Membrana de alumina anódica: comportamento da microestrutura e estudo das propriedades ópticas após tratamento térmico

Thin commercial aluminum electrolytic and passed through reactions was obtained with anodic alumina membranes nanopores. These materials have applications in areas recognized electronic, biomedical, chemical and biological weapons, especially in obtaining nanostructures using these membranes as a substrate or template for processing nanowires, nanodots and nanofibers for applications noble. Previous studies showed that the membranes that have undergone heat treatment temperature to 1300° C underwent changes in morphology, crystal structure and optical properties. This aim, this thesis, a study of the heat treatment of porous anodic alumina membranes, in order to obtain and to characterize the behavior changes structures during the crystallization process of the membranes, at temperatures ranging between 300 and 1700° C. It was therefore necessary to mount a system formed by a tubular furnace resistive alumina tube and controlled environment, applying flux with special blend of Ag-87% and 13% N2, in which argon had the role of carrying out the oxygen nitrogen system and induce the closing of the pores during the densification of the membrane. The duration of heat treatment ranged from 60 to 15 minutes, at temperatures from 300 to 1700° C respectively. With the heat treatment occurred: a drastic reduction of porosity, grain growth and increased translucency of the membrane. For the characterization of the membranes were analyzed properties: Physical - thermogravimetric, X-ray diffraction, BET surface area; morphological - SEM, EDS through compositional and, optical absorbance, and transmittance in the UV-VIS, and FTIR. The results using the SEM showed that crystallization has occurred, densification and significant changes in membrane structure, as well as obtaining microtube, the BET analysis showed a decrease in specific surface area of the membranes has to 44.381 m2.g-1 to less than 1.8 m2.g-1 and in the analysis of transmittance and absorbance was found a value of 16.5% in the range of 800 nm, characteristic of the near infrared and FTIR have confirmed the molecular groups of the material. Thus, one can say that the membranes were mixed characteristics and properties which qualify for use in gas filtration system, as well as applications in the range of optical wavelength of the infra-red, and as a substrate of nanomaterials. This requires the continuation and deepening of additional study

Enamel microabrasion followed by dental bleaching for patients after orthodontic treatment - Case reports

This article reports clinical procedures used to remove residual bonded resin and enamel stains following bracket debonding at the conclusion of orthodontic treatment. A water-cooled fine-tapered diamond bur was used for resin removal, followed by enamel surface finishing using a commercially available microabrasion paste. It was noted that residual tooth coloration remained yellowish because of enamel translucency; the yellow dentin shade showed through. Additional tooth shade lightening was achieved using carbamide peroxide dental bleaching solution in custom-formed trays. This report describes a safe and effective technique that optimizes tooth appearance at the conclusion of orthodontic therapy. Mechanical resin removal, enamel microabrasion, and tooth bleaching are employed.

Os histricomorfos sul-americanos: uma análise comparativa do desenvolvimento embriológico

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Functional and esthetic rehabilitation with In-Ceram alumina and zirconia system: A multidisciplinary approach

The development of all-ceramic systems following metalceramics restorations allowed simulation of natural dentition due to favorable esthetics and resistance. In-Ceram is an alternative when esthetics is primordial as well as resistance required in rehabilitation. However, an ideal smile is associated to not only shape, color, texture and translucency but also harmony with gingival tissue. So, the aim of this study is to report a clinical case based on periodontal and fixed partial dentures principles to perform periodontal plastic surgery followed by esthetic rehabilitation. A female patient, 40-year-old, presented complaint about dental esthetics. After clinical and radiographic exams, metal-ceramics crowns (teeth 11, 12, 13, 21, 22 and 23) were considered unsatisfactory due to marginal leakage, color change in gingival tissue associated to metallic margin, and gummy smile. So, a crown lengthening surgery of anterior teeth was performed followed by rehabilitation of superior teeth with In-Ceram single crowns. Clinical significance: The interaction between periodontics and fixed prosthodontic area is the key of an adequated treatment planning which involves gingival smile to provide function and an esthetic condition in association with an esthetic, resistant and predictable material.

Anterior restorations in bleached teeth: Difficulty establishing the color after bleaching

It is becoming more common for patients to look for cosmetic procedures in dental offices. The search for lost or desired esthetics by patients is increasingly frequent and the professional must be able to meet this demand. To do this, dentists not only need to return the tooth back to its normal functioning state but also promote esthetic excellence. In this context, the association of cosmetic procedures, such as teeth whitening and restorative procedures, such as direct adhesive restorations is very common. The composite resins employed nowadays allow the reproduction of various optical properties of natural teeth. With these composite resins, it is possible to reproduce features such as translucency, opacity and specific features of the dental element, to bring back the esthetic harmony of the smile. This article reports a clinical case demonstrating the placement, in a stratified manner, of composite resins in bleached teeth, as well as the reproduction of optical and natural aspects of the teeth. In order to achieve esthetic and functional success of the restored procedure, it is important to be familiar with the new techniques and new materials in the marketand above all, we must know when and where to use them.

Effect of ceramic shade on the degree of conversion of a dual-cure resin cement analyzed by FTIR

Objectives: The aim of this research was to evaluate the degree of monomer conversion of different resin cement shades when photocured under different feldspathic ceramic shades. The photocuring time was also evaluated as well as the translucency of each ceramic shade. Methods: Three VITA VM7 ceramic shades (Base Dentin 0M1, Base Dentin 2M2 and Base Dentin 5M3) were used to determine the translucency percentage. A spectrophotometer MiniScan was used to measure the opacity percentage of each specimen (2-mm-thick) and then the translucency was calculated. To measure the degree of conversion (DC), the resin cement (Variolink II; A3 Yellow and transparent) specimens (thickness: 100 μm) were photocured under a ceramic block (2-mm-thick) for 20 or 40 s. Specimens photocured without the ceramic block were used as control. Sixteen groups (n = 3) were evaluated. Micro-ATR/FTIR spectrometry was used to evaluate the extent of polymerization of all specimens after 24 h. The %DC was calculated of experimentally polymerized versus maximally polymerized composite. Results: The translucency percentages of 0M1, 2M2 and 5M3 ceramics were 12.41 (1.02)%, 5.75 (1.91)% and 1.07 (0.03)%, respectively. The %DC of both resin cement shades cured under ceramic 5M3 was significantly lower than the other groups (p < 0.05). The %DC of 0M1 groups exhibited no significant difference from 2M2 groups (p > 0.05), with the exception of the transparent cement photocured for 40 s. Conclusion: Photocuring under 2 mm ceramic showed that the increase in chroma saturation significantly decreased Variolink II resin cement %DC (100-μm-thick). © 2013 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Avaliação do efeito da fumaça do cigarro na translucidez da resina composta: influência do selante da superfície e da escovação

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação in vitro da translucidez de dois sistemas cerâmicos metal-free: In-Ceram x Empress 2

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Olhar tecer des: (cor)pos forças fluxos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência do clareamento dental na cor, translucidez e fluorescência do esmalte e dentina

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Neurocriptococose pediátrica no Estado do Pará: espectro de achados tomográficos na infecção por Cryptococcus neoformans var. gattii

Este estudo mostra o espectro de lesões cerebrais, através de tomografia computadorizada, na neurocriptococose da infância, por Cryptococcus neoformans var. gattii, no Estado do Pará. Analisamos os achados tomográficos de onze crianças (menores de 13 anos de idade), com infecção comprovada do sistema nervoso central por Cryptococcus neoformans var. gattii, internados no Hospital Universitário João de Barros Barreto, Belém PA, entre janeiro de 1992 a dezembro de 2000. A neurocriptococose foi definida pela identificação de leveduras encapsuladas ao exame microscópico, isolamento de Cryptococcus neoformans do líquor e identificação positiva da variedade gattii, através do meio composto de canavanina, glicina e azul-de-bromotimol com, pelo menos, o estudo tomográfico no momento do diagnóstico. A idade das crianças estudadas variou entre 6 a 12 anos, com média de 8,8 anos. Cincos eram meninos e seis meninas. Os principais achados clínicos foram cefaléia, febre e rigidez de nuca (n=11), náuseas e vômitos (n=10). O tempo médio entre o início dos sintomas e o diagnóstico foi de 4,2 semanas (variando de 2 a 8 semanas). Todas as tomografias de crânio foram anormais. Em todos os pacientes foram observados nódulos hipodensos. As demais anormalidades tomográficas observadas foram: 6 pacientes com hidrocefalia, 9 com atrofia difusa e 5 com associação de hidrocefalia e atrofia difusa. Descreve-se, pela primeira vez, achados tomográficos em série de casos de neurocriptococose por Cryptococcus neoformans var. gattii em crianças imunocompetentes. Este estudo mostra que esta infecção desenvolve múltiplos nódulos hipodensos, especialmente na região dos gânglios da base e na substância branca cerebral. As lesões, aparentemente progridem para importante atrofia da substância branca, com dilatação ventricular e proeminência de sulcos cerebrais, provavelmente, conseqüência de hidrocefalia compensatória. Em geral, estes pacientes apresentaram alterações leves do córtex cerebral.

Avaliação audiomética em pacientes tratados de meningite por Cryptococcus gattii

Este estudo mostra a avaliação audiométrica, composta de audiometria tonal limiar e imitanciometria, em pacientes tratados de meningite por Cryptococcus gattii. Trata-se de um estudo tipo relato de casos. Foram avaliados seis pacientes com infecção comprovada do sistema nervoso central pelo Cryptococcus gattii, internados no Hospital Universitário João de Barros Barreto, entre janeiro de 2000 a novembro de 2007, para tratamento antifúngico. A idade dos pacientes analisados variou entre 12 e 37 anos. Três eram homens e três mulheres. Todos procedentes de municípios vizinhos, não sendo ninguém da capital Belém. As principais manifestações clínicas foram cefaléia e vômitos, presentes nas histórias de todos os pacientes, seguidas de febre e rigidez de nuca, cada uma delas ausentes em apenas um paciente, não coincidentes. O tempo de doença até o diagnóstico variou de 3 a 8 semanas. Dos três homens avaliados, dois apresentaram perda auditiva. Num deles a perda foi moderada e unilateral e no outro foi assimétrica e bilateral. Das três mulheres, apenas uma apresentou alteração auditiva. Nessa paciente houve apenas um rebaixamento leve numa freqüência isolada, de 4.000 Hz. Descreve-se achados audiométricos em relato de casos de pacientes tratados de meningite por Cryptococcus gattii.

Adesão e grau de conversão: efeito das cores da cerâmica e do agente de fixação resinoso

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Níveis de adubação N-K do abacaxizeiro 'BRS Imperial' no extremo Sul da Bahia

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Bond Strength of Different Resin Cement and Ceramic Shades Bonded to Dentin

Purpose: To evaluate the microtensile bond strength (MTBS) of ceramic cemented to dentin varying the resin cement and ceramic shades.Materials and Methods: Two VITA VM7 ceramic shades (Base Dentine 0M1 and Base Dentine 5M3) were used. A spectrophotometer was used to determine the percentage translucency of ceramic (thickness: 2.5 mm). For the MTBS test, 80 molar dentin surfaces were etched and an adhesive was applied. Forty blocks (7.2 x 7.2 x 2.5 mm) of each ceramic shade were produced and the ceramic surface was etched (10% hydrofluoric acid) for 60 s, followed by the application of silane and resin cement (A3 yellow and transparent). The blocks were cemented to dentin using either A3 or transparent cement. Specimens were photoactivated for 20 s or 40 s, stored in distilled water (37 degrees C/24 h), and sectioned. Eight experimental groups were obtained (n = 10). Specimens were tested for MTSB using a universal testing machine. Data were statistically analyzed using ANOVA and Tukey's post-hoc tests (alpha <= 0.05).Results: The percentage translucency of 0M1 and 5M3 ceramics were 10.06 (+/- 0.25)% and 1.34 (+/- 0.02)%, respectively. The lowest MTBS was observed for the ceramic shade 5M3. For the 0M1 ceramic, the A3 yellow cement that was photocured for 20 s exhibited the lowest MTBS, while the transparent cement that was photocured for 40 s presented the highest MTBS.Conclusions: For the 2.5-mm-thick 5M3 ceramic restorations, the MTBS of ceramic cemented to dentin significantly increased. The dual-curing cement Variolink II photocured for 40 s is not recommended for cementing the Base Dentine 5M3 feldspathic ceramic to dentin.