Effect of different tannery sludge compost amendment rates on growth, biomass accumulation and yield responses of Capsicum plants

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

O uso da serragem no processo de minicompostagem

In this work used four cylindrical PVC (polyvinyl chloride) mini compost bins, they all had the same size and were identical, with 40 cm diameter and 75 cm length, they also were opened on both sides. Each mini compost bean received 35,5 kg of solid organic wastes, which were previously crushed and 6 kg of sawdust. It was evaluated during the composting process the C/N analyses, temperature measurement, humidity and pH. Results showed that the use of sawdust as a source of high carbon inputs on the mini compost beans and using low quantities of organic solid wastes reached temperatures as high as 65° C, keeping on the thermophilic phase for almost 6 days. After 18 days the environmental temperature was reached, the organic wastes were then laid to reach full maturity for 55 more days. The C/N ratio was initially around 30/1 and after 73 days it was around 12/1.

Characterization of a glucose- and solvent-tolerant extracellular tannase from Aspergillus phoenicis

Tannases have attracted wider attention because of their biotechnological potential, especially enzymes from filamentous fungi and other microorganisms. However, the biodiversity of these microorganisms has been poorly explored, and few strains were identified for tannase production and characterization. This article describes the production, purification and characterization of a glucose- and solvent-tolerant extracellular tannase from Aspergillus phoenicis. High enzymatic levels were obtained in Khanna medium containing tannic acid up to 72 h at 30 °C under 100 rpm. The purified enzyme with 65% of carbohydrate content had an apparent native molecular mass of 218 kDa with subunits of 120 kDa and 93 kDa and was stable at 50 °C for 1 h. Optima of temperature and pH were 60 °C and 5.0-6.5, respectively. The enzyme was not affected significantly by most ions, detergents and organic solvents. While glucose did not affect the tannase activity, the addition of a high concentration of gallic acid did. The Km values were 1.7 mM (tannic acid), 14.3 mM (methyl-gallate) and 0.6 mM (propyl-gallate). The enzyme was able to catalyze the transesterification reaction to produce propyl-gallate. All biochemical properties suggest the biotechnological potential of the glucose- and solvent-tolerant tannase from A. phoenicis. © 2012 Elsevier B.V. All rights reserved.

Clastogenicity of landfarming soil treated with sugar cane vinasse

The addition of nutrients and/or soil bulking agents is used in bioremediation to increase microbial activity in contaminated soils. For this purpose, some studies have assessed the effectiveness of vinasse in the bioremediation of soils contaminated with petroleum waste. The present study was aimed at investigating the clastogenic/aneugenic potential of landfarming soil from a petroleum refinery before and after addition of sugar cane vinasse using the Allium cepa bioassay. Our results show that the addition of sugar cane vinasse to landfarming soil potentiates the clastogenic effects of the latter probably due the release of metals that were previously adsorbed into the organic matter. These metals may have interacted synergistically with petroleum hydrocarbons present in the landfarming soil treated with sugar cane vinasse. We recommend further tests to monitor the effects of sugar cane vinasse on soils contaminated with organic wastes. © 2012 Springer Science+Business Media B.V.

Atributos físicos de um Latossolo Vermelho distrófico degradado em resposta à aplicação de biossólidos

Sewage sludge, waste with high organic matter content and rapid decomposition, combined with sawdust, rich in carbon and slow decomposition, are suitable components for the study of degraded areas. In order to test the interactions of these residues in the recovery of a degraded soil in Selvíria - MS, four doses of sewage sludge (0, 8, 16 and 24 t ha -1, dry basis ) and four doses of sawdust particles (0, 8, 16 and 24 t ha-1, dry basis ) were tested in February 2009, in a completely randomized block design (4 × 4 + 1 factorial), with four replications. As indicators of the effects, the penetration resistance, gravimetric moisture and soil bulk density (0-0.10, 0.10-0.20; 0.20-0.40 m) were used. Significant effects were observed for the factors (sewage sludge and sawdust) and control treatment for penetration resistance in the soil depths studied, for gravimetric moisture in the intermediate layer and for the soil density in the surface and intermediate layers. Considering the type of soil and the short period of study (24 months), the use of organic wastes presented improvement in physical properties of soil in relation to control. However, it is necessary to study them for a longer period.

Aplicación de un subproducto del procesamiento de guayaba en un Ultisol, en presencia y en ausencia de fertilización mineral

There is a relative lack of technical studies on the adequate management of organic wastes from food processing. The aim of this study was to evaluate the effect of applying doses of a byproduct from guava processing, in the presence and absence of mineral fertilization, on the fertility of a an Ultisol (or Red-Yellow Argisol) under laboratory conditions. An entirely randomized 5x2 factorial experimental design was used with five byproduct doses, in the presence and absence of mineral fertilization, with four repetitions, for a total of 40 experimental units. Under the experimental conditions, the attributes pH, OM, K, Mg, BS, T, V, B, Fe, Zn and S-SO42- were affected by the guava byproduct doses, as well as by the presence or absence of mineral fertilization. With the use of this fertilization, the variables OM, K, H+Al, T, Fe and Zn increased more as a function of byproduct dose than in the absence of fertilization. The results obtained demonstrate the potential of using this waste material in the cycling and supply of nutrients.

Atributos químicos em solos tratados com lodo biológico de indústria de gelatina

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Uso do lodo biológico de indústria de gelatina para adubação de cana-de-açúcar

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Características minerais e energéticas do lixo urbano em processos de compostagem e biodigestão anaeróbia

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Programação linear inteira aplicada ao aproveitamento do palhiço da cana-de-açúcar

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Co-digestão anaeróbia de dejetos de bovinos e dois tipos de glicerina bruta

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Análise da viabilidade da reciclagem de dejetos de bovinos com tratamento biológico, em sistema intensivo de produção de leite

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Otimização de rotas tecnológicas de processamento e distribuição de resíduos municipais

Pós-graduação em Engenharia Mecânica - FEG

Atributos da solução e do solo de cerrado após aplicação de resíduo da extração de celulose

Pós-graduação em Agronomia - FEIS

Tratamento orgânico de resíduos de rúmen bovino

The organic wastes need to be adequately managed, in order to avoid the environmental pollution and damage to the public health. So, this work aimed to study the composting process using two methods: manual and mechanized, for the treatment of bovine ruminal waste. This residue is generated in large proportions during the bovine slaughter process, and it can lead environmental degradation and contamination, or even damage to the public health, when not treated. For the initial adjustment of the composting parameters, it was incorporated the residue of coffee husks. The manual composting system was done by the manually aerated piles, while the mechanized composting system was done in a reactor coupled to a compressor that enabled the aeration of the system. The proportions used in both systems were: 90% bovine rumen (R) and 10% coffe husks (CC); 85% bovine rumen and 15% coffe husks; 80% bovine rumen and 20% coffe husks. The parameters determined during the monitoring of the composting process were: temperature, pH, moisture, organic matter, ash, organic carbon, Kjeldahl nitrogen and C/N ratio. The results obtained during the monitoring of the piles and reactors presented similar behavior, except for the parameters Kjeldahl nitrogen and C/N ratio. When compared to the “Instrução Normativa no 25 de 23/07/2009 do Ministério da Agricultura, Pecuária e Abastecimento”, the organic produced composts with the best results were: pile 2 (85% R; 15% CC) and reactors 1 (90% R; 10% CC) e 2 (85% R; 15% CC)