Ensuring QoE in contemporary mobile networks for video content distribution

A framework that aims to best utilize the mobile network resources for video applications is presented in this paper. The main contribution of the work proposed is the QoE-driven optimization method that can maintain a desired trade-off between fairness and efficiency in allocating resources in terms of data rates to video streaming users in LTE networks. This method is concerned with the control of the user satisfaction level from the service continuity's point of view and applies appropriate QoE metrics (Pause Intensity and variations) to determine the scheduling strategies in combination with the mechanisms used for adaptive video streaming such as 3GP/MPEG-DASH. The superiority of the proposed algorithms are demonstrated, showing how the resources of a mobile network can be optimally utilized by using quantifiable QoE measurements. This approach can also find the best match between demand and supply in the process of network resource distribution.

Az erősödő állami szerepvállalás értékelése a magyarországi elektronikus hírközlő hálózati fejlesztésekben (Evaluation of the increasingstate’s rolein the electronic communications network development in Hungary)

Az elektronikus hírközlő hálózat rohamszerű fejlesztésének igénye az elektronikus szolgáltatások széles körű elterjedésével az állami döntéshozókat is fejlesztéspolitikai koncepciók kidolgozására és azok végrehajtására ösztönzi. Az (információs) társadalom fejlődése és az ennek alapjául szolgáló infokommunikációs szolgáltatások használata alapvetően függ a szélessávú infrastruktúra fejlesztésétől, az elektronikus hírközlő hálózat elérésének lehetőségétől. Az állami szerepvállalási hajlandóság 2011-től kezdődően jelentősen megnőtt az elektronikus hírközlési területen. Az MVM NET Zrt. megalapítása, a NISZ Zrt. átszervezése, a GOP 3.1.2-es pályázat és a 4. mobilszolgáltató létrehozásának terve mind mutatják a kormányzat erőteljes szándékát a terület fejlesztésére. A tanulmányban bemutatásra kerül, hogy az állam milyen beavatkozási eszközökkel rendelkezik az elektronikus hírközlő hálózat fejlesztésének ösztönzésére. A szerző ezt követően a négy, jelentős állami beavatkozás elemzését végzi el annak vizsgálatára, hogy megfelelő alapozottsággal született-e döntés az állami szerepvállalásról. _____ With the widespread use of the Internet, the need for the rapid development of the digital communication networks has prompted government policy makers also to conceptualize and implement development policy. The advancement of the (information) society and the use of information communication technology as a prerequisite of it are fundamentally determined by the development of broadband infrastructure and whether broadband access to the digital telecommunication network is available. The propensity of the government to play a bigger role in the field of electronical communication has increased significantly from 2011. The setup of MVM NET Zrt. / Hungarian Electricity NET Ltd./, the realignment of NISZ Zrt. / National Info communication Services Company Limited by Shares - NISZ Ltd./, the GOP 3.1.2. tender and the plan to enable a new, i.e. the fourth mobile network operator to enter the market all indicate the robust intention of the government to develop this field. The study shows the tools of government intervention for the incentive of the development of the electronical communication network. Then the author analyses the four main government interventions to examine whether the decision on the role of the state was adequately well-founded.

Introducing mobile edge computing capabilities through distributed 5G Cloud Enabled Small Cells

Current trends in broadband mobile networks are addressed towards the placement of different capabilities at the edge of the mobile network in a centralised way. On one hand, the split of the eNB between baseband processing units and remote radio headers makes it possible to process some of the protocols in centralised premises, likely with virtualised resources. On the other hand, mobile edge computing makes use of processing and storage capabilities close to the air interface in order to deploy optimised services with minimum delay. The confluence of both trends is a hot topic in the definition of future 5G networks. The full centralisation of both technologies in cloud data centres imposes stringent requirements to the fronthaul connections in terms of throughput and latency. Therefore, all those cells with limited network access would not be able to offer these types of services. This paper proposes a solution for these cases, based on the placement of processing and storage capabilities close to the remote units, which is especially well suited for the deployment of clusters of small cells. The proposed cloud-enabled small cells include a highly efficient microserver with a limited set of virtualised resources offered to the cluster of small cells. As a result, a light data centre is created and commonly used for deploying centralised eNB and mobile edge computing functionalities. The paper covers the proposed architecture, with special focus on the integration of both aspects, and possible scenarios of application.

Adaptive Sampling with Mobile Sensor Networks

Mobile sensor networks have unique advantages compared with wireless sensor networks. The mobility enables mobile sensors to flexibly reconfigure themselves to meet sensing requirements. In this dissertation, an adaptive sampling method for mobile sensor networks is presented. Based on the consideration of sensing resource constraints, computing abilities, and onboard energy limitations, the adaptive sampling method follows a down sampling scheme, which could reduce the total number of measurements, and lower sampling cost. Compressive sensing is a recently developed down sampling method, using a small number of randomly distributed measurements for signal reconstruction. However, original signals cannot be reconstructed using condensed measurements, as addressed by Shannon Sampling Theory. Measurements have to be processed under a sparse domain, and convex optimization methods should be applied to reconstruct original signals. Restricted isometry property would guarantee signals can be recovered with little information loss. While compressive sensing could effectively lower sampling cost, signal reconstruction is still a great research challenge. Compressive sensing always collects random measurements, whose information amount cannot be determined in prior. If each measurement is optimized as the most informative measurement, the reconstruction performance can perform much better. Based on the above consideration, this dissertation is focusing on an adaptive sampling approach, which could find the most informative measurements in unknown environments and reconstruct original signals. With mobile sensors, measurements are collect sequentially, giving the chance to uniquely optimize each of them. When mobile sensors are about to collect a new measurement from the surrounding environments, existing information is shared among networked sensors so that each sensor would have a global view of the entire environment. Shared information is analyzed under Haar Wavelet domain, under which most nature signals appear sparse, to infer a model of the environments. The most informative measurements can be determined by optimizing model parameters. As a result, all the measurements collected by the mobile sensor network are the most informative measurements given existing information, and a perfect reconstruction would be expected. To present the adaptive sampling method, a series of research issues will be addressed, including measurement evaluation and collection, mobile network establishment, data fusion, sensor motion, signal reconstruction, etc. Two dimensional scalar field will be reconstructed using the method proposed. Both single mobile sensors and mobile sensor networks will be deployed in the environment, and reconstruction performance of both will be compared.In addition, a particular mobile sensor, a quadrotor UAV is developed, so that the adaptive sampling method can be used in three dimensional scenarios.

Experimental studies of wireless communication and GNSS kinematic positioning performance in high-mobility vehicle environments

In order to support intelligent transportation system (ITS) road safety applications such as collision avoidance, lane departure warnings and lane keeping, Global Navigation Satellite Systems (GNSS) based vehicle positioning system has to provide lane-level (0.5 to 1 m) or even in-lane-level (0.1 to 0.3 m) accurate and reliable positioning information to vehicle users. However, current vehicle navigation systems equipped with a single frequency GPS receiver can only provide road-level accuracy at 5-10 meters. The positioning accuracy can be improved to sub-meter or higher with the augmented GNSS techniques such as Real Time Kinematic (RTK) and Precise Point Positioning (PPP) which have been traditionally used in land surveying and or in slowly moving environment. In these techniques, GNSS corrections data generated from a local or regional or global network of GNSS ground stations are broadcast to the users via various communication data links, mostly 3G cellular networks and communication satellites. This research aimed to investigate the precise positioning system performances when operating in the high mobility environments. This involves evaluation of the performances of both RTK and PPP techniques using: i) the state-of-art dual frequency GPS receiver; and ii) low-cost single frequency GNSS receiver. Additionally, this research evaluates the effectiveness of several operational strategies in reducing the load on data communication networks due to correction data transmission, which may be problematic for the future wide-area ITS services deployment. These strategies include the use of different data transmission protocols, different correction data format standards, and correction data transmission at the less-frequent interval. A series of field experiments were designed and conducted for each research task. Firstly, the performances of RTK and PPP techniques were evaluated in both static and kinematic (highway with speed exceed 80km) experiments. RTK solutions achieved the RMS precision of 0.09 to 0.2 meter accuracy in static and 0.2 to 0.3 meter in kinematic tests, while PPP reported 0.5 to 1.5 meters in static and 1 to 1.8 meter in kinematic tests by using the RTKlib software. These RMS precision values could be further improved if the better RTK and PPP algorithms are adopted. The tests results also showed that RTK may be more suitable in the lane-level accuracy vehicle positioning. The professional grade (dual frequency) and mass-market grade (single frequency) GNSS receivers were tested for their performance using RTK in static and kinematic modes. The analysis has shown that mass-market grade receivers provide the good solution continuity, although the overall positioning accuracy is worse than the professional grade receivers. In an attempt to reduce the load on data communication network, we firstly evaluate the use of different correction data format standards, namely RTCM version 2.x and RTCM version 3.0 format. A 24 hours transmission test was conducted to compare the network throughput. The results have shown that 66% of network throughput reduction can be achieved by using the newer RTCM version 3.0, comparing to the older RTCM version 2.x format. Secondly, experiments were conducted to examine the use of two data transmission protocols, TCP and UDP, for correction data transmission through the Telstra 3G cellular network. The performance of each transmission method was analysed in terms of packet transmission latency, packet dropout, packet throughput, packet retransmission rate etc. The overall network throughput and latency of UDP data transmission are 76.5% and 83.6% of TCP data transmission, while the overall accuracy of positioning solutions remains in the same level. Additionally, due to the nature of UDP transmission, it is also found that 0.17% of UDP packets were lost during the kinematic tests, but this loss doesn't lead to significant reduction of the quality of positioning results. The experimental results from the static and the kinematic field tests have also shown that the mobile network communication may be blocked for a couple of seconds, but the positioning solutions can be kept at the required accuracy level by setting of the Age of Differential. Finally, we investigate the effects of using less-frequent correction data (transmitted at 1, 5, 10, 15, 20, 30 and 60 seconds interval) on the precise positioning system. As the time interval increasing, the percentage of ambiguity fixed solutions gradually decreases, while the positioning error increases from 0.1 to 0.5 meter. The results showed the position accuracy could still be kept at the in-lane-level (0.1 to 0.3 m) when using up to 20 seconds interval correction data transmission.

Evaluation of Trippple : a field analysis

This paper illustrates a field research performed with a team of experts involved in the evaluation of Trippple, a system aimed at supporting the different phases of a tourist trip, in order to provide feedback and insights, both on the functionalities already implemented (that at the time of evaluation were available only as early and very unstable prototypes), and on the functionalities still to be implemented. We show how the involvement of professionals helped to focus on challenging aspects, instead of less important, cosmetic, issues and resulted profitable in terms of early feedback, issues spotted, and improvements suggested

Location Area Planning Using Simulated Annealing With A New Solution Representation

Location area planning problem is to partition the cellular/mobile network into location areas with the objective of minimizing the total cost. This partitioning problem is a difficult combinatorial optimization problem. In this paper, we use the simulated annealing with a new solution representation. In our method, we can automatically generate different number of location areas using Compact Index (CI) to obtain the optimal/best partitions. We compare the results obtained in our method with the earlier results available in literature. We show that our methodology is able to perform better than earlier methods.

Herramienta software para el análisis de rendimiento de redes 4G

[ES]El objetivo de este proyecto ha sido desarrollar una herramienta software que permita medir el rendimiento de redes con tecnología móvil 4G, también conocida como LTE. Para ello se ha creado un sistema software que está compuesto por una aplicación móvil y un servidor de aplicaciones. El sistema en conjunto realiza la función de recoger indicadores de calidad de la red móvil de diversa índole, que posteriormente son procesados utilizando herramientas software matemáticas, para así obtener gráficas y mapas que permiten analizar la situación y el rendimiento de una red 4G concreta. El desarrollo del software ha llegado a nivel de prototipo y se han realizado pruebas reales con él obteniendo resultados positivos de funcionamiento.

Desarrollo de cliente OMA PoC para Android

[ES]Se presenta el siguiente proyecto de desarrollo, enfocado en el contexto de suplir las necesidades de los equipos de emergencias. Actualmente los equipos de emergencias, hacen uso de walkie talkies para comunicarse entre sí, es decir, hacen uso de la tecnología PTT (Push-to-talk). Es una comunicación unidireccional de un usuario a muchos, de manera que pueden transmitir la información necesaria a varios usuarios simultáneamente. Por otra parte, la comunicación mediante esta tecnología hace posible que sea en tiempo real sin prácticamente ningún retraso. Sin embargo el uso de esta forma de comunicación trae consigo algunos inconvenientes. Por ejemplo, los dispositivos tienen un rango de alcance de transmisión-recepción limitado. Además la banda de frecuencia para poder comunicarse debe ser reservada a fin de evitar posibles problemas de comunicación debido a que el canal estuviera ocupado por otros usuarios, posibles interferencias, etc. La reserva de este rango de frecuencia, supone un coste añadido para el uso de esta tecnología. Con el desarrollo de las redes móviles que ofrecen grandes velocidades de transmisión, se hace posible el uso de la tecnología PTT mediante la red móvil existente. De esta manera, surge el siguiente proyecto de desarrollo de una aplicación móvil Android, como cliente que haga uso de la tecnología PTT sobre la red móvil PoC (Push-to-talk Over Cellular).

Analysis of channel quality reporting mechanisms and their impact into 4G and beyond technologies

206 p.

System architecture and deployment scenarios for SESAME: Small cEllS coordinAtion for Multi-tenancy and Edge services

The surge of the Internet traffic with exabytes of data flowing over operators mobile networks has created the need to rethink the paradigms behind the design of the mobile network architecture. The inadequacy of the 4G UMTS Long term Evolution (LTE) and even of its advanced version LTE-A is evident, considering that the traffic will be extremely heterogeneous in the near future and ranging from 4K resolution TV to machine-type communications. To keep up with these changes, academia, industries and EU institutions have now engaged in the quest for new 5G technology. In this paper we present the innovative system design, concepts and visions developed by the 5G PPP H2020 project SESAME (Small cEllS coordinAtion for Multi-tenancy and Edge services). The innovation of SESAME is manifold: i) combine the key 5G small cells with cloud technology, ii) promote and develop the concept of Small Cellsas- a-Service (SCaaS), iii) bring computing and storage power at the mobile network edge through the development of nonx86 ARM technology enabled micro-servers, and iv) address a large number of scenarios and use cases applying mobile edge computing. Topics:

Análise de desempenho do protocolo TCP em Redes LTE.

O crescimento dos serviços de banda-larga em redes de comunicações móveis tem provocado uma demanda por dados cada vez mais rápidos e de qualidade. A tecnologia de redes móveis chamada LTE (Long Term Evolution) ou quarta geração (4G) surgiu com o objetivo de atender esta demanda por acesso sem fio a serviços, como acesso à Internet, jogos online, VoIP e vídeo conferência. O LTE faz parte das especificações do 3GPP releases 8 e 9, operando numa rede totalmente IP, provendo taxas de transmissão superiores a 100 Mbps (DL), 50 Mbps (UL), baixa latência (10 ms) e compatibilidade com as versões anteriores de redes móveis, 2G (GSM/EDGE) e 3G (UMTS/HSPA). O protocolo TCP desenvolvido para operar em redes cabeadas, apresenta baixo desempenho sobre canais sem fio, como redes móveis celulares, devido principalmente às características de desvanecimento seletivo, sombreamento e às altas taxas de erros provenientes da interface aérea. Como todas as perdas são interpretadas como causadas por congestionamento, o desempenho do protocolo é ruim. O objetivo desta dissertação é avaliar o desempenho de vários tipos de protocolo TCP através de simulações, sob a influência de interferência nos canais entre o terminal móvel (UE User Equipment) e um servidor remoto. Para isto utilizou-se o software NS3 (Network Simulator versão 3) e os protocolos TCP Westwood Plus, New Reno, Reno e Tahoe. Os resultados obtidos nos testes mostram que o protocolo TCP Westwood Plus possui um desempenho melhor que os outros. Os protocolos TCP New Reno e Reno tiveram desempenho muito semelhante devido ao modelo de interferência utilizada ter uma distribuição uniforme e, com isso, a possibilidade de perdas de bits consecutivos é baixa em uma mesma janela de transmissão. O TCP Tahoe, como era de se esperar, apresentou o pior desempenho dentre todos, pois o mesmo não possui o mecanismo de fast recovery e sua janela de congestionamento volta sempre para um segmento após o timeout. Observou-se ainda que o atraso tem grande importância no desempenho dos protocolos TCP, mas até do que a largura de banda dos links de acesso e de backbone, uma vez que, no cenário testado, o gargalo estava presente na interface aérea. As simulações com erros na interface aérea, introduzido com o script de fading (desvanecimento) do NS3, mostraram que o modo RLC AM (com reconhecimento) tem um desempenho melhor para aplicações de transferência de arquivos em ambientes ruidosos do que o modo RLC UM sem reconhecimento.

Optimização da lista de células vizinhas em redes LTE

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia de Electrónica e Telecomunicações

Performance improvement of multiple Connections in AODV with the concern of Node bandwidth

Mobile Ad-hoc Networks (MANETS) consists of a collection of mobile nodes without having a central coordination. In MANET, node mobility and dynamic topology play an important role in the performance. MANET provide a solution for network connection at anywhere and at any time. The major features of MANET are quick set up, self organization and self maintenance. Routing is a major challenge in MANET due to it’s dynamic topology and high mobility. Several routing algorithms have been developed for routing. This paper studies the AODV protocol and how AODV is performed under multiple connections in the network. Several issues have been identified. The bandwidth is recognized as the prominent factor reducing the performance of the network. This paper gives an improvement of normal AODV for simultaneous multiple connections under the consideration of bandwidth of node.

Energy Optimized Secure Routing Protocol for Wireless Sensor Networks

The evolution of wireless sensor network technology has enabled us to develop advanced systems for real time monitoring. In the present scenario wireless sensor networks are increasingly being used for precision agriculture. The advantages of using wireless sensor networks in agriculture are distributed data collection and monitoring, monitor and control of climate, irrigation and nutrient supply. Hence decreasing the cost of production and increasing the efficiency of production. This paper describes the security issues related to wireless sensor networks and suggests some techniques for achieving system security. This paper also discusses a protocol that can be adopted for increasing the security of the transmitted data