A biomimetic piezoelectric pump: Computational and experimental characterization

Flow pumps have been developed for classical applications in Engineering, and are important instruments in areas such as Biology and Medicine. Among applications for this kind of device we notice blood pump and chemical reagents dosage in Bioengineering. Furthermore, they have recently emerged as a viable thermal management solution for cooling applications in small-scale electronic devices. This work presents the performance study of a novel principle of a piezoelectric flow pump which is based oil the use of a bimorph piezoelectric actuator inserted in fluid (water). Piezoelectric actuators have some advantages over classical devices, such as lower noise generation and ease of miniaturization. The main objective is the characterization of this piezoelectric pump principle through computational simulations (using finite element software), and experimental tests through a manufactured prototype. Computational data, Such as flow rate and pressure curves, have also been compared with experimental results for validation purposes. (C) 2009 Elsevier B.V. All rights reserved.

Modeling of functionally graded piezoelectric ultrasonic transducers

The application of functionally graded material (FGM) concept to piezoelectric transducers allows the design of composite transducers without interfaces, due to the continuous change of property values. Thus, large improvements can be achieved, as reduction of stress concentration, increasing of bonding strength, and bandwidth. This work proposes to design and to model FGM piezoelectric transducers and to compare their performance with non-FGM ones. Analytical and finite element (FE) modeling of FGM piezoelectric transducers radiating a plane pressure wave in fluid medium are developed and their results are compared. The ANSYS software is used for the FE modeling. The analytical model is based on FGM-equivalent acoustic transmission-line model, which is implemented using MATLAB software. Two cases are considered: (i) the transducer emits a pressure wave in water and it is composed of a graded piezoceramic disk, and backing and matching layers made of homogeneous materials; (ii) the transducer has no backing and matching layer; in this case, no external load is simulated. Time and frequency pressure responses are obtained through a transient analysis. The material properties are graded along thickness direction. Linear and exponential gradation functions are implemented to illustrate the influence of gradation on the transducer pressure response, electrical impedance, and resonance frequencies. (C) 2009 Elsevier B. V. All rights reserved.

Topology Optimized Design, Microfabrication and Characterization of Electro-Thermally Driven Microgripper

This article presents a systematic and logical study of the topology optimized design, microfabrication, and static/dynamic performance characterization of an electro-thermo-mechanical microgripper. The microgripper is designed using a topology optimization algorithm based on a spatial filtering technique and considering different penalization coefficients for different material properties during the optimization cycle. The microgripper design has a symmetric monolithic 2D structure which consists of a complex combination of rigid links integrating both the actuating and gripping mechanisms. The numerical simulation is performed by studying the effects of convective heat transfer, thermal boundary conditions at the fixed anchors, and microgripper performance considering temperature-dependent and independent material properties. The microgripper is fabricated from a 25 mm thick nickel foil using laser microfabrication technology and its static/dynamic performance is experimentally evaluated. The static and dynamic electro-mechanical characteristics are analyzed as step response functions with respect to tweezing/actuating displacements, applied current/power, and actual electric resistance. A microgripper prototype having overall dimensions of 1mm (L) X 2.5mm (W) is able to deliver the maximum tweezing and actuating displacements of 25.5 mm and 33.2 mm along X and Y axes, respectively, under an applied power of 2.32 W. Experimental performance is compared with finite element modeling simulation results.

Multi-actuated functionally graded piezoelectric micro-tools design: A multiphysics topology optimization approach

Micro-tools offer significant promise in a wide range of applications Such as cell Manipulation, microsurgery, and micro/nanotechnology processes. Such special micro-tools consist of multi-flexible structures actuated by two or more piezoceramic devices that must generate output displacements and forces lit different specified points of the domain and at different directions. The micro-tool Structure acts as a mechanical transformer by amplifying and changing the direction of the piezoceramics Output displacements. The design of these micro-tools involves minimization of the coupling among movements generated by various piezoceramics. To obtain enhanced micro-tool performance, the concept of multifunctional and functionally graded materials is extended by, tailoring elastic and piezoelectric properties Of the piezoceramics while simultaneously optimizing the multi-flexible structural configuration using multiphysics topology optimization. The design process considers the influence of piezoceramic property gradation and also its polarization sign. The method is implemented considering continuum material distribution with special interpolation of fictitious densities in the design domain. As examples, designs of a single piezoactuator, an XY nano-positioner actuated by two graded piezoceramics, and a micro-gripper actuated by three graded piezoceramics are considered. The results show that material gradation plays an important role to improve actuator performance, which may also lead to optimal displacements and coupling ratios with reduced amount of piezoelectric material. The present examples are limited to two-dimensional models because many of the applications for Such micro-tools are planar devices. Copyright (c) 2008 John Wiley & Sons, Ltd.

Piezoresistive sensor design using topology optimization

Piezoresistive materials, materials whose resistivity properties change when subjected to mechanical stresses, are widely utilized in many industries as sensors, including pressure sensors, accelerometers, inclinometers, and load cells. Basic piezoresistive sensors consist of piezoresistive devices bonded to a flexible structure, such as a cantilever or a membrane, where the flexible structure transmits pressure, force, or inertial force due to acceleration, thereby causing a stress that changes the resistivity of the piezoresistive devices. By applying a voltage to a piezoresistive device, its resistivity can be measured and correlated with the amplitude of an applied pressure or force. The performance of a piezoresistive sensor is closely related to the design of its flexible structure. In this research, we propose a generic topology optimization formulation for the design of piezoresistive sensors where the primary aim is high response. First, the concept of topology optimization is briefly discussed. Next, design requirements are clarified, and corresponding objective functions and the optimization problem are formulated. An optimization algorithm is constructed based on these formulations. Finally, several design examples of piezoresistive sensors are presented to confirm the usefulness of the proposed method.

Tailoring vibration mode shapes using topology optimization and functionally graded material concepts

Tailoring specified vibration modes is a requirement for designing piezoelectric devices aimed at dynamic-type applications. A technique for designing the shape of specified vibration modes is the topology optimization method (TOM) which finds an optimum material distribution inside a design domain to obtain a structure that vibrates according to specified eigenfrequencies and eigenmodes. Nevertheless, when the TOM is applied to dynamic problems, the well-known grayscale or intermediate material problem arises which can invalidate the post-processing of the optimal result. Thus, a more natural way for solving dynamic problems using TOM is to allow intermediate material values. This idea leads to the functionally graded material (FGM) concept. In fact, FGMs are materials whose properties and microstructure continuously change along a specific direction. Therefore, in this paper, an approach is presented for tailoring user-defined vibration modes, by applying the TOM and FGM concepts to design functionally graded piezoelectric transducers (FGPT) and non-piezoelectric structures (functionally graded structures-FGS) in order to achieve maximum and/or minimum vibration amplitudes at certain points of the structure, by simultaneously finding the topology and material gradation function. The optimization problem is solved by using sequential linear programming. Two-dimensional results are presented to illustrate the method.

Design of pressure vessels using shape optimization: An integrated approach

Previous papers related to the optimization of pressure vessels have considered the optimization of the nozzle independently from the dished end. This approach generates problems such as thickness variation from nozzle to dished end (coupling cylindrical region) and, as a consequence, it reduces the optimality of the final result which may also be influenced by the boundary conditions. Thus, this work discusses shape optimization of axisymmetric pressure vessels considering an integrated approach in which the entire pressure vessel model is used in conjunction with a multi-objective function that aims to minimize the von-Mises mechanical stress from nozzle to head. Representative examples are examined and solutions obtained for the entire vessel considering temperature and pressure loading. It is noteworthy that different shapes from the usual ones are obtained. Even though such different shapes may not be profitable considering present manufacturing processes, they may be competitive for future manufacturing technologies, and contribute to a better understanding of the actual influence of shape in the behavior of pressure vessels. (C) 2011 Elsevier Ltd. All rights reserved.

Three-dimensional electrical impedance, tomography: A topology optimization approach

Electrical impedance tomography is a technique to estimate the impedance distribution within a domain, based on measurements on its boundary. In other words, given the mathematical model of the domain, its geometry and boundary conditions, a nonlinear inverse problem of estimating the electric impedance distribution can be solved. Several impedance estimation algorithms have been proposed to solve this problem. In this paper, we present a three-dimensional algorithm, based on the topology optimization method, as an alternative. A sequence of linear programming problems, allowing for constraints, is solved utilizing this method. In each iteration, the finite element method provides the electric potential field within the model of the domain. An electrode model is also proposed (thus, increasing the accuracy of the finite element results). The algorithm is tested using numerically simulated data and also experimental data, and absolute resistivity values are obtained. These results, corresponding to phantoms with two different conductive materials, exhibit relatively well-defined boundaries between them, and show that this is a practical and potentially useful technique to be applied to monitor lung aeration, including the possibility of imaging a pneumothorax.

Predicciones de variables hidrológicas en la Región Central Argentina

Con el devenir de los siglos, la mención de inundación adquirió una connotación negativa; ya no se la asocia con el efecto benéfico que le atribuían los antiguos egipcios, o sea, con el concepto de recurso, sino con los eventuales perjuicios que produciría en márgenes densamente pobladas, es decir, con el concepto de riesgo. En si una predicción no especifica cuándo se producirá un suceso hipotético crítico, sino, cual será la magnitud de este dada su duración y probabilidad. Por lo tanto, se asume que sucederá en algún momento de un período plurianual, vinculado con la planificación del área potencialmente afectable, lo cual torna improcedente asignarle fecha y hora. Esto la diferencia de un pronóstico, que anticipa el monto y el tiempo de ocurrencia, con el objeto de informar acerca del acontecimiento o inminencia de un fenómeno peligroso real durante una emergencia hídrica. La presente propuesta tiene como objetivo principal abordar el génesis de los eventos hidrológicos extremos, mediante la formación de recursos humanos propios, quienes se verán fortalecidos gracias a la colaboración de equipos técnicos especializados ajenos a nuestra institución académica, siendo estos equipos pioneros en abordar la problemática planteada. A su vez, se pretende generar una importante base de datos hidrológicos, la cual será empleada para validar y generalizar técnicas predictivas, brindando herramientas técnicas de validez y robustez comprobada, a todos aquellos entes responsables Vulnerabilidad del sistemade la planificación del uso del suelo, la gestión integrada del recurso hídrico, la defensa civil y la salud pública entre otros.

Manual de procedimientos para el cálculo de lluvias de diseño. Escala provincial y nacional

El diseño hidrológico se define como la evaluación del impacto de los procesos hidrológicos y la estimación de los valores correspondientes a las variables representativas con fines de diseño. Las pautas para establecer un valor de diseño para obras hidráulicas son el costo y la seguridad. Sobredimensionar las obras es antieconómico, en tanto que, si las estructuras se subdimensionan pueden fallar con resultados catastróficos. Los estudios dirigidos a determinar las crecidas de proyecto de diversas estructuras hidráulicas requieren series de datos históricos de caudal, pero esta información en nuestro país es poco frecuente. En esos casos, el análisis se hace sobre las precipitaciones causantes del fenómeno denominadas lluvia de diseño. El equipo responsable de este proyecto tiene una experiencia de investigación y desarrollo de más de 15 años en el tema. Por lo que el objeto de la presente propuesta es plasmar los avances alcanzados sobre las lluvias de diseño en un manual que permita brindar una herramienta técnica (a escala provincial y nacional) a los profesionales dedicados a la planificación, proyecto y construcción de obras hidráulicas

Manual de procedimientos para el cálculo de lluvias de diseño – (escala provincial y nacional).

El diseño hidrológico se define como la evaluación del impacto de los procesos hidrológicos y la estimación de los valores correspondientes a las variables representativas con fines de diseño. Las pautas para establecer un valor de diseño para obras hidráulicas son el costo y la seguridad. Sobredimensionar las obras es antieconómico, en tanto que, si las estructuras se subdimensionan pueden fallar con resultados catastróficos. Los estudios dirigidos a determinar las crecidas de proyecto de diversas estructuras hidráulicas requieren series de datos históricos de caudal, pero esta información en nuestro país es poco frecuente. En esos casos, el análisis se hace sobre las precipitaciones causantes del fenómeno denominadas lluvia de diseño. El equipo responsable de este proyecto tiene una experiencia de investigación y desarrollo de más de 15 años en el tema. Por lo que el objeto de la presente propuesta es plasmar los avances alcanzados sobre las lluvias de diseño en un manual que permita brindar una herramienta técnica (a escala provincial y nacional) a los profesionales dedicados a la planificación, proyecto y construcción de obras hidráulicas.

Incertidumbres de modelos hidrológicos predictivos - aplicación a modelos intensidad-duración-recurrencia (I-D-T) de lluvia.

Las relaciones intensidad de lluvia-duración-Recurrencia (i-d-T) y el patrón de distribución temporal de las lluvias, requeridos para estimar las "Crecientes de proyecto", empleadas para el proyecto de obras de ingeniería civil y planificación del uso del suelo, solo se pueden extraer de extensos registros de alta frecuencia, normalmente fajas pluviográficas, elemento en general no disponible en Argentina. En cambio, es habitual disponer de otro dato de lluvia provisto por pluviómetros: la lámina diaria total. En la provincia de Córdoba, existe información de relaciones i-d-T para siete estaciones pluviográficas, insuficientes para lograr una buena cobertura espacial de toda la Provincia. En este trabajo, se buscará regionalizar las ternas i-d-T para toda la provincia de Córdoba utilizando una técnica de regionalización la cuál contempla el uso de un modelo predictivo e información pluviométrica la cuál se caracteriza por su mayor densidad espacial. A tal fin se espera plasmar la información disponible en mapas digitales (grillas con resolución espacial acorde a los fines de proyecto) los cuales permitan caracterizar el comportamiento estadístico de la variable lluvia máxima diaria, a través de dos parámetros descriptivos como son la media y desvió estándar de los logaritmos de dichas series, incorporando a través de ellos características locales al modelo predictivo. Toda la información procesada y los mapas elaborados serán conformados en un Sistemas de Información Geográfica (SIG). El proceso metodológico empleado se puede resumir en siete actividades principales, a saber: a) selección de las estaciones pluviométricas disponibles en la provincia de Córdoba en base a la longitud de las series de registros, la verificación sobre las series de valores máximos de lluvias diarias de las hipótesis estadísticas básicas (independencia, estacionalidad y homogeneidad) y detección de datos atípicos. b) Determinación de los parámetros provenientes del análisis de estadística inferencial sobre las series de lluvias máximas diarias registradas en los puestos seleccionados y sobre los logaritmos de ellas. c) Ubicación especial de las distintas estaciones pluviométricas y sus parámetros estadísticos, d) Interpolación de la información puntual, generación de mapas de interpolación y análisis tendencial. e) implementación del Modelo predictivo para la regionalización de las curvas i-d-T. f) cuantificación de las incertidumbres provenientes de las distintas fuentes que permitan determinar el intervalo de confianza de los resultados obtenidos, para ello se espera plantear uno o más de los siguientes enfoques metodológicos, estadística clásica (análisis de primer orden), métodos bayeseanos, principio de pareto y/o principio de equifinalidad. g) Análisis y Validación de los resultados.