletion /

"January 1990"--P. iii.

Physical land conditions on the San Mateo county soil conservation district, California ...

Mode of access: Internet.

Management of a previously eroded tropical Alfisol with herbaceous legumes: Soil loss and physical properties under mound tillage

A study was carried out on a previously eroded Oxic Paleustalf in Ibadan, southwestern Nigeria to determine the extent of soil degradation under mound tillage with some herbaceous legumes and residue management methods. A series of factorial experiments was carried out on 12 existing runoff plots. The study commenced in 1996 after a 5-year natural fallow. Mound tillage was introduced in 1997 till 1999. The legumes - Vigna unguiculata (cowpea), Mucuna pruriens and Pueraria phaseoloides - were intercropped with maize in 1996 and 1998 while yam was planted alone in 1997 and 1999. This paper covers 1997-1999. At the end of each year, residues were either burned or mulched on respective plots. Soil loss, runoff, variations in mound height, bulk density, soil water retention and sorptivity were measured. Cumulative runoff was similar among interactions of legume and residue management in 1997 (57-151 mm) and 1999 (206-397 mm). However, in 1998, cumulative runoff of 95 mm observed for Mucuna-burned residue was significantly greater than the 46 mm observed for cowpea-burned residue and the 39-51 mm observed for mulched residues of cowpea, Mucuna and Pueraria. Cumulative soil loss of 7.6 Mg ha(-1) observed for Mucuna-burned residue in 1997 was significantly greater than those for Pueraria-mulched (0.9 Mg ha(-1)) and Mucuna-mulched (1.4 Mg ha(-1)) residues whereas in 1999 it was similar to soil loss from cowpea treatments and Pueraria-burned residue (2.3-5.3 Mg ha(-1)). There were no significant differences in soil loss in 1998 (1-3.2 Mg ha(-1)) whereas Mucuna-burned residue had a greater soil loss (28.6 Mg ha(-1)) than mulched cowpea (6.9 Mg ha(-1)) and Pueraria (5.4 Ms ha(-1)). Mound heights (23 cm average) decreased non-linearly with cumulative rainfall. A cumulative rainfall of 500 mm removed 0.3-2.3 cm of soil from mounds in 1997, 3.5-6.9 cm in 1998 and 2.3-4.6 cm in 1999, indicating that (detached but less transported) soil from mounds was far higher than observed soil loss in each year. Soil water retention was improved at potentials ranging from -1 to -1500 kPa by Mucuna-mulched residue compared to the various burned-residue treatments. Also, mound sorptivity at -1 cm water head (14.3 cm h(-1/2)) was higher than furrow sorptivity (8.5 cm h(-1/2)), indicating differences in hydraulic characteristics between mound and furrow. Pueraria-mulched residues for mounds had the highest sorptivity of 17.24 cm h(-1/2), whereas the least value of 6.96 cm h(-1/2) was observed in furrow of Mucuna-burned residue. Pueraria phas eoloides was considered the best option for soil conservation on the previously eroded soil, cultivated with mound tillage. (c) 2005 Elsevier B.V. All rights reserved.

Using computational fluid dynamics in combating erosion-corrosion

Computational fluid dynamics was used to search for the links between the observed pattern of attack seen in a bauxite refinery's heat exchanger headers and the hydrodynamics inside the header. Validation of the computational fluid dynamics results was done by comparing then with flow parameters measured in a 1:5 scale model of the first pass header in the laboratory. Computational fluid dynamics simulations were used to establish hydrodynamic similarity between the 1:5 scale and full scale models of the first pass header. It was found that the erosion-corrosion damage seen at the tubesheet of the first pass header was a consequence of increased levels of turbulence at the tubesheet caused by a rapidly turning flow. A prismatic flow corrections device introduced in the past helped in rectifying the problem at the tubesheet but exaggerated the erosion-corrosion problem at the first pass header shell. A number of alternative flow correction devices were tested using computational fluid dynamics. Axial ribbing in the first pass header and an inlet flow diffuser have shown the best performance and were recommended for implementation. Computational fluid dynamics simulations have revealed a smooth orderly low turbulence flow pattern in the second, third and fourth pass as well as the exit headers where no erosion-corrosion was seen in practice. This study has confirmed that near-wall turbulence intensity, which can be successfully predicted by using computational fluid dynamics, is a good hydrodynamic predictor of erosion-corrosion damage in complex geometries. (c) 2006 Published by Elsevier Ltd.

AUSLEM (AUStralian Land Erodibility Model): A tool for identifying wind erosion hazard in Australia

We present AUSLEM (AUStralian Land Erodibility Model), a land erodibility modelling system that utilizes a rule-set of surficial and climatic thresholds applied through a Geographic Information System (GIs) modelling framework to predict landscape susceptibility to wind erosion. AUSLEM is distinctive in that it quantitatively assesses landscape susceptibility to wind erosion at a 5 x 5 km. spatial resolution on a monthly time-step across Australia. The system was implemented for representative wet (1984), dry (1994), and average rainfall (1997) years with corresponding low, high and moderate dust storm day frequencies. Results demonstrate that AUSLEM can identify landscape erodibility, and provide an interpretation of the physical nature and distribution of erodible landscapes in Australia. Further, results offer an assessment of the dynamic tendencies of erodibility in space and time in response to the El Nino Southern Oscillation (ENSO) and seasonal synoptic scale climate variability. A comparative analysis of AUSLEM output with independent national and international wind erosion, atmospheric aerosol and dust event records indicates a high level of model competency. (c) 2006 Elsevier B.V. All rights reserved.

The effect of organic mulch amendments on the physical and chemical properties and revegetation success of a saline-sodic minespoil from central Queensland, Australia

Saline-sodic clay minespoil materials excavated during open-cut coal mining in central Queensland, Australia, pose significant challenges for revegetation, particularly where suitable topsoil capping is not available. We examined the ability of sawdust or straw mulch amendments to ameliorate the adverse properties of these minespoils and improve the success of revegetation efforts. In laboratory studies, mulch application improved infiltration, increased soil moisture retention and reduced surface crust strength. In the field, mulches incorporated to a depth of 0.15 m at application rates of at least 20 t/ha straw or 80 t/ha sawdust were needed to mitigate against capillary rise of salts during drying cycles and support satisfactory vegetation cover. Further research is needed to determine whether improvements are maintained beyond the 4-year trial period reported here.

A national coastal erosion risk assessment for Scotland

The geography of Scotland, with a highly undulating hinterland, long and indented coastline, together with a large number of islands, means that much social and economic activity is largely located at the coast. The importance of the coast is further highlighted by the large number of ecosystem services derived from the coast. The threat posed by climate change, particularly current and future sea level rise, is of considerable concern and the associated coastal erosion and coastal flooding has the potential to have a substantial effect on the socioeconomic activity of the whole country. Currently, the knowledge base of coastal erosion is poor, which serves to hinder the current and future management of the coast. This research reported here aimed to establish four key aspects of coastal erosion within Scotland: the physical susceptibility of the coast to erosion; the assets exposed to coastal erosion; the vulnerability of communities to coastal erosion; and the coastal erosion risk to those communities. Coastal erosion susceptibility was modelled here within a GIS, using data for ground elevation, rockhead elevation, wave exposure and proximity to the open coast. Combining these data produced the Underlying Physical Susceptibility Model (UPSM), in the form of a 50 m2 raster of national coverage. The Coastal Erosion Susceptibility Model (CESM) was produced with the addition of sediment supply and coastal defence data, which then moderates the outputs of the UPSM. Asset data for dwellings, key assets, transport infrastructure, historic assets, and natural assets were used along with the UPSM and CESM to assess their degree of exposure to coastal erosion. A Coastal Erosion Vulnerability Model (CEVM) was produced using Experian Mosaic Scotland (a geodemographic classification which identifies 44 different social groups within Scotland) to classify populations based upon 11 vulnerability variables. Dwellings were assigned a CESM and CEVM score in order to establish their coastal erosion risk. This research demonstrated that the issue of coastal erosion will impact on a relatively low number of properties compared to those impacted by flooding (both coastal and fluvial) as many dwellings are already protected by coastal defences. There is therefore, a considerable future liability, and great pressure for coastal defences to be maintained and upgraded in their current form. The use of the CEVM is a novel inclusion within a coastal erosion assessment for Scotland. Use of the CEVM established that coastal erosion risk is not distributed equally amongst the Scottish coastal population and highlighted that risk can be reduced by either reducing exposure or reducing vulnerability. Thus far in Scotland, reducing exposure has been the primary management approach, which has a number of implications with regards social justice. This research identified the existing data gaps that should be addressed by future research in order to further improve coastal management in Scotland. Future research should focus on assessing historical coastal change rates on a national scale, improve modelling of national scale wave exposure, enhance the information held about current coastal defences and, determine the direct and indirect economic cost associated with the loss of different asset types. It is also necessary to clarify the social justice implications of using adaptation approaches to manage coastal erosion as well as establishing a method to communicate the susceptibility, exposure, vulnerability and risk aspects whilst minimising the potential negative impacts (e.g. property blight) of releasing such information.

Physical modeling of processes of sediment transport in inlets

During the transformation of the low tide to the high tide, an exactly inverse phenomenon is occurred and the high tidal delta is formed at the mouth upstream. Increasing the tidal range does not affect the nature of this phenomenon and just change its intensity. In this situation, the inlet will be balance over time. A new relationship between equilibrium cross section and tidal prism for different tidal levels as well as sediment grading has been provided which its results are corresponded with results of numerical modeling. In the combination state, the wave height significantly affects the current and sedimentary pattern such that the wave height dimensionless index (Hw/Ht) determines the dominant parameter (the short period wave or tide) in the inlet. It is notable that in this state, the inlet will be balanced over the time. In order to calculate sedimentary phenomena, each of which are individually determined under solely wave and only tide conditions and then they are added. Estimated values are similar to numerical modeling results of the combination state considering nonlinear terms. Also, it is clear that the wave and tide performance is of meaning in the direct relationship with the water level. The water level change causes variations of the position of the breaking line and sedimentary active area. It changes the current and sedimentary pattern coastward while does not change anything seaward. Based on modeling results of sediment transport due to the wave, tide and their combination, it could be said that the erosion at the mouth due to the wave is less than that due to the wave and tide combination. In these situations, tide and wave-tide combination increase the low tidal and high tidal delta volume, respectively. Hence, tide plays an effective role in changing sedimentary phenomena at the channel and mouth downstream. Whereas, short period and combined waves have a crucial role in varying the morphology and sediment transport coast ward.

LA ECUACION UNIVERSAL DE EROSION

La erosión de los suelos agrícolas, la protección del manto vegetal en laderas inclinadas, la conservación de la fauna son temas de actualidad nacional y de problemática incluida como tema de análisis o discusión en los programas de varias carreras universitarias. El autor desea aportar elementos de juicio para enfrentar científicamente el problema de la erosión edáfica; para “ el control de un fenómeno físico o mecánico no se lleva a buen termino si el proceso de desarrollo del fenómeno no es entendido, los factores que lo determinan no pueden ser medidos y las mediciones presentadas en una ecuación”. En este artículo se hace revisión de los intentos para cuantificar el fenómeno mediante la aplicación de la Ecuación Universal de Perdida de Suelo. ABSTRACT The erosion of agricultural soils, protection of the natural cover on sloping and wild life conservation are now national issues and they are principal subjets of several courses in the universities. The author wants to contribute with some viewpoints or how to scientifically take up the problem of edaphic erosion. For him, “the control of the physical ormechanical phenomenon is not well carried out if the processes involved in the phenomenon itself are not undertood, or the determining factor are not measured and written down in a equation”. This paper reviews the attempts of quantifying the phenomenon by the application of the Universal Equitation of Equation of Soil Loss.

Silk Fibroin And Sodium Alginate Blend: Miscibility And Physical Characteristics.

Films of silk fibroin (SF) and sodium alginate (SA) blends were prepared by solution casting technique. The miscibility of SF and SA in those blends was evaluated and scanning electron microscopy (SEM) revealed that SF/SA 25/75 wt.% blends underwent microscopic phase separation, resulting in globular structures composed mainly of SF. X-ray diffraction indicated the amorphous nature of these blends, even after a treatment with ethanol that turned them insoluble in water. Thermal analyses of blends showed the peaks of degradation of pristine SF and SA shifted to intermediate temperatures. Water vapor permeability, swelling capacity and tensile strength of SF films could be enhanced by blending with SA. Cell viability remained between 90 and 100%, as indicated by in vitro cytotoxicity test. The SF/SA blend with self-assembled SF globules can be used to modulate structural and mechanical properties of the final material and may be used in designing high performance wound dressing.

[insomnia Symptoms, Daytime Naps And Physical Leisure Activities In The Elderly: Fibra Study Campinas].

The practice of physical activities contributes to reducing the risk of chronic diseases and improves sleep patterns in the elderly. This research aimed to investigate the association between insomnia symptoms and daytime nap and the participation in physical leisure activities in elderly community residents. Data from the Studies Network of the Fragility in Brazilian Elderly (Campinas site), were used. Information from 689 elderly was analyzed, regarding sociodemographic characterization, physical leisure activity, occurrence of daytime napping and its duration, symptoms of insomnia and use of sleep medication. A significant association was found between the practice of walking and the daytime nap of short duration. Studies indicate that a short nap can benefit the quality of sleep and health of the elderly. Therefore, promoting the practice of walking can be a nursing intervention that favors the sleep patterns of the elderly.

[association Between Physical And Psychosocial Impacts Of Oral Disorders And Quality Of Life Among The Elderly].

This study sought to evaluate the association between the impact of oral disorders in terms of physical/psychosocial dimensions and quality of life among the elderly. It involved a cross-sectional study conducted among the elderly (65-74 years) in 2008/2009. The social impact was assessed using the Oral Health Impact Profile (OHIP 14) and the quality of life using the SF 12 Short-Form Health Survey. Descriptive, univariate and multivariate (logistic regression) analysis was conducted with correction for the design effect, using SPSS(r)18.0 software. Of the 800 individuals approached, 736 elderly individuals participated (TR = 92%), with a mean age of 67.77 years, the majority of whom showed no impact based on the measurement of the prevalence of OHIP. The functional limitation dimension of the OHIP was associated with the physical domain of the SF12, irrespective of the other variables investigated. However, the seriousness of OHIP and its psychological discomfort and disability dimensions was associated with the mental domain of the SF12. The conclusion reached is that some impacts of oral disorders were associated with unsatisfactory quality of life in the physical and mental domains.

Influence Of Fluorescent Dye On Physical-mechanical Properties Of Luting Cements For Confocal Microscopy Analysis.

To evaluate the influence of a fluorescent dye (rhodamine B) on the physical and mechanical properties of three different luting cements: a conventional adhesive luting cement (RelyX ARC, 3M/ESPE), a self-adhesive luting cement (RelyX U-200, 3M/ESPE), and a self-etching and self-adhesive luting cement (SeT PP, SDI). The cements were mixed with 0.03 wt% rhodamine B, formed into bar-shaped specimens (n = 10), and light cured using an LED curing unit (Radii, SDI) with a radiant exposure of 32 J/cm(2) . The Knoop hardness (KHN), flexural strength (FS), and Young's modulus (YM) analyses were evaluated after storage for 24 h. Outcomes were subjected to two-way ANOVA and Tukey's test (P = 0.05) for multiple comparisons. No significant differences in FS or YM were observed among the tested groups (P ≥ 0.05); the addition of rhodamine B increased the hardness of the luting cements tested. The addition of a fluorescent agent at 0.03 wt% concentration does not negatively affect the physical-mechanical properties of the luting cement polymerization behavior.