Monoclonal antibody against carcinoembryonic antigen (CEA) identifies two new forms of crossreacting antigens of molecular weight 90,000 and 160,000 in normal granulocytes.

Two new forms of non-specific crossreacting antigens (NCAs) were identified in the Nonidet P40 (NP-40) extracts of normal granulocytes by precipitation with the monoclonal antibody (MAb) 192 directed against carcinoembryonic antigen (CEA) and already known to crossreact with the perchloric acid soluble NCA-55. The NP-40 soluble NCAs recognized by MAb 192 have apparent mol. wts of 90,000 and 160,000 in sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). Both NCAs appear to consist of a single monomeric polypeptide chain, since they have the same electrophoretic mobility in SDS-PAGE under reduced and non-reduced conditions. When granulocytes were extracted with perchloric acid instead of NP-40, only the 55,000 mol. wt antigen, corresponding to the previously described NCA-55, was precipitated by MAb 192. Furthermore, it was shown that NCA-55 is not a degradation product of NCA-90 or NCA-160 due to the perchloric acid treatment because exposure to perchloric acid of NCA preparations purified from NP-40 extracts did not change their apparent mol. wts in SDS-PAGE. It was also shown that NCA-160 is not a granulocytic form of CEA because it was not precipitated by the MAb 35 reacting exclusively with CEA. Immunocytochemical studies of granulocytes and macrophages showed that MAb 192 stained both types of cells whereas MAb 47 stained only the granulocytes and MAb 35 none of these cells. In granulocytes both MAbs reacted with antigens associated with granules and also present at the periphery of the nucleus as well as in the Golgi apparatus. The NCA-90 identified by MAb 192 was found by sequential immunodepletion to be antigenically distinct from the NCA-95 precipitated by MAb 47. The epitope recognized by MAb 192 on CEA and NCA molecules appears to be on the peptidic moiety because the antigens deglycosylated by the enzyme Endo F were still precipitated by this MAb. Taken together, the results indicate that MAb 192 identifies two novel forms of NCA (NCA-90 and NCA-160) in NP-40 extracts of granulocytes, which are distinct from CEA and the previously described NCA-55 and NCA-95 identified by MAbs 192 and 47, respectively, in perchloric acid extracts of granulocytes.

Cost-effectiveness of low-molecular-weight heparin for treatment of pulmonary embolism.

BACKGROUND: Low-molecular-weight heparin (LMWH) appears to be safe and effective for treating pulmonary embolism (PE), but its cost-effectiveness has not been assessed. METHODS: We built a Markov state-transition model to evaluate the medical and economic outcomes of a 6-day course with fixed-dose LMWH or adjusted-dose unfractionated heparin (UFH) in a hypothetical cohort of 60-year-old patients with acute submassive PE. Probabilities for clinical outcomes were obtained from a meta-analysis of clinical trials. Cost estimates were derived from Medicare reimbursement data and other sources. The base-case analysis used an inpatient setting, whereas secondary analyses examined early discharge and outpatient treatment with LMWH. Using a societal perspective, strategies were compared based on lifetime costs, quality-adjusted life-years (QALYs), and the incremental cost-effectiveness ratio. RESULTS: Inpatient treatment costs were higher for LMWH treatment than for UFH (dollar 13,001 vs dollar 12,780), but LMWH yielded a greater number of QALYs than did UFH (7.677 QALYs vs 7.493 QALYs). The incremental costs of dollar 221 and the corresponding incremental effectiveness of 0.184 QALYs resulted in an incremental cost-effectiveness ratio of dollar 1,209/QALY. Our results were highly robust in sensitivity analyses. LMWH became cost-saving if the daily pharmacy costs for LMWH were < dollar 51, if > or = 8% of patients were eligible for early discharge, or if > or = 5% of patients could be treated entirely as outpatients. CONCLUSION: For inpatient treatment of PE, the use of LMWH is cost-effective compared to UFH. Early discharge or outpatient treatment in suitable patients with PE would lead to substantial cost savings.

Molecular weight of hydroxyethyl starch : is there an effect on blood coagulation and pharmacokinetics ?

Résumé Fondement : le développement de solutions d'hydroxy-éthyl-amidons (HEAS) avec peu d'impact sur la coagulation sanguine, mais un effet supérieur sur la volémie, par comparaison aux HEAS couramment utilisés, est d'un grand intérêt clinique. Nous posons l'hypothèse que des solutions de haut poids moléculaire et de bas degré de substitution possèdent ces caractéristiques. Méthode : trente porcs ont été perfusés avec trois HEAS différents (20 ml/kg) de même degré de substitution (0.42) mais de poids moléculaire différent (130, 500 et 900 kDa). Une série de prélèvements sanguins ont été effectués sur 24 heures, sur lesquels des analyses de coagulation sanguine étaient effectuées par thromboélastographie et dosages plasmatiques. De plus, la concentration plasmatique ainsi que le poids moléculaire in vivo ont été déterminés, ainsi que des paramètres de pharmacocinétiques, ceci en se basant sur un modèle bi-compartimental. Résultats : les analyses de thromboélastographie et les tests de coagulation plasmatique n'ont pas démontré d'altération plus marquée de la coagulation sanguine après l'utilisation des solutions des HAES 500 et HAES 900, par comparaison avec celle de HAES 130. Par contre, les HAES 500 et HAES 900 ont présenté une plus grande aire sous la courbe (area under the curve), dans la relation concentration en fonction du temps [1542 (142) g min litre-1, p<0.001, 1701 (321) g min litre-1, p<0.001] par rapport au HAES 130 [1156 (223) g min litre-1]. La demi-vie alpha (t ½α) était plus longue pour les HAES 500 [53.8 (8.6) min, p<0.01] et HAES 900 [57.1 (12.3) min, p<0.01 ]que pour le HAES 130 [39.9 (10.7) min]. La demi-vie beta (t½β) était par contre similaire pour les trois types de HAES [de 332 (100) à 381 (63) min]. Conclusions : pour les HAES de bas degré de substitution, le poids moléculaire n'est pas un facteur clé en ce qui concerne l'altération de la coagulation. La persistance intravasculaire initialement plus longue des HAES de haut poids moléculaire et bas degré de substitution pourrait résulter dans un plus long effet volémique de ces substances. Abstract Background: The development of hydroxyethyl starches (HES) with low impact on blood coagulation but higher volume effect compared with the currently used HES solutions is of clinical interest. We hypothesized that high molecular weight, low-substituted HES might possess these properties. Methods: Thirty pigs were infused with three different HES solutions (20 ml kg-1) with the same degree of molar substitution (0.42) but different molecular weights (130, 500 and 900 kDa). Serial blood samples were taken over 24 h and blood coagulation was assessed by Thromboelastograph® analysis and analysis of plasma coagulation. In addition, plasma concentration and in vivo molecular weight were determined and pharmacokinetic data were computed based on a two-compartment model. Results: Thromboelastograph analysis and plasma coagulation tests did not reveal a more pronounced alteration of blood coagulation with HES 500 and HES 900 compared with HES 130. In contrast, HES 500 and HES 900 had a greater area under the plasma concentration-time curve [1542 (142) g min litre-1, P<0.001, 1701 (321) g min litre-1, P<0.001] than HES 130 [I 156 (223) g min litre-1] and alpha half life (t ½α) was longer for HES 500 [53.8 (8.6) min, P<0.01 ] and HES 900 [57. I (I 2.3) min, P<0.01 ] than for HES 130 [39.9 (I 0.7) min]. Beta half life (t½β), however, was similar for all three types of HES [from 332 (100) to 381 (63) min]. Conclusions. In low-substituted HES, molecular weight is not a key factor in compromising blood coagulation. The longer initial intravascular persistence of high molecular weight lowsubstituted HES might result in a longer lasting volume effect.

Low molecular weight carboxylic acids in oxidizing porphyry copper tailings

The distribution of low molecular weight carboxylic acids (LMWCA) was investigated in pore water profiles from two porphyry copper tailings impoundments in Chile (Piuquenes at La Andina and Cauquenes at El Teniente mine). The objectives of this study were (1) to determine the distribution of LMWCA, which are interpreted to be the metabolic byproducts of the autotroph microbial community in this low organic carbon system, and (2) to infer the potential role of these acids in cycling of Fe and other elements in the tailings impoundments. The speciation and mobility of iron, and potential for the release of H+ via hydrolysis of the ferric iron, are key factors in the formation of acid mine drainage in sulfidic mine wastes. In the low-pH oxidation zone of the Piuquenes tailings, Fe(III) is the dominant iron species and shows high mobility. LMWCA, which occur mainly between the oxidation front down to 300 cm below the tailings surface at both locations (e.g., max concentrations of 0.12 mmol/L formate, 0.17 mmol/L acetate, and 0.01 mmol/L pyruvate at Piuquenes and 0.14 mmol/L formate, 0.14 mmol/L acetate, and 0.006 mmol/L pyruvate at Cauquenes), are observed at the same location as high Fe concentrations (up to 71.2 mmol/L Fe(II) and 16.1 mmol/L Fe(III), respectively). In this zone, secondary Fe(111) hydroxides are depleted. Our data suggest that LMWCA may influence the mobility of iron in two ways. First, complexation of Fe(III), through formation of bidentate Fe(III)-LMWCA complexes (e.g., pyruvate, oxalate), may enhance the dissolution of Fe(III) (oxy)hydroxides or may prevent precipitation of Fe(III) (oxy)hydroxides. Soluble Fe(III) chelate complexes which may be mobilized downward and convert to Fe(II) by Fe(III) reducing bacteria. Second, monodentate LMWCA (e.g., acetate and formate) can be used by iron-reducing bacteria as electron donors (e.g., Acidophilum spp.), with ferric iron as the electron acceptor. These processes may, in part, explain the low abundances of secondary Fe(III) hydroxide precipitates below the oxidation front and the high concentrations of Fe(II) observed in the pore waters of some low-sulfide systems. The reduction of Fe(III) and the subsequent increase of iron mobility and potential acidity transfer (Fe(II) oxidation can result in the release of H+ in an oxic environment) should be taken in account in mine waste management strategies.

Low-molecular-weight or unfractionated heparin in venous thromboembolism: the influence of renal function.

BACKGROUND: In patients with acute venous thromboembolism and renal insufficiency, initial therapy with unfractionated heparin may have some advantages over low-molecular-weight heparin. METHODS: We used the Registro Informatizado de la Enfermedad TromboEmbólica (RIETE) Registry data to evaluate the 15-day outcome in 38,531 recruited patients. We used propensity score matching to compare patients treated with unfractionated heparin with those treated with low-molecular-weight heparin in 3 groups stratified by creatinine clearance levels at baseline: >60 mL/min, 30 to 60 mL/min, or <30 mL/min. RESULTS: Patients initially receiving unfractionated heparin therapy (n = 2167) more likely had underlying diseases than those receiving low-molecular-weight heparin (n = 34,665). Propensity score-matched groups of patients with creatinine clearance levels >60 mL/min (n = 1598 matched pairs), 30 to 60 mL/min (n = 277 matched pairs), and <30 mL/min (n = 210 matched pairs) showed an increased 15-day mortality for unfractionated heparin compared with low-molecular-weight heparin (4.5% vs 2.4% [P = .001], 5.4% vs 5.8% [P = not significant], and 15% vs 8.1% [P = .02], respectively), an increased rate of fatal pulmonary embolism (2.8% vs 1.2% [P = .001], 3.2% vs 2.5% [P = not significant], and 5.7% vs 2.4% [P = .02], respectively), and a similar rate of fatal bleeding (0.3% vs 0.3%, 0.7% vs 0.7%, and 0.5% vs 0.0%, respectively). Multivariate analysis confirmed that patients treated with unfractionated heparin were at increased risk for all-cause death (odds ratio, 1.8; 95% confidence interval, 1.3-2.4) and fatal pulmonary embolism (odds ratio, 2.3; 95% confidence interval, 1.5-3.6). CONCLUSIONS: In comparison with low-molecular-weight heparin, initial therapy with unfractionated heparin was associated with a higher mortality and higher rate of fatal pulmonary embolism in patients with creatinine clearance levels >60 mL/min or <30 mL/min, but not in those with levels between 30 and 60 mL/min.

High Molecular Weight Methacrylate Sealing of a Bridge Deck, HR-2031, 1988

The Iowa Department of Transportation used a high molecular weight methacrylate (HMWM) resin to seal a 3,340 ft. x 64 ft. bridge deck in October 1986. The sealing was necessary to prevent deicing salt brine from entering a substantial number of transverse cracks that coincided with the epoxy coated top steel and unprotected bottom steel. HMWM resin is a three component product composed of a monomer, a cumene hydroperoxide initiator and a cobalt naphthenate promoter. The HMWM was applied with a dual spray bar system and flat-fan nozzles. Initiated monomer delivered through one spray bar was mixed in the air with promoted monomer from the other spray bar. The application rate averaged 0.956 gallons per 100 square feet for the tined textured driving lanes. Dry sand was broadcast on the surface at an average coverage of 0.58 lbs. per square yard to maintain friction. Coring showed that the HMWM resin penetrated the cracks more than two inches deep. Testing of the treated deck yielded Friction Numbers averaging 33 with a treaded tire compared to 36 prior to treatment. An inspection soon after treatment found five leaky cracks in one of the 15 spans. One inspection during a steady rain showed no leakage, but leakage from numerous cracks occurred during a subsequent rain. A second HMWM application was made on two spans. Leakage through the double application occurred during a rain. Neither the single or double application were successful in preventing leakage through the cracks.

A comparative study between crosslinked sodium hyaluronate (healaflow glaucoma implant) and high molecular weight sodium hyaluronate (healon 5) as subconjunctival spacers injected into failed filtration blebs during needling with MMC

Purpose: To compare the efficacy and safety of a slowly resorbable glaucoma implant, Healaflow (HF) and Healon 5 (H5) as spacers injected into failing filtration blebs at the time of bleb needlings, augmented with MMC Methods: Eighty-four glaucoma patients with filtration bleb failure following glaucoma surgery (deep sclerectomy/ trabeculectomy) underwent bleb needling using either HF (n=44) or H5 (n=40) as an intrableb viscoelastic spacer. All needlings were augmented by MMC and performed in the operating room, by a single surgeon. The choice between HF and H5 was randomised. Postoperative data for IOP, number of glaucoma medications (GMs), antimetabolite injections (AMIs), bleb morphology and all complications were recorded at day 1 (D1), weeks 1 (W1), 4 (W4), month 6 (M6) and last visit. Success was defined as IOP≤21mmHg and 20% reduction in IOP from baseline Results: Age was comparable between groups (HF vs H5; 66 vs 72 years; p=0.13*). There were no differences in mean postoperative IOP or GMs at any time point between groups (mean IOP = HF vs H5; prior to needling=19.8mmHg vs 18.7mmHg, p=0.48*; D1=10.4mmHg vs 10.2mmHg, p=0.85*; W1=12.3mmHg vs 13.8mmHg, p=0.33*; W4=15.7mmHg vs 15.1mmHg, p=0.69*; M6=14.3mmHg vs 13.8mmHg, p=0.69*. Mean GMs= HF vs H5; prior to needling=1.7 vs 1.7, p=0.96*; M6=0.9 vs 1.1, p=0.66*). Success rates were comparable between HF and H5 groups (74% vs 71%). Requirements for AMIs were similar between groups; post filtration surgery and prior to needling (mean AMIs 1.54 vs 1.65 p=0.82*) and within the first six months following needling ( 0.77 vs 0.65 p=0.70*). Complication rates were infrequent in both groups (9%, HF; 3%, H5) * two-sample t-test Conclusions: The early to mid-term success rates of needlings using intrableb spacers were high. However there were no differences observed between the use of crosslinked and high molecular weight sodium hyaluronate

High Molecular Weight Methacrylate Sealing of a Bridge Deck, HR-2031, Construction Report, 1988

The Iowa Department of Transportation used a high molecular weight methacrylate (HMWM) resin to seal a 3,340 ft. x 64 ft. bridge deck in October 1986. The sealing was necessary to prevent deicing salt brine from entering a substantial number of transverse cracks that coincided with the epoxy coated top steel and unprotected bottom steel. HMWM resin is a three component product composed of a monomer, a curnene hydroperoxide initiator and a cobalt naphthenate promoter. The HMWM was applied with a dual spray bar system and flat-fan nozzles. Initiated monomer delivered through one spray bar was mixed in the air with promoted monomer from the other spray bar. The application rate averaged 0.956 gallons per 100 square feet for the tined textured driving lanes. Dry sand was broadcast on the surface at an average coverage of 0.58 lbs. per square yard to maintain friction. Coring showed that the H.MWM resin penetrated the cracks more than two inches deep. Testing of the treated deck yielded Friction Numbers averaging 33 with a treaded tire compared to 36 prior to treatment. An inspection soon after treatment found five leaky cracks in one of the 15 spans. One inspection during a steady rain showed no leakage, but leakage from numerous cracks occurred during a subsequent rain. A second HMWM application was made on two spans to determine if a double application would prevent leakage. This evaluation has not been completed.

Urinary low-molecular-weight protein excretion in pediatric idiopathic nephrotic syndrome.

BACKGROUND: Minimal change disease (MCD) and focal segmental glomerulosclerosis (FSGS) are the most common causes of idiopathic nephrotic syndrome (INS). We have evaluated the reliability of urinary neutrophil-gelatinase-associated lipocalin (uNGAL), urinary alpha1-microglobulin (uα1M) and urinary N-acetyl-beta-D-glucosaminidase (uβNAG) as markers for differentiating MCD from FSGS. We have also evaluated whether these proteins are associated to INS relapses or to glomerular filtration rate (GFR). METHODS: The patient cohort comprised 35 children with MCD and nine with FSGS; 19 healthy age-matched children were included in the study as controls. Of the 35 patients, 28 were in remission (21 MCD, 7 FSGS) and 16 were in relapse (14 MCD, 2 FSGS). The prognostic accuracies of these proteins were assessed by receiver operating characteristic (ROC) curve analyses. RESULTS: The level of uNGAL, indexed or not to urinary creatinine (uCreat), was significantly different between children with INS and healthy children (p = 0.02), between healthy children and those with FSGS (p = 0.007) and between children with MCD and those with FSGS (p = 0.01). It was not significantly correlated to proteinuria or GFR levels. The ROC curve analysis showed that a cut-off value of 17 ng/mg for the uNGAL/uCreat ratio could be used to distinguish MCD from FSGS with a sensitivity of 0.77 and specificity of 0.78. uβNAG was not significantly different in patients with MCD and those with FSGS (p = 0.86). Only uα1M, indexed or not to uCreat, was significantly (p < 0.001) higher for patients in relapse compared to those in remission. CONCLUSIONS: Our results indicate that in our patient cohort uNGAL was a reliable biomarker for differentiating MCD from FSGS independently of proteinuria or GFR levels.

Removal of high-molecular weight polycyclic aromatic hydrocarbons

Alternatives for the removal of high-molecular weight polycyclic aromatic hydrocarbons (HWM-PAH) from soil were tested by adding fertilizer or glycerol, as well as the combination of both. Experiments were carried out for 60 days in reactors containing a HWM-PAH-contaminated soil (8030 μg kg-1), accompanied by pH monitoring, humidity control and quantification of total heterotrophic bacteria and total fungus. Fertilizer addition removed 41.6% of HWM-PAH. Fertilizer and glycerol in combination removed 46.2%. When glycerol was added individually, degradation reached 50.4%. Glycerol also promoted the increase of degradation rate during the first 30 days suggesting the HMW-PAH removal occurred through cometabolic pathways.

DFT study on low molecular weight α,α-ditert-butyl-4H-cyclopenta[2,1-b,3;4-b']dithiophene and α,α-ditert-butyl-4H-cyclopenta[2,1-b,3;4-b']dithiophene S-oxide bridged derivatives

The equilibrium geometries of α,α-ditert-butyl-4H-cyclopenta[2,1-b,3;4-b']dithiophene (DBDT) and α,α-ditert-butyl-4H-cyclopenta[2,1-b,3;4-b']dithiophene S-oxide (DBDTO) were studied at the DFT level of theory with a standard 6-311G* basis set. The molecular structures of the DBDT series were more planar than the corresponding DBDTO series, as revealed by dihedral angles. The UV-visible absorption calculated at TD-DFT/6-311G* showed two absorption peaks for all the molecules except C=S and C=O bridged molecules. In DBDTOs, C=S and C=O bridged molecules showed three and four absorption peaks, respectively. The DBDTOs had lower band gaps and longer wavelengths compared to the corresponding DBDTs.

Correlation between high molecular weight gluten subunits composition and bread-making quality in Brazilian wheat

Bread-making quality is one of the most important targets in the genetic improvement of wheat. Although extensive analyses of quality traits such as farinography, sodium dodecyl sulfate (SDS) sedimentation, alveography, and baking are made in breeding programs, these analyses require high amounts of seeds which are obtained only in late generations. In this experiment the statistical correlations between the high molecular weight subunit of glutenin and bread-making quality measured by alveograph, farinograph and SDS sedimentation were evaluated. Seventeen wheat genotypes were grown under the same conditions, each producing about 1 kg of seeds for the evaluations. The high molecular weight (HMW) glutenin subunits were analyzed by SDS-PAGE. Statistical correlations were highly significant between HMW glutenin subunits and alveograph and SDS sedimentation. These results indicate the possibility of manipulating major genes for wheat seed quality by coupling traditional breeding with non-destructive single seed analysis. Only half seed is necessary to perform the SDS-PAGE analysis. Therefore, the other half seed can be planted to generate the progeny. Seed yield and SDS sedimentation were statistically correlated, indicating the possibility of simultaneous selection for both traits

Humoral response to low molecular weight antigens of Mycobacterium tuberculosis by tuberculosis patients and contacts

Much effort has been devoted to the identification of immunologically important antigens of Mycobacterium tuberculosis and to the combination of target antigens to which antibodies from serum of tuberculous patients could react specifically. We searched for IgG antibodies specific for antigens of 45 to 6 kDa obtained after sonication of the well-characterized wild M. tuberculosis strain in order to detect differences in the antibody response to low molecular weight antigens from M. tuberculosis between patients with pulmonary tuberculosis and contacts. Specific IgG antibodies for these antigens were detected by Western blot analysis of 153 serum samples collected from 51 patients with confirmed pulmonary tuberculosis. Three samples were collected from each patient: before therapy, and after 2 and 6 months of treatment. We also analyzed 25 samples obtained from contacts, as well as 30 samples from healthy individuals with known tuberculin status, 50 samples from patients with other lung diseases and 200 samples from healthy blood donors. The positive predictive value for associated IgG reactivity against the 6-kDa and 16-kDa antigens, 6 and 38 kDa, and 16 and 38 kDa was 100% since simultaneous reactivity for these antigens was absent in healthy individuals and individuals with other lung diseases. This association was observed in 67% of the patients, but in only 8% of the contacts. The humoral response against antigens of 16 and 6 kDa seems to be important for the detection of latent tuberculosis since the associated reactivity to these antigens is mainly present in individuals with active disease.