An integrated environment for filter design

Analog filters and direct digital filters are implemented using digital signal processing techniques. Specifically, Butterworth, Elliptic, and Chebyshev filters are implemented using the Motorola 56001 Digital Signal Processor by the integration of three software packages: MATLAB, C++, and Motorola's Application Development System. The integrated environment allows the novice user to design a filter automatically by specifying the filter order and critical frequencies, while permitting more experienced designers to take advantage of MATLAB's advanced design capabilities. This project bridges the gap between the theoretical results produced by MATLAB and the practicalities of implementing digital filters using the Motorola 56001 Digital Signal Processor. While these results are specific to the Motorola 56001 they may be extended to other digital signal processors. MATLAB handles the filter calculations, a C++ routine handles the conversion to assembly code, and the Motorola software compiles and transmits the code to the processor

The Technocrat - v. 35, no. 5

In this issue...Martin Karplus, Noble Prize, Dodgeball Duel, President Obama, community college, Pintler mountains, cell phone evolution, Facebook, social media

Sequential purification and crystal growth for the production of low cost silicon substrates : quarterly technical progress report no. 1, September 15-December 31, 1979 /

"February 1980."

Sequential purification and crystal growth for the production of low cost silicon substrates : annual report, September 15, 1979-September 14, 1980 /

"Work Performed Under Contract No. AC02-77CH00178."

Sequential purification and crystal growth for the production of low cost silicon substrates : quarterly technical progress report no. 3, April 1-June 30, 1980 /

"August 1980."

Thin-film polycrystalline silcon solar cells : quarterly technical progress report no. 3 for period April 1 - June 30, 1980 /

"Work Performed Under Contract No. AC02-77CH00178."

Thin-film polycrystalline silcon solar cells : final technical report for the period October 1, 1979-September 30, 1980. /

"Contract No. AC02-77CH00178."

The design of a real-time nowcasting system for localised weather

National meteorological offices are largely concerned with synoptic-scale forecasting where weather predictions are produced for a whole country for 24 hours ahead. In practice, many local organisations (such as emergency services, construction industries, forestry, farming, and sports) require only local short-term, bespoke, weather predictions and warnings. This thesis shows that the less-demanding requirements do not require exceptional computing power and can be met by a modern, desk-top system which monitors site-specific ground conditions (such as temperature, pressure, wind speed and direction, etc) augmented with above ground information from satellite images to produce `nowcasts'. The emphasis in this thesis has been towards the design of such a real-time system for nowcasting. Local site-specific conditions are monitored using a custom-built, stand alone, Motorola 6809 based sub-system. Above ground information is received from the METEOSAT 4 geo-stationary satellite using a sub-system based on a commercially available equipment. The information is ephemeral and must be captured in real-time. The real-time nowcasting system for localised weather handles the data as a transparent task using the limited capabilities of the PC system. Ground data produces a time series of measurements at a specific location which represents the past-to-present atmospheric conditions of the particular site from which much information can be extracted. The novel approach adopted in this thesis is one of constructing stochastic models based on the AutoRegressive Integrated Moving Average (ARIMA) technique. The satellite images contain features (such as cloud formations) which evolve dynamically and may be subject to movement, growth, distortion, bifurcation, superposition, or elimination between images. The process of extracting a weather feature, following its motion and predicting its future evolution involves algorithms for normalisation, partitioning, filtering, image enhancement, and correlation of multi-dimensional signals in different domains. To limit the processing requirements, the analysis in this thesis concentrates on an `area of interest'. By this rationale, only a small fraction of the total image needs to be processed, leading to a major saving in time. The thesis also proposes an extention to an existing manual cloud classification technique for its implementation in automatically classifying a cloud feature over the `area of interest' for nowcasting using the multi-dimensional signals.

Tool cutting force modeling and wear estimation of micro -end-milling operations

The applications of micro-end-milling operations have increased recently. A Micro-End-Milling Operation Guide and Research Tool (MOGART) package has been developed for the study and monitoring of micro-end-milling operations. It includes an analytical cutting force model, neural network based data mapping and forecasting processes, and genetic algorithms based optimization routines. MOGART uses neural networks to estimate tool machinability and forecast tool wear from the experimental cutting force data, and genetic algorithms with the analytical model to monitor tool wear, breakage, run-out, cutting conditions from the cutting force profiles. ^ The performance of MOGART has been tested on the experimental data of over 800 experimental cases and very good agreement has been observed between the theoretical and experimental results. The MOGART package has been applied to the micro-end-milling operation study of Engineering Prototype Center of Radio Technology Division of Motorola Inc. ^

Tool cutting force modeling and wear estimation of micro-end-milling operations

The applications of micro-end-milling operations have increased recently. A Micro-End-Milling Operation Guide and Research Tool (MOGART) package has been developed for the study and monitoring of micro-end-milling operations. It includes an analytical cutting force model, neural network based data mapping and forecasting processes, and genetic algorithms based optimization routines. MOGART uses neural networks to estimate tool machinability and forecast tool wear from the experimental cutting force data, and genetic algorithms with the analytical model to monitor tool wear, breakage, run-out, cutting conditions from the cutting force profiles. The performance of MOGART has been tested on the experimental data of over 800 experimental cases and very good agreement has been observed between the theoretical and experimental results. The MOGART package has been applied to the micro-end-milling operation study of Engineering Prototype Center of Radio Technology Division of Motorola Inc.

Analysis of the lateral diffuse metal-oxide semiconductor (LDMOS) power amplifier for cellular base stations

The primary purpose of this thesis was to present a theoretical large-signal analysis to study the power gain and efficiency of a microwave power amplifier for LS-band communications using software simulation. Power gain, efficiency, reliability, and stability are important characteristics in the power amplifier design process. These characteristics affect advance wireless systems, which require low-cost device amplification without sacrificing system performance. Large-signal modeling and input and output matching components are used for this thesis. Motorola's Electro Thermal LDMOS model is a new transistor model that includes self-heating affects and is capable of small-large signal simulations. It allows for most of the design considerations to be on stability, power gain, bandwidth, and DC requirements. The matching technique allows for the gain to be maximized at a specific target frequency. Calculations and simulations for the microwave power amplifier design were performed using Matlab and Microwave Office respectively. Microwave Office is the simulation software used in this thesis. The study demonstrated that Motorola's Electro Thermal LDMOS transistor in microwave power amplifier design process is a viable solution for common-source amplifier applications in high power base stations. The MET-LDMOS met the stability requirements for the specified frequency range without a stability-improvement model. The power gain of the amplifier circuit was improved through proper microwave matching design using input/output-matching techniques. The gain and efficiency of the amplifier improve approximately 4dB and 7.27% respectively. The gain value is roughly .89 dB higher than the maximum gain specified by the MRF21010 data sheet specifications. This work can lead to efficient modeling and development of high power LDMOS transistor implementations in commercial and industry applications.

Behavioral Perspectives on Organizational Change: Practice Adoption, Product Culling, and Technological Search

This dissertation explores the complex process of organizational change, applying a behavioral lens to understand change in processes, products, and search behaviors. Chapter 1 examines new practice adoption, exploring factors that predict the extent to which routines are adopted “as designed” within the organization. Using medical record data obtained from the hospital’s Electronic Health Record (EHR) system I develop a novel measure of the “gap” between routine “as designed” and routine “as realized.” I link this to a survey administered to the hospital’s professional staff following the adoption of a new EHR system and find that beliefs about the expected impact of the change shape fidelity of the adopted practice to its design. This relationship is more pronounced in care units with experienced professionals and less pronounced when the care unit includes departmental leadership. This research offers new insights into the determinants of routine change in organizations, in particular suggesting the beliefs held by rank-and-file members of an organization are critical in new routine adoption. Chapter 2 explores changes to products, specifically examining culling behaviors in the mobile device industry. Using a panel of quarterly mobile device sales in Germany from 2004-2009, this chapter suggests that the organization’s response to performance feedback is conditional upon the degree to which decisions are centralized. While much of the research on product exit has pointed to economic drivers or prior experience, these central finding of this chapter—that performance below aspirations decreases the rate of phase-out—suggests that firms seek local solutions when doing poorly, which is consistent with behavioral explanations of organizational action. Chapter 3 uses a novel text analysis approach to examine how the allocation of attention within organizational subunits shapes adaptation in the form of search behaviors in Motorola from 1974-1997. It develops a theory that links organizational attention to search, and the results suggest a trade-off between both attentional specialization and coupling on search scope and depth. Specifically, specialized unit attention to a more narrow set of problems increases search scope but reduces search depth; increased attentional coupling also increases search scope at the cost of depth. This novel approach and these findings help clarify extant research on the behavioral outcomes of attention allocation, which have offered mixed results.

Compulsory licensing of standard-essential patents and injunctive relief as abuse of dominant position in violation of Article 102 TFEU

When a dominant undertaking holding a standard-essential patent uses its exclusive right to the IP to seek injunctions against those wishing to produce either de jure or de facto standard compliant products, it creates a conflict between the exclusive right to the use of the IP on the one hand and the possible abuse of dominance due to the exclusionary conduct on the other. The aim of the thesis is to focus on the issues concerning abuse of dominance in violation of Article 102 TFEU when the holder of the standard-essential patent seeks an injunction against a would-be licensee. The thesis is mainly based on the most recent ECJ case law in Huawei and the Commission’s recent decisions in Samsung and Motorola. The case law in Europe prior to those decisions was mainly focused on the German case law from Orange Book Standard which provided IP holders great leverage due to the almost automatic granting of injunctions against infringers. The ECJ in Huawei set out the requirements for when a de jure standard-essential patent holder would not be violating Article 102 TFEU when seeking an injunction, requiring that negotiations in good faith must take place prior to the seeking of the injunction and that all offers must comply with FRAND terms, thus limiting the scope of case law derived from Orange Book Standard in Germany. The ECJ chose not to follow all of the reasoning the Commission had laid out in Samsung and Motorola which provided a more licensee-friendly approach on the matter, but rather chose a compromise between the IP holder friendly German case law and the Commission’s decisions. However, the ECJ did not disclose how FRAND terms themselves should be interpreted, but rather left it for the national courts to decide. Furthermore, the thesis strongly argues that Huawei did not change the fact that only vertically integrated IP holders who have made a FRAND declaration are subject to the terms laid out in Huawei, thus leaving non-practicing entities such as patent trolls and entities that have not made a FRAND declaration outside its scope. The resulting conclusion from the thesis is that while the ECJ in Huawei presented new exceptional circumstances for when an IP holder could be abusing its dominant position when it seeks an injunction, it still left many more questions answered, such as the meaning of FRAND and whether deception in giving a FRAND declaration is prohibited under Article 102 TFEU or not.

Nokia- The surprising success of textbook wisdom

What is the secret behind Nokia’s phenomenal success in mobile phones? More generally, how to succeed in a turbulent high technology market? Historical and comparative studies bring understanding not only about past phenomena, but also insights about current and coming ones. In this paper we compare Ford and General Motors in the 1920s and 1930s with Motorola and Nokia in the 1980s and 1990s. The insight from this comparison is how reinvention of the product, category, relative to the market incumbent’s market conceptualization, is a recipe for success. Nokia’s success in the 1990s was based on following the guidelines pioneered by General Motors in the 1920s: market segmentation, embracing the latest technological advances, and brand management in the pursuit of consumer repurchases. The article tells how Nokia addresses both GM’s legacy and changes in the business environment. At the end of our paper, we disuss the generalizability of our findings.

Implementación de la señalización DTMF y respuesta interactiva de voz usando radios E&M

El presente trabajo tiene como finalidad el estudio de alternativas de radios que soporten tanto la señalización E&M como DTMF y a partir de ello, lograr que interactúen con servicios de respuesta interactiva de voz. Con radios VHF se puede expandir la cobertura en servicios de comunicación telefónica. Se diseñó un circuito para facilitar la integración de tarjetas E&M y el radio Motorola Pro 3100, utilizándose como un receptor para conectar llamadas de otros radios hacia una planta telefónica conectada a un Router cisco que es una CME o la planta telefónica conectada a una computadora con Elastix. Así un radio que contenga teclado DTMF, puede hacer llamadas hacia las plantas telefónicas como si se tratara de un teléfono y también un teléfono hacer llamadas a los radios, mediante una IVR hacer consultas en una base de datos