Phosphorylated DegU Manipulates Cell Fate Differentiation in the Bacillus subtilis Biofilm

Cell differentiation is ubiquitous and facilitates division of labor and development. Bacteria are capable of multicellular behaviors that benefit the bacterial community as a whole. A striking example of bacterial differentiation occurs throughout the formation of a biofilm. During Bacillus subtilis biofilm formation, a subpopulation of cells differentiates into a specialized population that synthesizes the exopolysaccharide and the TasA amyloid components of the extracellular matrix. The differentiation process is indirectly controlled by the transcription factor Spo0A that facilitates transcription of the eps and tapA (tasA) operons. DegU is a transcription factor involved in regulating biofilm formation. Here, using a combination of genetics and live single-cell cytological techniques, we define the mechanism of biofilm inhibition at high levels of phosphorylated DegU (DegU∼P) by showing that transcription from the eps and tapA promoter regions is inhibited. Data demonstrating that this is not a direct regulatory event are presented. We demonstrate that DegU∼P controls the frequency with which cells activate transcription from the operons needed for matrix biosynthesis in favor of an off state. Subsequent experimental analysis led us to conclude that DegU∼P functions to increase the level of Spo0A∼P, driving cell fate differentiation toward the terminal developmental process of sporulation.

Estudo e aplicação de amplificadores ópticos para suporte a redes banda larga

Esta tese tem como foco principal a análise dos principais tipos de amplificação óptica e algumas de suas aplicações em sistemas de comunicação óptica. Para cada uma das tecnologias abordadas, procurou-se definir o estado da arte bem como identificar as oportunidades de desenvolvimento científico relacionadas. Os amplificadores para os quais foi dirigido alguma atenção neste documento foram os amplificadores em fibra dopada com Érbio (EDFA), os amplificadores a semicondutor (SOA) e os amplificadores de Raman (RA). Este trabalho iniciou-se com o estudo e análise dos EDFA’s. Dado o interesse científico e económico que estes amplificadores têm merecido, apenas poucos nichos de investigação estão ainda em aberto. Dentro destes, focá-mo-nos na análise de diferentes perfis de fibra óptica dopada de forma a conseguir uma optimização do desempenho dessas fibras como sistemas de amplificação. Considerando a fase anterior do trabalho como uma base de modelização para sistemas de amplificação com base em fibra e dopantes, evoluiu-se para amplificadores dopados mas em guias de onda (EDWA). Este tipo de amplificador tenta reduzir o volume físico destes dispositivos, mantendo as suas características principais. Para se ter uma forma de comparação de desempenho deste tipo de amplificador com os amplificadores em fibra, foram desenvolvidos modelos de caixa preta (BBM) e os seus parâmetros afinados por forma a termos uma boa modelização e posterior uso deste tipo de amplificiadores em setups de simulação mais complexos. Depois de modelizados e compreendidos os processo em amplificadores dopados, e com vista a adquirir uma visão global comparativa, foi imperativo passar pelo estudo dos processos de amplificação paramétrica de Raman. Esse tipo de amplificação, sendo inerente, ocorre em todas as bandas de propagação em fibra e é bastante flexível. Estes amplificadores foram inicialmente modelizados, e algumas de suas aplicações em redes passivas de acesso foram estudadas. Em especial uma série de requisitos, como por exemplo, a gama de comprimentos de onda sobre os quais existem amplificação e os altos débitos de perdas de inserção, nos levaram à investigação de um processo de amplificação que se ajustasse a eles, especialmente para buscar maiores capacidades de amplificação (nomeadamente longos alcances – superiores a 100 km – e altas razões de divisão – 1:512). Outro processo investigado foi a possibilidade de flexibilização dos parâmetros de comprimento de onda de ganho sem ter que mudar as caractísticas da bomba e se possível, mantendo toda a referenciação no transmissor. Este processo baseou-se na técnica de clamping de ganho já bastante estudada, mas com algumas modificações importantes, nomeadamente a nível do esquema (reflexão apenas num dos extremos) e da modelização do processo. O processo resultante foi inovador pelo recurso a espalhamentos de Rayleigh e Raman e o uso de um reflector de apenas um dos lados para obtenção de laser. Este processo foi modelizado através das equações de propagação e optimizado, tendo sido demonstrado experimentalmente e validado para diferentes tipos de fibras. Nesta linha, e dada a versatilidade do modelo desenvolvido, foi apresentada uma aplicação mais avançada para este tipo de amplificadores. Fazendo uso da sua resposta ultra rápida, foi proposto e analisado um regenerador 2R e analisada por simulação a sua gama de aplicação tendo em vista a sua aplicação sistémica. A parte final deste trabalho concentrou-se nos amplificadores a semiconductor (SOA). Para este tipo de amplificador, os esforços foram postos mais a nível de aplicação do que a nível de sua modelização. As aplicações principais para estes amplificadores foram baseadas em clamping óptico do ganho, visando a combinação de funções lógicas essenciais para a concepção de um latch óptico com base em componentes discretos. Assim, com base num chip de ganho, foi obtido uma porta lógica NOT, a qual foi caracterizada e demonstrada experimentalmente. Esta foi ainda introduzida num esquema de latching de forma a produzir um bi-estável totalmente óptico, o qual também foi demonstrado e caracterizado. Este trabalho é finalizado com uma conclusão geral relatando os subsistemas de amplificação e suas aplicacações.

Body Mass Index and Neighborhood Socioeconomic Status in Washington State

Thesis (Master's)--University of Washington, 2015-12

Spiral drawing during self-rated dyskinesia is more impaired than during self-rated off

Background: A mobile device test battery, consisting of a patient diary collection section with disease-related questions and a fine motor test section (including spiral drawing tasks), was used by 65 patients with advanced Parkinson's disease (PD)(treated with intraduodenal levodopa/carbidopa gel infusion, Duodopa®, or candidates for this treatment) on 10439 test occasions in their home environments. On each occasion, patients traced three pre-drawn Archimedes spirals using an ergonomic stylus and self-assessed their motor function on a global Treatment Response Scale (TRS) ranging from -3 = very 'off' to 0 = 'on' to +3 = very dyskinetic. The spirals were processed by a computer-based method that generates a "spiral score" representing the PD-related drawing impairment. The scale for the score was based on a modified Bain & Findley rating scale in the range from 0 = no impairment to 5 = moderate impairment to 10 = extremely severe impairment. Objective: To analyze the test battery data for the purpose to find differences in spiral drawing performance of PD patients in relation to their self-assessments of motor function. Methods: Three motor states were used in the analysis; OFF state (including moderate and very 'off'), ON state ('on') and a dyskinetic (DYS) state (moderate and very dyskinetic). In order to avoid the problem of multiple test occasions per patient, 200 random samples of single test occasions per patient were drawn. One-way analysis of variance, ANOVA, test followed by Tukey multiple comparisons test was used to test if mean values of spiral test parameters, i.e. the spiral score and drawing completion times (in seconds), were different among the three motor states. Statistical significance was set at p<0.05. To investigate changes in the spiral score over the time-of-day test sessions for the three motor states, plots of statistical summaries were inspected. Results: The mean spiral score differed significantly across the three self-assessed motor states (p<0.001, ANOVA test). Tukey post-hoc comparisons indicate that the mean spiral score (mean ± SD; [95% CI for mean]) in DYS state (5.2 ± 1.8; [5.12, 5.28]) was higher than the mean spiral score in OFF (4.3 ± 1.7; [4.22, 4.37]) and ON (4.2 ± 1.7; [4.17, 4.29]) states. The mean spiral score was also significantly different among individual TRS values of slightly 'off' (4.02 ± 1.63), 'on' (4.07 ± 1.65) and slightly dyskinetic (4.6 ± 1.71), (p<0.001). There were no differences in drawing completion times among the three motor states (p=0.509). In the OFF and ON states, patients drew slightly more impaired spirals in the afternoon whereas in the DYS state the spiral drawing performance was more impaired in the morning. Conclusion: It was found that when patients considered themselves as being dyskinetic spiral drawing was more impaired (nearly one unit change in a 0-10 scale) compared to when they considered themselves as being 'off' and 'on'. The spiral drawing at patients that self-assessed their motor state as dyskinetic was slightly more impaired in the morning hours, between 8 and 12 o'clock, a situation possibly caused by the morning dose effect.

Does the burden of the experience sampling method undermine data quality in state based body image research?

Despite growing popularity of experience sampling methodology (ESM) for evaluations of state-based components of body image, there have been concerns that the frequent repeated measurement might encourage problematic responding resulting in low data quantity and/or quality. Using a sample of 105 women (mean age = 24.84), this study used multilevel modelling to investigate whether (a) there were changes in compliance or response variability across a 7-day period, and (b) whether such changes are explained by participant characteristics. Present findings suggest that demands of ESM protocol undermine quantity more so than quality of obtained data. Decline in procedural compliance across the testing period correlated with BMI and body shame, whereas reduced variability in state-based assessments did not adversely impact the strength of association between state body satisfaction ratings and other variables in the dataset. The authors make several recommendations for ensuring the quality of ESM-based data in future studies.

Kinetics of interface state-limited hole injection in alpha-naphthylphenylbiphenyl diamine (alpha-NPD) thin layers

Injection-limited operation is identified in thin-film, alpha-NPD-based diodes. A detailed model for the impedance of the injection process is provided which considers the kinetics of filling/releasing of interface states as the key factor behind the injection mechanism. The injection model is able to simultaneously account for the steady-state, current-voltage (J-V) characteristics and impedance response. and is based on the sequential injection of holes mediated by energetically distributed surface states at the metal-organic interface. The model takes into account the vacuum level offset caused by the interface dipole, along with the partial shift of the interface level distribution with bias voltage. This approach connects the low-frequency (similar to 1 Hz) capacitance spectra, which exhibits a transition between positive to negative values, to the change in the occupancy of interface states with voltage. Simulations based on the model allow to derive the density of interface states effectively intervening in the carrier injection (similar to 5 x 10(12) cm(-2)), which exhibit a Gaussian-like distribution. A kinetically determined hole barrier is calculated at levels located similar to 0.4 eV below the contact work function. (C) 2008 Elsevier B.V. All rights reserved.

Harmonic identification using parallel neural networks in single-phase systems

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Critical evaluation of FBD, pq and CPT current decompositions for four-wire circuits

This paper investigates the major similarities and discrepancies of three important current decompositions proposed for the interpretation of unbalanced and/or non linear three-phase four-wire circuits. The considered approaches were the so-called FBD Theory, the pq-Theory and the CPT. Although the methods are based on different concepts, the results obtained under ideal conditions (sinusoidal and balanced signals) are very similar. The main differences appear in the presence of unbalanced and non linear load conditions. It will be demonstrated and discussed how the choice of the voltage referential and the return conductor impedance can influence in the resulting current components, as well as, the way of interpreting a power circuit with return conductor. Under linear unbalanced conditions, both FBD and pq-Theory suggest that the some current components contain a third-order harmonic. Besides, neither pq-Theory nor FBD method are able to provide accurate information for reactive current under unbalanced and distorted conditions, what seems to be done by means of the CPT. © 2009 IEEE.

Selective current compensators based on the conservative power theory

This paper presents possible selective current compensation strategies based on the Conservative Power Theory (CPT). This recently proposed theory, introduces the concept of complex power conservation under non-sinusoidal conditions. Moreover, the related current decompositions results in several current terms, which are associated with a specific physical phenomena (power absorption P, energy storage Q, voltage and current distortion D). Such current components are used in this work for the definition of different current compensators, which can be selective in terms of minimizing particular disturbing effects. The choice of one or other current component for compensation directly affects the sizing and cost of active and/or passive devices and it will be demonstrated that it can be done to attend predefined limits for harmonic distortion, unbalances and/or power factor. Single-phase compensation strategies will be discussed by means of the CPT and simulation results will demonstrate their performance. © 2009 IEEE.

A comparative analysis of FBD, PQ and CPT current decompositions - Part II: Three-phase four-wire systems

This paper investigates the major similarities and discrepancies among three important current decompositions proposed for the interpretation of unbalanced and/or non linear three-phase four-wire power circuits. The considered approaches were the so-called FBD Theory, the pq-Theory and the CPT. Although the methods are based on different concepts, the results obtained under ideal conditions (sinusoidal and balanced signals) are very similar. The main differences appear in the presence of unbalanced and non linear load conditions. It will be demonstrated and discussed how the choice of the voltage referential and the return conductor impedance can influence in the resulting current components, as well as, the way of interpreting a power circuit with return conductor. Under linear unbalanced conditions, both FBD and pq-Theory suggest that the some current components contain a third-order harmonic. Besides, neither pq-Theory nor FBD method are able to provide accurate information for reactive current under unbalanced and distorted conditions, what can be done by means of the CPT. © 2009 IEEE.

Shunt active compensation based on the Conservative Power Theory current's decomposition

Considering the operation of shunt active compensators, such as active power filters, this paper proposes possible compensation strategies by means of the recent formulation of the Conservative Power Theory (CPT). The CPT current's decomposition results in several current components, which are associated with specific load characteristics (power transfer, energy storage, unbalances and/or non linearities). These current components are used for the definition of different compensation strategies, which can be selective in terms of minimizing particular disturbing effects. In order to validate the applicability of these new compensation strategies, simulation and experimental results for three-phase four-wire systems are presented. © 2011 IEEE.

A model for computing vibration induced stresses of electronic components in a general flexible mounting

This paper develops a novel full analytic model for vibration analysis of solid-state electronic components. The model is just as accurate as finite element models and numerically light enough to permit for quick design trade-offs and statistical analysis. The paper shows the development of the model, comparison to finite elements and an application to a common engineering problem. A gull-wing flat pack component was selected as the benchmark test case, although the presented methodology is applicable to a wide range of component packages. Results showed very good agreement between the presented method and finite elements and demonstrated the usefulness of the method in how to use standard test data for a general application. © 2013 Elsevier Ltd.

Stimuli-Responsive Biointerface Based on Polymer Brushes for Glucose Detection

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Performance of electronic devices submitted to X-rays and high energy proton beams

In this work we have studied the radiation effects on MOSFET electronic devices. The integrated circuits were exposed to 10 key X-ray radiation and 2.6 MeV energy proton beam. We have irradiated MOSFET devices with two different geometries: rectangular-gate transistor and circular-gate transistor. We have observed the cumulative dose provokes shifts on the threshold voltage and increases or decreases the transistor's off-state and leakage current. The position of the trapped charges in modern CMOS technology devices depends on radiation type, dose rate, total dose, applied bias and is a function of device geometry. We concluded the circular-gate transistor is more tolerant to radiation than the rectangular-gate transistor. (C) 2011 Elsevier B.V. All rights reserved.

Numerical study of graphene as a channel material for field-effect transistors

Graphene excellent properties make it a promising candidate for building future nanoelectronic devices. Nevertheless, the absence of an energy gap is an open problem for the transistor application. In this thesis, graphene nanoribbons and pattern-hydrogenated graphene, two alternatives for inducing an energy gap in graphene, are investigated by means of numerical simulations. A tight-binding NEGF code is developed for the simulation of GNR-FETs. To speed up the simulations, the non-parabolic effective mass model and the mode-space tight-binding method are developed. The code is used for simulation studies of both conventional and tunneling FETs. The simulations show the great potential of conventional narrow GNR-FETs, but highlight at the same time the leakage problems in the off-state due to various tunneling mechanisms. The leakage problems become more severe as the width of the devices is made larger, and thus the band gap smaller, resulting in a poor on/off current ratio. The tunneling FET architecture can partially solve these problems thanks to the improved subthreshold slope; however, it is also shown that edge roughness, unless well controlled, can have a detrimental effect in the off-state performance. In the second part of this thesis, pattern-hydrogenated graphene is simulated by means of a tight-binding model. A realistic model for patterned hydrogenation, including disorder, is developed. The model is validated by direct comparison of the momentum-energy resolved density of states with the experimental angle-resolved photoemission spectroscopy. The scaling of the energy gap and the localization length on the parameters defining the pattern geometry is also presented. The results suggest that a substantial transport gap can be attainable with experimentally achievable hydrogen concentration.