Environmental Risks : Should Banks Be Liable?

This paper studies the impact of banks' liability for environmental damages caused by their borrowers. Laws or court decisions that declare banks liable for environmental damages have two objectives : (1) finding someone to pay for the damages and (2) exerting a pressure on a firm's stakeholders to incite them to invest in environmental risk prevention. We study the effect that such legal decisions can have on financing relationships and especially on the incentives to reduce environmental risk in an environment where banks cannot commit to refinance the firm in all circumstances. Following an environmental accident, liable banks more readily agree to refinance the firm. We then show that bank liability effectively makes refinancing more attractive to banks, therefore improving the firm's risk-sharing possibilities. Consequently, the firm's incentives to invest in environmental risk reduction are weakened compared to the (bank) no-liability case. We also show that, when banks are liable, the firm invests at the full-commitment optimal level of risk reduction investment. If there are some externalities such that some damages cannot be accounted for, the socially efficient level of investment is greater than the privately optimal one. in that case, making banks non-liable can be socially desirable.

Environmental Risk: Should Banks Be Liable?

This paper studies the impact of banks' liability for environmental damages caused by their borrowers. Laws or court decisions that declare banks liable for environmental damages have two objectives : (1) finding someone to pay for the damages and (2) exerting a pressure on a firm's stakeholders to incite them to invest in environmental risk prevention. We study the effect that such legal decisions can have on financing relationships and especially on the incentives to reduce environmental risk in an environment where banks cannot commit to refinance the firm in all circumstances. Following an environmental accident, liable banks more readily agree to refinance the firm. We then show that bank liability effectively makes refinancing more attractive to banks, therefore improving the firm's risk-sharing possibilities. Consequently, the firm's incentives to invest in environmental risk reduction are weakened compared to the (bank) no-liability case. We also show that, when banks are liable, the firm invests at the full-commitment optimal level of risk reduction investment. If there are some externalities such that some damages cannot be accounted for, the socially efficient level of investment is greater than the privately optimal one. in that case, making banks non-liable can be socially desirable.

The Macroeconomic Effects of Infrequent Information with Adjustment Costs

In the last decade, the potential macroeconomic effects of intermittent large adjustments in microeconomic decision variables such as prices, investment, consumption of durables or employment – a behavior which may be justified by the presence of kinked adjustment costs – have been studied in models where economic agents continuously observe the optimal level of their decision variable. In this paper, we develop a simple model which introduces infrequent information in a kinked adjustment cost model by assuming that agents do not observe continuously the frictionless optimal level of the control variable. Periodic releases of macroeconomic statistics or dividend announcements are examples of such infrequent information arrivals. We first solve for the optimal individual decision rule, that is found to be both state and time dependent. We then develop an aggregation framework to study the macroeconomic implications of such optimal individual decision rules. Our model has the distinct characteristic that a vast number of agents tend to act together, and more so when uncertainty is large. The average effect of an aggregate shock is inversely related to its size and to aggregate uncertainty. We show that these results differ substantially from the ones obtained with full information adjustment cost models.

How Much Inflation is Necessary to Grease the Wheels?

This paper studies Tobin's proposition that inflation "greases" the wheels of the labor market. The analysis is carried out using a simple dynamic stochastic general equilibrium model with asymmetric wage adjustment costs. Optimal inflation is determined by a benevolent government that maximizes the households' welfare. The Simulated Method of Moments is used to estimate the nonlinear model based on its second-order approximation. Econometric results indicate that nominal wages are downwardly rigid and that the optimal level of grease inflation for the U.S. economy is about 1.2 percent per year, with a 95% confidence interval ranging from 0.2 to 1.6 percent.

Développement d’un système d’administration de l’anesthésie en boucle fermée

En salle d’opération, les tâches de l’anesthésiste sont nombreuses. Alors que l’utilisation de nouveaux outils technologiques l’informe plus fidèlement sur ce qui se passe pour son patient, ces outils font que ses tâches deviennent plus exigeantes. En vue de diminuer cette charge de travail, nous avons considérer l’administration automatique d’agents anesthésiques en se servant de contrôle en boucle fermée. À cette fin, nous avons développé un système d’administration d’un agent anesthésique (le propofol) visant à maintenir à un niveau optimal la perte de conscience du patient pendant toute la durée d’une chirurgie. Le système comprend un ordinateur, un moniteur d’anesthésie et une pompe de perfusion. L’ordinateur est doté d’un algorithme de contrôle qui, à partir d’un indice (Bispectral IndexTM ou BIS) fournit par le moniteur d’anesthésie détermine le taux d’infusion de l’agent anesthésiant. Au départ, l’anesthésiste choisit une valeur cible pour la variable de contrôle BIS et l’algorithme, basé sur système expert, calcule les doses de perfusion de propofol de sorte que la valeur mesurée de BIS se rapproche le plus possible de la valeur cible établie. Comme interface-utilisateur pour un nouveau moniteur d’anesthésie, quatre sortes d’affichage ont été considérés: purement numérique, purement graphique, un mélange entre graphique et numérique et un affichage graphique intégré (soit bidimensionnel). À partir de 20 scenarios différents où des paramètres normaux et anormaux en anesthésie étaient présentés à des anesthésistes et des résidents, l’étude des temps de réaction, de l’exactitude des réponses et de la convivialité (évaluée par le NASA-TLX) a montré qu’un affichage qui combine des éléments graphiques et numériques était le meilleur choix comme interface du système. Une étude clinique a été réalisée pour comparer le comportement du système d’administration de propofol en boucle fermée comparativement à une anesthésie contrôlée de façon manuelle et conventionnelle où le BIS était aussi utilisé. Suite à l’approbation du comité d’éthique et le consentement de personnes ayant à subir des chirurgies générales et orthopédiques, 40 patients ont été distribués également et aléatoirement soit dans le Groupe contrôle, soit dans le Groupe boucle fermée. Après l’induction manuelle de propofol (1.5 mg/kg), le contrôle en boucle fermée a été déclenché pour maintenir l’anesthésie à une cible de BIS fixée à 45. Dans l’autre groupe, le propofol a été administré à l’aide d’une pompe de perfusion et l’anesthésiste avait aussi à garder manuellement l’indice BIS le plus proche possible de 45. En fonction du BIS mesuré, la performance du contrôle exercé a été définie comme excellente pendant les moments où la valeur du BIS mesurée se situait à ±10% de la valeur cible, bonne si comprise de ±10% à ±20%, faible si comprise de ±20% à ±30% ou inadéquate lorsque >±30%. Dans le Groupe boucle fermée, le système a montré un contrôle excellent durant 55% du temps total de l’intervention, un bon contrôle durant 29% du temps et faible que pendant 9% du temps. Le temps depuis l’arrêt de la perfusion jusqu’à l’extubation est de 9 ± 3.7 min. Dans le Groupe contrôle, un contrôle excellent, bon, et faible a été enregistré durant 33%, 33% et 15% du temps respectivement et les doses ont été changées manuellement par l’anesthésiste en moyenne 9.5±4 fois par h. L’extubation a été accomplie après 11.9 ± 3.3 min de l’arrêt de la perfusion. Dans le Groupe boucle fermée, un contrôle excellent a été obtenu plus longtemps au cours des interventions (P<0.0001) et un contrôle inadéquat moins longtemps (P=0.001) que dans le Groupe contrôle. Le système en boucle fermée d’administration de propofol permet donc de maintenir plus facilement l’anesthésie au voisinage d’une cible choisie que l’administration manuelle.

L’étude des déterminants et des effets de la formation au sein des entreprises canadiennes : au-delà de la productivité

Les milieux de travail canadiens présentent des visages diversifiés et en pleine mutation. En raison de facteurs tels que les nouvelles technologies, la mondialisation, l’économie du savoir ou encore l’évolution démographique, la transformation des entreprises canadiennes passe par une main-d’œuvre qualifiée, adaptable et de qualité. Notre recherche s’inscrit dans le cadre des études s’intéressant aux comportements des entreprises en matière d’investissement en capital humain au Canada. Nous avons retenu un cadre théorique qui est constitué principalement de la théorie du capital humain, de celle des ressources internes et de l’approche des coûts et des bénéfices. Pour les fins de notre recherche, nous retenons une approche quantitative longitudinale, en utilisant des données secondaires issues du questionnaire des employeurs de l’Enquête sur le milieu de travail et les employés pour les années 1999 à 2005 inclusivement. La nature longitudinale de l’EMTE permet de corriger pour les biais liés à l’hétérogénéité non observée des firmes et à l’endogénéité possible de la variable de formation. Notre étude se divise globalement en trois articles. Dans les deux premiers cas, les dépenses en formation sont considérées comme une variable explicative de la productivité et du taux de roulement des employés. Dans le troisième cas, les dépenses de formation constituent la variable dépendante à l’étude. Le premier article examine l’effet des investissements en formation sur la productivité des entreprises canadiennes. La littérature scientifique traitant de l’impact de la formation sur la performance des entreprises continue de s’accroître dû aux nouvelles techniques d’estimations, à la disponibilité des données, et à l’intérêt grandissant pour le capital humain. Les résultats partiels des études antérieures montrent la possibilité que les retours des investissements réalisés en formation puissent avoir des effets au-delà de l’année courante. Sur le plan théorique, cette hypothèse a du sens, mais au niveau empirique il semble que les liens formels entre la formation et la productivité des entreprises ne sont pas clairement identifiés. Nos résultats montrent que les investissements en formation réalisés avec trois années de retard engendrent des effets positifs et significatifs sur la productivité à court et à moyen termes. L’interaction entre les différents types d’investissements permet de vérifier l’hypothèse à l’effet que les investissements en capital physique et en capital humain soient complémentaires et se supportent mutuellement. Après avoir procédé à l’estimation de l’effet des dépenses en formation structurée sur la productivité des entreprises, nous nous demandons pour quelles raisons les employeurs demeurent réticents quant aux retours des investissements en formation ? Dans le cadre de cette seconde réflexion, nous nous intéressons à deux dimensions de l’estimation du roulement, à savoir le roulement de nature volontaire et une mesure de l’optimum. Les résultats obtenus quant à l’effet des dépenses en formation structurée par employé sur les taux de roulement volontaire et optimal montrent que la relation est positive dans les deux cas. Cet article vise également à vérifier si différents outils organisationnels associés aux relations industrielles peuvent avoir un effet sur la réduction du taux de roulement volontaire des employés. Nos résultats montrent aussi que la présence syndicale et la perception d’un bon climat de travail traduisent dans un sens, un environnement dans lequel l’employeur et les employés ont des intérêts communs pour la poursuite de mêmes objectifs. Dans le cadre du troisième article, nous examinons certains déterminants des investissements en formation structurée au sein des milieux de travail. Nos résultats montrent qu’une entreprise de grande taille, qui investit davantage en capital physique par employé par rapport à la moyenne, au sein de laquelle un grand pourcentage de travailleurs utilisent un ordinateur, où il y a une proportion élevée de nouvelles embauches et pour laquelle l’employeur introduit un système cohérent de pratiques dépense davantage en formation structurée qu’une entreprise qui ne possède pas ces caractéristiques, toutes choses égales par ailleurs. Ces résultats permettent de discuter également de la complémentarité des facteurs faisant partie d’un cercle vertueux de croissance des entreprises pouvant déterminer les investissements en formation.

Partial decentralization as a safeguard against favoritism

In this paper I investigate the optimal level of decentralization of tasks for the provision of a local public good. I enrich the well-known trade-off between internalization of spillovers (that favors centralization) and accountability (that favors decentralization) by considering that public goods are produced through multiple tasks. This adds an additional institutional setting, partial decentralization, to the classical choice between full decentralization and full centralization. The main results are that partial decentralization is optimal when both the variance of exogenous shocks to electorate’s utility is large and the electorate expects high performance from politicians. I also show that the optimal institutional setting depends on the degree of substitutability / complementarity between tasks. In particular, I show that a large degree of substitutability between tasks makes favoritism more likely, which increases the desirability of partial decentralization as a safeguard against favoritism.

Modelling habitat selection and distribution of the critically endangered Jerdon's courser Rhinoptilus bitorquatus in scrub jungle: an application of a new tracking method

1. Jerdon's courser Rhinoptilus bitorquatus is a nocturnally active cursorial bird that is only known to occur in a small area of scrub jungle in Andhra Pradesh, India, and is listed as critically endangered by the IUCN. Information on its habitat requirements is needed urgently to underpin conservation measures. We quantified the habitat features that correlated with the use of different areas of scrub jungle by Jerdon's coursers, and developed a model to map potentially suitable habitat over large areas from satellite imagery and facilitate the design of surveys of Jerdon's courser distribution. 2. We used 11 arrays of 5-m long tracking strips consisting of smoothed fine soil to detect the footprints of Jerdon's coursers, and measured tracking rates (tracking events per strip night). We counted the number of bushes and trees, and described other attributes of vegetation and substrate in a 10-m square plot centred on each strip. We obtained reflectance data from Landsat 7 satellite imagery for the pixel within which each strip lay. 3. We used logistic regression models to describe the relationship between tracking rate by Jerdon's coursers and characteristics of the habitat around the strips, using ground-based survey data and satellite imagery. 4. Jerdon's coursers were most likely to occur where the density of large (>2 m tall) bushes was in the range 300-700 ha(-1) and where the density of smaller bushes was less than 1000 ha(-1). This habitat was detectable using satellite imagery. 5. Synthesis and applications. The occurrence of Jerdon's courser is strongly correlated with the density of bushes and trees, and is in turn affected by grazing with domestic livestock, woodcutting and mechanical clearance of bushes to create pasture, orchards and farmland. It is likely that there is an optimal level of grazing and woodcutting that would maintain or create suitable conditions for the species. Knowledge of the species' distribution is incomplete and there is considerable pressure from human use of apparently suitable habitats. Hence, distribution mapping is a high conservation priority. A two-step procedure is proposed, involving the use of ground surveys of bush density to calibrate satellite image-based mapping of potential habitat. These maps could then be used to select priority areas for Jerdon's courser surveys. The use of tracking strips to study habitat selection and distribution has potential in studies of other scarce and secretive species.

Modelling habitat selection and distribution of the critically endangered Jerdon's courser Rhinoptilus bitorquatus in scrub jungle: an application of a new tracking method

1. Jerdon's courser Rhinoptilus bitorquatus is a nocturnally active cursorial bird that is only known to occur in a small area of scrub jungle in Andhra Pradesh, India, and is listed as critically endangered by the IUCN. Information on its habitat requirements is needed urgently to underpin conservation measures. We quantified the habitat features that correlated with the use of different areas of scrub jungle by Jerdon's coursers, and developed a model to map potentially suitable habitat over large areas from satellite imagery and facilitate the design of surveys of Jerdon's courser distribution. 2. We used 11 arrays of 5-m long tracking strips consisting of smoothed fine soil to detect the footprints of Jerdon's coursers, and measured tracking rates (tracking events per strip night). We counted the number of bushes and trees, and described other attributes of vegetation and substrate in a 10-m square plot centred on each strip. We obtained reflectance data from Landsat 7 satellite imagery for the pixel within which each strip lay. 3. We used logistic regression models to describe the relationship between tracking rate by Jerdon's coursers and characteristics of the habitat around the strips, using ground-based survey data and satellite imagery. 4. Jerdon's coursers were most likely to occur where the density of large (>2 m tall) bushes was in the range 300-700 ha(-1) and where the density of smaller bushes was less than 1000 ha(-1). This habitat was detectable using satellite imagery. 5. Synthesis and applications. The occurrence of Jerdon's courser is strongly correlated with the density of bushes and trees, and is in turn affected by grazing with domestic livestock, woodcutting and mechanical clearance of bushes to create pasture, orchards and farmland. It is likely that there is an optimal level of grazing and woodcutting that would maintain or create suitable conditions for the species. Knowledge of the species' distribution is incomplete and there is considerable pressure from human use of apparently suitable habitats. Hence, distribution mapping is a high conservation priority. A two-step procedure is proposed, involving the use of ground surveys of bush density to calibrate satellite image-based mapping of potential habitat. These maps could then be used to select priority areas for Jerdon's courser surveys. The use of tracking strips to study habitat selection and distribution has potential in studies of other scarce and secretive species.

When do export subsidies have a redistributional role?

If an export subsidy is efficient, that is, has a surplus-transfer role, then there exists an implicit function relating the optimal level of the subsidy to the income target in the agricultural sector. If an export subsidy is inefficient no such function exists. We show that dependence exists in large-export equilibrium, not in small-export equilibrium and show that these results remain robust to concerns about domestic tax distortions. The failure of previous work to produce this result stems from its neglect of the income constraint on producer surplus in the programming problem transferring surplusfrom consumersand taxpayers to farmers.

Excise taxes and commodity promotion bayesian retrieval of the optimum

This article shows how the solution to the promotion problem—the problem of locating the optimal level of advertising in a downstream market—can be derived simply, empirically, and robustly through the application of some simple calculus and Bayesian econometrics. We derive the complete distribution of the level of promotion that maximizes producer surplus and generate recommendations about patterns as well as levels of expenditure that increase net returns. The theory and methods are applied to quarterly series (1978:2S1988:4) on red meats promotion by the Australian Meat and Live-Stock Corporation. A slightly different pattern of expenditure would have profited lamb producers

Representing the acquisition and use of energy by individuals in agent-based models of animal populations

Summary 1. Agent-based models (ABMs) are widely used to predict how populations respond to changing environments. As the availability of food varies in space and time, individuals should have their own energy budgets, but there is no consensus as to how these should be modelled. Here, we use knowledge of physiological ecology to identify major issues confronting the modeller and to make recommendations about how energy budgets for use in ABMs should be constructed. 2. Our proposal is that modelled animals forage as necessary to supply their energy needs for maintenance, growth and reproduction. If there is sufficient energy intake, an animal allocates the energy obtained in the order: maintenance, growth, reproduction, energy storage, until its energy stores reach an optimal level. If there is a shortfall, the priorities for maintenance and growth/reproduction remain the same until reserves fall to a critical threshold below which all are allocated to maintenance. Rates of ingestion and allocation depend on body mass and temperature. We make suggestions for how each of these processes should be modelled mathematically. 3. Mortality rates vary with body mass and temperature according to known relationships, and these can be used to obtain estimates of background mortality rate. 4. If parameter values cannot be obtained directly, then values may provisionally be obtained by parameter borrowing, pattern-oriented modelling, artificial evolution or from allometric equations. 5. The development of ABMs incorporating individual energy budgets is essential for realistic modelling of populations affected by food availability. Such ABMs are already being used to guide conservation planning of nature reserves and shell fisheries, to assess environmental impacts of building proposals including wind farms and highways and to assess the effects on nontarget organisms of chemicals for the control of agricultural pests. Keywords: bioenergetics; energy budget; individual-based models; population dynamics.

Dopant-vacancy binding effects in Li-doped magnesium hydride

We use a combination of ab initio calculations and statistical mechanics to investigate the substitution of Li+ for Mg2+ in magnesium hydride (MgH2) accompanied by the formation of hydrogen vacancies with positive charge (with respect to the original ion at the site). We show that the binding energy between dopants and vacancy defects leads to a significant fraction of trapped vacancies and therefore a dramatic reduction in the number of free vacancies available for diffusion. The concentration of free vacancies initially increases with dopant concentration but reaches a maximum at around 1 mol % Li doping and slowly decreases with further doping. At the optimal level of doping, the corresponding concentration of free vacancies is much higher than the equilibrium concentrations of charged and neutral vacancies in pure MgH2 at typical hydrogen storage conditions. We also show that Li-doped MgH2 is thermodynamically metastable with respect to phase separation into pure magnesium and lithium hydrides at any significant Li concentration, even after considering the stabilization provided by dopant-vacancy interactions and configurational entropic effects. Our results suggest that lithium doping may enhance hydrogen diffusion hydride but only to a limited extent determined by an optimal dopant concentration and conditioned to the stability of the doped phase.

The social evolution of dispersal with public goods cooperation

Selection can favour the evolution of individually costly dispersal if this alleviates competition between relatives. However, conditions that favour altruistic dispersal also mediate selection for other social behaviours, such as public goods cooperation, which in turn is likely to mediate dispersal evolution. Here, we investigate – both experimentally (using bacteria) and theoretically – how social habitat heterogeneity (i.e. the distribution of public goods cooperators and cheats) affects the evolution of dispersal. In addition to recovering the well-known theoretical result that the optimal level of dispersal increases with genetic relatedness of patch mates, we find both mathematically and experimentally that dispersal is always favoured when average patch occupancy is low, but when average patch occupancy is high, the presence of public goods cheats greatly alters selection for dispersal. Specifically, when public goods cheats are localized to the home patch, higher dispersal rates are favoured, but when cheats are present throughout available patches, lower dispersal rates are favoured. These results highlight the importance of other social traits in driving dispersal evolution.

Thermodynamic and statistical analysis of soybean oil extraction process using renewable solvent

The main goal of this work was to evaluate thermodynamic parameters of the soybean oil extraction process using ethanol as solvent. The experimental treatments were as follows: aqueous solvents with water contents varying from 0 to 13% (mass basis) and extraction temperature varying from 50 to 100 degrees C. The distribution coefficients of oil at equilibrium have been used to calculate enthalpy, entropy and free energy changes. The results indicate that oil extraction process with ethanol is feasible and spontaneous, mainly under higher temperature. Also, the influence of water level in the solvent and temperature were analysed using the response surface methodology (RSM). It can be noted that the extraction yield was highly affected by both independent variables. A joint analysis of thermodynamic and RSM indicates the optimal level of solvent hydration and temperature to perform the extraction process.