The relevance of seed size in modulating leaf physiology and early plant performance in two tree species

he size of seeds and the microsite of seed dispersal may affect the early establishment of seedlings through different physiological processes. Here, we examined the effects of seed size and light availability on seedling growth and survival, and whether such effects were mediated by water use efficiency. Acorns of Quercus petraea and the more drought-tolerant Quercus pyrenaica were sowed within and around a tree canopy gap in a sub-Mediterranean forest stand. We monitored seedling emergence and measured predawn leaf water potential (Ψpd), leaf nitrogen per unit area (Na), leaf mass per area, leaf carbon isotope composition (δ13C) and plant growth at the end of the first summer. Survival was measured on the next year. Path analysis revealed a consistent pattern in both species of higher δ13C as Ψpd decreased and higher δ13C as seedlings emerged later in the season, indicating an increase in 13C as the growing season is shorter and drier. There was a direct positive effect of seed size on δ13C in Q. petraea that was absent in Q. pyrenaica. Leaf δ13C had no effect on growth but the probability of surviving until the second year was higher for those seedlings of Q. pyrenaica that had lower δ13C on the first year. In conclusion, leaf δ13C is affected by seed size, seedling emergence time and the availability of light and water, however, leaf δ13C is irrelevant for first year growth, which is directly dependent on the amount of seed reserves.

Industries and Citizens’ Groups Networks in EU Food Policy: The Emergence of ‘Unholy Alliances’ in Multilevel Governance? Brugges Political Research Paper No. 30, September 2013

Food policy is one the most regulated policy fields at the EU level. ‘Unholy alliances’ are collaborative patterns that temporarily bring together antagonistic stakeholders behind a common cause. This paper deals with such ‘transversal’ co-operations between citizens’ groups (NGOs, consumers associations…) and economic stakeholders (food industries, retailers…), focusing on their ambitions and consequences. This paper builds on two case studies that enable a more nuanced view on the perspectives for the development of transversal networks at the EU level. The main findings are that (i) the rationale behind the adoption of collaborative partnerships actually comes from a case-by-case cost/benefit analysis leading to hopes of improved access to institutions; (ii) membership of a collaborative network leads to a learning process closely linked to the network’s performance; and (iii) coalitions can have a better reception — rather than an automatic better access — depending on several factors independent of the stakeholders themselves.

Oviposition and reproductive performance of a generalist parasitoid (Trichogramma pretiosum) exposed to host species that differ in their physical characteristics

The response of generalist egg parasitoids to alternative natural hosts that are present simultaneously is not well known. We investigated the behavior of Trichogramma pretiosum Riley (Hymenoptera: Trichogrammatidae) in relation to two field hosts Helicoverpa armigera Hubner and Spodoptera litura Fabricius, in choice and no choice tests. We quantified the effects of natal host species and post-emergence adult age on the oviposition preference of the parasitoids. H. armigera eggs were consistently preferred over S. litura eggs, regardless of the natal host and adult age. When only S. litura eggs were available as hosts, they were parasitized at statistically similar rates to H. armigera eggs (average of 17 +/- 2.7 vs. 13 +/- 3.0, H. armigera to S. litura). The adult lifespan and lifetime fecundity of T. pretiosum were variable but were affected by natal host species and/or host species to which they were exposed. Mean lifespan and fecundity of parasitoids that had developed in H. armigera eggs and were exposed to H. armigera eggs for oviposition were 13.9 +/- 1.8 days and 98.7 +/- 11.0 adult offspring. By contrast, those that developed in S. litura eggs and were exposed to S. litura eggs for oviposition lived for 7 +/- 0.9 days and produced 53.8 +/- 8.0 adult offspring. The ovigeny index (OI) was significantly lower in the parasitoids exposed to H. armigera eggs than in those exposed to S. litura eggs, regardless of the natal host, indicating that H. armigera eggs sustain the adult parasitoids better than S. litura eggs. These results are used to predict parasitoid behavior in the field when both hosts are available. (c) 2006 Elsevier Inc. All rights reserved.

Why organizational and community diversity matter:the emergence of incivility and organizational outcomes

Integrating sociological and psychological perspectives, this research considers the value of organizational ethnic diversity as a function of community diversity. Employee and patient surveys, census data, and performance indexes relevant to 142 hospitals in the United Kingdom suggest that intraorganizational ethnic diversity is associated with reduced civility toward patients. However, the degree to which organizational demography was representative of community demography was positively related to civility experienced by patients and ultimately enhanced organizational performance. These findings underscore the understudied effects of community context and imply that intergroup biases manifested in incivility toward out-group members hinder organizational performance.

Introduction : the role of quality, production and technological innovation in improving competitive performance

Quality, production and technological innovation management rank among the most important matters of concern to modern manufacturing organisations. They can provide companies with the decisive means of gaining a competitive advantage, especially within industries where there is an increasing similarity in product design and manufacturing processes. The papers in this special issue of International Journal of Technology Management have all been selected as examples of how aspects of quality, production and technological innovation can help to improve competitive performance. Most are based on presentations made at the UK Operations Management Association's Sixth International Conference held at Aston University at which the theme was 'Getting Ahead Through Technology and People'. At the conference itself over 80 papers were presented by authors from 15 countries around the world. Among the many topics addressed within the conference theme, technological innovation, quality and production management emerged as attracting the greatest concern and interest of delegates, particularly those from industry. For any new initiative to be implemented successfully, it should be led from the top of the organization. Achieving the desired level of commitment from top management can, however, be a difficulty. In the first paper of this issue, Mackness investigates this question by explaining how systems thinking can help. In the systems approach, properties such as 'emergence', 'hierarchy', 'commnication' and 'control' are used to assist top managers in preparing for change. Mackness's paper is then complemented by Iijima and Hasegawa's contribution in which they investigate the development of Quality Information Management (QIM) in Japan. They present the idea of a Design Review and demonstrate how it can be used to trace and reduce quality-related losses. The next paper on the subject of quality is by Whittle and colleagues. It relates to total quality and the process of culture change within organisations. Using the findings of investigations carried out in a number of case study companies, they describe four generic models which have been identified as characterising methods of implementing total quality within existing organisation cultures. Boaden and Dale's paper also relates to the management of quality, but looks specifically at the construction industry where it has been found there is still some confusion over the role of Quality Assurance (QA) and Total Quality Management (TQM). They describe the results of a questionnaire survey of forty companies in the industry and compare them to similar work carried out in other industries. Szakonyi's contribution then completes this group of papers which all relate specifically to the question of quality. His concern is with the two ways in which R&D or engineering managers can work on improving quality. The first is by improving it in the laboratory, while the second is by working with other functions to improve quality in the company. The next group of papers in this issue all address aspects of production management. Umeda's paper proposes a new manufacturing-oriented simulation package for production management which provides important information for both design and operation of manufacturing systems. A simulation for production strategy in a Computer Integrated Manufacturing (CIM) environment is also discussed. This paper is then followed by a contribution by Tanaka and colleagues in which they consider loading schedules for manufacturing orders in a Material Requirements Planning (MRP) environment. They compare mathematical programming with a knowledge-based approach, and comment on their relative effectiveness for different practical situations. Engstrom and Medbo's paper then looks at a particular aspect of production system design, namely the question of devising group working arrangements for assembly with new product structures. Using the case of a Swedish vehicle assembly plant where long cycle assembly work has been adopted, they advocate the use of a generally applicable product structure which can be adapted to suit individual local conditions. In the last paper of this particular group, Tay considers how automation has affected the production efficiency in Singapore. Using data from ten major industries he identifies several factors which are positively correlated with efficiency, with capital intensity being of greatest interest to policy makers. The two following papers examine the case of electronic data interchange (EDI) as a means of improving the efficiency and quality of trading relationships. Banerjee and Banerjee consider a particular approach to material provisioning for production systems using orderless inventory replenishment. Using the example of a single supplier and multiple buyers they develop an analytical model which is applicable for the exchange of information between trading partners using EDI. They conclude that EDI-based inventory control can be attractive from economic as well as other standpoints and that the approach is consistent with and can be instrumental in moving towards just-in-time (JIT) inventory management. Slacker's complementary viewpoint on EDI is from the perspective of the quality relation-ship between the customer and supplier. Based on the experience of Lucas, a supplier within the automotive industry, he concludes that both banks and trading companies must take responsibility for the development of payment mechanisms which satisfy the requirements of quality trading. The three final papers of this issue relate to technological innovation and are all country based. Berman and Khalil report on a survey of US technological effectiveness in the global economy. The importance of education is supported in their conclusions, although it remains unclear to what extent the US government can play a wider role in promoting technological innovation and new industries. The role of technology in national development is taken up by Martinsons and Valdemars who examine the case of the former Soviet Union. The failure to successfully infuse technology into Soviet enterprises is seen as a factor in that country's demise, and it is anticipated that the newly liberalised economies will be able to encourage greater technological creativity. This point is then taken up in Perminov's concluding paper which looks in detail at Russia. Here a similar analysis is made of the concluding paper which looks in detail at Russia. Here a similar analysis is made of the Soviet Union's technological decline, but a development strategy is also presented within the context of the change from a centralised to a free market economy. The papers included in this special issue of the International Journal of Technology Management each represent a unique and particular contribution to their own specific area of concern. Together, however, they also argue or demonstrate the general improvements in competitive performance that can be achieved through the application of modern principles and practice to the management of quality, production and technological innovation.

The influence of socio-cultural environments on the performance of nascent entrepreneurs:community culture, motivation, self-efficacy and start-up success

The importance of informal institutions and in particular culture for entrepreneurship is a subject of ongoing interest. Past research has mostly concentrated on cross-national comparisons, cultural values and the direct effects of culture on entrepreneurial behaviour, but in the main found inconsistent results. We add a fresh perspective to this research stream by turning attention to community-level culture and cultural norms. We hypothesize indirect effects of cultural norms on venture emergence: Community-level cultural norms (performance-based culture and socially supportive institutional norms) impact important supply-side variables (entrepreneurial self-efficacy and entrepreneurial motivation) which in turn influence nascent entrepreneurs' success in creating operational ventures (venture emergence). We test our predictions on a unique longitudinal dataset, tracking nascent entrepreneurs' venture creation efforts over a five-year time span, and find evidence supporting them. Our research contributes to a more fine-grained understanding of how culture, in particular perceptions of community cultural norms, influences venture emergence. Based on these findings, we discuss how venture creation efforts can be supported. Our research highlights the embeddedness of entrepreneurial behaviour and its immediate antecedent beliefs in the local, community context. © 2012 Copyright Taylor and Francis Group, LLC.

Integrating risk management with performance management

This article argues that, post Enron, governance reforms around the world have served to raise the profile of risk management, and emphasise the need for a corporate wide approach to internal control that is overseen by the Board of Directors. In the US, this is most clearly demonstrated by the emergence of Enterprise Risk Management (ERM), defined as 'a process, effected by an entity's board of directors, management and other personnel, applied in strategy setting across the enterprise, designed to identify potential events that may affect the entity, and manage risk to be within its risk appetite, to provide reasonable assurance regarding the achievement of entity objectives.' (COSO, 2004, p.2). In practical terms, however, the introduction of an enterprise wide holistic risk management system poses a big challenge to all but the smallest of organisations. The financial crisis has clearly shown that enterprise wide risk management remains a dream rather than a reality for even the world's largest and once highly respected companies.

The influence of socio-cultural environments on the performance of nascent entrepreneurs:an instrumental variable approach

The importance of informal institutions and in particular culture for entrepreneurship is a subject of ongoing interest. Past research has mostly concentrated on cross-national comparisons, cultural values, and the direct effects of culture on entrepreneurial behavior, but in the main found inconsistent results. The present research adds a fresh perspective to this research stream by turning attention to community-level culture and cultural norms. We hypothesize indirect effects of cultural norms on venture emergence. Specifically that community-level cultural norms (performance-based culture and socially-supportive institutional norms) impact important supply-side variables (entrepreneurial self-efficacy and entrepreneurial motivation) which in turn influence nascent entrepreneurs’ success in creating operational ventures (venture emergence). We test our predictions on a unique longitudinal data set (PSED II) tracking nascent entrepreneurs venture creation efforts over a 5 year time span and find evidence supporting them. Our research contributes to a more fine-grained understanding of how culture, in particular perceptions of community cultural norms, influences venture emergence. This research highlights the embeddedness of entrepreneurial behavior and its immediate antecedent beliefs in the local, community context.

Linking comprehensive performance assessment to the balanced scorecard:evidence from Hertfordshire County Council

Over the course of the last twenty years there has been a growing academic interest in performance management, particularly in respect of the evolution of new techniques and their resulting impact. One important theoretical development has been the emergence of multidimensional performance measurement models that are potentially applicable within the public sector. Empirically, academic researchers are increasingly supporting the use of such models as a way of improving public sector management and the effectiveness of service provision (Mayston, 1985; Pollitt, 1986; Bates and Brignall, 1993; and Massey, 1999). This paper seeks to add to the literature by using both theoretical and empirical evidence to argue that CPA, the external inspection tool used by the Audit Commission to evaluate local authority performance management, is a version of the Balanced Scorecard which, when adapted for internal use, may have beneficial effects. After demonstrating the parallels between the CPA framework and Kaplan and Norton's public sector Balanced Scorecard (BSC), we use a case study of the BSC based performance management system in Hertfordshire County Council to demonstrate the empirical linkages between a local scorecard and CPA. We conclude that CPA is based upon the BSC and has the potential to serve as a springboard for the evolution of local authority performance management systems.

Using the max-sum algorithm for supply chain emergence in dynamic multiunit environments

Supply chain formation (SCF) is the process of determining the set of participants and exchange relationships within a network with the goal of setting up a supply chain that meets some predefined social objective. Many proposed solutions for the SCF problem rely on centralized computation, which presents a single point of failure and can also lead to problems with scalability. Decentralized techniques that aid supply chain emergence offer a more robust and scalable approach by allowing participants to deliberate between themselves about the structure of the optimal supply chain. Current decentralized supply chain emergence mechanisms are only able to deal with simplistic scenarios in which goods are produced and traded in single units only and without taking into account production capacities or input-output ratios other than 1:1. In this paper, we demonstrate the performance of a graphical inference technique, max-sum loopy belief propagation (LBP), in a complex multiunit unit supply chain emergence scenario which models additional constraints such as production capacities and input-to-output ratios. We also provide results demonstrating the performance of LBP in dynamic environments, where the properties and composition of participants are altered as the algorithm is running. Our results suggest that max-sum LBP produces consistently strong solutions on a variety of network structures in a multiunit problem scenario, and that performance tends not to be affected by on-the-fly changes to the properties or composition of participants.

‘The Emergence of the Operatic’

The chapter discusses the notion of the ‘operatic’ with particular reference to movement. Through observation of singers in rehearsal and through interviews with singers over two years, the research posits that ‘operatic’ movement may be identified and explored as a discrete quality of movement in performance and recognised as an, albeit underappreciated, aspect of the artistry of the opera singer. The paper explores the effects of the demands of singing on the dramatic expressivity of the body and the strategies employed by singers to navigate, the sometimes conflicting demands of the composer and the director. ‘Operatic’ movement is regarded as that which is not generated through character or narrative (positioned as a normative approach to acting) but through the negotiation of the physical constrictions and artificiality of breath associated with operatic singing, combined with sensitivity towards opera’s non-normative performance conventions. This position is aided by an interrogation of opera through the lens of gender theory. The chapter makes two propositions, that the ‘operatic’, which does not form part of the formal pedagogy of singers, is an emergent property, especially evident at the intersection of the various creative disciplines that contribute to opera, such as when the orchestra is introduced to the rehearsal process, and that ‘operaticness’ is acquired and passed on through a process of kinaesthetic empathy.

Circuito regional de performance BodeArte: encontros, coletividade e porítica na performance do Rio Grande do Norte

This dissertation aims to look into the structure of the event Circuito Regional de Performance BodeArte1 to think how it collaborate with its proposal providing theoretical points to relevant questions to the comprehension of Brazilian performance art in contemporaneity, since its conceptual format until its occurrence and practical limitations. From this proposition the dissertation is organized into three chapters guided for the following aspects: the resumption of the events encompassed on the occurrence of Circuit BodeArte as well as a tabulation of the data reunited in its history, the presentation of its conceptual choices, and the metaphors conducted by the use of the term performance and how they can lead us to the idea of a performance-as-BodeArte. The methodological structures moved for this organization are qualitative, and have been formed from printed materials, texts, festival programs, blog, videos, photos, interviews, lectures and forums, plus our own memory as a producer and performer of the event, looking through these set points of the epistemological organization contained on the proposal of the Circuito, expanding and discussing them. This way this research moves between the propositions of this event in its three editions, promoting discussions that dialogue with concepts such as the emergence of Steve Johnson (2004), the metaphors of thought proposed by Christine Greiner (2005), the idea of performance hacker of Maria Beatriz de Medeiros (AQUINO, et al., 2012), as well as other propositions presented by Jan Swidzinski (2005) and Eleonora Fabião (2012)

Circuito regional de performance BodeArte: encontros, coletividade e porítica na performance do Rio Grande do Norte

This dissertation aims to look into the structure of the event Circuito Regional de Performance BodeArte1 to think how it collaborate with its proposal providing theoretical points to relevant questions to the comprehension of Brazilian performance art in contemporaneity, since its conceptual format until its occurrence and practical limitations. From this proposition the dissertation is organized into three chapters guided for the following aspects: the resumption of the events encompassed on the occurrence of Circuit BodeArte as well as a tabulation of the data reunited in its history, the presentation of its conceptual choices, and the metaphors conducted by the use of the term performance and how they can lead us to the idea of a performance-as-BodeArte. The methodological structures moved for this organization are qualitative, and have been formed from printed materials, texts, festival programs, blog, videos, photos, interviews, lectures and forums, plus our own memory as a producer and performer of the event, looking through these set points of the epistemological organization contained on the proposal of the Circuito, expanding and discussing them. This way this research moves between the propositions of this event in its three editions, promoting discussions that dialogue with concepts such as the emergence of Steve Johnson (2004), the metaphors of thought proposed by Christine Greiner (2005), the idea of performance hacker of Maria Beatriz de Medeiros (AQUINO, et al., 2012), as well as other propositions presented by Jan Swidzinski (2005) and Eleonora Fabião (2012)

Genetic Aspects Of Athletic Performance: The African Runners Phenomenon.

The current dominance of African runners in long-distance running is an intriguing phenomenon that highlights the close relationship between genetics and physical performance. Many factors in the interesting interaction between genotype and phenotype (eg, high cardiorespiratory fitness, higher hemoglobin concentration, good metabolic efficiency, muscle fiber composition, enzyme profile, diet, altitude training, and psychological aspects) have been proposed in the attempt to explain the extraordinary success of these runners. Increasing evidence shows that genetics may be a determining factor in physical and athletic performance. But, could this also be true for African long-distance runners? Based on this question, this brief review proposed the role of genetic factors (mitochondrial deoxyribonucleic acid, the Y chromosome, and the angiotensin-converting enzyme and the alpha-actinin-3 genes) in the amazing athletic performance observed in African runners, especially the Kenyans and Ethiopians, despite their environmental constraints.

Propylthiouracil Quantification In Human Plasma By High-performance Liquid Chromatography Coupled With Electrospray Tandem Mass Spectrometry: Application In A Bioequivalence Study.

A rapid, sensitive and specific method for quantifying propylthiouracil in human plasma using methylthiouracil as the internal standard (IS) is described. The analyte and the IS were extracted from plasma by liquid-liquid extraction using an organic solvent (ethyl acetate). The extracts were analyzed by high performance liquid chromatography coupled with electrospray tandem mass spectrometry (HPLC-MS/MS) in negative mode (ES-). Chromatography was performed using a Phenomenex Gemini C18 5μm analytical column (4.6mm×150mm i.d.) and a mobile phase consisting of methanol/water/acetonitrile (40/40/20, v/v/v)+0.1% of formic acid. For propylthiouracil and I.S., the optimized parameters of the declustering potential, collision energy and collision exit potential were -60 (V), -26 (eV) and -5 (V), respectively. The method had a chromatographic run time of 2.5min and a linear calibration curve over the range 20-5000ng/mL. The limit of quantification was 20ng/mL. The stability tests indicated no significant degradation. This HPLC-MS/MS procedure was used to assess the bioequivalence of two propylthiouracil 100mg tablet formulations in healthy volunteers of both sexes in fasted and fed state. The geometric mean and 90% confidence interval CI of Test/Reference percent ratios were, without and with food, respectively: 109.28% (103.63-115.25%) and 115.60% (109.03-122.58%) for Cmax, 103.31% (100.74-105.96%) and 103.40% (101.03-105.84) for AUClast. This method offers advantages over those previously reported, in terms of both a simple liquid-liquid extraction without clean-up procedures, as well as a faster run time (2.5min). The LOQ of 20ng/mL is well suited for pharmacokinetic studies. The assay performance results indicate that the method is precise and accurate enough for the routine determination of the propylthiouracil in human plasma. The test formulation with and without food was bioequivalent to reference formulation. Food administration increased the Tmax and decreased the bioavailability (Cmax and AUC).