Patterns of correlation between vehicle occupant seat pressure and anthropometry

Seat pressure is known as a major factor of seat comfort in vehicles. In passenger vehicles, there is lacking research into the seat comfort of rear seat occupants. As accurate seat pressure measurement requires significant effort, simulation of seat pressure is evolving as a preferred method. However, analytic methods are based on complex finite element modeling and therefore are time consuming and involve high investment. Based on accurate anthropometric measurements of 64 male subjects and outboard rear seat pressure measurements in three different passenger vehicles, this study investigates if a set of parameters derived from seat pressure mapping are sensitive enough to differentiate between different seats and whether they correlate with anthropometry in linear models. In addition to the pressure map analysis, H-Points were measured with a coordinate measurement system based on palpated body landmarks and the range of H-Point locations in the three seats is provided. It was found that for the cushion, cushion contact area and cushion front area/force could be modeled by subject anthropometry,while only seatback contact area could be modeled based on anthropometry for all three vehicles. Major differences were found between the vehicles for other parameters.

Data-resolution based optimization of the data-collection strategy for near infrared diffuse optical tomography

Purpose: To optimize the data-collection strategy for diffuse optical tomography and to obtain a set of independent measurements among the total measurements using the model based data-resolution matrix characteristics. Methods: The data-resolution matrix is computed based on the sensitivity matrix and the regularization scheme used in the reconstruction procedure by matching the predicted data with the actual one. The diagonal values of data-resolution matrix show the importance of a particular measurement and the magnitude of off-diagonal entries shows the dependence among measurements. Based on the closeness of diagonal value magnitude to off-diagonal entries, the independent measurements choice is made. The reconstruction results obtained using all measurements were compared to the ones obtained using only independent measurements in both numerical and experimental phantom cases. The traditional singular value analysis was also performed to compare the results obtained using the proposed method. Results: The results indicate that choosing only independent measurements based on data-resolution matrix characteristics for the image reconstruction does not compromise the reconstructed image quality significantly, in turn reduces the data-collection time associated with the procedure. When the same number of measurements (equivalent to independent ones) are chosen at random, the reconstruction results were having poor quality with major boundary artifacts. The number of independent measurements obtained using data-resolution matrix analysis is much higher compared to that obtained using the singular value analysis. Conclusions: The data-resolution matrix analysis is able to provide the high level of optimization needed for effective data-collection in diffuse optical imaging. The analysis itself is independent of noise characteristics in the data, resulting in an universal framework to characterize and optimize a given data-collection strategy. (C) 2012 American Association of Physicists in Medicine. http://dx.doi.org/10.1118/1.4736820]

Ising model on a random network with annealed or quenched disorder

We study the equilibrium properties of an Ising model on a disordered random network where the disorder can be quenched or annealed. The network consists of fourfold coordinated sites connected via variable length one-dimensional chains. Our emphasis is on nonuniversal properties and we consider the transition temperature and other equilibrium thermodynamic properties, including those associated with one-dimensional fluctuations arising from the chains. We use analytic methods in the annealed case, and a Monte Carlo simulation for the quenched disorder. Our objective is to study the difference between quenched and annealed results with a broad random distribution of interaction parameters. The former represents a situation where the time scale associated with the randomness is very long and the corresponding degrees of freedom can be viewed as frozen, while the annealed case models the situation where this is not so. We find that the transition temperature and the entropy associated with one-dimensional fluctuations are always higher for quenched disorder than in the annealed case. These differences increase with the strength of the disorder up to a saturating value. We discuss our results in connection to physical systems where a broad distribution of interaction strengths is present.

深水土工调查技术和分析方法新进展

简要介绍了近年来国外在深水土工调查技术和分析方法方面取得的新进展,包括:钻孔取样技术在钻入模式和取样器的多样化和有效组合,从而实现不同水深和不同土类条件下的高质量取样;带孔压测量的圆锥触探试验在测量方法、孔压测量单元设计、探头的小型化和多样化、数据的快速传输以及分析理论方面的进展;减少土样扰动,准确评估粘土不排水抗剪强度的"SHANSEP"室内试验方法及应用。

Two-magnon bound state causes ultrafast thermally induced magnetisation switching

There has been much interest recently in the discovery of thermally induced magnetisation switching using femtosecond laser excitation, where a ferrimagnetic system can be switched deterministically without an applied magnetic field. Experimental results suggest that the reversal occurs due to intrinsic material properties, but so far the microscopic mechanism responsible for reversal has not been identified. Using computational and analytic methods we show that the switching is caused by the excitation of two-magnon bound states, the properties of which are dependent on material factors. This discovery allows us to accurately predict the onset of switching and the identification of this mechanism will allow new classes of materials to be identified or designed for memory devices in the THz regime.

Interacción y programación de trayectorias de robot industrial tipo SCARA.

[ES]En el desarrollo de este Trabajo de Fin De Grado (TFG) en el curso 2014-2015 se ha trabajado con un robot de tipo SCARA, muy utilizado en la industria. El objetivo era analizar su cinemática y programar trayectorias que el robot pudiera realizar. En primer lugar se ha llevado a cabo un estudio del Estado del Arte, en el que se describe la robótica industrial y su desarrollo histórico hasta nuestros días, desarrollo que presenta un futuro prometedor. Además, se han descrito las particularidades que atañen al SCARA: sus características, su relevancia y su historia. En cuanto al robot, previamente se ha realizado un análisis cinemático del SCARA. Mediante métodos matriciales se han resuelto los problemas de posiciones y velocidades, para luego programarlas en MATLAB. Una vez comprendida su cinemática, se ha interactuado con él en el taller para poder entender su funcionamiento, sus componentes y su control. Después, con los conocimientos que se han adquirido, se han programado varias trayectorias usando el lenguaje del robot, el lenguaje V+, para finalmente ejecutar esos movimientos. El Trabajo se completa con la descripción de las tareas mediante un diagrama de Gantt, el presupuesto, la declaración de gastos y el análisis de riesgos.

Spinoza on method and freedom

The thesis as a whole argues that Spinoza’s Ethics in both method and content is aimed at the normal, partly rational person. Chapter 1 is on Spinoza’s writing style, finding that rather than being arid and technical, it aims to convince the reader by means of various rhetorical techniques, so does not assume an already rational reader. The following chapters of Part 1 examine whether the Ethics’ use of the synthetic geometric method exposes it to Descartes’ critique of that method in the “Second Replies” to his Meditations, that it is not suitable for pedagogy. This involves a consideration of the role of the TIE, finding in that early text not the analytic wing of a two-part analytic-synthetic method, but rather a defence and necessitation of a stand-alone synthetic method. Part 2 of the thesis develops this study of Spinoza’s writing for the common man to consider whether he is writing about the common man. This is done by examining one of the seemingly most abstract propositions in the Ethics, 4P72, which claims that a free man will not deceive even to save his own life. The study examines who exactly is this “free man” and what is his role in the Ethics. The study looks at the examples of free men in the TTP and at the concept of the model in the Ethics, and finds that rather than the free man being an impossible ideal which we can aim at but never achieve, everyone is free to some extent, and that even normal people are at times “the free man”.

Homocysteine, Methylenetetrahydrofolate Reductase C677T Polymorphism, and Risk of Retnal Vein Occlusion: A Meta-analysis

Objective: To assess the role of plasma total homocysteine (tHcy) concentrations and homozygosity for the thermolabile variant of the methylenetetrahydrofolate reductase (MTHFR) C677T gene as risk factors for retinal vascular occlusive disease.

Design: Retinal vein occlusion (RVO) is an important cause of vision loss. Early meta-analyses showed that tHcy was associated with an increased risk of RVO, but a significant number of new studies have been published. Participants and/or Controls: RVO patients and controls.

Methods: Data sources included MEDLINE, Web of Science, and PubMed searches and searching reference lists of relevant articles and reviews. Reviewers searched the databases, selected the studies, and then extracted data. Results were pooled quantitatively using meta-analytic methods.

Main Outcome Measures: tHcy concentrations and MTHFR genotype.

Results: There were 25 case-control studies for tHcy (1533 cases and 1708 controls) and 18 case-control studies for MTHFR (1082 cases and 4706 controls). The mean tHcy was on average 2.8 mol/L (95% confidence
interval [CI], 1.8 –3.7) greater in the RVO cases compared with controls, but there was evidence of between-study heterogeneity (P0.001, I2 93%). There was funnel plot asymmetry suggesting publication bias. There was no evidence of association between homozygosity for the MTHFR C677T genotype and RVO (odds ratio [OR] 1.20; 95% CI, 0.84–1.71), but again marked heterogeneity (P 0.004, I2 53%) was observed.

Conclusions: There was some evidence that elevated tHcy was associated with RVO, but not homozygosity for the MTHFR C677T genotype. Both analyses should be interpreted cautiously because of marked heterogeneity between the study estimates and possible effect of publication bias on the tHcy findings.

Financial Disclosure(s): The author(s) have no proprietary or commercial interest in any materials discussed in this article.

Genesis of the brecciated rocks from mid atlantic ridge hydrothermal systems : Lucky Strike (37º50’N) and Menez Gwen (37º50’N)

Tese de doutoramento, Geologia (Metalogenia), Universidade de Lisboa, Faculdade de Ciências, 2014

Visualising London

This research investigates how photographs can be analysed to extract meaning. Two methodologies, visual anthropology and social semiotics, are used to analyse a collection of images and accompanying texts generated by a group of first year tourism students in London. Photographs are categorised into subject areas including iconic buildings, street scenes, people and analysed according to how they relate to the photographers’ characteristics, such as age and nationality. A group of images of Big Ben are then analysed using a social semiotics approach, considering both compositional and contextual information to extract meanings. Results and techniques are then contrasted and compared, noting how the complexity of the image makers’ experience of the city they are documenting lead to their images having multi-layered meanings, and that combining analytic methods can fruitfully reveal a range of these meanings.

Corporate political activity and firm outcomes: A meta-analysis

Using meta-analytic methods on a sample of 74 studies, we explore the links between CPA and public policy outcomes, and between CPA and firm outcomes. We find that CPA has at best a weak effect and that it appears to be better at maintaining public policy than changing them.

Le livre sous la loupe : Nouvelles formes d’écriture électronique

Les fichiers qui accompagnent le document incluent une archive .jar du zoom-éditeur (qui peut être lancé via un browser) et des exemples de z-textes réalisés avec ce logiciel.

Développement, mise à l’essai et évaluation qualitative d’une intervention infirmière dyadique auprès de couples âgés vivant avec la maladie de Parkinson au stade modéré

Au Québec, près de 25 000 personnes, principalement des aînés, sont touchées par la maladie de Parkinson (MP), la majorité étant soignée par leur conjoint. Au stade modéré, la MP altère la santé et la qualité de vie de ces couples. Ce stade est propice à la mise en place d’interventions dyadiques, car les couples expérimentent des pertes croissantes, nécessitant plusieurs ajustements. Néanmoins, aucune étude n’avait encore examiné leurs besoins d’intervention lors de cette transition et peu d’interventions pour les soutenir ont fait l’objet d’études évaluatives. Avec comme cadre de référence la théorie de l’expérience de transition de Meleis et al. (2000) et l’approche systémique de Wright et Leahey (2009), cette étude visait à développer, mettre à l’essai et évaluer une intervention auprès de couples âgés vivant avec la MP au stade modéré. À cette fin, un devis qualitatif et une approche participative ont été privilégiés. L’élaboration et l’évaluation de l’intervention s’appuient sur le cadre méthodologique d’Intervention Mapping de Bartholomew et al. (2006) et sur les écrits de Miles et Huberman (2003). L’étude s’est déroulée dans une clinique ambulatoire spécialisée dans la MP. Dix couples et quatre intervenants ont collaboré à la conceptualisation de l’intervention. Trois nouveaux couples en ont fait l’expérimentation et l’évaluation. L’intervention dyadique compte sept rencontres de 90 minutes, aux deux semaines. Les principaux thèmes, les méthodes et les stratégies d’intervention sont basés sur les besoins et les objectifs des dyades ainsi que sur des théories et des écrits empiriques. L’intervention est orientée vers les préoccupations des dyades, la promotion de la santé, la résolution de problèmes, l’accès aux ressources, la communication et l’ajustement des rôles. Les résultats de l’étude ont montré la faisabilité, l’acceptabilité et l’utilité de l’intervention. Les principales améliorations notées par les dyades sont l’adoption de comportements de santé, la recherche de solutions ajustées aux situations rencontrées et profitables aux deux partenaires, la capacité de faire appel à des services et l’accroissement des sentiments de maîtrise, de soutien mutuel, de plaisir et d’espoir. Cette étude fournit des pistes aux infirmières, engagées dans différents champs de pratique, pour développer et évaluer des interventions dyadiques écologiquement et théoriquement fondées.

Queues with Customer Induced Interruption

In this thesis we have introduced and studied the notion of self interruption of service by customers. Service interruption in queueing systems have been extensively discussed in literature (see, Krishnamoorthy, Pramod and Chakravarthy [38]) for the most recent survey. So far all work reported deal with cases in which service interruptions are generated by sources other than customers. However, there are situations where interruptions are due to the customers rather than the system. Such situations are especially arise at doctors clinic, banks, reservation counter etc. Our attempt is to quantify a few of such problems. Systematically we have proceed from single server queue (in Chapter 2) to multi-server queues (Chapter 3). In Chapte 4, we have studied a very general multiserver queueing model with service interruption and protection of service phases. We also introduced customer interruption in a retrial setup (in Chapter 5). All models (from Chapter 2 to Chapter 4) that were analyzed involve 'non-preemptive priority' for interrupted customers where as in the model discussed in Chapter 5 interruption of service by customers is not encouraged. So the interrupted customers cannot access the server as long as there are primary customers in the system. In Chapter 5 we have obtained an explicit expression for the stability condition of the system. In all models analyzed in this thesis, we have assumed that no more than one interruption is allowed for a customer while in service. Since the models are not analytically tractable, a large number of numerical illustrations were given in each chapter it illustrate the working of the systems. We can extend the models discussed in this thesis to several directions. For example some of the models can be analyzed with both server induced and customer induced interruptions the results for which are not available till date. Another possible extension of work is to the case where there is no bound on the number of interruptions a customer is permitted to have before service completion. More complex is the case where a customer is permitted to have a nite number (K ≥ 2) of We can extend the models discussed in this thesis to several directions.

FEM based Virtual Prototyping and Design of Third Harmonic Excitation System for Low Voltage Brushless Alternators

Salient pole brushless alternators coupled to IC engines are extensively used as stand-by power supply units for meeting in- dustrial power demands. Design of such generators demands high power to weight ratio, high e ciency and low cost per KVA out- put. Moreover, the performance characteristics of such machines like voltage regulation and short circuit ratio (SCR) are critical when these machines are put into parallel operation and alterna- tors for critical applications like defence and aerospace demand very low harmonic content in the output voltage. While designing such alternators, accurate prediction of machine characteristics, including total harmonic distortion (THD) is essential to mini- mize development cost and time. Total harmonic distortion in the output voltage of alternators should be as low as possible especially when powering very sophis- ticated and critical applications. The output voltage waveform of a practical AC generator is replica of the space distribution of the ux density in the air gap and several factors such as shape of the rotor pole face, core saturation, slotting and style of coil disposition make the realization of a sinusoidal air gap ux wave impossible. These ux harmonics introduce undesirable e ects on the alternator performance like high neutral current due to triplen harmonics, voltage distortion, noise, vibration, excessive heating and also extra losses resulting in poor e ciency, which in turn necessitate de-rating of the machine especially when connected to non-linear loads. As an important control unit of brushless alternator, the excitation system and its dynamic performance has a direct impact on alternator's stability and reliability. The thesis explores design and implementation of an excitation i system utilizing third harmonic ux in the air gap of brushless al- ternators, using an additional auxiliary winding, wound for 1=3rd pole pitch, embedded into the stator slots and electrically iso- lated from the main winding. In the third harmonic excitation system, the combined e ect of two auxiliary windings, one with 2=3rd pitch and another third harmonic winding with 1=3rd pitch, are used to ensure good voltage regulation without an electronic automatic voltage regulator (AVR) and also reduces the total harmonic content in the output voltage, cost e ectively. The design of the third harmonic winding by analytic methods demands accurate calculation of third harmonic ux density in the air gap of the machine. However, precise estimation of the amplitude of third harmonic ux in the air gap of a machine by conventional design procedures is di cult due to complex geome- try of the machine and non-linear characteristics of the magnetic materials. As such, prediction of the eld parameters by conven- tional design methods is unreliable and hence virtual prototyping of the machine is done to enable accurate design of the third har- monic excitation system. In the design and development cycle of electrical machines, it is recognized that the use of analytical and experimental methods followed by expensive and in exible prototyping is time consum- ing and no longer cost e ective. Due to advancements in com- putational capabilities over recent years, nite element method (FEM) based virtual prototyping has become an attractive al- ternative to well established semi-analytical and empirical design methods as well as to the still popular trial and error approach followed by the costly and time consuming prototyping. Hence, by virtually prototyping the alternator using FEM, the important performance characteristics of the machine are predicted. Design of third harmonic excitation system is done with the help of results obtained from virtual prototype of the machine. Third harmonic excitation (THE) system is implemented in a 45 KVA ii experimental machine and experiments are conducted to validate the simulation results. Simulation and experimental results show that by utilizing third harmonic ux in the air gap of the ma- chine for excitation purposes during loaded conditions, triplen harmonic content in the output phase voltage is signi cantly re- duced. The prototype machine with third harmonic excitation system designed and developed based on FEM analysis proved to be economical due to its simplicity and has the added advan- tage of reduced harmonics in the output phase voltage.