Ontogeny and nutritional programming of the hepatic growth hormone-insulin-like growth factor-prolactin axis in the sheep

The liver is an important metabolic and endocrine organ in the fetus but the extent to which its hormone receptor (R) sensitivity is developmentally regulated in early life is not fully established. We, therefore, examined developmental changes in mRNA abundance for the growth hormone (GH) and prolactin (PRL) receptors (R) plus insulin-like growth factor (IGF)-I and –II and their receptors. Fetal and postnatal sheep were sampled at either 80, or 140 days gestation, 1, 30 days or six months of age. The effect of maternal nutrient restriction between early to mid (i.e. 28 to 80 days gestation, the time of early liver growth) gestation on gene expression was also examined in the fetus and juvenile offspring. Gene expression for the GHR, PRLR and IGF-IR increased through gestation peaking at birth, whereas IGF-I was maximal near to term. In contrast, IGF-II mRNA decreased between mid and late gestation to increase after birth whereas IGF-IIR remained unchanged. A substantial decline in mRNA abundance for GHR, PRLR and IGF-IR then occurred up to six months. Maternal nutrient restriction reduced GHR and IGF-IIR mRNA abundance in the fetus, but caused a precocious increase in the PRLR. Gene expression for IGF-I and –II were increased in juvenile offspring born to nutrient restricted mothers. In conclusion, there are marked differences in the developmental ontogeny and nutritional programming of specific hormones and their receptors involved in hepatic growth and development in the fetus. These could contribute to changes in liver function during adult life.

Ontogeny and nutritional programming of mitochondrial proteins in the ovine kidney, liver and lung

This study investigated the developmental and nutritional programming of two important mitochondrial proteins, namely voltage dependent anion channel (VDAC) and cytochrome c in the sheep kidney, liver and lung. The effect of maternal nutrient restriction between early to mid gestation (i.e. 28 to 80 days gestation, the period of maximal placental growth) on the abundance of these proteins was also examined in fetal and juvenile offspring. Fetuses were sampled at 80 and 140 days gestation (term ~147 days), and postnatal animals at 1 and 30 days and 6 months of age. The abundance of VDAC peaked at 140 days gestation in the lung, compared with 1 day after birth in the kidney and liver, whereas cytochrome c abundance was greatest at 140 days gestation in the liver, 1 day after birth in the kidney and 6 months of age in lungs. This differential ontogeny in mitochondrial protein abundance between tissues was accompanied with very different tissue specific responses to changes in maternal food intake. In the liver, maternal nutrient restriction only increased mitochondrial protein abundance at 80 days gestation, compared with no effect in the kidney. In contrast, in the lung mitochondrial protein abundance was raised near to term, whereas VDAC abundance was decreased by 6 months of age. These findings demonstrate the tissue specific nature of mitochondrial protein development that reflects differences in functional adaptation after birth. The divergence in mitochondrial response between tissues to maternal nutrient restriction early in pregnancy further reflects these differential ontogeny’s.

New Rigorous Decomposition Methods for Mixed-integer Linear and Nonlinear Programming

Process systems design, operation and synthesis problems under uncertainty can readily be formulated as two-stage stochastic mixed-integer linear and nonlinear (nonconvex) programming (MILP and MINLP) problems. These problems, with a scenario based formulation, lead to large-scale MILPs/MINLPs that are well structured. The first part of the thesis proposes a new finitely convergent cross decomposition method (CD), where Benders decomposition (BD) and Dantzig-Wolfe decomposition (DWD) are combined in a unified framework to improve the solution of scenario based two-stage stochastic MILPs. This method alternates between DWD iterations and BD iterations, where DWD restricted master problems and BD primal problems yield a sequence of upper bounds, and BD relaxed master problems yield a sequence of lower bounds. A variant of CD, which includes multiple columns per iteration of DW restricted master problem and multiple cuts per iteration of BD relaxed master problem, called multicolumn-multicut CD is then developed to improve solution time. Finally, an extended cross decomposition method (ECD) for solving two-stage stochastic programs with risk constraints is proposed. In this approach, a CD approach at the first level and DWD at a second level is used to solve the original problem to optimality. ECD has a computational advantage over a bilevel decomposition strategy or solving the monolith problem using an MILP solver. The second part of the thesis develops a joint decomposition approach combining Lagrangian decomposition (LD) and generalized Benders decomposition (GBD), to efficiently solve stochastic mixed-integer nonlinear nonconvex programming problems to global optimality, without the need for explicit branch and bound search. In this approach, LD subproblems and GBD subproblems are systematically solved in a single framework. The relaxed master problem obtained from the reformulation of the original problem, is solved only when necessary. A convexification of the relaxed master problem and a domain reduction procedure are integrated into the decomposition framework to improve solution efficiency. Using case studies taken from renewable resource and fossil-fuel based application in process systems engineering, it can be seen that these novel decomposition approaches have significant benefit over classical decomposition methods and state-of-the-art MILP/MINLP global optimization solvers.

Implantació d'un sistema SCADA en una cèl·lula flexible de fabricació

La Universitat de Vic disposa, entre altres equips, d’una cèl·lula flexible de fabricació, del fabricant Festo, que simula un procés de formació de palets amb els productes que es disposen en un magatzem intermedi. Aquesta cèl·lula està composta de quatre estacions de muntatge diferenciades (càrrega de palets, càrrega de plaques, magatzem intermedi i transport). Cada una disposa d'un PLC SIEMENS S7-300 per la seva automatització, i tots aquests es troben interconnectats amb una xarxa industrial Profibus. L'objectiu d'aquest projecte és implantar el sistema SCADA Vijeo Citect pel control i supervisió de l'estació magatzem d'aquesta cèl·lula flexible de fabricació, establint també un intercanvi de dades entre l'SCADA i el Microsoft Access, per poder ser utilitzat per la docència. Aquest projecte s'ha desenvolupat en cinc fases diferents: 1. La primera fase s'ha dedicat a l'automatització pròpiament de l'estació magatzem a partir de l'autòmat programable Siemens S7-300 i complint amb les necessitats plantejades. 2. En la segona fase s'ha programat i establert la comunicació per l'intercanvi de dades (lectura i escriptura) entre el sistema SCADA Vijeo Citect i la base de dades de Microsoft Access. 3. En la tercera fase s'ha elaborat i programat l'entorn gràfic de supervisió i control del procés a partir del sistema SCADA Vijeo Citect. 4. En la quarta fase s'ha instal·lat un OPC Server en el PC i s'ha establert la comunicació entre el PLC i el sistema SCADA. 5. Finalment s'ha anat revisant i depurant les diferents programacions i comunicacions per tal de que el sistema funcioni com a un conjunt.

Desenvolvimento de Aplicação para a Otimização de Processo Produtivo

Empreendimentos industriais requerem o acompanhamento completo e preciso de dados de máquinas em tempo real, integrando as atividades do chão de fábrica com a engenharia, suporte e negócios. É reconhecido que sistemas de monitorização são fundamentais para melhorar a qualidade do produto, reduzir os tempos e para a adaptação rápida às mudanças de produção. Os sensores de processos possuem custos altos, não são compactos e são de difícil implementação. Portanto, seria estratégico desenvolver sistemas de monitorização que usufruem ao máximo dos recursos já existentes nas máquinas e ferramentas e que não representem custos adicionais elevados e de difícil implementação. O uso de PLC nas indústrias é crescente. Estes mostram-se como ferramentas potenciais para atender a estas exigências. Os PLC possuem os recursos necessários para a aquisição de informações e controlo das máquinas, facilitando a interação com um sistema SCADA. O objetivo do presente trabalho é pesquisar soluções sobre sistemas de monitorização que possam substituir um sistema instalado antiquado e encontrar uma solução para o controlo de um processo de vazamento. Para tal, foram consideradas duas soluções: uma passaria por desenvolver um sistema de monitorização que controlasse o processo de vazamento, e outra que permitisse ser o PLC a fazer o controlo, adquirindo um HMI apenas para monitorização. Esta última solução revelou-se como a melhor, visto que um PLC tem mais durabilidade em relação a um PC, em termos de atualizações de hardware e software. Assim, foram criadas funções no PLC para fazer o controlo de vazamento e foi adquirido uma consola Beijer, e respetivo software de programação SCADA, para a criação do sistema de monitorização. Os resultados mostram que o PLC é capaz de executar o controlo, não sendo necessário investir em PC que são mais caros, bastando para isso adquirir sistemas SCADA simples e capazes.

A logic programming framework for possibilistic argumentation: formalization and logical properties

In the last decade defeasible argumentation frameworks have evolved to become a sound setting to formalize commonsense, qualitative reasoning. The logic programming paradigm has shown to be particularly useful for developing different argument-based frameworks on the basis of different variants of logic programming which incorporate defeasible rules. Most of such frameworks, however, are unable to deal with explicit uncertainty, nor with vague knowledge, as defeasibility is directly encoded in the object language. This paper presents Possibilistic Logic Programming (P-DeLP), a new logic programming language which combines features from argumentation theory and logic programming, incorporating as well the treatment of possibilistic uncertainty. Such features are formalized on the basis of PGL, a possibilistic logic based on G¨odel fuzzy logic. One of the applications of P-DeLP is providing an intelligent agent with non-monotonic, argumentative inference capabilities. In this paper we also provide a better understanding of such capabilities by defining two non-monotonic operators which model the expansion of a given program P by adding new weighed facts associated with argument conclusions and warranted literals, respectively. Different logical properties for the proposed operators are studied

Design and Programming of Cathodic Protection for SHIPS

In order to minimize the risk of failures or major renewals of hull structures during the ship's expected life span, it is imperative that the precaution must be taken with regard to an adequate margin of safety against any one or combination of failure modes including excessive yielding, buckling, brittle fracture, fatigue and corrosion. The most efficient system for combating underwater corrosion is 'cathodic protection'. The basic principle of this method is that the ship's structure is made cathodic, i.e. the anodic (corrosion) reactions are suppressed by the application of an opposing current and the ship is there by protected. This paper deals with state of art in cathodic protection and its programming in ship structure

Does the Stockholm Programme matter? The struggles over ownership of AFSJ multiannual programming. CEPS Paper in Liberty and Security No. 51/December 2012

Does the 2009 Stockholm Programme matter? This paper addresses the controversies experienced at EU institutional levels as to ‘who’ should have ownership of the contours of the EU’s policy and legislative multiannual programming in the Area of Freedom, Security and Justice (AFSJ) in a post-Lisbon Treaty landscape. It examines the struggles around the third multiannual programme on the AFSJ, i.e. the Stockholm Programme, and the dilemmas affecting its implementation. The latest affair to emerge relates to the lack of fulfilment by the European Commission of the commitment to provide a mid-term evaluation of the Stockholm Programme’s implementation by mid-2012, as requested by both the Council and the European Parliament. This paper shifts the focus to a broader perspective and raises the following questions: Is the Stockholm Programme actually relevant? What do the discussions behind its implementation tell us about the new institutional dynamics affecting European integration on the AFSJ? Does the EU actually need a new (post- Stockholm) multiannual programme for the period 2015–20? And last, what role should the EP play in legislative and policy programming in order to further strengthen the democratic accountability and legitimacy of the EU’s AFSJ?

Construção,modelagem e controle de um pêndulo invertido com CLP e software scada

Pós-graduação em Engenharia Elétrica - FEIS

Food advertisements during children's television programming in 2007: Comparison with ads in 1994 and the 2005 dietary recommendations

Childhood overweight and obesity are two major public health problems that are of economic and medical concern in the world today (Lobstein, Baur, & Uauy, 2004). Overweight conditions in childhood are important because they are widely prevalent, serious, and carry lifetime consequences for health and well being (Lobstein et al., 2004). Several studies have shown an association between television viewing and obesity in all age groups (Caroli, Argentieri, Cardone, & Masi, 2004; Harper, 2006; Vandewater & Huang, 2006; Wiecha et al., 2006). One mechanism that potentially links television viewing to childhood obesity is food advertising (Story, 2003). ^ The purpose of this study was to examine the types of foods advertised on children's television programming and to determine if there have been any changes in the number and types of commercials over the last 13 years. In addition, the food content of the advertisements was compared to the 2005 Dietary Guidelines to determine if the foods targeted were consistent with the current recommendations. Finally, each television network was analyzed individually to determine any differences between advertising on cable and regular programming. ^ A descriptive analysis was conducted on the most commonly advertised commercials during children's television programming on Saturday morning from 7 a.m. to 10:30 a.m. A total of 10 major television networks were viewed on three different Saturday mornings during June and July 2007. Commercial advertising accounted for approximately 19% of children's total viewing time. Of the 3,185 commercials, 28.5% were for foods, 67.7% were for non-food items, and 3.8% were PSAs. On average, there were 30 commercial advertisements and PSAs per hour, of which approximately nine were for food. ^ Of the 907 food advertisements, 72.0% were for foods classified in the fats, oils, and sugar group. The next largest group (17.3%) was for restaurant food of which 15.3% were for unhealthy/fast food restaurant fare. The most frequently advertised food product on Saturday morning television was regular cereal, accounting for 43.9% of all food advertisements. ^ Cable and regular programming stations varied slightly in the amount, length, and category of commercials. Cable television had about 50% less commercials and PSAs (1098) than regular programming (2087), but only had approximately 150 minutes less total commercial and PSA time; therefore, cable, in general, had longer commercials than regular programming. Overall, cable programming had more advertisements encouraging increased physical activity and positive nutrition behavior with less commercials focusing on the fats, oils, and sugar groups, compared to regular programming. ^ During the last 13 years, food advertisements have not improved, despite the recent IOM report on marketing foods to children (Institute of Medicine-Committee on Food Marketing and the Diets of Children and Youth, 2005), although the frequency of food advertisements has improved slightly. Children are now viewing an average of one food advertisement every 7 minutes, compared to one food advertisement every 5 minutes in 1994 (Kotz & Story, 1994). Therefore, manufacturers are putting a greater emphasis on advertising other products to children. Despite the recent attention to the issue of marketing unhealthy foods to children through television advertisements, not much progress has been noted since 1994. Further advocacy and regulatory issues concerning the content of advertisements during Saturday morning TV need to be explored. ^

Distributed www programming using (Ciao-) prolog and the pillow library

We discuss from a practical point of view a number of ssues involved in writing distributed Internet and WWW applications using LP/CLP systems. We describe PiLLoW, a publicdomain Internet and WWW programming library for LP/CLP systems that we have designed in order to simplify the process of writing such applications. PiLLoW provides facilities for accessing documents and code on the WWW; parsing, manipulating and generating HTML and XML structured documents and data; producing HTML forms; writing form handlers and CGI-scripts; and processing HTML/XML templates. An important contribution of PÍ'LLOW is to model HTML/XML code (and, thus, the content of WWW pages) as terms. The PÍ'LLOW library has been developed in the context of the Ciao Prolog system, but it has been adapted to a number of popular LP/CLP systems, supporting most of its functionality. We also describe the use of concurrency and a highlevel model of client-server interaction, Ciao Prolog's active modules, in the context of WWW programming. We propose a solution for client-side downloading and execution of Prolog code, using generic browsers. Finally, we also provide an overview of related work on the topic.

Parallelism and implementation of logic and constraint logic programming

CIAO is an advanced programming environment supporting Logic and Constraint programming. It offers a simple concurrent kernel on top of which declarative and non-declarative extensions are added via librarles. Librarles are available for supporting the ISOProlog standard, several constraint domains, functional and higher order programming, concurrent and distributed programming, internet programming, and others. The source language allows declaring properties of predicates via assertions, including types and modes. Such properties are checked at compile-time or at run-time. The compiler and system architecture are designed to natively support modular global analysis, with the two objectives of proving properties in assertions and performing program optimizations, including transparently exploiting parallelism in programs. The purpose of this paper is to report on recent progress made in the context of the CIAO system, with special emphasis on the capabilities of the compiler, the techniques used for supporting such capabilities, and the results in the áreas of program analysis and transformation already obtained with the system.

The role of computational logic as a hinge paradigm among deduction, problem solving, programming, and parallelism

This paper presents some brief considerations on the role of Computational Logic in the construction of Artificial Intelligence systems and in programming in general. It does not address how the many problems in AI can be solved but, rather more modestly, tries to point out some advantages of Computational Logic as a tool for the AI scientist in his quest. It addresses the interaction between declarative and procedural views of programs (deduction and action), the impact of the intrinsic limitations of logic, the relationship with other apparently competing computational paradigms, and finally discusses implementation-related issues, such as the efficiency of current implementations and their capability for efficiently exploiting existing and future sequential and parallel hardware. The purpose of the discussion is in no way to present Computational Logic as the unique overall vehicle for the development of intelligent systems (in the firm belief that such a panacea is yet to be found) but rather to stress its strengths in providing reasonable solutions to several aspects of the task.

WWW Programming using computational logic systems (and the PiLLoW/Ciao library)

We discuss from a practical point of view a number of issues involved in writing Internet and WWW applications using LP/CLP systems. We describe Pd_l_oW, a public-domain Internet and WWW programming library for LP/CLP systems which we argüe significantly simplifies the process of writing such applications. Pd_l_oW provides facilities for generating HTML structured documents, producing HTML forms, writing form handlers, accessing and parsing WWW documents, and accessing code posted at HTTP addresses. We also describe the architecture of some application classes, using a high-level model of client-server interaction, active modules. We then propose an architecture for automatic LP/CLP code downloading for local execution, using generic browsers. Finally, we also provide an overview of related work on the topic. The PiLLoW library has been developed in the context of the &- Prolog and CIAO systems, but it has been adapted to a number of popular LP/CLP systems, supporting most of its functionality.

A Language for Compositional Programming: A Rationale and Design

Бойко Бл. Банчев - Представена е обосновка и описание на език за програмиране в композиционен стил за опитни и учебни цели. Под “композиционен” имаме предвид функционален стил на програмиране, при който пресмятането е йерархия от композиции и прилагания на функции. Един от данновите типове на езика е този на геометричните фигури, които могат да бъдат получавани чрез прости правила за съотнасяне и така също образуват йерархични композиции. Езикът е силно повлиян от GeomLab, но по редица свойства се различава от него значително. Статията разглежда основните черти на езика; подробното му описание и фигурноконструктивните му възможности ще бъдат представени в съпътстваща публикация.