ACE research briefing paper 001 : the role of family in new business start-ups

This report uses data from the first two years of the CAUSEE study and focuses on the role of family in new business start-ups. While CAUSEE was not designed specifically to probe deeply into family matters the study does reveal interesting information on family orientated aspects including parental role models, family involvement on the start-up team, and family as a source of funding and advice. These findings can also be related to other information gathered as part of the comprehensive phone interviews that are used to gather the research data for CAUSEE. Furthermore we are also able to compare firm founders and 'Regular' nascent firm and young firm start-ups with their 'High Potential' counterparts in terms of their degrees of family involvement. Unless otherwise stated any differences or effects we comment on are 'statistically significant' at the five per cent level - that is, they are likely to reflect true differences or effects in the entire population of Australian start-ups.

The increasing cost of the basic foods required to promote health in Queensland

Objective: To assess changes in the cost and availability of a standard basket of healthy food items (the Healthy Food Access Basket [HFAB]) in Queensland over time. Design and participants: A series of four cross-sectional surveys (in 1998, 2000, 2001 and 2004) describing the cost and availability of foods in the HFAB over time. In the latest survey, 97 Queensland food stores across the five Australian Bureau of Statistics remoteness categories were compared. Main outcome measures: Cost comparisons for HFAB items by remoteness category for the 97 stores surveyed in 2004; changes in cost and availability of foods in the 81 stores surveyed since 2000; comparisons of food prices in the 56 stores surveyed in 1998, 2000, 2001 and 2004. Results: In 2004, the Queensland mean cost of the HFAB was $395.28 a fortnight. The cost of the HFAB was 29.6%($113.89) higher in “very remote” areas than in “major cities” (P<0.001). Between 2001 and 2004, the Queensland mean cost of the HFAB increased by 14.0% ($48.45), while in very remote areas the cost increased by 18.0% ($76.93) (P<0.001). Since 2000, the annualised per cent increase in cost of the HFAB has been higher than the increase in Consumer Price Index for food in Brisbane. The cost of healthy foods has risen more than the cost of some less nutritious foods, so that the latter are now relatively more affordable. Conclusions: Consumers, particularly those in very remote locations, need to pay substantially more for basic healthy foods than they did a few years ago. Higher prices are likely to be a barrier to good health among people of low socioeconomic status and other vulnerable groups. Interventions to make basic healthy food affordable and accessible to all would help reduce the high burden of chronic disease.

The ACNC's new governance rules

Australian charities have a new regulator in the form of the Australian Charities and Not-for-profits Commission (ACNC) which began operations in December 2012; and new governance rules which applied from 1 July 2013. While there is some uncertainty over the ACNC's future, the new legislative framework currently applies to approximately 58,000 charities which seek federal tax concessions and other benefits, and includes governance standards that apply across charitable organisational forms (company, trust and association) with some exceptions. The governance standards are a minimum benchmark that many charities will already meet, if they are companies or incorporated associations.

Finding country: A strategy for the city

An essay, succeeding the Finding Country exhibition, which details three teaching studios for Queensland University of Technology Architectural students; associated with the slowly developed idea about a symmetrical context between City and Country, and into another now titled 'Burning City'. The first studio introduced fire as a practice tool of Country and to establish a case for Country to be brought into context with the City. Both the second and third studios engaged students to extend the '50 per cent emptying concept' from the first studio. The second studio moved past spiritual anxiety as a matter of manage production and to engage at an architectural scale. The third studio was accompanied by an axonometric drawing and the enquiry stemmed from the context between burnt Country and emptied City. The next frontier for this project is to progress the strategy into real architecture and actions on the City. This will require confrontation with Country as a genuine origin.

Differences in the climatic adaptation of silver birch (Betula pendula) and downy birch (B. pubescens) in Finland based on male flowering phenology.

Male flowering was studied at the canopy level in 10 silver birch (Betula pendula Roth) stands from 8 localities and in 14 downy birch (B. pubescens Ehrh.) stands from 10 localities in Finland from 1963 to 1973. Distributions of cumulative pollen catches were compared to the normal Gaussian distribution. The basis for the timing of flowering was the 50 per cent point of the anthesis-fitted normal distribution. To eliminate effects of background pollen, only the central, normally distributed part of the cumulative distribution was used. Development up to the median point of the distribution was measured and tested in calendar days, in degree days (> 5 °C) and in period units. The count of each parameter began on and included March 19. Male flowering in silver birch occurred from late April to late June depending on latitude, and flowering in downy birch took place from early May to early July. The heat sums needed for male flowering varied in downy birch stands latitudinally but there was practically no latitudinal variation in heat sums needed for silver birch flowering. The amount of male flowering in stands of both birch species were found to have a large annual variation but without any clear periodicity. The between years pollen catch variation in stands of either birch species did not show any significant latitudinal correlation in contrast to Norway spruce stands. The period unit heat sum gave the most accurate forecast of the timing of flowering for 60 per cent of the silver birch stands and for 78.6 per cent of the for downy birch stands. Calendar days, however, gave the best forecast for silver birch in 25 per cent of the cases, while degree days gave the best forecast for downy birch in 21.4 per cent of the cases. Silver birch seems to have a local inclination for a more fixed flowering date compared to downy birch, which could mean a considerable photoperiodic influence on flowering time of silver birch. Silver birch and downy birch had different geographical correlations. Frequent hybridization of birch species occurs more often in northern Finland in than in more southern latitudes. The different timing in flowering caused increasing scatter in flowering times in the north, especially in the case of downy birch. The chance of simultaneous flowering of silver birch and downy birch so increased northwards due to a more variable climate and also higher altitudinal variations. Compared with conifers, the reproduction cycles of both birch species were found to be well protected from damage by frost.

Status of the crystallography beamlines at Elettra

Elettra is one of the first 3rd-generation storage rings, recently upgraded to routinely operate in top-up mode at both 2.0 and 2.4 GeV. The facility hosts four dedicated beamlines for crystallography, two open to the users and two under construction, and expected to be ready for public use in 2015. In service since 1994, XRD1 is a general-purpose diffraction beamline. The light source for this wide (4-21 keV) energy range beamline is a permanent magnet wiggler. XRD1 covers experiments ranging from grazing incidence X-ray diffraction to macromolecular crystallography, from industrial applications of powder diffraction to X-ray phasing with long wavelengths. The bending magnet powder diffraction beamline MCX has been open to users since 2009, with a focus on microstructural investigations and studies under non-ambient conditions. A superconducting wiggler delivers a high photon flux to a new fully automated beamline dedicated to macromolecular crystallography and to a branch beamline hosting a high-pressure powder X-ray diffraction station (both currently under construction). Users of the latter experimental station will have access to a specialized sample preparation laboratory, shared with the SISSI infrared beamline. A high throughput crystallization platform equipped with an imaging system for the remote viewing, evaluation and scoring of the macromolecular crystallization experiments has also been established and is open to the user community.

The streaming of 1.3-2.3 MeV cosmic-ray protons during periods between prompt solar particle events

The anisotropy of 1.3 - 2.3 MeV protons in interplanetary space has been measured using the Caltech Electron/Isotope Spectrometer aboard IMP-7 for 317 6-hour periods from 72/273 to 74/2. Periods dominated by prompt solar particle events are not included. The convective and diffusive anisotropies are determined from the observed anisotropy using concurrent solar wind speed measurements and observed energy spectra. The diffusive flow of particles is found to be typically toward the sun, indicating a positive radial gradient in the particle density. This anisotropy is inconsistent with previously proposed sources of low-energy proton increases seen at 1 AU which involve continual solar acceleration.

The typical properties of this new component of low-energy cosmic rays have been determine d for this period which is near solar minimum. The particles have a median intensity of 0.06 protons/ cm^(2)-sec-sr-MeV and a mean spectral index of -3.15.The amplitude of the diffusive anisotropy is approximately proportional to the solar wind speed. The rate at which particles are diffusing toward the sun is larger than the rate at which the solar wind is convecting the particles away from the sun. The 20 to 1 proton to alpha ratio typical of this new component has been reported by Mewaldt, et al. (1975b).

A propagation model with κ_(rr) assumed independent of radius and energy is used to show that the anisotropy could be due to increases similar to those found by McDonald, et al. (1975) at ~3 AU. The interplanetary Fermi-acceleration model proposed by Fisk (1976) to explain the increases seen near 3 AU is not consistent with the ~12 per cent diffusive anisotropy found.

The dependence of the diffusive anisotropy on various parameters is shown. A strong dependence of the direction of the diffusive anisotropy on the concurrently measured magnetic field direction is found, indicating a κ_⊥ less than κ_∥ to be typical for this large data set.

Optimization by orthogonal array design and humoral immunity of the bivalent vaccine against Aeromonas hydrophila and Vibrio fluvialis infection in crucian carp (Carassius auratus L.)

Aeromonas hydrophila and Vibrio fluvialis are the causative agents of a serious haemorrhagic septicaemia that affects a wide range of freshwater fish in China. In order to develop a bivalent anti-A. hydrophila and anti-V. fluvialis formalin-killed vaccine to prevent this disease, an orthogonal array design (OAD) method was used to optimize the production conditions, using three factors, each having three levels. The effects of these factors and levels on the relative per cent survival for crucian carp were quantitatively evaluated by analysis of variance. The final optimized formulation was established. The data showed that inactivation temperature had a significant effect on the potency of vaccine, but formalin concentration did not. The bivalent vaccine could elicit a strong humoral response in crucian carp (Carassius auratus L.) against both A. hydrophila and V. fluvialis simultaneously, which peaked at 3 or 5 weeks respectively. Antibody titres remained high until week 12, the end of the experiment, after a single intraperitoneal injection. The verification experiment confirmed that an optimized preparation could provide protection for fish at least against A. hydrophila infection, and did perform better than the non-optimized vaccine judged by the antibody levels and protection rate, suggesting that OAD is of value in the development of improved vaccine formulations.

Optimization and characterization of the guest-host polyetherketone polymer films for application in integrated optical devices

In order to optimize the loading of 3-(1, 1-dicyanothenyl)-1-phenyl-4, 5-dihydro-1H-pryazole (DCNP) in polyetherketone (PEK-c) guest-host polymer films, ten kinds of DCNP/PEK-c thin films, in which the weight per cent of DCNP changes from 5 to 50, were prepared. Their second-order nonlinear optical coefficients chi(33)((2)) at 1064 nm were measured by Using Maker fringe method after poling under the optimal poling condition. Their optical waveguide transmission losses were measured at 632.8 nm. Optimal weight per cent of the chromophore for the DCNP/PEK-c guest-host polymer system has been determined as about 20 for use in the integrated optical devices.

Timber grading seminar - Some things you should know about how strength grading works and what is changing in the standards.

Presentations from the seminar on timber grading. "This grading seminar will give you a crash course in timber strength grading, what it is, how it works, and how it is changing. It aims to demystify timber grading, tackle some widely held misconceptions, and tell you the things you need to be aware of to improve profitability, and remain correct and safe in what you do. The timber resource in the UK is changing, technology is advancing, and standards are being modified. This seminar will bring you the latest position, informed by CEN and BSI standards committee work and research conducted by the SIRT network."

The Relevance Framework for Category-Based Induction: Evidence From Garden-Path Arguments

Relevance theory (Sperber & Wilson. 1995) suggests that people expend cognitive effort when processing information in proportion to the cognitive effects to be gained from doing so. This theory has been used to explain how people apply their knowledge appropriately when evaluating category-based inductive arguments (Medin, Coley, Storms, & Hayes, 2003). In such arguments, people are told that a property is true of premise categories and are asked to evaluate the likelihood that it is also true of conclusion categories. According to the relevance framework, reasoners generate hypotheses about the relevant relation between the categories in the argument. We reasoned that premises inconsistent with early hypotheses about the relevant relation would have greater effects than consistent premises. We designed three premise garden-path arguments where the same 3rd premise was either consistent or inconsistent with likely hypotheses about the relevant relation. In Experiments 1 and 2, we showed that effort expended processing consistent premises (measured via reading times) was significantly less than effort expended on inconsistent premises. In Experiment 2 and 3, we demonstrated a direct relation between cognitive effect and cognitive effort. For garden-path arguments, belief change given inconsistent 3rd premises was significantly correlated with Premise 3 (Experiment 3) and conclusion (Experiments 2 and 3) reading times. For consistent arguments, the correlation between belief change and reading times did not approach significance. These results support the relevance framework for induction but are difficult to accommodate under other approaches.

Silchester Roman Town Insula IX: the development of an urban property c. AD 40-50 - c. AD 250

The development of an urban property in the Roman town of Calleva Atrebatum (Silchester, Hampshire, England) is traced from the late 1st to the mid-3rd century AD. Three successive periods of building with their associated finds of artefacts and biological remains are described and interpreted with provisional reconstructions of the buildings. Links are provided to a copy of the Integrated Archaeological Database (IADB), archived by the Archaeology Data Service, which holds the primary excavation and finds records.

Observation of the antimatter helium-4 nucleus

High-energy nuclear collisions create an energy density similar to that of the Universe microseconds after the Big Bang(1); in both cases, matter and antimatter are formed with comparable abundance. However, the relatively short-lived expansion in nuclear collisions allows antimatter to decouple quickly from matter, and avoid annihilation. Thus, a high-energy accelerator of heavy nuclei provides an efficient means of producing and studying antimatter. The antimatter helium-4 nucleus ((4)(He) over bar), also known as the anti-alpha ((alpha) over bar), consists of two antiprotons and two antineutrons (baryon number B = -4). It has not been observed previously, although the alpha-particle was identified a century ago by Rutherford and is present in cosmic radiation at the ten per cent level(2). Antimatter nuclei with B -1 have been observed only as rare products of interactions at particle accelerators, where the rate of antinucleus production in high-energy collisions decreases by a factor of about 1,000 with each additional antinucleon(3-5). Here we report the observation of (4)<(He) over bar, the heaviest observed antinucleus to date. In total, 18 (4)(He) over bar counts were detected at the STAR experiment at the Relativistic Heavy Ion Collider (RHIC; ref. 6) in 10(9) recorded gold-on-gold (Au+Au) collisions at centre-of-mass energies of 200 GeV and 62 GeV per nucleon-nucleon pair. The yield is consistent with expectations from thermodynamic(7) and coalescent nucleosynthesis(8) models, providing an indication of the production rate of even heavier antimatter nuclei and a benchmark for possible future observations of (4)(He) over bar in cosmic radiation.

The invertebrate colonization during decomposition of Eichhornia azurea kunth in a lateral lake in the mouth zone of Paranapanema River into Jurumirim Reservoir (São Paulo, Brazil)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Use of fibrin glue derived from snake venom in the repair of deep corneal ulcers - Experimental study in dogs (Canis familiaris, Linnaeus, 1758)

Fibrin glue has been researched as an alternative method for tissue synthesis and is known for its capability to promote hemostasis at the application site, good approximation of wound edges and fast healing. The current study consisted in the application of fibrin glue derived from snake venom as treatment for experimental corneal ulcers. Twenty-one dogs had their corneas experimentally prepared through lamellar keratectomy (of standardized diameter and depth). Animals were divided into seven groups of three animals each. Six experimental groups were periodically evaluated and collection was carried out on the 1st, 3rd, 7th, 15 th, 30th and 60th post-operative days, whereas one control group was evaluated throughout the experiment. Analyses consisted in the clinical evolution and in the histopathological study of all operated on eyes. Results indicated that fibrin glue was efficient in repairing keratectomy wounds in dogs and contributed to an earlier healing phenomenon, avoiding edema formation and keeping corneal clearness. The use of fibrin glue derived from snake venom showed to be easy to apply, feasible with animal models and of low cost, avoiding the lesion progress and allowing fast and appropriate corneal healing.