pH, Calcium Ion Release, and Setting Time of an Experimental Mineral Trioxide Aggregate-based Root Canal Sealer

Introduction: An experimental mineral trioxide aggregate sealer (MTAS) has been developed for use as a root canal sealer. The aim of this study was to evaluate the setting time, pH, and calcium ion release of MTAS compared with white Portland cement (CPB-40; Votorantin Cimentos, Camargo Correa SA, Pedro Leopoldo, MG, Brazil), white MTA Angelus (MTA; Angelus, Londrina, PR, Brazil), and AH Plus (Dentsply DeTrey, Konstanz, Germany). Methods: For the evaluation of setting time, each material was analyzed using Gilmore-type needles. Polyethylene tubes with the materials were immersed in distilled water for the measurement of pH (digital pH meter) and calcium release (atomic absorption spectrophotometry). The evaluations were performed at 3, 6, 12, 24, and 48 hours and 7, 14, and 28 days. Data were analyzed by analysis of variance and the Tukey test at 5% significance level. Results: MTAS showed higher calcium release at all experimental periods, a greater increase in pH up to 48 hours and the longest setting time. Conclusions: MTAS presented favorable properties for its indication as a root canal sealer. (J Endod 2011;37:844-846)

Evaluation of the propylene glycol association on some physical and chemical properties of mineral trioxide aggregate

Duarte MAH, Alves de Aguiar K, Zeferino MA, Vivan RR, Ordinola-Zapata R, Tanomaru-Filho M, Weckwerth PH, Kuga MC. Evaluation of the propylene glycol association on some physical and chemical properties of mineral trioxide aggregate. International Endodontic Journal, 45, 565570, 2012. Abstract Aim To evaluate the influence of propylene glycol (PG) on the flowability, setting time, pH and calcium ion release of mineral trioxide aggregate (MTA). Methodology Mineral trioxide aggregate was mixed with different proportions of PG, as follows: group 1: MTA + 100% distilled water (DW); group 2: MTA + 80% DW and 20% PG; group 3: MTA + 50% DW and 50% PG; group 4: MTA + 20% DW and 80% PG; group 5: MTA + 100% PG. The ANSI/ADA No. 57 was followed for evaluating the flowability and the setting time was measured by using ASTM C266-08. For pH and calcium release analyses, 50 acrylic teeth with root-end cavities were filled with the materials (n = 10) and individually immersed in flasks containing 10 mL deionized water. After 3 h, 24 h, 72 h and 168 h, teeth were placed in new flasks and the water in which each specimen was immersed had its pH determined by a pH metre and the calcium release measured by an atomic absorption spectrophotometer with a calcium-specific hollow cathode lamp. Data were analysed by using one-way anova test for global comparison and by using Tukeys test for individual comparisons. Results The highest value of flowability was observed with MTA + 20% DW and 80% PG and the lowest values were found with MTA + 100% DW. They were significantly different compared to the other groups (P < 0.05). The presence of PG did not affect the pH and calcium release. The MTA + 100% PG favoured the highest (P < 0.05) pH and calcium release after 3 h. Increasing the PG proportion interfered (P < 0.05) with the setting time; when used at the volume of 100% setting did not occur. Conclusion The addition of PG to MTA-Angelus increased its setting time, improved flowability and increased the pH and calcium ion release during the initial post-mixing periods. The ratio of 80% DW 20% PG is recommended.

Evaluation of pH and Calcium Ion Release of Root-end Filling Materials Containing Calcium Hydroxide or Mineral Trioxide Aggregate

Introduction: To evaluate calcium ion release and pH of Sealer 26 (S26) (Dentsply, Rio de Janeiro, RJ, Brazil), white mineral trioxide aggregate (MTA), Endo CPM Sealer (CPM1) (EGEO SRL Bajo licencia MTM Argentina SA, Buenos Aires, Argentina), Endo CPM Sealer in a thicker consistency (CPM 2), and zinc oxide and eugenol cement (ZOE). Methods: Material samples (n = 10) were placed in polyethylene tubes and immersed in 10 mL of distilled water. After 3, 6,12,24, and 48 hours and 7,14, and 28 days, the water pH was determined with a pH meter, and calcium release was assessed by atomic absorption spectrophotometry. An empty tube was used as the control group. Results: The control group presented a pH value of 6.9 at all studied periods and did not show the presence of calcium ion. S26 presented greater hydroxyl ion release up to 12 hours (p < 0.05). From 24 hours until 28 days, S26, MTA, CPM1, and CPM2 had similar results. in ail periods, ZOE presented the lowest hydroxyl ion release. CPM1, followed by CPM2, released the most calcium ions until 24 hours (p < 0.05). Between 48 hours and 7 days, CPM1 and CPM2 had the highest release. A greater calcium ion release was observed for CPM2, followed by CPM1 at 14 days and for S26, CPM1, and CPM2 at 28 days. ZOE released the least calcium ions in all periods. Conclusion: Sealer 26, MTA, and Endo CPM sealer at normal or thicker consistency release hydroxyl and calcium ions. Endo CPM sealer may be an alternative as root-end filling material. (J Endod 2009;35:1418-1421)

Exploring potentialities of the HR-CS FAAS technique in the determination of Ni and Pb in mineral waters

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudos sobre a nutrição mineral do sorgo granífero: VIII. efeitos do fósforo

Foi conduzido um experimento, onde foram estudados os efeitos de níveis crescentes de fósforo sobre o crescimento, produção e absorção de nitrogênio, fósforo e potássio por cinco cultivares de sorgo granífero. As plantas foram cultivadas em baldes com 20 litros de solução nutritiva completa ou com fósforo diluído a 1/2, 1/5 e 1/10 da concentração usual. A colheita foi realizada quando as plantas estavam com os grãos maduros, aos 110 dias da emergência. As plantas colhidas foram separadas em raiz, colmo, folhas, raquis e grãos, sendo então secadas e moídas para as análises químicas de nitrogênio, fósforo e potássio. Os resultados obtidos permitiram concluir que, em média, apesar dos níveis de fósforo não afetarem significativamente a produção de matéria seca total, as produções de grãos foram diminuídas nos tratamentos com menos disponibilidade de fósforo, sendo que os diferentes cultivares apresentaram reações diferentes à deficiência do nutriente. Os níveis de fósforo na solução nutritiva tiveram efeito nas quantidades de nitrogênio e fósforo contidos na planta e nos grãos de sorgo granífero, não acontecendo o mesmo em relação a absorção de potássio pela planta. Ainda: os níveis de fósforo tiveram efeito na quantidade de potássio contido nos grãos de sorgo.

Estudos sobre a nutrição mineral do sorgo granífero: IX - efeitos do potássio

Cinco cultivares de sorgo granífero foram cultivados em solução nutritiva, com o objetivo de se estudar os efeitos da deficiência de potássio no crescimento, produção e absorção de nitrogênio, fósforo e potássio. O sorgo foi cultivado em solução nutritiva completa ou com potássio diluído a 1/2, 1/5 e 1/10 da concentração usual, até o final do ciclo, ou seja 110 dias. As plantas foram então colhidas e separa das em raiz, colmo, folhas, raquis e grãos, sendo a seguir secadas e moídas. Foram feitas análises de nitrogênio, fósforo e potássio em cada uma das partes das plantas. Os resultados obtidos permitiram concluir que, em média, os níveis de potássio tiveram efeito apenas na produção dos grãos de sorgo, não afetando a matéria seca produzida das demais partes da planta. Os níveis de potássio tiveram ainda efeito significativo sobre as quantidades de nitrogênio; fósforo e potássio absorvidas pelas plantas; a translocação de nitrogênio para os grãos foi também afetada significativamente.

Crescimento radicular e nutrição mineral da soja em função da calagem e adubação fosfatada

Tanto o cálcio como o fósforo tem importante ação no crescimento de raízes. No presente trabalho foi estudado, em vasos, o efeito de tres níveis de Ca e quatro níveis de P no crescimento radicular, produção de matéria seca e nutrição de plantas de soja cv. IAC 17. Duas plantas foram cultivadas em cada vaso de 7 L, preenchidos com terra proveniente de um Latossolo Vermelho Escuro de textura média, por 35 dias. Foi efetuada calagem calculada para se atingir saturações do solo por bases de 45, 50 e 75 %. As doses de P foram 25, 50, 100 e 200 mg kg-1, utilizando-se de fonte de P isenta de Ca. O teor de 8,5 mmol(c) dm-3 de Ca no solo foi suficiente para o crescimento normal do sistema radicular da soja. A baixa disponibilidade de P, em saturação do solo por bases de 46%, induziu ao crescimento das raízes em comprimento e superfície, sem modificar a massa de matéria seca das raízes. Embora raízes finas e longas tenham geometria favorável à absorção de P, em parcelas com teores menores que 45 mg kg-1, este ajuste não é suficiente para manter a mesma absorção que é observada em parcelas com maior disponibilidade do nutriente.

MINERAL COMPOSITION of RAW MATERIAL, SUBSTRATE and FRUITING BODIES of Pleurotus ostreatus IN CULTURE

In a culture of a Pleurotus ostreatus (oyster mushroom) strain, macro and micronutrients of the raw material and the initial and spent substrates were evaluated. Substrates were formulated with sawdust from Simarouba amara Aubl. and Ochroma piramidale Cav. ex. Lam., crushed Bactris gasipaes Kunth and crushed Saccharum officinarum (sugar cane). Samples were solubilized by means of acid digestion (nitric-peridrol). Ca, Mg, Fe, Cu, Zn and Mn were determined by atomic absorption spectrophotometry, Na and K by atomic emission, and P by colorimetry. The mineral composition of the fruiting body varied with the substrates, which made possible the production of a fruiting body rich in K, P Mg and Fe. Potassium was the mineral with the highest content in the fruiting body in all substrates tested (36.83-42.18g.kg(-1)). There was an increase of protein and mineral content in the spent substrate in relation to the initial one.

TL, EPR and optical absorption studies on natural alexandrite compared to natural chrysoberyl

The TL, optical absorption (OA) and EPR properties of natural Brazilian alexandrite and chrysoberyl have been investigated. The TL measurements for natural alexandrite show five peaks between 100 and 450°C, with their emission spectrum having 370 and/or 570 nm components. The intensity of the 320°C TL peak was found to be enhanced with pre-annealing treatment, more prominently above 600°C. The OA and EPR measurements showed that this kind of heat treatment induces the Fe2→ Fe3+ conversion in the natural sample. Chrysoberyl samples exhibited the TL peaks at the same temperatures as alexandrite samples, but the glow curves were more than 200 times less intense than alexandrite ones.

Evaluation of the mixtures ammonium phosphate/magnesium nitrate and palladium nitrate/magnesium nitrate as modifiers for simultaneous determination of Cd, Cr, Ni and Pb in mineral water by GFAAS

A method is described for the simultaneous determination of Cd, Cr, Ni and Pb in mineral water samples by graphite furnace atomic absorption spectrometry with a transversely heated graphite atomizer (THGA) and a longitudinal Zeeman-effect background correction system. The electrothermal behavior of analytes during pyrolysis and atomization steps was studied without modifier, in presence of 5 μg Pd and 3 μg Mg(NO3)2 and in presence of 50 μg NH4H2PO4 and 3 μg Mg(NO3)2. A volume of 20 μL of a 0.028 mol L -1 HNO3 solution containing 50 μg L-1 Ni and Pb, 10 μg L-1 Cr and 5 μg L-1 Cd was dispensed into the graphite tube at 20°C. The mixture palladium/magnesium was selected as the optimum modifier. The pyrolysis and atomization temperatures were fixed at 1000°C and 2300°C, respectively. The characteristic masses were calculated as 2.2 pg Cd, 10 pg Cr, 42 pg Ni and 66 pg Pb and the lifetime of the graphite tube was around 600 firings. Limits of detection based on integrated absorbance were 0.02 μg L-1Cd, 0.94 μg L-1 Cr, 0.45 μg L-1 Ni and 0.75 μg L-1 Pb, which exceeded the requirements of Brazilian Food Regulation that establish the maximum permissible level for Cd, Cr, Ni and Pb at 3 μg L-1, 50 μg L-1, 20 μg L-1 and 10 μg L-1, respectively. The recoveries of Cd, Cr, Ni and Pb added to mineral water samples varied within the 93-108%, 96-104%, 87-101% and 98-108% ranges, respectively. Results of analysis of standard reference materials (National Institute of Standards and Technology: 1640-Trace Elements in Natural Water; 1643d-Trace Elements in Water) were in agreement with certified values at the 95% confidence level.

Effect of different radiopacifying agents on the physicochemical properties of white portland cement and white mineral trioxide aggregate

Introduction: The aim of this study was to evaluate the pH, calcium ion release, setting time, and solubility of white mineral trioxide aggregate (WMTA) and white Portland cement (WPC) combined with the following radiopacifying agents: bismuth oxide (BO), calcium tungstate (CT), and zirconium oxide (ZO). Methods: Fifty acrylic teeth with root-end filling material were immersed in ultrapure water for measurement of pH and calcium release (atomic absorption spectrophotometry) at 3, 24, 72, and 168 hours. For evaluation of setting time, each material was analyzed according to the American Society for Testing and Materials guidelines 266/08. The solubility test was performed according to American National Standards Institute/American Dental Association specification no. 57/2000. Solubility, setting time, and pH values were compared by using analysis of variance and Tukey test, and the values of calcium release were compared by the Kruskal-Wallis and Miller tests. The significance level was set at 5%. Results: The pH and calcium release were higher at 3 and 24 hours. WPC was the material with the higher values for both properties. WMTA had the greatest solubility among all materials (P <.05). All radiopacifiers increased the setting time of WPC, and WMTA had the shortest setting time among all materials (P < .05). Conclusions: All materials released calcium ions. Except for WPC/CT at 168 hours, all materials promoted an alkaline pH. On the basis of the obtained results, ZO and CT can be considered as potential radiopacifying agents to be used in combination with Portland cement. Copyright © 2012 American Association of Endodontists.

Influência do manganês no crescimento e na composição mineral de mudas de caramboleira

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Condutividade elétrica e composição mineral da solução de embebição de sementes de feijão armazenadas em duas temperaturas

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Potencial antioxidante, mineral, inibitório de enzimas α-amilase e lipoxigenase e composição centesimal de espécies da família Apiaceae

Eryngium foetidum L., Eryngium cf. campestre and Coriandrum sativum L. are Apiaceae family vegetable appreciated due to its peculiar flavor and consumed mainly in the north and northeast of Brazil. The vegetables are rich in protein, vitamins, fiber, minerals, total phenolics and other essential bioactives for a balanced health. Nevertheless, many vegetables are falling into disuse by the population, instead of processed foods. The rescue consumption of these species is very important, aiming at their nutritional, therapeutic and antioxidant benefits. In this study, was quantified the levels of total phenolic, flavonoids and dihidroflavonoides by molecular absorption spectrophotometry in the ultraviolet. The total antioxidant capacity was also evaluated using five methodologies of in vitro assays: test Total Antioxidant Capacity (TAC), scavenging of DPPH and ABTS radical, Power Reducing and Power Chelating. It was also evaluated the power inhibitor of α-amylase and lipoxygenase extracts. All species showed significant levels of total phenolics, flavonoids and dihidroflavonoides in its composition. All treatments showed antioxidant activity of 50% except the sheets of E. cf. campestre, C. sativum and bracts of E. foetidum in DPPH and bracts of E. foetidum in ABTS. All treatments also exhibited 50% inhibition activity of the enzyme lipoxygenase.In α-amylase only the leaves of E. cf. campestre and C. sativum showed IC50. It was evaluate the phytochemical composition, aiming to meet the nutritional potential of Apiaceae family vegetables, called unconventional: Eryngium foetidum L., Eryngium cf. campestre; and conventional: Coriandrum sativum L. At the centesimal composition analysis Coriandrum sativum L. presented the highest levels of protein. The leaves of Eryngium foetidum L. exhibited higher values than other species in dietary fiber, while Eryngium cf. campestre detach with superior results in lipids. About the analyzed minerals, the leaves of Eryngium cf. campestre expressed results superior to the other in N, Ca, Mg, S and Cu. The amount of iron highlighted in sheets of E. foetidum, whereas P, K, Mn, Zn and B were most significant on leaves of C. sativum. It was concluded that the levels of total phenolic compounds found in these vegetables, characterize them for its high potential in the antioxidant and inhibition of lipoxygenase and α-amylase enzymes. Their protein and mineral levels classify them as species that can be used as a nutritional source in the preparation of other foods and may their regular consumption bring benefit to human health.

Monitoramento da degradação térmica de óleo mineral isolante de transformador utilizando espectroscopia de absorção e fluorescência UV-Vis

Pós-graduação em Engenharia Elétrica - FEIS