Thinking Critically About Rural Gender Relations: Toward a Rural Masculinity/Male Peer Support Model of Separation/Divorce Sexual Assault

After decades of neglect, a growing number of scholars have turned their attention to issues of crime and criminal justice in the rural context. Despite this improvement, rural crime research is underdeveloped theoretically, and is little informed by critical criminological perspectives. In this article, we introduce the broad tenets of a multi-level theory that links social and economic change to the reinforcement of rural patriarchy and male peer support, and in turn, how they are linked to separation/divorce sexual assault. We begin by addressing a series of misconceptions about what is rural, rural homogeneity and commonly held presumptions about the relationship of rurality, collective efficacy (and related concepts) and crime. We conclude by recommending more focused research, both qualitative and quantitative, to uncover specific link between the rural transformation and violence against women.

The increased popularity of mopeds and motor scooters : exploring usage patterns and safety outcomes

Increased use of powered two-wheelers (PTWs) often underlies increases in the number of reported crashes, promoting research into PTW safety. PTW riders are overrepresented in crash and injury statistics relative to exposure and, as such, are considered vulnerable road users. PTW use has increased substantially over the last decade in many developed countries. One such country is Australia, where moped and scooter use has increased at a faster rate than motorcycle use in recent years. Increased moped use is particularly evident in the State of Queensland which is one of four Australian jurisdictions where moped riding is permitted for car licence holders and a motorcycle licence is not required. A moped is commonly a small motor scooter and is limited to a maximum design speed of 50 km/h and a maximum engine cylinder capacity of 50 cubic centimetres. Scooters exceeding either of these specifications are classed as motorcycles in all Australian jurisdictions. While an extensive body of knowledge exists on motorcycle safety, some of which is relevant to moped and scooter safety, the latter PTW types have received comparatively little focused research attention. Much of the research on moped safety to date has been conducted in Europe where they have been popular since the mid 20th century, while some studies have also been conducted in the United States. This research is of limited relevance to Australia due to socio-cultural, economic, regulatory and environmental differences. Moreover, while some studies have compared motorcycles to mopeds in terms of safety, no research to date has specifically examined the differences and similarities between mopeds and larger scooters, or between larger scooters and motorcycles. To address the need for a better understanding of moped and scooter use and safety, the current program of research involved three complementary studies designed to achieve the following aims: (1) develop better knowledge and understanding of moped and scooter usage trends and patterns; and (2) determine the factors leading to differences in moped, scooter and motorcycle safety. Study 1 involved six-monthly observations of PTW types in inner city parking areas of Queensland’s capital city, Brisbane, to monitor and quantify the types of PTW in use over a two year period. Study 2 involved an analysis of Queensland PTW crash and registration data, primarily comparing the police-reported crash involvement of mopeds, scooters and motorcycles over a five year period (N = 7,347). Study 3 employed both qualitative and quantitative methods to examine moped and scooter usage in two components: (a) four focus group discussions with Brisbane-based Queensland moped and scooter riders (N = 23); and (b) a state-wide survey of Queensland moped and scooter riders (N = 192). Study 1 found that of the PTW types parked in inner city Brisbane over the study period (N = 2,642), more than one third (36.1%) were mopeds or larger scooters. The number of PTWs observed increased at each six-monthly phase, but there were no significant changes in the proportions of PTW types observed across study phases. There were no significant differences in the proportions or numbers of PTW type observed by season. Study 2 revealed some important differences between mopeds, scooters and motorcycles in terms of safety and usage through analysis of crash and registration data. All Queensland PTW registrations doubled between 2001 and 2009, but there was an almost fifteen-fold increase in moped registrations. Mopeds subsequently increased as a proportion of Queensland registered PTWs from 1.2 percent to 8.8 percent over this nine year period. Moped and scooter crashes increased at a faster rate than motorcycle crashes over the five year study period from July 2003 to June 2008, reflecting their relatively greater increased usage. Crash rates per 10,000 registrations for the study period were only slightly higher for mopeds (133.4) than for motorcycles and scooters combined (124.8), but estimated crash rates per million vehicle kilometres travelled were higher for mopeds (6.3) than motorcycles and scooters (1.7). While the number of crashes increased for each PTW type over the study period, the rate of crashes per 10,000 registrations declined by 40 percent for mopeds compared with 22 percent for motorcycles and scooters combined. Moped and scooter crashes were generally less severe than motorcycle crashes and this was related to the particular crash characteristics of the PTW types rather than to the PTW types themselves. Compared to motorcycle and moped crashes, scooter crashes were less likely to be single vehicle crashes, to involve a speeding or impaired rider, to involve poor road conditions, or to be attributed to rider error. Scooter and moped crashes were more likely than motorcycle crashes to occur on weekdays, in lower speed zones and at intersections. Scooter riders were older on average (39) than moped (32) and motorcycle (35) riders, while moped riders were more likely to be female (36%) than scooter (22%) or motorcycle riders (7%). The licence characteristics of scooter and motorcycle riders were similar, with moped riders more likely to be licensed outside of Queensland and less likely to hold a full or open licence. The PTW type could not be identified in 15 percent of all cases, indicating a need for more complete recording of vehicle details in the registration data. The focus groups in Study 3a and the survey in Study 3b suggested that moped and scooter riders are a heterogeneous population in terms of demographic characteristics, riding experience, and knowledge and attitudes regarding safety and risk. The self-reported crash involvement of Study 3b respondents suggests that most moped and scooter crashes result in no injury or minor injury and are not reported to police. Study 3 provided some explanation for differences observed in Study 2 between mopeds and scooters in terms of crash involvement. On the whole, scooter riders were older, more experienced, more likely to have undertaken rider training and to value rider training programs. Scooter riders were also more likely to use protective clothing and to seek out safety-related information. This research has some important practical implications regarding moped and scooter use and safety. While mopeds and scooters are generally similar in terms of usage, and their usage has increased, scooter riders appear to be safer than moped riders due to some combination of superior skills and safer riding behaviour. It is reasonable to expect that mopeds and scooters will remain popular in Queensland in future and that their usage may further increase, along with that of motorcycles. Future policy and planning should consider potential options for encouraging moped riders to acquire better riding skills and greater safety awareness. While rider training and licensing appears an obvious potential countermeasure, the effectiveness of rider training has not been established and other options should also be strongly considered. Such options might include rider education and safety promotion, while interventions could also target other road users and urban infrastructure. Future research is warranted in regard to moped and scooter safety, particularly where the use of those PTWs has increased substantially from low levels. Research could address areas such as rider training and licensing (including program evaluations), the need for more detailed and reliable data (particularly crash and exposure data), protective clothing use, risks associated with lane splitting and filtering, and tourist use of mopeds. Some of this research would likely be relevant to motorcycle use and safety, as well as that of mopeds and scooters.

Teachers’ perceptions of school connectedness and risk-taking in adolescence

School connectedness has been shown to be an important protective factor in adolescent development, which is associated with reduced risk-taking behaviour. Interventions to increase students’ connectedness to school commonly incorporate aspects of teacher training. To date, however, research on connectedness has largely been based on student survey data, with no reported research addressing teachers’ perceptions of students’ connectedness and its association with student behavior. This research attempted to address this gap in the literature through in depth interviews with 14 school teachers and staff from two Australian high schools. Findings showed that teachers perceived students’ connectedness to be important in regards to reducing problem behavior, and discussed aspects of connectedness, including fairness and discipline, feeling valued, belonging and having teacher support, and being successfully engaged in school, as being particularly important. This research enables the development of school-based intervention programs that are based on both student and teacher-focused research.

Comparison of moped, scooter and motorcycle crashes : implications for rider training and education

Scooter and moped sales have increased at a faster rate than motorcycle sales over the last decade in countries such as Australia, Canada and the United States. This may be particularly evident in jurisdictions where moped riding is permitted for car license holders and a motorcycle license is not required, such as in Queensland, Australia. Having historically comprised only a small proportion of powered two-wheelers (PTWs) outside of Europe and Asia, the safety of scooters and mopeds has received relatively little focused research attention. However, the recent trends in sales and crash involvement have stimulated greater interest in these PTW types. The current paper examines differences and similarities between scooters (over 50cc), mopeds (up to 50cc) and motorcycles in crash involvement and crash characteristics through analyses of crash and registration data from Queensland, Australia. The main findings include that moped and scooter riders are similar in terms of usage patterns, but the evidence suggests superior skills, greater experience and safer behaviour among scooter riders than moped riders. The requirement in Queensland for scooter riders but not moped riders to hold a motorcycle license, usually obtained through competency-based training and assessment, may help to explain some of this difference. Findings also suggest that scooter riders are safer than motorcycle riders in some respects, despite both being subject to the same licensing requirements which encourage participation in rider training. Safer attitudes and motivations rather than superior skills and knowledge may therefore underlie the differences between scooter and motorcycle riders. In summary, riders of larger scooters exhibit a combination of skills and behavior suggestive of safer riding than both their moped and motorcycle riding counterparts. It is reasonable to expect that mopeds and scooters will remain popular and that their usage may increase further, along with that of motorcycles. This research therefore has important practical implications regarding pathways to improved PTW safety. Future policy and planning should consider options for encouraging moped riders to acquire better riding skills and greater safety awareness, as apparent among scooter riders, including rider training, education and licensing. As is noted in recent literature and reflected in some contemporary rider training programs, motorcycle safety may be improved by addressing rider attitudes more comprehensively in addition to developing skills and knowledge.

What factors influence nurses’ assessment practices? Development of the Barriers to Nurses’ use of Physical Assessment Scale

Aim To develop and psychometrically test the Barriers to Nurses’ use of Physical Assessment Scale. Background There is growing evidence of failure to recognise hospitalised patients at risk of clinical deterioration, in part due to inadequate physical assessment by nurses. Yet, little is known about the barriers to nurses’ use of physical assessment in the acute hospital setting and no validated scales have been published. Design Instrument development study. Method Scale development was based on a comprehensive literature review, focus groups, expert review and psychometric evaluation. The scale was administered to 434 acute care registered nurses working at a large Australian teaching hospital between June and July 2013. Psychometric analysis included factor analysis, model fit statistics and reliability testing. Results The final scale was reduced to 38 items representing seven factors, together accounting for 57.7% of the variance: (1) reliance on others and technology, (2) lack of time and interruptions, (3) ward culture, (4) lack of confidence, (5) lack of nursing role models, (6) lack of influence on patient care, and; (7) specialty area. Internal reliability ranged from .70 to .86. Conclusion Findings provide initial evidence for the validity and reliability of the Barriers to Nurses’ use of Physical Assessment Scale and point to the importance of understanding the organisational determinants of nurses’ assessment practices. The new scale has potential clinical and research applications to support nursing assessment in acute care settings.

Empowerment in nursing : paternalism or maternalism?

The aim of this article is to explore whether patient empowerment flourishes in the wake of current health reforms or if there is a power struggle between nursing and medicine as to what is in the patients' best interest. Shifting the balance of power from healthcare professionals to patients has become a key element of healthcare policy in England. The RCN's definition of nursing places patient empowerment as a central remit of nurses. However, achieving genuine patient empowerment is not easy and requires individuals and organizations to alter their beliefs, values and behaviours. To empower patients nurses must be in a position to share power and this may require a realignment of the traditional power base within health care. Although empowerment is often viewed on a one-to-one level between professionals and patients, for true patient empowerment to occur, issues of power and control must also be addressed at a national and political level.

Free for all : a case study examining implementation factors of one-to-one device programs

Despite significant investment in school one-to-one device programs, little is known about which aspects of program implementation work and why. Through a comparison of two implementation models, adopter-diffusion and saturation, and using existing data from the One Laptop per Child Australia laptop program, we explored how factors of implementation may affect device diffusion, learning and educational outcomes, and program sustainability in schools. In this article we argue that more focused research into implementation of one-to-one device programs, moving beyond comparisons of “devices versus without devices,” is needed to provide reliable data to inform future program funding and advance this area of research.

Designing schools as effective 21st C learning spaces : a review

The Queensland Centre for Social Science Innovation was formed in 2012 to develop collaborations among the Queensland Government and five Queensland universities—The University of Queensland, Griffith University, Queensland University of Technology, James Cook University and Central Queensland University. Three priorities for initial projects were established by the Queensland Government with response by the participating universities. This project addressed the identified priority area: factors affecting educational achievement and investigation of the link between school design, refurbishment and educational outcomes. The proposal for this project indicated that a Review of research literature would be undertaken that linked school and classroom design with educational outcomes for learners in the 21st century. Further, research would be examined for impact of technology on staff and students, as well as learning spaces that addressed the diversity of student learners. Specific investigation of research on effective design to enhance learning outcomes for Aboriginal and Torres Strait Islander students was to be undertaken. The project therefore consists of a Review of research literature to provide an evidence base on the impact of school and classroom on educational outcomes. The original proposal indicated that indicators of successful school and classroom design would be student learning outcomes on a range of variables, with input, the specific architectural design elements. The review was undertaken during the period July 2012 to June 2013. A search was undertaken of journals, databases, and websources to identify relevant material. These were examined for evidence-based statements and design of learning spaces to enhance learning. The Review is comprehensive, and representative of issues raised in research, and conceptualisations and debates informing modern educational design. Initial findings indicated two key findings central to reading this Review. The first key finding is that the predominant focus of modern design of learning space is on process and the engagement of stakeholders. Schools are social institutions and development of a school as a learning space to suit 21st century learning needs necessarily involves the staff, students and other members of the community as key participants. The concept of social aspects of design is threaded throughout the Review. The second key finding is that little research explicitly examined the relationship between the design of learning spaces and educational outcomes. While some research does exist, the most explicitly-focused research uses narrow test-based achievement as the learning outcomes. These are not sympathetic to the overall framings of the research on 21st century learning, future schooling and the needs of the new generation of learners and society.

Ethical values in emergency medical services: A pilot study

Background Ambulance professionals often address conflicts between ethical values. As individuals’ values represent basic convictions of what is right or good and motivate behaviour, research is needed to understand their value profiles. Objectives To translate and adapt the Managerial Values Profile to Spanish and Swedish, and measure the presence of utilitarianism, moral rights and/or social justice in ambulance professionals’ value profiles in Spain and Sweden. Methods The instrument was translated and culturally adapted. A content validity index was calculated. Pilot tests were carried out with 46 participants. Ethical considerations This study conforms to the ethical principles for research involving human subjects and adheres to national laws and regulations concerning informed consent and confidentiality. Findings Spanish professionals favoured justice and Swedish professionals’ rights in their ambulance organizations. Both countries favoured utilitarianism least. Gender differences across countries showed that males favoured rights. Spanish female professionals favoured justice most strongly of all. Discussion Swedes favour rights while Spaniards favour justice. Both contexts scored low on utilitarianism focusing on total population effect, preferring the opposite, individualized approach of the rights and justice perspectives. Organizational investment in a utilitarian perspective might jeopardize ambulance professionals’ moral right to make individual assessments based on the needs of the patient at hand. Utilitarianism and a caring ethos appear as stark opposites. However, a caring ethos in its turn might well involve unreasonable demands on the individual carer’s professional role. Since both the justice and rights perspectives portrayed in the survey mainly concern relationship to the organization and peers within the organization, this relationship might at worst be given priority over the equal treatment and moral rights of the patient. Conclusion A balanced view on ethical perspectives is needed to make professionals observant and ready to act optimally – especially if these perspectives are used in patient care. Research is needed to clarify how justice and rights are prioritized by ambulance services and whether or not these organization-related values are also implemented in patient care.

IdeaWall: Bridging the digital and non-digital worlds to facilitate distant collaboration

Creative and ad-hoc work often involves non-digital artifacts, such as whiteboards and post-it notes. The preferred method of brainstorming and idea development, while facilitating work among collocated participants, makes it particularly tricky to involve remote participants, not even mentioning cases where live social involvement is required and the number and location of remote participants can be vast. Our work has originally focused on large distributed teams in business entities. Vast majority of teams in large organizations are distributed teams. Our team of corporate researchers decided to identify state of the art technologies that could facilitate the scenarios mentioned above. This paper is an account of a research project in the area of enterprise collaboration, with a strong focus on the aspects of human computer interaction in mixed mode environments, especially in areas of collaboration where computers still play a secondary role. It is describing a currently running corporate research project. In this paper we signal the potential use of the technology in situation, where community involvement is either required or desirable. The goal of the paper is to initiate a discussion on the use of technologies, initially designed as supporting enterprise collaboration, in situation requiring community engagement. In other words, it is a contribution of technically focused research exploring the uses of the technology in areas such as social engagement and community involvement. © 2012 IEEE.