A survey of the microbiological quality of commercial frozen prawn products

The paper presents the results of a bacteriological survey carried out on 2,917 samples of frozen prawn, 55 samples of raw material, 35 samples of water, 4 samples of ice and 42 samples of various equipment used for processing. The survey covered a period of three years (1960-63) and comprised of samples collected from five of the leading processing factories in Cochin. Frozen products tested consisted of headless (marine and fresh water), peeled and deveined and cooked frozen samples. Statistical analysis of the data shows that there is no significant variation between samples and between factories with respect to product quality. The standard plate count varied between 1.0x10(4 superscript) and 1.0x10(6 superscript) per gram for headless and between 1.0x10(4 superscript) and 1.0x10(7 superscript) for peeled and deveined and cooked frozen samples. Majority of the samples had bacterial load well within the limits prescribed for such products.

Microbiological quality of some iced fishes of Imphal market, Manipur

Imphal is the main marketing centre of fish in Manipur. As fish production of the state is not sufficient to meet the demands, about 120 metric tons of iced fishes are annually brought from other states and sold in this market. Microbiological quality of iced Wallago attu, Labeo rohita, L. gonius and Aorichthy aor in respect of total fungal count (TFC), total plate count of bacteria (TPC), Most Probable Number (MPN) of coliforms, Streptococci, Staphylococcus, Salmonella and Escherichia coli in four tissues (skin, muscle, gill and intestine) were analysed. In all cases, the counts were highest in the gills and lowest in the muscles. The values of TFC, TPC, coliforms, Streptococci and Staphylococci were 0-10³/g 10(sup)6-10⁸/g, 2-α/g, 10-10⁵/g, 10-10⁵/g respectively. E. coli and Salmonella were not detected in any of the samples while the ice used in the preservation contained 10⁵-10⁷ of TPC per gram. The microbiological qualities of the iced fishes of Imphal market were adjudged poor. The extremely high counts of bacteria might be due to (1) poor quality and left over fishes being packed, (2) contact with contaminated ice and (3) repeated thawing and freezing during the process of marketing and transportation.

Statistical quality control charts on attributes in fish processing technology

Apart from the use of statistical quality control chart for variables or attributes of food products in a food processing industry, the application of these charts for attributes of fishery products is explained. Statistical quality control chart for fraction defectives is explained by noting defective fish sausages per shift from a sausage industry while control chart for number of defectives is illustrated for number of defective fish cans in each hour of its production of a canning industry. C-chart is another type of control chart which is explained here for number of defects per single fish fillet sampled a1l random for every five minutes in a processing industry. These statistical quality control charts help in the more economic use of resource, time and labour than control charts for variables of products. Also control charts for attributes exhibit the quality history of finished products at different times of production thereby minimizing the risk of consumer rejection.

Quality control in the Indian fish processing industry

Quality control is defined as the continuing assessment of a current operation. It is usually the responsibility of an individual or a department directly responsible to the management. In the case of fish and fishery products, quality control includes all the steps taken to protect the quality of the material since catch until it reaches the consumer.

Adoption of recommended quality control practices by fish processing factories

Responses to mailed questionnaires from 31 fish processing factories revealed that for 55 recommended practices in quality control, the percentage of adopters varied from 21.43 to 100.The adoption index was not correlated to any of five variables studied. The mean adoption index did not differ significantly between five other criteria related to fish processing. Rate of rejection or reprocessing at the factory itself was highly correlated with the amount of water used per tonne of processed material.

Organoleptic and microbiological quality changes of catla (Catla catla) in immediate and delayed ice storage and at ambient temperature

An investigation was carried out on the quality changes of Catla (Catla calla) stored immediately (0 h) in ice, after 6 hours in ice and at ambient temperature. The samples were examined for organoleptic and microbiological parameters in summer. Organoleptically, the acceptability of fish varied between 16-20 days in both the iced storage conditions and 12-13.5 hours at ambient temperature (28°C). When fish were organoleptically just acceptable on the 16th day of storage, bacterial load were 6.23 and 6.17 log10 cfu/g, respectively for 0 hour and after 6 hours iced fish. But on the 20th day of storage, when fish were just unacceptable SPC were 6.51 and 6.62 log10 cfu/g. In case of ambient temperature storage condition standard plate count was 8.36 log10 cfu/g on 13.5 hours, when fish were organoleptically just unacceptable. At the time of rejection for fish stored in ice (0 hour and after 6 hours) on 20th day, gram negative and gram positive values were 55.45%, 44.55% and 44.52%, 55.48% respectively. While fish were rejected after 13.5 hours at ambient temperature gram negative and gram positive bacteria were found as 43.02% and 56.98%. The differences in SPC, gram positive and gram negative bacteria between the storage times were statistically significant (p<0.05).

Microbiological quality study of Macrobrachium rosenbergii (de Man 1879) during storage at -20°C temperature

The shelf life of fresh water prawn Macrobrachium rosenbergii by applying low temperature was investigated. M. rosenbergii preserved at -20°C was subjected for quality assessment before storage and at 15, 30, 45, and 90 days of storage period. The quality assessments as done microbiological viz. total bacterial count (TBC), total mould count (TMC), total yeast count (TYC), total coliform count (TCC) and salmonella count. All the samples were acceptable during 90 days because the upper limit of all spoilage indicator was not exceeding within the experimental time period.

A call for mtDNA data quality control in forensic science

There is increasing evidence that many of the mitochondrial DNA (mtDNA) databases published in the fields of forensic science and molecular anthropology are flawed. An a posteriori phylogenetic analysis of the sequences could help to eliminate most of the errors and thus greatly improve data quality. However, previously published caveats and recommendations along these lines were not yet picked up by all researchers. Here we call for stringent quality control of mtDNA data by haplogroup-directed database comparisons. We take some problematic databases of East Asian mtDNAs, published in the Journal of Forensic Sciences and Forensic Science International, as examples to demonstrate the process of pinpointing obvious errors. Our results show that data sets are not only notoriously plagued by base shifts and artificial recombination but also by lab-specific phantom mutations, especially in the second hypervariable region (HVR-II). (C) 2003 Elsevier Ireland Ltd. All rights reserved.

Applying quality control in building energy modelling: Comparative simulation of a high performance building

Quality control is considered from the simulator's perspective through comparative simulation of an ultra energy-efficient building with EE4-DOE2.1E and EnergyPlus. The University of Calgary's Leadership in Energy and Environmental Design Platinum Child Development Centre, with a 66% certified energy cost reduction rating, was the case study building. A Natural Resources Canada incentive program required use of EE4 interface with DOE2.1E simulation engine for energy modelling. As DOE2.1E lacks specific features to simulate advanced systems such as radiant cooling in the CDC, an EnergyPlus model was developed to further evaluate these features. The EE4-DOE2.1E model was used for quality control during development of the base EnergyPlus model and simulation results were compared. Advanced energy systems then added to the EnergyPlus model generated small difference in estimated total annual energy use. The comparative simulation process helped identify the main input errors in the draft EnergyPlus model. The comparative use of less complex simulation programs is recommended for quality control when producing more complex models. © 2009 International Building Performance Simulation Association (IBPSA).

Fingerprinting quality control of Qianghuo by high-performance liquid chromatography-photodiode array detection

A novel, simple and accurate fingerprint method was developed using high-performance liquid chromatography-photodiode array detection (HPLC-DAD) for the quality control of Qianghuo, a Tibetan folk and Chinese herbal medicine used as a diaphoretic, an antifebrile and an anodyne. For the first time, the feasibility and advantages of employing chromatographic fingerprint were investigated and demonstrated for the evaluation of Qianghuo by systematically comparing chromatograms of aqueous extracts with the professional analytical software recommended by State Food and Drug Administration (SFDA). Our results revealed that the chromatographic fingerprint combing similarity evaluation could efficiently identify and distinguish raw herbs of Qianghno from different sources and different species. The effects on Notopterygium forbesii Boiss (Apiaceae) chromatographic fingerprints resulted from collecting locations, harvesting time were also examined. (c) 2006 Elsevier lrelanc Ltd. All rights reserved.

Quality control autophagy: a joint effort of ubiquitin, protein deacetylase and actin cytoskeleton.

Autophagy has been predominantly studied as a nonselective self-digestion process that recycles macromolecules and produces energy in response to starvation. However, autophagy independent of nutrient status has long been known to exist. Recent evidence suggests that this form of autophagy enforces intracellular quality control by selectively disposing of aberrant protein aggregates and damaged organelles--common denominators in various forms of neurodegenerative diseases. By definition, this form of autophagy, termed quality-control (QC) autophagy, must be different from nutrient-regulated autophagy in substrate selectivity, regulation and function. We have recently identified the ubiquitin-binding deacetylase, HDAC6, as a key component that establishes QC. HDAC6 is not required for autophagy activation per se; rather, it is recruited to ubiquitinated autophagic substrates where it stimulates autophagosome-lysosome fusion by promoting F-actin remodeling in a cortactin-dependent manner. Remarkably, HDAC6 and cortactin are dispensable for starvation-induced autophagy. These findings reveal that autophagosomes associated with QC are molecularly and biochemically distinct from those associated with starvation autophagy, thereby providing a new molecular framework to understand the emerging complexity of autophagy and therapeutic potential of this unique machinery.

Solder paste characterisation: towards the development of quality control (QC) tool

Purpose – The purpose of this paper is to develop a quality control tool based on rheological test methods for solder paste and flux media. Design/methodology/approach – The rheological characterisation of solder pastes and flux media was carried out through the creep-recovery, thixotropy and viscosity test methods. A rheometer with a parallel plate measuring geometry of 40mm diameter and a gap height of 1mm was used to characterise the paste and associated flux media. Findings – The results from the study showed that the creep-recovery test can be used to study the deformation and recovery of the pastes, which can be used to understand the slump behaviour in solder pastes. In addition, the results from the thixotropic and viscosity test were unsuccessful in determining the differences in the rheological flow behaviour in the solder pastes and the flux medium samples. Research limitations/implications – More extensive rheological and printing testing is needed in order to correlate the findings from this study with the printing performance of the pastes. Practical implications – The rheological test method presented in the paper will provide important information for research and development, quality control and production staff to facilitate the manufacture of solder pastes and flux media. Originality/value – The paper explains how the rheological test can be used as a quality control tool to identify the suitability of a developmental solder paste and flux media used for the printing process.