Comportamento dos óxidos de ferro da fração argila e do fósforo adsorvido, em diferentes sistemas de colheita de cana-de-açúcar

In agriculture, the search for higher crop yields based on sustainable soil management has led to a gradual pursuit of knowledge of the variables related to production systems. The identification of the causes of variability of these properties has become a part of strategic planning in the sugar and ethanol industry. This study investigated the spatial variability of iron oxides in the clay fraction and its relationship to soil physical and chemical properties in different sugarcane cultivation systems in the region of Ribeirão Preto, São Paulo State. Two 1-ha plots were outlined in areas with mechanical and manual harvesting systems. Soil samples were taken at 126 points from the 0.00-0.25 m layer in both areas. The mineralogical and chemical data were subjected to geostatistical analyses, to determine the spatial dependence, semivariograms and kriging maps of the properties. To analyze the correlation between the parameters cross-semivariograms were constructed. The spatial variability of chemical properties was greater in areas with mechanical harvesting than burnt harvesting (manual harvesting), whereas the range of the mineralogical properties was largest in the area of green-harvested sugarcane. The properties organic matter, mean crystal diameter goethite had a negatively spatial correlation, while clay was positive correlated with P sorption in the two sugarcane harvest systems.

Iron oxides as proxies for characterizing anisotropy in soil CO2 emission in sugarcane areas under green harvest

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Adsorção de cádmio em Latossolos sob vegetação de mata nativa e cultivados

Heavy metals are found naturally in soils at low concentrations, but their content may be increased by human activity, making them one of the barriers in management of tropical soils. These chemical elements can be found in the composition of organic and inorganic fertilizers, insecticides, fungicides, mine tailings, and urban waste, and may cause serious damage to the environment and human health. Thus, adsorption studies are essential in assessing the behavior of heavy metals in the soil. The objective of this study was to evaluate the influence of soil chemical, particle size, and mineralogical properties on adsorption of cadmium (Cd), evaluated by Langmuir and Freundlich models, in Latossolos (Oxisols) with or without human activity. Soil samples were collected from the surface layer, 0.00-0.20 m, and chemical, particle size, and mineralogical analyzes were performed. In the adsorption study, concentrations of 0, 5, 25, 50, 100, 200, 300, and 400 mu g L-1 of Cd were used in the form of Cd(NO3)(2). The empirical mathematical models of Langmuir and Freundlich were used for construction of adsorption isotherms. Data were analyzed by means of multivariate statistical techniques, Cluster Analysis and Principal Component Analysis. The data from the adsorption experiment showed a good fit to the Langmuir and Freundlich models. Soils with a lower goethite/hematite ratio and greater cation exchange capacity and pH, showed higher maximum adsorption capacity of Cd.

CHARACTERIZATION OF REGOSOLS IN THE SEMIARID REGION OF PERNAMBUCO, BRAZIL

CHARACTERIZATION OF REGOSOLS IN THE SEMIARID REGION OF PERNAMBUCO, BRAZIL Studies on soil characterization in unexplored regions, besides the generation of data banks for the soil classes of the country, also produce scientific information about soil properties, important for the development of good management practices and sustainable land use. One of the main soil classes in the semiarid region of Pernambuco State, the Regosols, cover about 27 % of the state area, and are used mainly for family agriculture. Due to different geological and climatic aspects Regosols with different chemical, physical and mineralogical properties are found in Pernambuco, which were characterized for the semiarid region of the State. Five Regosol profiles were selected in different regions of the State (P1=Sao Caetano; P2=Lagoa do Ouro; P3=Caetes; P4=Sao Joao; P5=Parnamirim). The soils were morphologically characterized and samples collected from all horizons and the bedrock. Routine physical and chemical analyses were carried out for soil classification of all samples and mineralogical analyses of the coarse fractions (gravel and sand) by optical microscopy and of the silt and clay fractions by X ray diffraction (XRD), as well as petrographic analyses of the rock samples. The results showed similarities between the soils, with a low degree of pedogenetic development, varying from medium to very deep, with the horizon sequence A-AC-C-Cr and a sandy to sandy loam texture. In the deeper layers of two profiles (P1 and P5), a solodic character was observed. Organic matter and available phosphorus content were low in all studied soils. Despite the low levels of exchangeable cations, all soil profiles showed high base saturation. The mineralogical composition of gravel, sand and silt fractions consisted, essentially, of quartz, followed by feldspars and mica, supporting the results of the petrographic analysis of the bedrock. Kaolinite was the main clay mineral in all studied profiles and horizons, indicating an important monosialitization process in autochthonous soils of a typical semiarid region. In soil profile P2, at a lower landscape position, smectite minerals were observed, with mixing phases of montmorillonite, beidelite or nontronite, indentified by the Greene-Kelly test in the DRX analysis.

BENEFICIATION OF HIGH-MgO SEDIMENTARY PHOSPHATE ORES

Dolomite [CaMg(CO3)2] is an intolerable impurity in phosphate ores due to its MgO content. Traditionally, the Florida phosphate industry has avoided mining high-MgO phosphate reserves due to the lack of an economically viable process for removal of dolomite. However, as the high grade phosphate reserves become depleted, more emphasis is being put on the development of a cost effective method for separating dolomite from high-MgO phosphate ores. In general, the phosphate industry demands a phosphate concentrate containing less than 1%MgO. Dolomite impurities have mineralogical properties that are very similar to the desired phosphate minerals (francolite), making the separation of the two minerals very difficult. Magnesium is primarily found as distinct dolomite-rich pebbles, very fine dolomite inclusions in predominately francolite pebbles, and magnesium substituted into the francolite structure. Jigging is a gravity separation process that attempts to take advantage of the density difference between the dolomite and francolite pebbles. A unique laboratory scale jig was designed and built at Michigan Tech for this study. Through a series of tests it was found that a pulsation rate of 200 pulse/minute, a stroke length of 1 inch, a water addition rate of 0.5gpm, and alumina ragging balls were optimum for this study. To investigate the feasibility of jigging for the removal of dolomite from phosphate ore, two high-MgO phosphate ores were tested using optimized jigging parameters: (1) Plant #1 was sized to 4.00x0.85mm and contained 1.55%MgO; (2) Plant #2 was sized to 3.40mmx0.85mm and contained 3.07% MgO. A sample from each plant was visually separated by hand into dolomite and francolite rich fractions, which were then analyzed to determine the minimum achievable MgO levels. For Plant #1 phosphate ore, a concentrate containing 0.89%MgO was achieved at a recovery of 32.0%BPL. For Plant #2, a phosphate concentrate containing 1.38%MgO was achieved at a recovery of 74.7%BPL. Minimum achievable MgO levels were determined to be 0.53%MgO for Plant #1 and 1.15%MgO for Plant #2.

Grain-size analyses and bulk chemistry determined in surface sediment samples along the Chilean continental margin in the Southeast Pacific Ocean

Physical, chemical, and mineralogical properties of a set of surface sediment samples collected along the Chilean continental slope (21-44°S) are used to characterise present-day sedimentation patterns and sediment provenance on the Chilean margin. Despite the presence of several exceptional latitudinal gradients in relief, oceanography, tectonic evolution, volcanic activity and onshore geology, the present-day input of terrigenous sediments to the Chilean continental margin appears to be mainly controlled by precipitation gradients, and source-rock composition in the hinterland. General trends in grain size denote a southward decrease in median grain-size of the terrigenous (Corganic, CaCO3 and Opal-free) fraction, which is interpreted as a shift from aeolian to fluvial sedimentation. This interpretation is supported by previous observations of southward increasing bulk sedimentation rates. North-south trends in sediment bulk chemistry are best recognised in the iron (Fe) and titanium (Ti) vs. potassium (K) and aluminium (Al) ratios of the sediments that most likely reflect the contribution of source rocks from the Andean volcanic arc. These ratios are high in the northernmost part, abruptly decrease at 25°S, and then more or less constantly increase southwards to a maximum at ~40°S.

Valoración de Indicadores de calidad para el diseño e implementación de tecnologías de manejo en Luvisoles de la zona norte de la provincia de Las Tunas, Cuba

La calidad del suelo es una herramienta de evaluación que puede facilitar la adaptación de prácticas de manejo que promuevan sistemas agropecuarios sostenibles. La investigación de este trabajo se inició con un diagnóstico participativo en 12 comunidades rurales de la provincia de Las Tunas en el año 2009 en el cual los productores identificaron los puntos críticos de calidad de los suelos de la región y sirvieron de punta de partida para seleccionar las variables físicas, químicas y biológicas a determinar en cinco sistemas de uso agropecuario (arboleda, pasto natural, pasto cultivado y dos sistemas silvopastoriles) en la zona La Veguita, municipio Las Tunas. El sistema arboleda se utilizó como referencia de las propiedades naturales del suelo. El pasto natural se distingue por el desarrollo de especies de baja productividad, sin embargo el pasto cultivado está representado por Pennisetum purpureum vc CUBA CT-115, y constituye una contribución a la tecnología de bancos de biomasa, para utilizarse en el pastoreo durante la seca. Los sistemas silvopastoriles están representados por Leucaena leucocephala Lam. en franjas y Panicum maximun vc. Likoni, los que se diferencian en su diseño, manejo y propiedades mineralógicas. El objetivo fundamental fue valorar indicadores de calidad de los suelos Luvisoles háplicos sobre granitoides, para diseñar e implementar tecnologías de manejo que permitan incrementar la capacidad agroproductiva de los suelos. Mediante el análisis de componentes principales se obtuvo un conjunto mínimo de indicadores físicos, químicos y biológicos que proporcionaron información útil referente a los procesos edáficos y se integraron para determinar un índice de calidad. En el sistema de uso, caracterizado por el pasto cultivado (Pennisetum purpureum) se estableció, en parcelas experimentales, un ensayo de corta duración, en el que se comparó el laboreo tradicional y el laboreo sin inversión del prisma, con y sin aplicación de compost. En ambos sistemas de labranza se evaluó el desarrollo del cultivo e indicadores de calidad del suelo. Los resultados mostraron que del conjunto de indicadores edáficos estudiados se seleccionaron 6 en los que la capacidad de intercambio catiónico, materia orgánica, potasio intercambiable, contenido de arena, densidad aparente y biomasa de lombrices explicaron la mayor variabilidad y sirvieron de base para evaluar la calidad de estos suelos. Se establecieron valores umbrales de referencia de indicadores de calidad, que permitirán evaluar y monitorear los sistemas de uso y manejo de la región. El sistema Silvopastoril 2 resultó el de mayor índice de calidad de los suelos tomando como referencia la arboleda por su condición natural. El manejo silvopastoril influyó predominantemente en mejores resultados productivos pero las características edáficas principalmente físicas, deben definir su diseño y manejo. El sistema de pastos cultivados con Pennisetum purpureum vc CUBA CT 115, alcanzó la mayor acumulación de carbono orgánico, sin embargo, el manejo limitó su calidad física y el funcionamiento productivo del sistema. De manera general los sistemas de uso no garantizan un índice de la calidad del suelo, puesto que se ve afectado por las propiedades edáficas y las prácticas de manejo. En el ámbito biológico, las lombrices constituyeron los organismos más numerosos con predominio en los sistemas silvopastoriles y arboleda. Los valores superiores de densidad y biomasa de oligoquetos y mayor diversidad de otros individuos de la macrofauna, indican que la presencia de árboles en los pastizales de gramínea potencia y diversifican las comunidades de macroinvertebrados del suelo. El sistema de labranza sin inversión del prisma propicia una mejor calidad física del suelo, manteniendo el carbono e incrementando los rendimientos del Penisetum purpureum cv CUBA CT 115. La labranza tradicional, a base de aradura y grada, afecta a los contenidos de materia orgánica en el corto plazo y mantiene capas compactas en el horizonte subyacente, además influye desfavorablemente al flujo del aire, agua y al desarrollo radical de los pastos. La aplicación de compost favoreció mejores resultados productivos en ambas tecnologías de manejo. Los resultados alcanzados recomiendan la implantación de tecnologías de manejo conservacionistas y la aplicación de materiales orgánicos que restituyan los elementos nutricionales requeridos por los pastos, por lo que no se justifica la continuidad del uso de prácticas tradicionales de laboreo con inversión del prisma que se realizan actualmente. ABSTRACT The soil quality is an assessment tool, which could facilitate the adaptation of management practices that promote sustainable agricultural systems. The present investigation was carried out with a participatory diagnostic in twelve rural communities from Las Tunas province in 2009, in which producers identified the critical soil quality points of region and served as a starting point to select the physical, chemical and biological variables, in order to determine on five agricultural used systems (grove, natural grass, cultivated grass and two silvopastoral systems) in La Veguita zone from municipality Las Tunas. The system grove was used as reference of natural soil properties. The natural grass is distinguished by the development of low-productivity species, however the cultivated grass is represented by Pennisetum purpureum vc CUBA CT-115, and is a contribution to the biomass banks technology, in order to use in grazing during the dry season. The silvopastoral systems are represented by Leucaena leucocephala Lam. in stripes and Panicum maximum cv. Likoni, which differ in their design, handling and mineralogical properties. The main aim of this study was to assess the quality indicators for haplic Luvisols on granitoids for designing and implementing management technologies in order to increase the agroproductive capacity of soils. A minimal set of physical, chemical and biological indicators by Principal Component Analysis was obtained, which provided some useful information regarding soil processes and their integration for determining an index of quality. In the use system, characterized for the cultivated grass (Pennisetum purpureum) a short term assay in experimental plots was established, where the traditional and prism without inversion tillage were compared with and without compost application. In both tillage systems were evaluated the crop development and soil quality indicators. The results showed that the studied soil indicators set, six were selected, specifically the ones with exchangeable cationic capacity, organic matter, interchangeable potassium, sand content, bulk density and earthworm biomass, which explained the higher variability and served as the basis for evaluating the soil quality. The Reference threshold values of quality indicators for evaluating and monitoring the use and management systems from the region were established. The silvopastoral system 2 had the highest quality soil index, taking of reference the grove system for its natural condition. The silvopastoral management influenced on better productive results, but the soil characteristics, particularly the physical properties to be defined its design and management. However, the cultivated grass system with Pennisetum purpureum vc CUBA CT 115, reached the greatest accumulation of organic carbon. However, the management limited its physical quality and productive performance of the system. In addition, the use systems do not guarantee an index of soil quality, since it is affected by soil properties and management practices. From the biological aspect, the earthworms are the most numerous organisms on the silvopastoral systems and grove. The higher values of oligochaetes biomass and density and the greater diversity of other organisms from macrofauna indicate that the tree presence on the pasture grasses allows enhancing and diversifying soil macro invertebrate communities. The non-inversion prism tillage system provides a better physical quality of soil, maintaining the carbon content and increasing the yields of Penisetum purpureum vc CUBA CT 115. The traditional tillage, using the plowing and harrowing affects the organic matter content in a short term and keeps on compact layers of underlying horizon, and adversely affects the air and water flow, and pasture radical development. The compost application favored the best production results in both management technologies. The results obtained recommend the implementation of conservation management technologies and the application of organic materials that restore the nutritional elements required by the pasture, so it does not justify the continued use of traditional tillage practices with prism investment that are currently being made.

Long-range transport of mineral dust in the global atmosphere: Impact of African dust on the environment of the southeastern United States

Soil dust is a major constituent of airborne particles in the global atmosphere. Dust plumes frequently cover huge areas of the earth; they are one of the most prominent and commonly visible features in satellite imagery. Dust is believed to play a role in many biogeochemical processes, but the importance of dust in these processes is not well understood because of the dearth of information about the global distribution of dust and its physical, chemical, and mineralogical properties. This paper describes some features of the large-scale distribution of dust and identifies some of the geological characteristics of important source areas. The transport of dust from North Africa is presented as an example of possible long-range dust effects, and the impact of African dust on environmental processes in the western North Atlantic and the southeastern United States is assessed. Dust transported over long distances usually has a mass median diameter <10 μm. Small wind-borne soil particles show signs of extensive weathering; consequently, the physical and chemical properties of the particles will greatly depend on the weathering history in the source region and on the subsequent modifications that occur during transit in the atmosphere (typically a period of a week or more). To fully understand the role of dust in the environment and in human health, mineralogists will have to work closely with scientists in other disciplines to characterize the properties of mineral particles as an ensemble and as individual particles especially with regard to surface characteristics.

(Table 1, page 400) Metal content of different manganese nodules from cruise VA-04 (R/V Valdivia) in the Pacific Ocean

Deep sea manganese nodules are considered as important natural resources for the future because of their Ni, Cu and Co contents. Their different shapes cannot be correlated clearly with their chemical composition. Surface constitution, however, can be associated with the metal contents. A classification of the nodules is suggested on the basis of these results. The iron content of the nodules strikingly shows relations to the physical properties (e.g. density and porosity). The method of density-measurement is the reason for this covariance. The investigation of freeze-dried nodular substance does not give this result. The Fe-rich nodules lose more hydration water than the Fe-poor ones during heat drying. The reason for this effect is the different crystallinity, respectively the particle size. The mean particle size is calculated on the basis of geometrical models. The X-ray-diffraction analysis proves the variation of crystallinity in connection with the Fe-content, too. The internal nodular textures also show characteristic distinctions.

Conservação e restauro de azulejo: metodologias de intervenção vs indicadores de compatibilidade

A escassez de parâmetros técnicos e científicos e o caráter subjetivo que em regra preside à escolha de determinado material, produto ou técnica suscitaram o interesse pelo presente tema onde se procurou aumentar as ferramentas de análise e de apoio à decisão em intervenções de conservação do património azulejar. Procurou compreender-se o azulejo a nível histórico, estético, técnico e material, estudando-o do ponto de vista físico, químico e mineralógico. Comparando o azulejo com as réplicas produzidas para intervenções de conservação e restauro estudadas, concluiu-se que as suas composições, química e mineralógica, são diferentes, embora não se verifiquem tantas dissemelhanças ao nível das propriedades físicas. As linhas orientadoras da conservação e restauro de azulejo foram lançadas por Santos Simões a partir dos anos 40 do séc. XX e, desde então, foi-se desenvolvendo um pouco à margem das restantes áreas de especialidade, mesmo ao nível do ensino. Os resultados do inquérito internacional junto dos profissionais que trabalham em conservação e restauro de azulejo in situ corroboram de certo modo este facto e, simultaneamente, permitem uma apreensão da situação atual. Constatou-se uma quase total ausência de documentação sobre intervenções realizadas, mas a análise de casos de estudo e de relatórios permitiu uma primeira sistematização da informação disponível segundo os materiais correntemente utilizados. Procedeu-se a uma identificação e tipificação de patologias decorrentes das intervenções procurando entender qual o papel que tiveram os materiais utilizados e as técnicas de intervenção no desempenho das intervenções. Os processos de reintegração volumétrica e cromática mereceram uma maior atenção, procedendo-se à simulação de todo o sistema, em contexto laboratorial, com base nos materiais correntemente utilizados. Os resultados revelam comportamento diferenciado dos materiais de origem orgânica e inorgânica, evidenciando estes últimos uma maior compatibilidade com o azulejo, mas um pior desempenho a médio/longo prazo. O reconhecimento das soluções mais ou menos compatíveis permitiu delinear uma metodologia de avaliação da compatibilidade, da eficácia e do desempenho dos materiais e das técnicas utilizadas, contribuindo também para a definição de algumas recomendações e de critérios de atuação; Abstract The lack of information found, when selecting a material, product or technique, to apply on a specific conservation treatment contributed to the interest on this topic. The historical, aesthetic and technical characteristics of the azulejo was researched by studying their physical, chemical and mineralogical properties. Comparing original azulejos with the replicas produced for conservation treatments studied, it was concluded that the chemical and mineralogical composition is different, although there are less dissimilarities in terms of physical properties. The guidelines for conservation and restoration were launched by Santos Simões in the 40s and since then, it has been developing a bit on the sidelines of the remaining areas of expertise, even at an educational level. The results of an international survey, near professionals working in conservation and restoration of azulejo in situ, corroborate this fact and simultaneously allow an insight of the current situation. It was found an almost complete lack of technical documentation about previous conservation interventions, but the analysis of existent case studies and intervention reports permitted a systematization of the available information, also considering the materials commonly used. The identification and characterization of damages resulting from interventions, was performed trying to establish a correlation with the materials used and intervention techniques. The attention focused on the study of the infills and chromatic reintegration and a simulation of the entire system was developed, in a laboratory context, on the basis of commonly used materials. The results reveal a distinct behavior between the organic and inorganic materials, showing the latter greater compatibility with the azulejos but a worse medium/long-term performance. The recognition of more or less compatible solutions allowed to outline a methodology to evaluate the compatibility, efficiency and performance of materials and techniques used, also contributing to define some recommendations and action criteria.

Performance of concrete incorporating amorphous silica residue and biomass fly ash

L'industrie du ciment est l'une des principales sources d'émission de dioxyde de carbone. L'industrie mondiale du ciment contribue à environ 7% des émissions de gaz à effet de serre dans l'atmosphère. Afin d'aborder les effets environnementaux associés à la fabrication de ciment exploitant en permanence les ressources naturelles, il est nécessaire de développer des liants alternatifs pour fabriquer du béton durable. Ainsi, de nombreux sous-produits industriels ont été utilisés pour remplacer partiellement le ciment dans le béton afin de générer plus d'économie et de durabilité. La performance d'un additif de ciment est dans la cinétique d'hydratation et de la synergie entre les additions et de ciment Portland. Dans ce projet, deux sous-produits industriels sont étudiés comme des matériaux cimentaires alternatifs: le résidu de silice amorphe (RSA) et les cendres des boues de désencrage. Le RSA est un sous-produit de la production de magnésium provenant de l'Alliance Magnésium des villes d'Asbestos et Thedford Mines, et les cendres des boues de désencrage est un sous-produit de la combustion des boues de désencrage, l'écorce et les résidus de bois dans le système à lit fluidisé de l'usine de Brompton située près de Sherbrooke, Québec, Canada. Récemment, les cendres des boues de désencrage ont été utilisées comme des matériaux cimentaires alternatifs. L'utilisation de ces cendres comme matériau cimentaire dans la fabrication du béton conduit à réduire la qualité des bétons. Ces problèmes sont causés par des produits d'hydratation perturbateurs des cendres volantes de la biomasse quand ces cendres sont partiellement mélangées avec du ciment dans la fabrication du béton. Le processus de pré-mouillage de la cendre de boue de désencrage avant la fabrication du béton réduit les produits d'hydratation perturbateurs et par conséquent les propriétés mécaniques du béton sont améliorées. Les approches pour étudier la cendre de boue de désencrage dans ce projet sont : 1) caractérisation de cette cendre volante régulière et pré-humidifiée, 2) l'étude de la performance du mortier et du béton incorporant cette cendre volante régulière et pré-humidifiée. Le RSA est un nouveau sous-produit industriel. La haute teneur en silice amorphe en RSA est un excellent potentiel en tant que matériau cimentaire dans le béton. Dans ce projet, l'évaluation des RSA comme matériaux cimentaires alternatifs compose trois étapes. Tout d'abord, la caractérisation par la détermination des propriétés minéralogiques, physiques et chimiques des RSA, ensuite, l'optimisation du taux de remplacement du ciment par le RSA dans le mortier, et enfin l'évaluation du RSA en remplacement partiel du ciment dans différents types de béton dans le système binaire et ternaire. Cette étude a révélé que le béton de haute performance (BHP) incorporant le RSA a montré des propriétés mécaniques et la durabilité, similaire du contrôle. Le RSA a amélioré les propriétés des mécaniques et la durabilité du béton ordinaire (BO). Le béton autoplaçant (BAP) incorporant le RSA est stable, homogène et a montré de bonnes propriétés mécaniques et la durabilité. Le RSA avait une bonne synergie en combinaison de liant ternaire avec d'autres matériaux cimentaires supplémentaires. Cette étude a montré que le RSA peut être utilisé comme nouveaux matériaux cimentaires dans le béton.

Ceramic raw materials from the State of Maranhao, Brazil. Part 1: chemical and mineralogical characterization and technological properties of clays from Sao Luis, Rosario, Pinheiro and Mirinzal

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Ceramic raw materials from the State of Maranhão, Brazil. Part 1: chemical and mineralogical characterization and technological properties of clays from São Luis, Rosário, Pinheiro and Mirinzal

Nesse trabalho, foram caracterizadas algumas argilas coletadas nos municípios de São Luís, Rosário, Pinheiro e Mirinzal. A caracterização foi realizada através dos ensaios de difração de raios X, massa específica real, capacidade de troca de cátions (CTC), área superficial, distribuição granulométrica, análise química, análise térmica (TG-DTA) e limites de Atterberg. Ensaios tecnológicos de retração linear, antes e após a queima, absorção de água e tensão de ruptura a flexão, em três pontos, foram realizados em corpos de prova prensados uniaxialmente a 20 MPa e tratados termicamente em 850, 950, 1050, 1150 e 1250ºC. Os resultados obtidos permitiram identificar duas argilas de queima branca, constituídas de quartzo, caolim, feldspato e anatásio, com excelentes propriedades para uso em cerâmica branca. As restantes são queima vermelha e possuem composição mineralógica de quartzo, caolim, feldspato, montmorilonita, hematita e goetita. Estas últimas apresentaram valores moderados de plasticidade e são adequadas para aplicações em cerâmica vermelha.

Physical-chemical and mineralogical characterization of fine aggregates from construction and demolition waste recycling plants

Construction and demolition waste (CDW) represents around 31% of all waste produced in the European Union. It is today acknowledged that the consumption of raw materials in the construction industry is a non-sustainable activity. It is thus necessary to reduce this consumption, and the volume of CDW dumped, by using this waste as a source of raw materials for the production of recycled aggregates. One potential use of these aggregates is their incorporation in reinforced concrete as a replacement of natural aggregates. A concrete that incorporates these aggregates and still performs well requires them to be fully characterized so that their behaviour within the concrete can be predicted. Coarse recycled aggregates have been studied quite thoroughly, because they are simpler to reintroduce in the market as a by-product, and so has the performance of concrete made with them. This paper describes the main results of research designed to characterize the physical and chemical properties of fine recycled aggregates for concrete production and their relationship with mineralogical composition and preprocessing. The constraints of the incorporation of fine aggregates in reinforced concrete are discussed. It is shown that, unless a developed processing diagram is used, this application is not feasible. (C) 2013 Elsevier Ltd. All rights reserved.