Parque eólico Off-Shore en Barbate (Cádiz)

Este proyecto tiene como objeto la descripción de las obras e instalaciones necesarias para llevar a cabo la construcción del Parque Eólico Marino “Barbate Offshore”, en la provincia de Cádiz, y conseguir, de este modo, las metas propuestas por los planes energéticos comunitarios, nacionales y autonómicos en cuanto a la producción de energía eléctrica a partir de fuentes renovables. Se trata del primer parque eólico marino que se construye en España.

Modelling of chloride penetration into non-saturated concrete: Case study application for real marine off shore structures

The aim of this paper is to explain the chloride concentration profiles obtained experimentally from control samples of an offshore platform after 25 years of service life. The platform is located 12 km off the coast of the Brazilian province Rio Grande do Norte, in the north-east of Brazil. The samples were extracted at different orientations and heights above mean sea level. A simple model based on Fick’s second law is considered and compared with a finite element model which takes into account transport of chloride ions by diffusion and convection. Results show that convective flows significantly affect the studied chloride penetrations. The convection velocity is obtained by fitting the finite element solution to the experimental data and seems to be directly proportional to the height above mean sea level and also seems to depend on the orientation of the face of the platform. This work shows that considering solely diffusion as transport mechanism does not allow a good prediction of the chloride profiles. Accounting for capillary suction due to moisture gradients permits a better interpretation of the material’s behaviour.

Parque eólico Off-Shore en San Bartolomé de Tirajana

El objeto del Proyecto de Construcción del Parque Eólico Off-Shore de San Bartolomé de Tirajana, es el de definir de forma exacta y precisa los elementos de los que se compone el mismo, de forma que se aproveche, en la mayor medida posible, el recurso eólico para la producción de energía eléctrica

The palynology of carboniferous strata in Northumberland off-shore boreholes

The work described represents a palynological study of Carboniferous coal seams of Upper Westphallan. A and Westphalian B age from eight off-shore boreholes sunk by the National Coal Board in Northumberland. When treated chemically the majority of the coal samples yielded well-preserved miospores which were studied by means of the optical and scanning electron microscopes. Systematic descriptions of 151 miospore species belonging to 57 genera, and including 18 new types, are given. One miospore assemblage is recognised from the coals of Upper Westphalian A age and two fUrther assemblages from those of Westphalian B age, These compare with assemblages described by earlier workers from strata of similar age elsewhere, but there are differences in the distributions of some of the more abundant taxa, and some of the stratigraphically significant species are not present. Correlations based on miospore distributions between the coal seams encountered in the eight off-shore boreholes agree fairly closely with those established by the National Coal Board on lithological criteria. Relations are discussed between palynology and palaeoecology and detailed comparisons made with the work of Smith and Butterworth 1967 from the adjacent on-shore area. It is concluded that the miospore assemblages described are restricted in that they contain very low representation of Smith's (1962) Densospore phase. This restriction, due to the relatively rapid subsidence of the depositional area, is reflected in the distributions of some of the less common spores as · well as in the abundances of species such as Densosporites sphaerotriangularis, Lycospora pusilla and Apiculatisporis irregularis.

Adoption of catamaran fishing method for mukene (Rastrineobola argentea) in off shore waters of Lake Victoria

This report presents information on the development of a system for commercial harvesting of Rastrineobola argentea (Mukene) in Lake Victoria. The objective of this work is to develop a system for commercial Harvesting of Mukene with: •Targeted output above 1,000 kg per working night per boat. •Target area to be off shore waters of Lake Victoria. •Drying under hygienic conditions for production of high quality poultry and animal feeds. •Supply to be continuous with predicable prices

Investigation on water and sediment quality variation from coast to off shore and its relation to bent hoses biodiversity: case study Bandar tahery

This paper deals with the qualification of water and sediment particularly those of benthos, as well as their interaction results, through careful laboratory researches within 24 experimental sites around the bank of Bandar Taheri, Persian Gulf water of Iranian borders, under 13th phase south Pars project. Samples were carried to the laboratories and careful experimental tests such as physical chemical, heavy metal, nitrate ammoniac, toc and other biologic tests including various type of benthos count were performed. Data gained through Shanon and Dankan statistical analyses were also studied to determine the water, sediment and pollution rate. Resulted information would classify the area as less polluted area which is rather away from critical environmental zone, another word the area could be liable to change to an undesired one while the density rates of principal metals follows the Fe>Mn>Zn>Cu>Pb>Cd>N pattern.

The organic sea-surface microlayer in the upwelling region off the coast of Peru and potential implications for air-sea exchange processes

The sea-surface microlayer (SML) is at the upper- most surface of the ocean, linking the hydrosphere with the atmosphere. The presence and enrichment of organic compounds in the SML have been suggested to influence air- sea gas exchange processes as well as the emission of primary organic aerosols. Here, we report on organic matter components collected from an approximately 50µm thick SML and from the underlying water (ULW), ca. 20 cm below the SML, in December 2012 during the SOPRAN METEOR 91 cruise to the highly productive, coastal upwelling regime off the coast of Peru. Samples were collected at 37 stations including coastal upwelling sites and off-shore stations with less organic matter and were analyzed for total and dissolved high molecular weight (> 1 kDa) combined carbohydrates (TCCHO, DCCHO), free amino acids (FAA), total and dissolved hydrolyzable amino acids (THAA, DHAA), transparent exopolymer particles (TEP), Coomassie stainable particles (CSPs), total and dissolved organic carbon (TOC, DOC), total and dissolved nitrogen (TN, TDN), as well as bacterial and phytoplankton abundance. Our results showed a close coupling between organic matter concentrations in the water column and in the SML for almost all components except for FAA and DHAA that showed highest enrichment in the SML on average. Accumulation of gel particles (i.e., TEP and CSP) in the SML differed spatially. While CSP abundance in the SML was not related to wind speed, TEP abundance decreased with wind speed, leading to a depletion of TEP in the SML at about 5 m s-1 . Our study provides insight to the physical and biological control of organic matter enrichment in the SML, and discusses the potential role of organic matter in the SML for air-sea exchange processes.

GO423 - the second Game On / brIGDA Independant Game Symposium

GO423 was initiated in 2012 as part of a community effort to ensure the vitality of the Queensland Games Sector. In common with other industrialised nations, the game industry in Australia is a reasonably significant contributor to Gross National Product (GNP). Games are played in 92% of Australian homes and the average adult player has been playing them for at least twelve years with 26% playing for more than thirty years (Brand, 2011). Like the games and interactive entertainment industries in other countries, the Australian industry has its roots in the small team model of the 1980s. So, for example, Beam Software, which was established in Melbourne in 1980, was started by two people and Krome Studios was started in 1999 by three. Both these companies grew to employing over 100 people in their heydays (considered large by Antipodean standards), not by producing their own intellectual property (IP) but by content generation for off shore parent companies. Thus our bigger companies grew on a model of service provision and tended not to generate their own IP (Darchen, 2012). There are some no-table exceptions where IP has originated locally and been ac-quired by international companies but in the case of some of the works of which we are most proud, the Australian company took on the role of “Night Elf” – a convenience due to affordances of the time zone which allowed our companies to work while the parent companies slept in a different time zone. In the post GFC climate, the strong Australian dollar and the vulnerability of such service provision means that job security is virtually non-existent with employees invariably being on short-term contracts. These issues are exacerbated by the decline of middle-ground games (those which fall between the triple-A titles and the smaller games often produced for a casual audience). The response to this state of affairs has been the change in the Australian games industry to new recognition of its identity as a wider cultural sector and the rise (or return) of an increasing number of small independent game development companies. ’In-dies’ consist of small teams, often making games for mobile and casual platforms, that depend on producing at least one if not two games a year and who often explore more radical definitions of games as designed cultural objects. The need for innovation and creativity in the Australian context is seen as a vital aspect of the current changing scene where we see the emphasis on the large studio production model give way to an emerging cultural sector model where small independent teams are engaged in shorter design and production schedules driven by digital distribution. In terms of Quality of Life (QoL) this new digital distribution brings with it the danger of 'digital isolation' - a studio can work from home and deliver from home. Community events thus become increasingly important. The GO423 Symposium is a response to these perceived needs and the event is based on the understanding that our new small creative teams depend on the local community of practice in no small way. GO423 thus offers local industry participants the opportunity to talk to each other about their work, to talk to potential new members about their work and to show off their work in a small intimate situation, encouraging both feedback and support.

Experimental investigation on lateral impact response of concrete-filled double-skin tube columns using horizontal-impact-testing system

This paper presents an experimental investigation on the lateral impact performance of axially loaded concrete-filled double-skin tube (CFDST) columns. These columns have desirable structural and constructional properties and have been used as columns in building, legs of off shore platforms and as bridge piers. Since they could be vulnerable to impact from passing vessels or vehicles, it is necessary to understand their behaviour under lateral impact loads. With this in mind, an experimental method employing an innovative instrumented horizontal impact testing system (HITS) was developed to apply lateral impact loads whilst the column maintained a static axial pre-loading to examine the failure mechanism and key response parameters of the column. These included the time histories of impact force, reaction forces, global lateral deflection and permanent local buckling profile. Eight full scale columns were tested for key parameters including the axial load level and impact location. Based on the test data, the failure mode, peak impact force, impact duration, peak reaction forces, reaction force duration, column maximum and residual global deflections and column local buckling length, depth and width under varying conditions are analysed and discussed. It is evident that the innovative HITS can successfully test structural columns under the combination of axial pre-loading and impact loading. The findings on the lateral impact response of the CFDST columns can serve as a benchmark reference for their future analysis and design.

Identificação de danos estruturais utilizando técnicas de otimização.

Sistemas estruturais em suas variadas aplicações incluindo-se veículos espaciais, automóveis e estruturas de engenharia civil tais como prédios, pontes e plataformas off-shore, acumulam dano durante suas vidas úteis. Em muitas situações, tal dano pode não ser visualmente observado. Do ponto de vista da segurança e da performance da estrutura, é desejável monitorar esta possível ocorrência, localizá-la e quantificá-la. Métodos de identificação de sistemas, que em geral, são classificados numa categoria de Técnicas de Avaliação Não-Destrutivas, podem ser utilizados para esta finalidade. Usando dados experimentais tais como frequências naturais, modos de vibração e deslocamentos estáticos, e um modelo analítico estrutural, parâmetros da estrutura podem ser identificados. As propriedades estruturais do modelo analítico são modificadas de modo a minimizar a diferença entre os dados obtidos por aquele modelo e a resposta medida. Isto pode ser definido como um problema inverso onde os parâmetros da estrutura são identificados. O problema inverso, descrito acima, foi resolvido usando métodos globais de otimização devido à provável presença de inúmeros mínimos locais e a não convexidade do espaço de projeto. Neste trabalho o método da Evolução Diferencial (Differential Evolution, DE) foi utilizado como ferramenta principal de otimização. Trata-se de uma meta-heurística inspirada numa população de soluções sucessivamente atualizada por operações aritméticas como mutações, recombinações e critérios de seleção dos melhores indivíduos até que um critério de convergência seja alcançado. O método da Evolução Diferencial foi desenvolvido como uma heurística para minimizar funções não diferenciáveis e foi aplicado a estruturas planas de treliças com diferentes níveis de danos.

Potential use of offshore marine structures in rebuilding an overfished rockfish species, bocaccio (Sebastes paucispinis)

Although bocaccio (Sebastes paucispinis) was an economically important rockfish species along the west coast of North America, overfishing has reduced the stock to about 7.4% of its former unfished population. In 2003, using a manned research submersible, we conducted fish surveys around eight oil and gas platforms off southern California as part of an assessment of the potential value of these structures as fish habitat. From these surveys, we estimated that there was a minimum of 430,000 juvenile bocaccio at these eight structures. We determined this number to be about 20% of the average number of juvenile bocaccio that survive annually for the geographic range of the species. When these juveniles become adults, they will contribute about one percent (0.8%) of the additional amount of fish needed to rebuild the Pacific Coast population. By comparison, juvenile bocaccio recruitment to nearshore natural nursery grounds, as determined through regional scuba surveys, was low in the same year. This research demonstrates that a relatively small amount of artificial nursery habitat may be quite valuable in rebuilding an overfished species.

Studies on the seasonal cycle of sea surface temperatures, salinities, oxygen and phytoplankton in Koddiyar Bay, Trincomalee in relation to the shore seine fishery

In Sri Lanka waters, Durairatnam (1963, 1969) had reported on the seasonal variation of plankton at Puttalam lagoon, Dutch Bay, Portugal Bay and in the inshore and off shore waters off Colombo. Similar investigations were carried out at Koddiyar Bay especially in the estuarine waters where the three tributaries of the river Mahaveli empty their waters into the bay. The estuary is perennial. The fishes constituting the estuarine fisheries are mostly shallow water marine species which can tolerate considerable variations of salinities. Prawns and crabs also constitute a very valuable fishery in estuarine waters.

Um estudo de caso sobre servitização e nacionalização em um fabricante de hardware elétrico

A presente dissertação tem como principais características, a pesquisa, a análise e a proposição de um modelo de reflexão que considera os fatores mais relevantes na inclusão do processo de prestação de serviços em empresas de manufatura de bens, e em particular de empresas que buscam a nacionalização de sua capacidade de fornecimento. Dentro deste conceito de transição e incorporação de serviços, que é denominado pela literatura como “servitização”, e usando como objeto de pesquisa uma empresa fabricante de hardware elétrico, verificou-se como se deu o planejamento e execução da servitização para prestação de serviços técnicos off-shore, ligados à cadeia de suprimentos do segmento de Produção de Óleo e Gás no mar. Para auxiliar o entendimento sobre o posicionamento da empresa perante serviços, servitização e nacionalização, foi necessária a revisão bibliográfica sobre Requisitos de Conteúdo Local, Gestão de Operações em Serviços, Sistemas Produto-Serviço, Servitização, e Desenvolvimento de Projeto de Produtos e Serviços. A partir da análise de documentação disponibilizada pela empresa, e a comparação desta com a literatura academica revisada, verificou-se que os modelos propostos pela literatura não contém todos os elementos necessários para aplicação direta em negócios deste tipo. Com base nesta avaliação, verifica-se quais os fatores mais relevantes para a servitização e propõe-se um modelo para reflexão. Modelo este que preenche com elementos mais específicos as lacunas que influenciam negativamente na excelência operacional e na estratégia da corporação ligada a indústria de Petróleo e Gás Off-shore.

Influência da adição de cálcio nas propriedades de pastas geopoliméricas destinadas a cimentação de poços de petróleo

Nowadays, the search for new technologies that are able to follow the upcoming challenges in oil industry is a constant. Always trying properties improvements of the used materials, looking for the best performance and greater life time. Besides the search for technologies that show an improvement of performance, the search for materials environmentally correct along the whole production process. In Oil well cementing, this search for new technologies passes through the development of slurry systems that support these requests and that are also environmentally friendly. In this context, the use of geopolymer slurries is a great alternative route to cementing oil wells. Besides having good properties, comparable to Portland cement slurries, this alternative material releases much less CO2 gas in the production of their root materials when compared the production of Portland cement, which releases tons of CO2. In order to improve the properties of geopolymer slurries has been added Calcium Oxide, as observed in other studies that slurries where the Calcium is present the values of compressive strength is greater. The addition has been realized based in the CaO/SiO2 molar ratio of 0.05, 0.10 and 0.15. Have been performed compressive strength tests, thickening time, rheology and fliud loss control test of the slurries, following NBR 9831, as well as the physical chemical characterization of XRD, SEM and TG. Has been observed in most of the tests the slurries follow a tendency until the ratio of 0.10, which inverses in the ratio 0.15. This behavior can be explained by two phenomena that occur simultaneously, the first one is the break of the polymer chains and a consequent increase in molucules mobility, which prevails until the ratio of 0.1, and the second is possible approach of the chains due to the capacity of the calcium ions stabilize the charges of two different aluminum. There is only one linearity in the mechanical behavior that can be attributed to the appereance of the C-S-H phase. Based on this, it is concluded that the phenomenon of breaking the polymer chains predominates until the ratio of 0.1, causing an increase of the filtrate volume, lower rheological parameters and increasing thickening time. From the ratio of 0.15 the approach of the chains predominates, and the behavior is reversed