PtSnIr/C anode electrocatalysts: Promoting effect in direct ethanol fuel cells

This study investigates the promoting effect of PtSnIr/C (1:1:1) electrocatalyst anode, prepared by polymeric precursor method, on the ethanol oxidation reaction in a direct ethanol fuel cell (DEFC). All of the materials used were 20% metal m/m on carbon. X-ray photoelectron spectroscopy (XPS) analysis showed the presence of Pt, PtOH 2, PtO 2, SnO 2 and IrO 2 at the electrocatalyst surface, indicating a possible decorated particle structure. X-ray diffractometry (XRD) analysis indicated metallic Pt and Ir as well as the formation of an alloy with Sn. Using the PtSnIr/C electrocatalyst prepared here with two times lower loading of Pt than PtSn/C E-tek electrocatalyst, it was possible to obtain the same maximum power density found for the commercial material. The main reaction product was acetic acid probably due to the presence of oxides, in this point the bifunctional mechanism is predominant, but an electronic effect should not be discarded. © 2012 Sociedade Brasileira de Química.

Desenvolvimento e avaliação do desempenho de um equipamento para ensaio dinâmico de rodado agrícola individual

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Produção de tomate em função da “vibração” das plantas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Morfometria e descrição de otólitos de dourada (Brachyplatystoma rosseauxii) (Castelnau, 1855) e de piramutaba (B. vaillantii) (Valenciennes, 1840) (Siluriformes: pimelodidae) e verificação de anéis de crescimento em otólitos de juvenis de dourada e de piramutaba na Ilha de Colares - Baía de Marajó-PA

A dourada (Brachyplatystoma rousseauxii) e a piramutaba (B. vaillantii), são dois bagres migradores de água doce, exploradas pela pesca comercial artesanal e industrial na Amazônia. São de grande importância para a pesca comercial nesta região e atualmente seus estoques estão em estado de sobrexplotação. A literatura cientifica não registra trabalhos sobre a biologia e ecologia referentes aos estágios juvenis destes bagres. Em estudos de dinâmica populacional, a correta estimação da idade é essencial na estimativa dos parâmetros de crescimento, que são essenciais para a avaliação dos estoques. Os estudos de determinação de idade geralmente são feitos em espécimes subadultos e adultos e a idade dos juvenis é retrocalculada. O que pode levar aos erros de avaliação. A presente pesquisa teve como objetivos: (1) descrever e estimar as relações entre as medidas morfométricas dos otólitos lapillus com as medidas corporais de dourada e de piramutaba, e (2) verificar o surgimento dos primeiros anéis de crescimento nos espécimes juvenis. Para o estudo da morfometria e descrição foram utilizados otólitos de dourada e de piramutaba juvenis, sub-adultos e adultos provenientes dos Municípios de Colares (PA), Almeirim (PA), Santarém (PA), Manaus (AM), do Distrito de Mosqueiro (PA), e do estuário amazônico. O período de coletas foi diferente para cada local, e de setembro de 1996 a janeiro de 2006. As seguintes relações foram estimadas: comprimento furcal dos espécimes (CF) x peso total dos espécimes (PT); CF x comprimento máximo do otólito (CMO); CF x largura máxima do otólito (LMO); CF x peso total do otólito (PTO); PT x CMO; PT x LMO e PT x PTO. E as equações estimadas foram: Dourada: PT = 9,5 x 10-6 x Cf 3,0279, CF = 25,259 * CMO1,1571, CF = 40,626 * LMO1,2127, CF = 840,419 * PTO0,4077, PT = 0,125 * CMO3,6547, PT = 0,568 * LMO3,8294, PT = 7549,98 * PTO1,2651; Piramutaba: PT = 5,4 x 10-6 x Cf 3,1441, CF = 31,871 * CMO1,3381, CF = 55,852 * LMO1,3722, CF = 1641,064 * PTO0,4686, PT = 0,3127 * CMO4,1857, PT = 1,823 * LMO4,2788, PT = 66675,977 * PTO1,4508. A descrição dos otólitos classificou os lapilli de dourada e de piramutaba em três categorias conforme seu desenvolvimento e CF dos espécimes: dourada I (60 a 80 mm), dourada II (80 a 110 mm), dourada III (110 a 210 mm), piramutaba I (65 a 80 mm), piramutaba II (80 a 110 mm), e piramutaba III (110 a 190 mm). E no estudo da verificação de anéis de crescimento em lapillus foram utilizados somente os juvenis, com CF £ 200 mm. Na baía de Marajó, a dourada e a piramutaba forma o primeiro anel de crescimento com CF médio de 175,03 mm e 171,03 mm, respectivamente. E as duas espécies têm entre nove e doze meses de idade quando formam o primeiro anel de crescimento. Os raios médios do primeiro anel hialino do corte transversal do lapillus de dourada e de piramutaba foram 0,36 mm (± 0,03) e 0,33 mm (± 0,01), respectivamente. O raio total médio do corte transversal do lapillus de dourada foi de 0,64 mm (± 0,14) e o da piramutaba foi de 0,53 mm (± 0,09). A equação obtida entre o raio total do corte transversal do lapillus de juvenis de dourada com seu CF foi CF = 248,589 * Rt1,1901. E a equação estimada para a piramutaba foi CF = 400,494 * Rt1,7178. Douradas e piramutabas com CF de 60-70 mm têm idade de três a seis meses, com CF de 70-110 mm têm de seis a nove meses e com CF de 110-200 mm têm de nove a doze meses.

Efeito da endogamia na seleção genômica em populções simuladas de aves poedeiras

Pós-graduação em Genética e Melhoramento Animal - FCAV

Influence of a co-substituted A-site on structural characteristics and ferroelectricity of (Pb, Ba, Ca)TiO3 complex perovskites: analysis of local-, medium- and long-range order

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Sistema eletrohidráulico para acionamento da esteira vibratória do arrancador-invertedor de amendoim

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Platinum nanoparticles incorporated in silsesquioxane for use in LbL films for the simultaneous detection of dopamine and ascorbic acid

We describe the preparation of platinum nanoparticles (PtNPs) using the 3-n-propylpyridinium silsesquioxane chloride (SiPy+Cl-) as a nanoreactor and stabilizer. The formation of PtNPs was monitored by UV-Vis spectroscopy by measuring the decrease in the intensity of the band at 375 nm, which is attributed to the electronic absorption of PtCl62- ions. TEM images of Pt-SiPy+Cl- nanohybrid indicated an average size of 3-40 nm for PtNPs. The Pt-SiPy+Cl- was used as a polycation in the preparation of layer-by-layer films (LbL) on a glass substrate coated with fluorine-doped tin oxide (FTO) alternating with the polyanion poly(vinyl sulfonic acid) (PVS). The films were electrochemically tested in sulfuric acid to confirm the deposition of Pt-SiPy+Cl- onto the LbL films, observing the adsorption and desorption of hydrogen (E-pa = 0.1 V) and by the redox process of formation for PtO with E-pa = 1.3 V and E-pc = 0.65 V. FTIR and Raman spectra confirmed the presence of the PVS and Pt-SiPy+Cl- in the LbL films. A linear increase in the absorbance in the UV-Vis spectra of the Pt-SiPy+Cl- at 258 nm (pi -> pi* transition of the pyridine groups) with a number of Pt-SiPy+Cl-/PVS or PVS/SiPy+Cl- bilayers (R = 0.992) was observed. These LbL films were tested for the determination of dopamine (DA) in the presence of ascorbic acid (AA) with a detection limit (DL) on the order of 2.6 x 10(-6) mol L-1 and a quantification limit (QL) of 8.6 x 10(-6) mol L-1. The films exhibited a good repeatability and reproducibility, providing a potential difference of 550 mV for the oxidation of DA with AA interferent.

Desempenho de híbridos de tomate de crescimento indeterminado em função de sistemas de condução de plantas

O presente trabalho teve como objetivo avaliar dois sistemas de tutoramento e condução de plantas na produtividade e seus componentes em híbridos de tomateiro dos segmentos Salada Longa Vida e Santa Cruz de crescimento indeterminado, visando ao consumo in natura. Adotou-se o delineamento em blocos ao acaso com os tratamentos em esquema fatorial 5x2, quatro repetições, sendo avaliados cinco híbridos comerciais, três pertencentes ao grupo Salada Longa Vida ('Alambra', 'Paron' e 'Forty') e dois do grupo Santa Cruz ('Débora Pto' e 'Ellus'), em dois sistemas de condução de plantas (bambu e fitilho). O experimento foi conduzido em condições de campo, em Itatiba (SP), de julho de 2007 a janeiro de 2008. Foram consideradas todas as plantas de cada parcela e avaliaram-se a produtividade total, produtividade comercial, produção por planta, massa média de frutos, número total de frutos, número de frutos comercializáveis, número de frutos das classes '3A', '2A' e '1A', número de frutos manchado e com lóculo aberto. Não houve interação entre cultivar e sistema de condução de planta para maioria das características avaliadas, exceto número total de frutos, número de frutos comercializáveis e número de frutos da classe '2A'. O sistema de condução de plantas com uma haste tutorada com fitilho proporcionou incremento na massa média de frutos e número de frutos da classe '3A', e decréscimo do número de frutos da classe '1A', sem reduzir a produtividade total e comercial quando comparado ao método de condução tradicional no bambu com duas hastes por planta.

Reaktivität von Dihypersilylhalogenorganylplumbanen

Organylhalogenide RX reagieren formal gemäß einer oxidativen 1,1-Addition mit Dihypersilylplumbylen) PbHyp2 zu Dihypersilyl-halogenorganylplumbanen PbHyp2RX. Diese Umsetzung gelingt mit nahezu allen untersuchten Organylresten, lediglich beispielsweise der Mesitylrest erweist sich als zu sperrig (R = Me, Et, nPr, iPr, tBu, Hx, cHx, Ad, Ph, C6F5, oTo, mTo, pTo, Naph, Anthr).rnrnFür einige Halogenorganyle wird eine analoge Addition auch an das zinnhomologe Dihypersilylstannylen beschrieben.rnrnDie untersuchten Addukte sind thermisch und gegenüber UV-Strahlung, Sauerstoff und Wasser deutlich weniger empfindlich als vergleichbare andere blei- und zinnorganische Verbindungen.rnrnUmfangreiche NMR-Datensätze beschreiben eine markante Hoch-feldverschiebung der Hypersilylprotonen beim Übergang von PbHyp2 hin zu PbHyp2RX, die für Arylreste stärker ausfällt als für Alkylreste.rnrnEin Großteil der Addukte wurde einkristallin erhalten und wird anhand der röntgendiffraktometrisch ermittelten Strukturparameter detailliert charakterisiert. rnrnEs finden sich gegenüber dem idealen Tetraderwinkel auffällig stark aufgeweitete Si Pb Si-Winkel von 130-143°, während die anderen Winkel mehrheitlich unter dem theoretischen Idealwert bleiben (Si Pb X: 94 103°; Si Pb C: 98-112°; C Pb X: 95-103°). Insbesondere größere, weichere Reste und planare Arylplumbane rücken näher an das Halogen heran.rnDie insgesamt recht hohen Blei-Halogen-Abstände nehmen von den Chloriden hin zu den Iodiden zu. Die Iodoplumbane zeigen dabei generell die kleinsten Pb Si und die größten Pb C Abstände. Alkylplumbane weisen längere Pb C Bindungen auf als ansonsten vergleichbare Arylplumbane.rnrnViele der gefundenen Molekülstrukturen zeigen Anzeichen hoher sterischer Spannung in Form von Substituentenverzerrungen. rnrnDie Bildungsgeschwindigkeit der Addukte ist auch bei tiefen Temperaturen hoch. Sie nimmt von X = Cl über Br hin zu I zu und ist für Alkylreste höher als für Aryle. Die Zerfallsgeschwindigkeiten verhalten sich genau entgegengesetzt. Bei den Thermolysen wird regelmäßig Hypersilylhalogenid eliminiert. Dabei entstehen in Abwesenheit koordinierender Solventien Dihypersilyl-diorganylplumbane PbHyp2R2.rnAndere, unbekannte Zerfallskanäle führen zu unerwarteten Produkten, wie dem Iodonium-verbrückten, cyclischen Tetraplumbetan Pb4I(C6F5)Hyp3.rnrnIn Anwesenheit von Lewis-Basen hingegen können sich hetero-leptische Plumbylene bilden, wie am Beispiel eines Bitolyldiylbisplumbylens gezeigt wird. Dieses zeigt auch, dass prinzipiell eine zweifache Addition von Dihalogenorganylen an zwei Äqui-valente Dihypersilylplumbylen möglich ist. Entsprechende Untersuchungen beschäftigen sich ausführlich mit dafür geeigneten und ungeeigneten Organdiylresten.rnrnUnter günstigen reduktiven Bedingungen lassen sich mittels Metal-lierungsreagenz aus den Dihypersilylhalogenorganylplumbanen unter Halogenidentzug Plumbanide erhalten, die in Form getrennter Ionenpaare isolierbar sind. Diese lassen sich in Ana-logie zu den zuvor beschriebenen Plumbanen ebenfalls als Addukt aus Dihypersilylplumbylen und Lithiumorganylen darstellen.rnrnUnter geeigneten speziellen Bedingungen sind neben metallierten auch formal hydridierte Halogenplumbanide zugänglich.rnrnEntsprechend einer geringen Hybridisierung am zentralen Blei-atom, also eines hohen p-AO-Charakters der bindenden Molekülorbitale und s-AO-Charakters des LEP-Orbitals ergeben sich keine trigonal-planaren, sondern Strukturen mit Substituenten-winkeln sogar nahe bei 90°. Die Bindungslängen zum Blei sind deutlich größere als bei den entsprechenden Halogenplumbanen.rnrnEin besonderes Augenmerk der Arbeit liegt auf der Betrachtung von langlebigen und persistenten heteroleptischen Plumbyl-Radikalen, die durch milde Oxidation mittels PbNsi23) aus den Dihypersilylorganylplumbaniden erhalten werden. Während bislang nur homoleptische Vertreter bekannt waren, die aufgrund des sterischen Anspruchs der Substituenten und aufgrund von Hyperkonjugation von axialsymmetrischer nahezu planarer Geometrie sind, findet sich für die heteroleptischen Plumbyle dieser Arbeit eine stärker pyramidale Geometrie. Ausführlich diskutierte EPR-Experimente liefern Spektren, die gut mit Simulationen für die entsprechenden Radikale übereinstimmen.rnrnDie im Zentrum der Betrachtungen dieser Arbeit stehenden Dihypersilylhalogenorganylplumbane stellen somit einen aussichtsreichen und darüber hinaus persistenten und gut zu handhabenden Ausgangspunkt bei der Darstellung neuartiger und interessanter Spezies dar.

Hydraulic evaluation of the gyro electric wave energy converter

Motivation Thanks for a scholarship offered by ALma Mater Studiorum I could stay in Denmark for six months during which I could do physical tests on the device Gyro PTO at the Departmet of Civil Engineering of Aalborg University. Aim The goal of my thesis is an hydraulic evaluation of the device: Gyro PTO, a gyroscopic device for conversion of mechanical energy in ocean surface waves to electrical energy. The principle of the system is the application of the gyroscopic moment of flywheels equipped on a swing float excited by waves. The laboratory activities were carried out by: Morten Kramer, Jan Olsen, Irene Guaraldi, Morten Thøtt, Nikolaj Holk. The main purpose of the tests was to investigate the power absorption performance in irregular waves, but testing also included performance measures in regular waves and simple tests to get knowledge about characteristics of the device, which could facilitate the possibility of performing numerical simulations and optimizations. Methodology To generate the waves and measure the performance of the device a workstation was created in the laboratory. The workstation consist of four computers in each of wich there was a different program. Programs have been used : Awasys6, LabView, Wave lab, Motive optitrack, Matlab, Autocad Main Results Thanks to the obtained data with the tank testing was possible to make the process of wave analisys. We obtained significant wave height and period through a script Matlab and then the values of power produced, and energy efficiency of the device for two types of waves: regular and irregular. We also got results as: physical size, weight, inertia moments, hydrostatics, eigen periods, mooring stiffness, friction, hydrodynamic coefficients etc. We obtained significant parameters related to the prototype in the laboratory after which we scale up the results obtained for two future applications: one in Nissun Brending and in the North Sea. Conclusions The main conclusion on the testing is that more focus should be put into ensuring a stable and positive power output in a variety of wave conditions. In the irregular waves the power production was negative and therefore it does not make sense to scale up the results directly. The average measured capture width in the regular waves was 0.21 m. As the device width is 0.63 m this corresponds to a capture width ratio of: 0.21/0.63 * 100 = 33 %. Let’s assume that it is possible to get the device to produce as well in irregular waves under any wave conditions, and lets further assume that the yearly absorbed energy can be converted into electricity at a PTO-efficiency of 90 %. Under all those assumptions the results in table are found, i.e. a Nissum Bredning would produce 0.87 MWh/year and a North Sea device 85 MWh/year.

Effect of Supplemental Oxygen versus Dobutamine Administration on Liver Oxygen Tension in dPP-Guided Normovolemic Pigs

Background: Difference in pulse pressure (dPP) confirms adequate intravascular filling as a prerequisite for tissue perfusion. We hypothesized that both oxygen and dobutamine increase liver tissue oxygen tension (ptO(2)). Methods: Eight anesthetized pigs received dPP-guided fluid management. Hepatic pO(2) was measured with Clark-type electrodes placed subcapsularly, and on the liver surface. Pigs received: (1) supplemental oxygen (F(i)O(2) 1.0); (2) dobutamine 2.5 mug/kg/min, and (3) dobutamine 5 mug/kg/min. Data were analyzed using repeated-measures ANOVA followed by a Tukey post-test for multiple comparisons. ptO(2 )measured subcapsularly and at the liver surface were compared using the Bland-Altman plot. Results: Variation in F(i)O(2) changed local hepatic tissue ptO(2) [subcapsular measurement: 39 +/- 12 (F(i)O(2) 0.3), 89 +/- 35 mm Hg (F(i)O(2) 1.0, p = 0.01 vs. F(i)O(2) 0.3), 44 +/- 10 mm Hg (F(i)O(2) 0.3, p = 0.05 vs. F(i)O(2) 1.0); surface measurement: 52 +/- 35 (F(i)O(2) 0.3), 112 +/- 24 mm Hg (F(i)O(2) 1.0, p = 0.001 vs. F(i)O(2) 0.3), 54 +/- 24 mm Hg (F(i)O(2) 0.3, p = 0.001 vs. F(i)O(2) 1.0)]. Surface measurements were widely scattered compared to subcapsular measurements (bias: -15 mm Hg, precision: 76.3 mm Hg). Dobutamine did not affect hepatic oxygenation. Conclusion: Supplemental oxygen increased hepatic tissue pO(2) while dobutamine did not. Although less invasive, the use of surface measurements is discouraged.

Light regulates motility, attachment and virulence in the plant pathogen Pseudomonas syringae pv tomato DC3000.

Pseudomonas syringae pv tomato DC3000 (Pto) is the causal agent of the bacterial speck of tomato, which leads to significant economic losses in this crop. Pto inhabits the tomato phyllosphere, where the pathogen is highly exposed to light, among other environmental factors. Light represents a stressful condition and acts as a source of information associated with different plant defence levels. Here, we analysed the presence of both blue and red light photoreceptors in a group of Pseudomonas. In addition, we studied the effect of white, blue and red light on Pto features related to epiphytic fitness. While white and blue light inhibit motility, bacterial attachment to plant leaves is promoted. Moreover, these phenotypes are altered in a blue-light receptor mutant. These light-controlled changes during the epiphytic stage cause a reduction in virulence, highlighting the relevance of motility during the entry process to the plant apoplast. This study demonstrated the key role of light perception in the Pto phenotype switching and its effect on virulence.

Desarrollo de un Procedimiento Basado en Algoritmos de Optimización para el Dimensionado de Absorbedores Puntuales Aplicados a la Conversión de Energía Undimotriz

La energía transportada por el oleaje a través de los océanos (energía undimotriz) se enmarca dentro de las denominadas energías oceánicas. Su aprovechamiento para generar energía eléctrica (o ser aprovechada de alguna otra forma) es una idea reflejada ya hace más de dos siglos en una patente (1799). Desde entonces, y con especial intensidad desde los años 70, ha venido despertando el interés de instituciones ligadas al I+D+i y empresas del sector energético y tecnológico, debido principalmente a la magnitud del recurso disponible. Actualmente se puede considerar al sector en un estado precomercial, con un amplio rango de dispositivos y tecnologías en diferente grado de desarrollo en los que ninguno destaca sobre los otros (ni ha demostrado su viabilidad económica), y sin que se aprecie una tendencia a converger un único dispositivo (o un número reducido de ellos). El recurso energético que se está tratando de aprovechar, pese a compartir la característica de no-controlabilidad con otras fuentes de energía renovable como la eólica o la solar, presenta una variabilidad adicional. De esta manera, diferentes localizaciones, pese a poder presentar recursos de contenido energético similar, presentan oleajes de características muy diferentes en términos de alturas y periodos de oleaje, y en la dispersión estadística de estos valores. Esta variabilidad en el oleaje hace que cobre especial relevancia la adecuación de los dispositivos de aprovechamiento de energía undimotriz (WEC: Wave Energy Converter) a su localización, de cara a mejorar su viabilidad económica. Parece razonable suponer que, en un futuro, el proceso de diseño de un parque de generación undimotriz implique un rediseño (en base a una tecnología conocida) para cada proyecto de implantación en una nueva localización. El objetivo de esta tesis es plantear un procedimiento de dimensionado de una tecnología de aprovechamiento de la energía undimotriz concreta: los absorbedores puntuales. Dicha metodología de diseño se plantea como un problema de optimización matemático, el cual se resuelve utilizando un algoritmo de optimización bioinspirado: evolución diferencial. Este planteamiento permite automatizar la fase previa de dimensionado implementando la metodología en un código de programación. El proceso de diseño de un WEC es un problema de ingería complejo, por lo que no considera factible el planteamiento de un diseño completo mediante un único procedimiento de optimización matemático. En vez de eso, se platea el proceso de diseño en diferentes etapas, de manera que la metodología desarrollada en esta tesis se utilice para obtener las dimensiones básicas de una solución de referencia de WEC, la cual será utilizada como punto de partida para continuar con las etapas posteriores del proceso de diseño. La metodología de dimensionado previo presentada en esta tesis parte de unas condiciones de contorno de diseño definidas previamente, tales como: localización, características del sistema de generación de energía eléctrica (PTO: Power Take-Off), estrategia de extracción de energía eléctrica y concepto concreto de WEC). Utilizando un algoritmo de evolución diferencial multi-objetivo se obtiene un conjunto de soluciones factibles (de acuerdo con una ciertas restricciones técnicas y dimensionales) y óptimas (de acuerdo con una serie de funciones objetivo de pseudo-coste y pseudo-beneficio). Dicho conjunto de soluciones o dimensiones de WEC es utilizado como caso de referencia en las posteriores etapas de diseño. En el documento de la tesis se presentan dos versiones de dicha metodología con dos modelos diferentes de evaluación de las soluciones candidatas. Por un lado, se presenta un modelo en el dominio de la frecuencia que presenta importantes simplificaciones en cuanto al tratamiento del recurso del oleaje. Este procedimiento presenta una menor carga computacional pero una mayor incertidumbre en los resultados, la cual puede traducirse en trabajo adicional en las etapas posteriores del proceso de diseño. Sin embargo, el uso de esta metodología resulta conveniente para realizar análisis paramétricos previos de las condiciones de contorno, tales como la localización seleccionada. Por otro lado, la segunda metodología propuesta utiliza modelos en el domino estocástico, lo que aumenta la carga computacional, pero permite obtener resultados con menos incertidumbre e información estadística muy útil para el proceso de diseño. Por este motivo, esta metodología es más adecuada para su uso en un proceso de dimensionado completo de un WEC. La metodología desarrollada durante la tesis ha sido utilizada en un proyecto industrial de evaluación energética preliminar de una planta de energía undimotriz. En dicho proceso de evaluación, el método de dimensionado previo fue utilizado en una primera etapa, de cara a obtener un conjunto de soluciones factibles de acuerdo con una serie de restricciones técnicas básicas. La selección y refinamiento de la geometría de la solución geométrica de WEC propuesta fue realizada a posteriori (por otros participantes del proyecto) utilizando un modelo detallado en el dominio del tiempo y un modelo de evaluación económica del dispositivo. El uso de esta metodología puede ayudar a reducir las iteraciones manuales y a mejorar los resultados obtenidos en estas últimas etapas del proyecto. ABSTRACT The energy transported by ocean waves (wave energy) is framed within the so-called oceanic energies. Its use to generate electric energy (or desalinate ocean water, etc.) is an idea expressed first time in a patent two centuries ago (1799). Ever since, but specially since the 1970’s, this energy has become interesting for R&D institutions and companies related with the technological and energetic sectors mainly because of the magnitude of available energy. Nowadays the development of this technology can be considered to be in a pre-commercial stage, with a wide range of devices and technologies developed to different degrees but with none standing out nor economically viable. Nor do these technologies seem ready to converge to a single device (or a reduce number of devices). The energy resource to be exploited shares its non-controllability with other renewable energy sources such as wind and solar. However, wave energy presents an additional short-term variability due to its oscillatory nature. Thus, different locations may show waves with similar energy content but different characteristics such as wave height or wave period. This variability in ocean waves makes it very important that the devices for harnessing wave energy (WEC: Wave Energy Converter) fit closely to the characteristics of their location in order to improve their economic viability. It seems reasonable to assume that, in the future, the process of designing a wave power plant will involve a re-design (based on a well-known technology) for each implementation project in any new location. The objective of this PhD thesis is to propose a dimensioning method for a specific wave-energy-harnessing technology: point absorbers. This design methodology is presented as a mathematical optimization problem solved by using an optimization bio-inspired algorithm: differential evolution. This approach allows automating the preliminary dimensioning stage by implementing the methodology in programmed code. The design process of a WEC is a complex engineering problem, so the complete design is not feasible using a single mathematical optimization procedure. Instead, the design process is proposed in different stages, so the methodology developed in this thesis is used for the basic dimensions of a reference solution of the WEC, which would be used as a starting point for the later stages of the design process. The preliminary dimensioning methodology presented in this thesis starts from some previously defined boundary conditions such as: location, power take-off (PTO) characteristic, strategy of energy extraction and specific WEC technology. Using a differential multi-objective evolutionary algorithm produces a set of feasible solutions (according to certain technical and dimensional constraints) and optimal solutions (according to a set of pseudo-cost and pseudo-benefit objective functions). This set of solutions or WEC dimensions are used as a reference case in subsequent stages of design. In the document of this thesis, two versions of this methodology with two different models of evaluation of candidate solutions are presented. On the one hand, a model in the frequency domain that has significant simplifications in the treatment of the wave resource is presented. This method implies a lower computational load but increased uncertainty in the results, which may lead to additional work in the later stages of the design process. However, use of this methodology is useful in order to perform previous parametric analysis of boundary conditions such as the selected location. On the other hand, the second method uses stochastic models, increasing the computational load, but providing results with smaller uncertainty and very useful statistical information for the design process. Therefore, this method is more suitable to be used in a detail design process for full dimensioning of the WEC. The methodology developed throughout the thesis has been used in an industrial project for preliminary energetic assessment of a wave energy power plant. In this assessment process, the method of previous dimensioning was used in the first stage, in order to obtain a set of feasible solutions according to a set of basic technical constraints. The geometry of the WEC was refined and selected subsequently (by other project participants) using a detailed model in the time domain and a model of economic evaluation of the device. Using this methodology can help to reduce the number of design iterations and to improve the results obtained in the last stages of the project.

Design Parameter Analysis of Point Absorber WEC via an Evolutionary-Algorithm-Based Dimensioning Tool

Wave energy conversion has an essential difference from other renewable energies since the dependence between the devices design and the energy resource is stronger. Dimensioning is therefore considered a key stage when a design project of Wave Energy Converters (WEC) is undertaken. Location, WEC concept, Power Take-Off (PTO) type, control strategy and hydrodynamic resonance considerations are some of the critical aspects to take into account to achieve a good performance. The paper proposes an automatic dimensioning methodology to be accomplished at the initial design project stages and the following elements are described to carry out the study: an optimization design algorithm, its objective functions and restrictions, a PTO model, as well as a procedure to evaluate the WEC energy production. After that, a parametric analysis is included considering different combinations of the key parameters previously introduced. A variety of study cases are analysed from the point of view of energy production for different design-parameters and all of them are compared with a reference case. Finally, a discussion is presented based on the results obtained, and some recommendations to face the WEC design stage are given.